Related
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
Hi...this mine "ExtROM"........I'm use it w/ my last WM6 ROM (based on LVSW's v2.0.1.1)....however i think that it should work on any rom (wm5 too...)
Its "particular".....I have inserted some useful programs BUT...nothing are installed (alias, copied to the device)!!...everything are alredy "installed" to extrom....
I'm created it for me....so, maybe its unuseful for everybody.....
Whatsuppen:
U download this archive.........................ok
Install it as a normal rom-update (HardSPL included).............ok
So....now, after an HardReset, when the "Customization" popup appears, ONLY some shortcuts will be copied into your device (20 kb), and a few registry tweaks will be also installed (1/2 kb)...........but when you'll enter in the "Programs" directory these programs will be present:
WMP Playlist Editor
PocketRAR v3.60
AltTab (from PocketPlus)
Adobe Reader LE
VJOkButton ("JustClick" only, i'm associate it to a button...)
Spb Full Screen Keyboard (not configurable...u can access to it only from "programs" menu's icon) U
IM+ v4.41 (without Today's PlugIn) U
Chronos v3.3 U
Resco Explorer v6.10 + FTP AddOn + ZIP AddOn (without regitry addOn/cript service/today plugIn) U
Resco Photo Viewer Standard v6.33 (without video support) U
SafeMode v2.1 U
SKTools Pro v3.1.9 (only the main program) U
GroupSMS
PIM Backup v2.5
NoData
iContact v0.2 (linked to the "Contacts" icon in Programs folder)
Call Firewall v1.2
CorePlayer v1.1.1 build 1600 (without SPB-support plugin) U
Some settings for these programs
Click to expand...
Click to collapse
Note:
U = ...unregistred!
Conclusion:
10mb of (useful) programs, but only 20kb of device's memory is used!
(update: 11/08/2007)
Tnks to volospin!
ax3l.volospin.com
MIRRORs: (Tnks to DeviLduck!)
http://www.live-share.com/files/252901/ExtROM_Plus_2.0.9.8.rar.html
...or
http://rapidshare.com/files/48320322/ExtROM_Plus_2.0.9.8.rar
Click to expand...
Click to collapse
this extRom, overrite all on original Ext?
psxsnake said:
this extRom, overrite all on original Ext?
Click to expand...
Click to collapse
yes.......
Can you share with us how to do it? Thanks!
Doesn't work with bepe's rom.
...works perfectly w/ any LVSW and mUn ROMs!
ExtRom Plus
this ExtRom working on my Pepes Germany Rom..
Hello AX3L. Is there any way to get this to work with other programs?
Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?
You need to go to the wiki and find the cab which will unhide the extROM for you. Then in the extROM folder click shortcuts
heltem said:
Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?
Click to expand...
Click to collapse
follow the skaramanga's procedure or HARD-Reset your device to start the "Customitation Process"
can you upload to some other site than megaupload and rapidshare?
varma_in_ap said:
can you upload to some other site than megaupload and rapidshare?
Click to expand...
Click to collapse
Where is the rapidshare link?
AX3L, I would like to add some programs to the rom befor installing it, can you give us a guide, and tool as needed?
thanks
...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message
AX3L said:
...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message
Click to expand...
Click to collapse
I was just wondering, how did you create the shortcuts into a cab file? I cannot seem to find your shortcuts.cab only shortcuts.cabtxt? I take it your shortcuts / registry settings are in shourtcuts.cabtxt? How did you create this file?
Also I cannot find your HSDPA /enable line in your config ?
Can ~WinCE Cab Manager create the shortcut/regedit cabs?
Nice Ext rom AX3L!
Could you possibly add the Resco Explorer Registry Add-in to the next one?
Then it would be perfect!
(update: 24/06/2007)
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar[/QUOTE]
am i blind or is there a download on this link?
please confirm my sanity
HI ax3l,
firstly thanks for your input and time, running sweeeetly.
maybe there are different chips for gps though as my m700 only has 'external gps' button??
also ref to your external rom
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar
have tried to use this link but cannot, please put me out of my misery and check it for me.
regards
martin
We know the way to enable P535's EXTROM in WM5 is setting mounthidden=0.
but it's not effective in WM6, I mean the WM6 is you upgraded by autorun.exe and asusp535.cap. not reflashed by Nb0 file. yes, the EXTROM can be enabled in the NB0 reflashed WM6, but nothing in it.
we also know all EXTROM files are embeded in the autorun.exe and easy to be extracted. but it restricted in the only 4 available ROMs listed in ASUS support site.
