Develop Bugs

MyFaves icon went red-X

I'm sorry to do this. I'm just burnt out on searching today. The icon on my MyFaves panel (the five circles icon) decided to go AWOL today. All the icons appear to be intact in the Windows directory. What do I have to edit to get rid of the damned red "X"?
Only thing I've done differently was update CHome Configurator and CHome Weather. I'm not blaming them since they really don't deal with the icon. I just can't think of anything else I've done.

Go to HKLM\Software\Microsoft\CHome\MyFaves and edit the iconpaths location to where your pic is. The first pic in iconpaths is when your window is active and the second pic location is when your window is inactive. Your pic is probably in your \Windows directory. Hope this helps

(just in case I wasn't clear, here's a capture)
I gotta get off this thing for the night.

the iconpaths key has the value "4605;4604".
What does that translate to?

beartard said:
the iconpaths key has the value "4605;4604".
What does that translate to?
Click to expand...
Click to collapse
Do you have the My Fav icons in your windows folder?
if yes, then change the link in the iconpaths to the MAIN "my fav" icon in both reg address'

In the brozeres.dll, the picture files for iconpaths are predefined (meaning they are preloaded, so you don't have to do jack to have your screen be complete).
You can change their paths to whatever you want and that image will replace what the bronzeres.dll days that iconpath should be.
So if you want your active icon to be a color image of My faves icon , and your inactive to be a black and white image of the same, then it would look something like this:
iconpaths:
\Windows\youractiveimagename.png;\Windows\yourinactiveimagename.png
Just make sure whatever image you replace IS located in the place you entered in your registry. It's that easy. Takes like 5 minutes, just type in location drop pics in location (if not already there) and reboot or run your weather update and reload homescreen (might have to change layout, not sure about that). That's it.

I owe you a beer.

One day, my friend.

Oh sure he gets the beer but i dont?
Fine next time ill write a page long way of fixing your issue. lol

Hell, get us all together and the first round's on me.

A clue, perhaps?
beartard said:
I'm sorry to do this. I'm just burnt out on searching today. The icon on my MyFaves panel (the five circles icon) decided to go AWOL today. All the icons appear to be intact in the Windows directory. What do I have to edit to get rid of the damned red "X"?
Only thing I've done differently was update CHome Configurator and CHome Weather. I'm not blaming them since they really don't deal with the icon. I just can't think of anything else I've done.
Click to expand...
Click to collapse
Okay, the MyFaves pics on the collapsed panel are now X's on my phone.
The pics/icons in the expanded panel are fine.
I believe I have found a clue:
Thinking it might reset the collapsed MyFaves pics/icons panel, I
thought I would change the home screen to something else, reboot, then
change it back and reboot again.
But the home screen layout wouldn't change! So I scrolled through the
home screen settings and discovered duplicate fields on the settings
page for "Home screen layout" and a couple of other fields.
If I changed the layout in the second occurrence (or both occurrences) of
the "Home screen layout" field then the change would occur, but not if
I changed it only in the first occurrence of the field.
Oddly enough, sometime over the weekend the duplicate fields
disappeared but collapsed My Faves panel still displays the X's
rather than miniature pics/icons MOST of the time. Occasionally a
single mini-pic will appear, not always the same one.
Obviously something about the Home Screen settings has become
corrupted.
Here's where maybe XDA developers can help. I'm thinking that the various
home screen layouts must be templates into which a user's unique
settings are imported.
For example, you and I (and everyone else) have identical templates
for, say, the "T-Mobile default" layout. Our unique settings (My
Faves people and icons/pics, Weather app city, etc) are properties imported into the template before (or as) it is displayed in the panel. If someone could find out what file(s) comprise the "T-Mobile default" template, someone
might be able to either tell us how to fix the corruption or post the uncorrupted template file(s) copied from another Dash phone.
Now, while online with my Dash to Tmo this past weekend through Web2Go
I came across a support screen that listed support for "missing
MyFaves app". Unfortunately that link led nowhere (dead). Now I can't even find the page, but obviously T-mo does recognize a missing MyFaves app as an issue, so it may be possible to restore our missing icons/pics to the collapsed MyFaves panel by reinstalling the MyFaves app.
I'm not sure this is relevant, but this occurred after a couple of aborted attempts to install Opera, then Mini Opera. Eventually I got Mini Opera installed.
Distinguished XDA developers, I know many of you think the MyFaves app is useless but some people like having it, so any help that you can provide is greatly appreciated!
-GoJ

TouchFlo3D All Programs list not sorted properly

Hi All,
I got my TP2 at the weekend, and am very impressed - I've moved across from my Palm Treo 650, and am pleasantly surprised by how good WM6.1 is.
I have one problem - while fiddling at the weekend, I turned off TouchFlo3d and while it was off I installed a couple of apps (iSilo and eReader). When I reenabled TF3D, these two apps appeared at the bottom of the "All Programs" list in TF3D, rather than being in alphabetical order. I tried uninstalling and reinstalling them with TF3D running, but they won't budge from the bottom of the list.
Before I hard reset and start again from scratch, is there a config file or a registry setting I can manually hack to put these in their rightful place in the menu order?
Many thanks in advance,
Simon
PS Has anyone else noticed that you can use the magnet in the supplied pouch to fool the keyboard slide switch? With the TP2 asleep, touch the USB port on the bottom against the HTC logo on the flap of the case - best thing is to put the case flat on the desk, and then lower the TP2 vertically towards it. Watch as the TP2 comes on and rotates its display...

