Can somebody explain activesync connection?
Should I copy the exe files to my phone and run from there?
or is it ok if i run from my pc?
namida85 said:
Can somebody explain activesync connection?
Should I copy the exe files to my phone and run from there?
or is it ok if i run from my pc?
Click to expand...
Click to collapse
...If it is a *.cab file: copy 2 phone and run if from the phone
...if it is an exe: copy 2 phone and run if from the phone
...if it is an "Windows" installer: Open it from your PC and the cab file will be automaticly installed on your phone!
Thanks,
HardSPL,radio and rom are exe files right?
Related
i got this rom from ftp xda dev
how to extract it? and upgrade with MaUpgradeUt_noID.exe
thanks
Open it with winrar
louisboo said:
i got this rom from ftp xda dev
how to extract it? and upgrade with MaUpgradeUt_noID.exe
thanks
Click to expand...
Click to collapse
Extract with winrar.
Use nk.nbf, ms.nbf and radio.nbf. use all or just use the .nbf that you want to upgrade. put them into the same directory (folder) as your MaupgradeUt_noID as just run it.
Before that tho' put your phone on bootloader mode and connect to pc
via usb cable.
zaheer said:
Extract with winrar.
Use nk.nbf, ms.nbf and radio.nbf. use all or just use the .nbf that you want to upgrade. put them into the same directory (folder) as your MaupgradeUt_noID as just run it.
Before that tho' put your phone on bootloader mode and connect to pc
via usb cable.
Click to expand...
Click to collapse
i know how to upgrade my dopod with tmobile rom and MaupgradeUt_noID, only in jasjar rom my winrar no selection exctract file here.
what u winrar version?
use winrar 3.61! You can run this then go to temp folder to search the files!
yingzhou said:
use winrar 3.61! You can run this then go to temp folder to search the files!
Click to expand...
Click to collapse
Thanks, problem solved.
I wanted to extract a CAB file from a windows .exe file. How can I do it? I wanted to extract the CAB file for easy installation without running it from my computer.
cktlcmd said:
I wanted to extract a CAB file from a windows .exe file. How can I do it? I wanted to extract the CAB file for easy installation without running it from my computer.
Click to expand...
Click to collapse
Very easy,
launch the executable from your pc without the ppc connected to the pc.
Activesync will be launched, it will try to connect to the device and will say that the application will be installed next time the ppc will connect.
Go into c:\program files\microsoft activesync\[application]
you will get your cab file
Then
go into registry HKLM\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnConnect
and remove the value : CEAppMgr
Cheers,
.Fred
dotfred said:
Very easy,
launch the executable from your pc without the ppc connected to the pc.
Activesync will be launched, it will try to connect to the device and will say that the application will be installed next time the ppc will connect.
Go into c:\program files\microsoft activesync\[application]
you will get your cab file
Then
go into registry HKLM\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnConnect
and remove the value : CEAppMgr
Cheers,
.Fred
Click to expand...
Click to collapse
Thanks very much.
is it possible to do the extraction on ppc without the pc
AbuYahya said:
is it possible to do the extraction on ppc without the pc
Click to expand...
Click to collapse
Since the executable is a PC application, I don't think you can except if you know exactly where the cab file begins and ends in the setup. I think the simpliest thing to do is what I mentioned.
Cheers,
.Fred
CAB extract
you can also extract CAB files from EXEs using WinRar.
Just right click on the A.EXE file and you will see *extract* (if you don't see this option, then you can't extract the file - I had this problem with MS Voice Command 1.6)
Once the A.EXE has been extracted to your desired folder on the desktop PC, you can then find the CAB file and simply copy this to your PPC (without having to use anything like ActiveSync or installing any software on to your desktop PC). Run the CAB file on your PPC to install.
I hope the above helps!
firstbuddha said:
you can also extract CAB files from EXEs using WinRar.