I have a 76A version P535, it preinstalled WM6 HK02 CHS, there is no corresponding autorun.exe to extract. the only way is enable the EXTROM and get the files inside.
so, anyone can help me enable the EXTROM?
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC2\FATFS
MountHidden=0
superpuper said:
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC2\FATFS
MountHidden=0
Click to expand...
Click to collapse
Thanks for the reply.
as I said in the first line in my post. this registry key only effects with WM5 or nb0 reflashed WM6. not effects the WM6 upgraded by autorun.exe and asusp535.cap.
windirt said:
Thanks for the reply.
as I said in the first line in my post. this registry key only effects with WM5 or nb0 reflashed WM6. not effects the WM6 upgraded by autorun.exe and asusp535.cap.
Click to expand...
Click to collapse
when i do the registry modification, i see a new folder but empty.
but i have a question : There are 3 registry foler with the same name
TRUEFFS_DOC . TRUEFFS_DOC1 . TRUEFFS_DOC2
what do the first one TRUEFFS_DOC? because this one is hiden to.
I upgraded to Schap's 4.00 RC ROM and found this 30737 version of HTC Network Wizard finally works with my hermes. However, due to some unstable situation of my phone, I had to downgrade to 3.60a. The Network Wizard of 1.0.29982 in 3.60a cannot recognise my operator.
I tried to dump the network wizard out of 4.00 RC, but this version seems totally changed, like provision.zip and .exe file size. I just don't know what are essentials should be ported to 3.60a.
Can any one guide me doing this or offer a CAB file?
I really appreciate your help.
Many thanks.
Registry
Doesn't seem any one have time, alternatively, could you please help me to check with the registry to see how Network Wizard is configured.
Please post all the keys with values under:
\HKEY_CURRENT_USER\Software\HTC\NetworkWizard\
thanks again.
Also i need this cab... i am using v.1.0.29981.1 and works well, but there isnt the NAME of the link under the ICON in setting->connections tab.
I've seen my registry:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\HTC\NetworkWizard]
"IMSI"="xxxxxxxxxxxxxxx"
"profile"="2228800"
"IOCTL_IPC_WINCE_RESET"=dword:00000000
"EnableAUTODetect"=dword:00000001
"EnableStartUP"=dword:00000001
"provision"="\\windows\\provision.zip"
...where xxxxxxxxxxxx is censured
SkizZO said:
Also i need this cab... i am using v.1.0.29981.1 and works well, but there isnt the NAME of the link under the ICON in setting->connections tab.
I've seen my registry:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\HTC\NetworkWizard]
"IMSI"="xxxxxxxxxxxxxxx"
"profile"="2228800"
"IOCTL_IPC_WINCE_RESET"=dword:00000000
"EnableAUTODetect"=dword:00000001
"EnableStartUP"=dword:00000001
"provision"="\\windows\\provision.zip"
...where xxxxxxxxxxxx is censured
Click to expand...
Click to collapse
thanks a lot. I will take a look...
Can anyone give me some insight on this problem. I am porting 21159 to the Treo 700wx, and it keeps stopping on the WM 6.5 startup screen. I can turn off/on the display, but it never progress onto screen calibration or anything else.
I have replaced the gwes.exe file in order to get the rom to boot, as well as wincenls_wwe, but it doesn't seem to make any difference. At the moment, I'm stumped. Any help would be greatly appreciated.
86 views so far, and no replies. That can't be good...
I think I might need a gwes.exe for 240x240 screen on a 211xx build. Does anyone have one?
Any progress?
untarded said:
Any progress?
Click to expand...
Click to collapse
Nope. No responses. I did find a 6.5 rom for the treo 750, but they removed all of the dsm files, so I can't port it. I have to try to manual piece it back together.
This is really a good build, but believe me that stabilniejszy is 21,109, this is fast
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
!Aman! said:
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
Click to expand...
Click to collapse
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
cruzzmz said:
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
Click to expand...
Click to collapse
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
!Aman! said:
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
Click to expand...
Click to collapse
sad to say dude of of the rom now have protection on it including urs so i cant use package tool to make it to SYS folder ....
