How do you get into the SPL on the diamond? How do you check what SPL you have after you flash it?
hello? It's just a simple answer for a newbie.
bugmenot said:
hello? It's just a simple answer for a newbie.
Click to expand...
Click to collapse
...set your device in bootloader and you'll see the concerning version!
The problem is i don't know how to get into bootloader. It's not like there's a readme or anything. Not even useful info from where I downloaded it.
I got it. Just press the volume down and power button.
Related
I've got the HTC P3300 for a few months now. I wanted to upgrade to WM6, which I did. Everything is fine.
Now I want to downgrade to WM5 WWE, but it doesn't work.
My pda is not sim-locked, but it still fails. There are a lot of threads regarding this, so I wont ask this, but ..... What the h*ll is CID lock?
I have read a lot about this, but I don't understand. Where is it good for, why can I upgrade, but not downgrade?
Please, can someone explain this in a simple yet effective manner to me?
Hope to read soon,
With regards,
Ronald.
And bootloader?
oh, yes,
What is the bootloader mode? How do I get there, and what does it do?
If you want to know specific what CID is and why to run USPL, you should ask the master-mind behindt the prog. him selv (Clik on "USPL" further down.
If you have the correkt original ROM made for you unit it should not be a problem to run it without using USPL. But personally i use this genius lille flash (just in case) - Why take any chance
Follow thise instruction and it should go great
Hard reset your device
Run USPL - klik here for further explanation
Run upgrade / Downgrade
rljb1804 said:
oh, yes,
What is the bootloader mode? How do I get there, and what does it do?
Click to expand...
Click to collapse
Here you can see hov to access bootloader..
I have downgraded my orbit easily after running USPL utility. This utlity is to temporary unlock the phone. Please try to downgrade or upgrade after this tool run to unlock CID
(The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears)
MicTh said:
Here you can see hov to access bootloader..
Click to expand...
Click to collapse
just to point this out because a friend of mine misunderstood this: this wiki article shows both how to do a hard reset and also how to enter bootloader. you dont have to do a hard reset first to enter bootloader. just do what abshie wrote (even though i dont think pressing the power button is necessary).
You are right
soardiac said:
just to point this out because a friend of mine misunderstood this: this wiki article shows both how to do a hard reset and also how to enter bootloader. you dont have to do a hard reset first to enter bootloader. just do what abshie wrote (even though i dont think pressing the power button is necessary).
Click to expand...
Click to collapse
I just mentioned the way to enter boot loader is because he asked for it.
No need to do anything in the bracket to upgrade or downgrade OS.
Just run USPL and you can easily do it.
ronald
rljb1804 said:
oh, yes,
What is the bootloader mode? How do I get there, and what does it do?
Click to expand...
Click to collapse
you use the bootloader mode for... well, for upgrading and downgrading your ROM, for one thing!!!
you can always downgrade, but remember, first you must run the USPL each time you want to change your rom. then you won't have a problem. you don't even need to downgrade to your original rom, unless you bricked your device. but if you didn't brick it and you just want to change/downgrade your rom, just run USPL first then flash your device with your choice rom!
Sorry my english.
When I was putting a new room and asked to reboot never took on. Appears on screen:
IPL 3.13.0001
SPL 1.11.0000
GDM 02.94.90
OS 3.13.0.0
What to do now? How do the bootloader?
READ BEFORE POSTING
All´s is in the wiki.
ark666 said:
READ BEFORE POSTING
All´s is in the wiki.
Click to expand...
Click to collapse
I don't found anything about this problem, i have also got a ARTE100 with IPL 3.13, and i can start it or charge it on power...
I don´t understand what you say. I need help.
ark666 said:
READ BEFORE POSTING
All´s is in the wiki.
Click to expand...
Click to collapse
AsusA5EB said:
I don´t understand what you say. I need help.
Click to expand...
Click to collapse
AsusA5EB, your ARTEMIS is dead, i've exactly the same problem since 3 weeks.
You can try, to enter in bootloader : http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
I think u should tell us what rom u flashed on your device in the first place.
Flash original rom to solve the issue, if not, u can use mtty to reset flash, and then install your original rom.