Just right click on the A.EXE file and you will see *extract* (if you don't see this option, then you can't extract the file - I had this problem with MS Voice Command 1.6)
Once the A.EXE has been extracted to your desired folder on the desktop PC, you can then find the CAB file and simply copy this to your PPC (without having to use anything like ActiveSync or installing any software on to your desktop PC). Run the CAB file on your PPC to install.
I hope the above helps!
Click to expand...
Click to collapse
or you can run the exe with the ppc connected ,make sure that you have a sd card in the device.the promp comes up asking were you want to install the app, do nothing,got start, file explorer and browse to; windows\appmgr [in the ppc] and your cab file will be there in a folder,simply copy to another location.then go back and cancel the installation
just a thought, the ppc application might be installed in its own folder in program files not necessarily the activesync folder so u'd find the cab file there..
I always extract files from a CAB file with WinCE CAB Manager to make the installation easier and make the application install to Whichever folder I want.But some files of the applications must be put into some folders,such as \Windows,\Appliction Data.And I will know what the installaion do to the registry.
I found it impossible to extract a CAB file from a windows .exe file on PPC,and extract files from a CAB file without installation on PPC is also impossible.
Howto extract Cab. file from EXẸ file in linux
Bcause I am now using linux laptop(fedora6). So does anyone know which app in linux can extract CAB. file from EXE file ?
gerisgame said:
So does anyone know which app in linux can extract CAB. file from EXE file ?
Click to expand...
Click to collapse
Just use the cabextract utility.
I can not extract EXE file by using cabextract
I try cabextract tool, but this tool only extract .CAB file, it can not use for extract .EXE file. What I want is a tool in linux can extract an windows .EXE install file to .CAB file so that I can install ppc software directly from my linux machine. Any suggestion? THX advanced.
extract PPC CAB in Linux
It's not a 100% pure Linux solution, but this works for me. I have tested this on my Edgy Eft Ubuntu box. I don't know if it will be the same on Fedora, but it should be similar.
Get the latest Wine install from winehq.org. I got rid of my old .wine folder to make sure I was using a clean install, so you shouldn't have to do any additional installs or tweaks to wine.
Disclaimer: Don't expect this to work for actual syncing, only for getting the CAB files.
Get a copy of ActiveSync and install it under wine. I tried versions 3.0 and 4.2 and both worked. The version 4.2 installer failed at the end trying to update some USB drivers, but the files were all there and worked.
Again using wine, run your PPC installer program that you want the CAB from.
Like earlier posts in this thread pointed out, the CABS should end up in a subfolder of C:/Program Files/Microsoft ActiveSync. On my system, these are under my .wine/drive_c folder.
Good luck,
Andy
thank you Andy,
I will try in my fedora and post the result as well.
OK, I saw cab files it in ./wine/Microsoft Activesync folder. Thank again Andy.
extract .cab in linux -
synce.org , orange tools
gerisgame -- I'm glad it worked for you! If you don't mind compiling from source, the Orange tools kevit specified work without all the Wine/ActiveSync business.
kevit -- Thanks for your comment about Orange tools. I had been over at the synce.org but never saw them.
Once I had the right libraries, they built cleanly and work like a charm on the files I've tried.
Andy
Orange and synce
Thank you both Kevit and Andy, I will try that way. If it works, it is more straight and better way.
I try Orange tool in my fedora laptop, but it does not work, belows is my command line:
[[email protected] Pocket2005]$ orange pqdvd.exe
-------
0 files
I can not find a documentation for orange tool, pls help. THX
I thought that pqDVD was a regular desktop application.
If so, orange tools probably won't help. pqDVD may install and run under wine, though.
I see many people's whant the stantar Microsoft windows update in cooked rom's.
So i manage to make a cab with all the files,
in my device work's well.
Also with this .reg file you can enable the customer feedback in settings menu.
Just rename the .txt to .reg and run it in your device with your fav registry explorer.
Try it and post your result.