Locate the program. Then copy the program by: tap-holding the program and selecting copy.
Then you go to the following map: windows/startmenu.
Then past Shortcut there by tap-holding again and choose: paste shortcut.

Sorry - that doesn't fix it. The shortcuts are already present in Windows\Start Menu, so pasting them in again has no effect. The problem is the order in which the programs are displayed in the All Programs menu, which I suspect is controlled by a registry setting or a config file somewhere.

The last programs start with a small letter, the rest starts with a capitol.
Just change the first letter in a capitol, and it will sort correctly.

Ah - that sounds very promising! I'll give it a try...

That totally did the trick! Thanks!

I had the same question, thanks for posting this!

double listing in All Programs
I had the same problem (eWallet - changed to EWallet and it sorted properly).
I have another problem though. While moving things in my Start Menu into folders, I ended up with Abode Reader listed twice in the All Programs menu. How can I remedy this?
You guys are great - thanks for all the help!

New Touch Pro2 Owner with a couple of questions

Hi guys-
this is really a great forum - thanks for the great work! Excellent help for a TP2 newbie.
Touch Pro2 impressions: I just upgraded (vzw) from my ancient (and yet incredibly reliable) Motorola Q, and this thing is truly awesome. I used a Touch Pro almost a year ago, and returned it because it felt sluggish and a bit buggy. I think the 2 is a major improvement. Very responsive, great phone and speakerphone, great wifi and bluetooth and gps, great keyboard (but no tab key?), better battery, surprisingly inexpensive.
Questions that I couldn't find answers to in previous threads:
1. Reminders: I see that the calendar reminders do not allow any option for changing the snooze time - it is just 5 minutes. Weird, as my WinMo 5 Q would let me choose a range of time, from 5 minutes up to a week, as I recall. This is disappointing. But even more disappointing is that when it is attached via usb to my pc, synched, and a reminder pops up in Outlook (2003), I can snooze on the PC, but that snooze does not synch with the TP2. Any ideas or suggestions? This is actually very frustrating.
2. Calendar: I have seen screen shots of the day view that has weather, even for future dates. I don't have that - anyone know how to enable?
thanks in advance for any help!

This worked for me to get the snooze options back:
Start a registry editor and navigate to key:
HKLM/System/Shell/Notification/OEM
Change the value of CustomUIDLL from NotificationLayout.dll to NotificationLayoutNew.dll
Just add New, it won't find that .dll and starts the old interface, with the snooze option.
Don't forget, after the registry change, turn the TP2 off and back on to activate.

Regarding your question about the weather forcast in the calendar day-view, you need to set your city in the World Clock screen (ie, tap the large clock on the Home tab).

There's a great hack (cRaCKwHoRe's Snooze Options) which gives you the snooze options back.
Also worth looking at are "InboxExtender", (allow read all, delete al options) and "Smaberg X1 Powerbutton 12 icons actionscreen" (12 options on holding the power button down)

You guys rule!
@itm - reg fix works great - thanks
@ohyeahar - that's it, thanks
@en_croute - I will try it as soon as i get some time, sounds useful, thanks

Weather not shown on current date
ohyeahar said:
Regarding your question about the weather forcast in the calendar day-view, you need to set your city in the World Clock screen (ie, tap the large clock on the Home tab).
Click to expand...
Click to collapse
I just noticed that the current weather is not shown for me either.
I do have a city selected. In the "day" view on the calendar is just shows the single appointment I have. If I change to yesterday. I do see a weather picture. I went to the TF3D weather tab.. it was initially blank.. it updated and showed the current weather. I went back to the calendar view.. still nothing for "today". Only yesterday. Any ideas?

What is a good registry editor?
Never used one before and I need to find one so I can get my battery icon back after doing Battlevel.cab .

d1hamby said:
Never used one before and I need to find one so I can get my battery icon back after doing Battlevel.cab .
Click to expand...
Click to collapse
PHM_Regedit or Total Commander are the two most recommended ones here.
PHM is a little easier to navigate/use (mostly due to visual elements), but Total Commander also has a full set of file-explorer functions that PHM does not. Both are free.

Thank you so much sirphunkee. I was beginning to think nobody talked to newbies on this forum. I'll definetly be looking both of these up.