U guys already know that before flashing ANY rom besides your local CID, U MUST UNLOCK IT BY USING USPL.
Like i told u, all´s in the WIKI.
Hi there...
Do not worry your phone is not dead.
Read some things about USPL and than if it doesn't helps (and it won't, because I presume that you can't synchronize it with active sync), read something about MTTY and how to use it.
Be patient, read carefully and you'll make it.
By looking on your report from splash screen I can see that you have done USPL....but it went wrong.MTTY will solve your problem.
Spend some time reading and you'll do it.
Cheers
Z
zikizile said:
Hi there...
By looking on your report from splash screen I can see that you have done USPL....but it went wrong.
Click to expand...
Click to collapse
How can you tell USPL went wrong? I have the same IPL & SPL values in my device and everything looks good..
Ok, my phone is dead, the screen was break avec the power switch is dead....
ark666 said:
I think u should tell us what rom u flashed on your device in the first place.
Flash original rom to solve the issue, if not, u can use mtty to reset flash, and then install your original rom.
U guys already know that before flashing ANY rom besides your local CID, U MUST UNLOCK IT BY USING USPL.
Like i told u, all´s in the WIKI.
Click to expand...
Click to collapse
Hi,
Can you please tell me which ROM, RADIO do you use for ARTEMIS?
Thanks.
Hey,guys.If I get the MFG ROM of EVO 4G,does it means I can get root by flash it?
And did anyone got the usb diver of the phone?How can we use the bootloader?By pressing the volume down+Power button？
I also wondering how could I unlock the phone,I mean how to get the correct SPC.
Thank you for help!!~~~
Alex.xu said:
Hey,guys.If I get the MFG ROM of EVO 4G,does it means I can get root by flash it?
And did anyone got the usb diver of the phone?How can we use the bootloader?By pressing the volume down+Power button？
I also wondering how could I unlock the phone,I mean how to get the correct SPC.
Thank you for help!!~~~
Click to expand...
Click to collapse
if u find a ruu with the EVO engineering SPL then u just saved the day
toast, how can you tell if an RUU has an engineering SPL?
i can tell the second i look at it. please anyone who has another RUU let me know. it could unlock the nand protection if its a ENG SPL
the good old days
Hi
Sorry if I am repeating a question that has already been asked. But ive seen this question asked but nobody ever answers it they just go off on a tangent lol.
Is there a simple way to check what bootloader you are using, and what bootloader a specific ROM is using. Please dont ask me why it is a very very very long story lol But i do need to know.
Thanks
klashnikoff said:
Hi
Sorry if I am repeating a question that has already been asked. But ive seen this question asked but nobody ever answers it they just go off on a tangent lol.
Is there a simple way to check what bootloader you are using, and what bootloader a specific ROM is using. Please dont ask me why it is a very very very long story lol But i do need to know.
Thanks
Click to expand...
Click to collapse
power off your phone, press power+vol down...take a look at the hboot version and that is the bootloader version...and in every rom thread you can see which bootloader version you need to run it
matt95 said:
power off your phone, press power+vol down...take a look at the hboot version and that is the bootloader version...and in every rom thread you can see which bootloader version you need to run it
Click to expand...
Click to collapse
You are a genious! I thought as much and when i asked this question is the hboot the bootloader version i got a load of angry developers saying "NO ITS NOT" so thanks for clearing things up.
klashnikoff said:
You are a genious! I thought as much and when i asked this question is the hboot the bootloader version i got a load of angry developers saying "NO ITS NOT" so thanks for clearing things up.
Click to expand...
Click to collapse
well, to be able to run the latest JB's rom you have to be on hboot 1.28 just to be clear
Hi all,
I just joined this website. I got a HTC Desire HD, with Cyanogemod from this website cyanogenmod.org
Since yesterday its stuck in boot screen. The cyanogenmod booting animation keeps going forever. I got into the recovery mode once, and somewhere on another forum someone wrote that I had to click Fastboot. But now I cant get into recovery mode anymore, and my phone wont boot too.
What can I do to make my phone work again?
All help is highly appreciated!