(Sorry to open a new thread but i didn't know where to post it so all user's can find it).
Work's only in wm6
EDIT:
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
Click to expand...
Click to collapse
Thank's
Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....
flashmp3 said:
Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....
Click to expand...
Click to collapse
Hello...
I never see the audio booster work's in trinity device...
So i dont know if it is work's at all.
I try some ways but with no sucess...
Maybe someone else can help with audio booster.
Sorry for that.
Thanks for the cab file, BUT does update anything?
Cab file no longer shows for me
Was there, clicked on it and told it's not there.
Scratch that it's back again... Funny 5 mins I guess.
taiseer999 said:
Thanks for the cab file, BUT does update anything?
Click to expand...
Click to collapse
What did you mean ??
Doesn't search for update's???
If not i have another solution...
doesn't work for me!! I receive connection error while I'm connected either through wifi or activesyn
I get the same error message
same error for me
Ok so try the way i did..
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
This method i follow and work's.
Thank's
Thanks ausdim, now it works.
alnajmi said:
Thanks ausdim, now it works.
Click to expand...
Click to collapse
Ok that is good news...
So for now we can install the autoupdate or not...
Thank's for trying.....
For AUSDIM
Hello,
I test it and all are OK !!!
You are the best of CAB.
Private69.
@++++
Config Loader gives to me an exception as soon as I load mxipcold_autoupdate_100.provxml.
Exactly UnauthorizedAccessException.
For GDT
Hello,
You must extract File By WinZIP in PPC not Extract On Your computer.
Private69.
@+++
I did so...
for GDT
hello,
Process :
First Copy The file config.zip on you SD Card.
Search Winzip on your PPC and Open Config.zip with it.
And extract this 3 files : mxipcold_autoupdate_100.provxml
Config Loader.exe
Microsoft_Windows_Update.cab
On your SD card.
After
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
And All OK !!!
Private69.
@+++
private69 said:
hello,
Process :
etc... etc...
Private69.
@+++
Click to expand...
Click to collapse
It was exactly what I did. The only difference is that I've previously installed WindowsUpdate.CAB (before ausdim posts the fix) and I can't uninstall it...
I've tried to unzip files on PC and then put them in sd via ActiveSync and to unzip files directly form the sd card via ppc unzip. I get no changes.
To GDT
Uninstalling doesn't work from the first time, try once more and it should work.
I get error message with config loader
I want to extract the HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe in order to get the EXCAIMG.nbh file.
The means? To copy it to a FAT32 formatted SD, plug it to the phone in bootloader mode and see if it works!
1- Install win rar
2- Extract the file
Voila
.NBH has been created
buttrwp said:
1- Install win rar
2- Extract the file
Voila
.NBH has been created
Click to expand...
Click to collapse
You been diggin in the garveyard, watch out you wake the dead
tryed
I try using winrar and its not working
It is easy:
run the update (no need to connect the device)
wait for the unpack and first prompt
go to your temp directory (XP: <profile>\Local Settings\Temp\
find the latest created directory (some temporary name)
get the nbh from there.
tobbbie said:
It is easy:
run the update (no need to connect the device)
wait for the unpack and first prompt
go to your temp directory (XP: <profile>\Local Settings\Temp\
find the latest created directory (some temporary name)
get the nbh from there.
Click to expand...
Click to collapse
and how to extract in windows 7 64bit?
Solution
mobileclinic_14 said:
and how to extract in windows 7 64bit?
Click to expand...
Click to collapse
Go to
c:\users\<your user's name>\AppData\Local\Temp
Check thru date the last created directory
Don't forget to open first the update.
If you can't see the AppData directory, you need to change the folders settings to see hidden system files.
regards
wehnever i transfer any cab file to my phone and click the installatio file, a messege always popped out on my vista laptop saying that "windows can not open this file" and asked me to choose an program to run this file. How do i solve this problem?
You must install the cab files from the phone and NOT from the pc.