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
Already tried this. Both are correct. It's not hangs on the boot screen. It's hanging on the welcome screen. Well it's not exactly hanging. I can still power it on and off. I still get the press the middle button to unlock thing. I can turn the radio on and off. It just never moves on from the welcome screen.
I pieced some of the 750 rom into my SYS. I noticed they had modified some of the .cpr files for 240x240, so I included those as well. Flashing now, we'll see what happens.
Update: Same problem. It stops at the welcome screen.
Tryed using my existing .rom folder, and shell32.dll and shellres.dll. Still no luck.
same problem since 21xxx builds with welcome-center
I'am a german rom-cooker for glofiish m800-device.
i work since over one week on windows mobile 6.5.
I'am not success today.
The Problem is:
- No Calibration (Welcome.lnk) is launched by initflashfiles.dat
but in the file the entry is included
the biggest problem, becouse the device is unusable
- The Startmenu is wrong, only a white screen open. (very small) no solution with gwes.exe from wm61 20924 sys.
- the grey taskbar on the today-screen
i have replaced gwes.exe from working windows mobile 6.1 sys 20924
i have changed shell.exe and shellres32.dll in shell-directory from sys
to change user.hv and default.hv from metadata
to delete user.hv and default.hv from metadata
to replace folder for shell
to replace folder for phone
to replace folder for redist.
to include wince.nls in sys-folder too
The wince.nls is in my xip (rom-directory) (my kitchen need the extracted version of xip.bin)
I don't know what the problem is.
I have ported XIP 21159 from Diamond, from TouchPro, from glofiish m700, from glofiish m500 and much more. I'am sure i use actually an VGA-XIP (from Diamond, 1.post in this Thread)
but i don't know which version this is (21139 or 21159 ???)
all the same problem.
i use my kitchen based on windows mobile 6.1 and included the g'reloc.exe from WM65 Kitchen (forwarder) and the wmreloc.exe.
since my kitchen is ready for wm65. all works great by compiling the new temp.dat (the flash-file for glofiish devices)
I read i must use the same sources for XIP and SYS !!!
But what are the same Sources ???
Can anyone send me an working 21159 XIP for VGA ???
When i try to port "Diamond Payload 21159" from XDA-Developers with Xipport and Xipporterex the xip is ok, but when i insert in my kitchen, the prog "buildos" stop their working, nothing happens in command-window.
So i'am very pleasent when you can send me an working source 21159 SYS for VGA and an working Source 21159 XIP for VGA...
i have big problem with windows mobile 6.5
acutally i try windows mobile 6.1 21114 there are the same problem.
the problem is, after os-logo no calibration screen come.
big problems to call "welcome.lnk"
only whenn i insert in wrong path to welcome.lnk the today-screen display ???
do you know this bug ???
here is the rgu of the welcome-center, i think it's not compatible with m800 ???
is this welcome-center new in the 21xxx-builds ???
over one week and no succed with wm65.
at the moment the same problems with wm61 21115
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:M SWelcomeCenter]
"0"="MSWelcomeCenter" ; class name
"1"="wcsan.exe" ; exe to launch
"2"=dword:1 ; perf hint (RAI_PERF_*)
"3"=dword:0 ; app type (?)
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CWelco meCenter]
"Disabled"=dword:0
[HKEY_CLASSES_ROOT\.wcml]
@="wcmlfile"
"Content Type"="text/html"
[HKEY_CLASSES_ROOT\wcmlfile\DefaultIcon]
@="browsres.dll,-6703"
[HKEY_CLASSES_ROOT\wcmlfile\Shell\Open\Command]
@="iexplore.exe file:%1"
[HKEY_CLASSES_ROOT\welcomecenterapp\DefaultIcon]
@="coreres.dll,-20797"
[HKEY_CLASSES_ROOT\welcomecenterapp\SelectIcon]
@="coreres.dll,-20798"
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Redirect"=":MSWELCOMECENTER"
[HKEY_LOCAL_MACHINE\System\WelcomeCenter]
"CmdLine"=""
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Group"=dword:1
hope you can help...
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Thanks
Everal
everal said:
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Click to expand...
Click to collapse
I had issues with it as well. I had to go back to using g'reloc.
hey guys any solution to this problem? I've been facing it on my Samsung i780.. damn this won't move past the Windows mobile logo.. yet it plays the welcome screen sound.. what a shame..
chef raven,
not trying to hijack your thread but can you please answer my PM.
i've been waiting for weeks now.
thanks