Please provide what steps you followed before current state of phone, are you s-on or s-off, bootloader unlocked or not etc. So that it will be easy to understand the state of ur phone and helo
Sent from my SCH-I535 using xda premium
ramdesai said:
Please provide what steps you followed before current state of phone, are you s-on or s-off, bootloader unlocked or not etc. So that it will be easy to understand the state of ur phone and helo
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Hey ramdesai,
I really appreciate your post(and it was really fast too). It was a long time ago that I put Cyanogenmod on my phone, and I used some tutorial to do it. I think this was the tutorial that I used. I also don't know what s-on or s-off is. techgeekal.com/2013/01/14/cyanogenmod-10-1-jellybean-4-2-1-for-htc-desire-hd/
Edit: i know my phone had its original OS before cyanogenmod
Bram012 said:
Hey ramdesai,
I really appreciate your post(and it was really fast too). It was a long time ago that I put Cyanogenmod on my phone, and I used some tutorial to do it. I think this was the tutorial that I used. I also don't know what s-on or s-off is. techgeekal.com/2013/01/14/cyanogenmod-10-1-jellybean-4-2-1-for-htc-desire-hd/
Edit: i know my phone had its original OS before cyanogenmod
Click to expand...
Click to collapse
Are you S-OFF or have an unlocked bootloader? if you don't know that then I suggest you do some reading first. There is a guide in my signature where you will find all that stuff.
Check the hboot and see what it says...it is not the same installation for S-OFF than being unlocked
glevitan said:
Are you S-OFF or have an unlocked bootloader? if you don't know that then I suggest you do some reading first. There is a guide in my signature where you will find all that stuff.
Check the hboot and see what it says...it is not the same installation for S-OFF than being unlocked
Click to expand...
Click to collapse
I have read your document, but I understand almost nothing of it.
I am very sorry, im noobish at Android and stuff. Can you tell me how to check these things? Many thanks
Anyone? I really need my phone.
Bram012 said:
Anyone? I really need my phone.
Click to expand...
Click to collapse
I already told you what to do. A good piece of advice is to avoid messing around your device if you don't get what you are doing....when you are online let me know and we can arrange so I can connect to your PC via teamviewer to have a look at it.
glevitan said:
I already told you what to do. A good piece of advice is to avoid messing around your device if you don't get what you are doing....when you are online let me know and we can arrange so I can connect to your PC via teamviewer to have a look at it.
Click to expand...
Click to collapse
Hi, I am online now.
Bram012 said:
Hi, I am online now.
Click to expand...
Click to collapse
Bram, sorry I am kinda busy right now at the office....what about a few hours from now? I am in Argentina with GM -3 now it is 6:10 PM, is it ok if we arrange for about 8:00 PM?
glevitan said:
Bram, sorry I am kinda busy right now at the office....what about a few hours from now? I am in Argentina with GM -3 now it is 6:10 PM, is it ok if we arrange for about 8:00 PM?
Click to expand...
Click to collapse
Hi, you are such a good person that you are willing to take the time to help me. I really appreciate that. It is midnight now, so I need to go sleep. Will post here when I wake up.
Reboot into hboot by holding power and volume-down. What does it say?
has supdlco
It got fixed by teamviewer. thanks!
Hiho , i have a problem that my DHD wont start anymore after installing the newest update of the Jelly Time ROM.
USB Debugging is off and i cant turn it on and fastboot was allready on before i flashed it.
If i connect the device to my PC the CWM starts but i cant select wipe/factory reset by pushing the power button because the device will boot then.
Pixelmonteur said:
Hiho , i have a problem that my DHD wont start anymore after installing the newest update of the Jelly Time ROM.
USB Debugging is off and i cant turn it on and fastboot was allready on before i flashed it.
If i connect the device to my PC the CWM starts but i cant select wipe/factory reset by pushing the power button because the device will boot then.
Click to expand...
Click to collapse
S-Off or S-On? Unlocked bootloader?
bananagranola said:
S-Off or S-On? Unlocked bootloader?
Click to expand...
Click to collapse
allready fixed it, my VOLUM - button is little bit buggy i had to press it harder to enter the ACE hack kit