Okay I looked at both of them and downloaded the PHM_Regedit. Now I can't figure out if I should use MyMobiler to drag the Zipped cab file over or if I should unzip it first? When I unzipped it it did not look like a cab file. Does this work on a Sprint phone? Some of the cabs don't work on a Sprint phone. I'd hate to do another hard reset to get it to work like it is.

d1hamby said:
Okay I looked at both of them and downloaded the PHM_Regedit. Now I can't figure out if I should use MyMobiler to drag the Zipped cab file over or if I should unzip it first? When I unzipped it it did not look like a cab file. Does this work on a Sprint phone? Some of the cabs don't work on a Sprint phone. I'd hate to do another hard reset to get it to work like it is.
Click to expand...
Click to collapse
Hey there, no problem...we were all new here at one point, and asking the same types of questions
I'm not sure what source you downloaded it from, so I'm not entirely sure how it might have been packaged, but I would have guessed it should have just been a regular .cab file inside of a .zip. Either way, you can just download and use the cab I've attached here, I can confirm this one works just fine.
You can use MyMobiler to drag the cab over to your phone (it drops it in your "my documents" folder by default), and it will start the install automatically for you. Once you have it installed, you'll just find the icon to run it in your regular list of programs. And yes, it will work just fine on the CDMA (Sprint/Verizon) versions of the TP2...it's specific to what type of processor your phone has, not what type of radio.
Now, if you're not entirely familiar with registry editing, it's a good idea to read up on it a bit...it's very simple to do, but also very simple to create issues by doing the wrong thing. Also, it's always a good idea to create a backup of your registry (PHM can do that for you, just store it the backup on your SD card for safe keeping), in case anything goes wrong, you can just revert back to the working version

In search of tweaks...

Please, can anyone help?
I just recieved a new Verizon Touch Pro 2 and am trying to find the tweaks to set it up the way I would like. Frankly, I have spent hours looking and have not been able to find everything. Yes, this is cheesy and weak, but I am just burned out.
I am looking for some help on how to:
1. Change the 'Start' menu to use small fonts and work more like the standard Start menu (I do not use the Touchflo interface)
2. Disable word complete when using the keyboard. My ham hands keep messing things up.
3. Unlock the top of the screen so touching the battery icon takes me to power settings, touching the connection icon will let me disconnect data or start the connection manager and touching the volumn will bring up a volumn control. I really dislike having that area just open notifications.
4. Is there some decent, free theme generator out there? I was pretty happy with the one I had on the Omnia 1, but the TP2 seems to be pretty locked down for Touchflo.
I am sure there are more things, but hopefully getting these key things accomplished will remotivate me to try and go and find everything else myself.
Thanks in advance!
Maybe if I am feeling up to it this weekend I will play with my old Samsung and see what use I can make of it. Until I brick it, most likely. I am thinking about learning to create my own ROMS, and seeing if I can create one with no phone functionality at all. Useless? Probably. But something ingteresting to do on these long winter weekends.

1. TF3D2 Tweak. This has this option. (Pretty sure that's the right link, if it isn't then Google is your friend)
2. When your is displayed, mid-left there is XT9 and ABC, make sure that ABC is highlighted.
The others I'm not too sure about. Let me know if this helps.

3. go to HKLM\Services\NotificationManager\ in your registry.
Change the "flags" entry to 4 instead of 0, and it should go back to the default windows mobile notifications (any value other than 0 worked for me to switch back to the old style, but I saw another post that suggested "4").

I would also like to apply that change to unlock the top bar but am getting an "Access Denied" message when I attempt to change it.. Using mobregedit to do it.. what should I do?

Verizon TP2 - Selecting Text Issues

Hey gang,
I'm driving a Verizon TP2 with the standard ROM, TouchFLO 3D 2.1.38420.2 out of the box with WinMo 6.1. I'm still fairly new to WinMo and the TP2 and am having some frustration with selecting text, mainly with trying to select text that extends beyond the visible screen. I can select text that's on the screen easily enough, but when the text I want to select extends either above or below what's visible on the screen, I can't figure out how to get that extra bit of text.
For example, let's say I go into a sent email that has four total paragraphs of text, the first two of which are completely visible on the screen. I need to select and copy the first three paragraphs only. I can easily select the first two visible paragraphs, but I can't figure out how to scroll down and continue getting that third paragraph.
I've tried with my fingers and the stylus, with no luck. Once I have the visible text selected, if I scroll down with the scroll bar to get the text below, once I click on the text it deselects. I've also tried getting the screen to auto-scroll with the stylus as I'm selecting text, by keeping the stylus down at the bottom - much like you would with your mouse pointer in Outlook/Word on your computer - but it won't scroll.
I've read posts about using the shift and arrow keys, but I can't seem to make that work either. Selecting all the text, then copy/pasting that over and deleting the extra works in some situations but not all. I need to be able to select exactly and only the text I need before copy/paste.
Any help would be greatly appreciated. Thanks!!
-Stever

I believe you have to map the shift function to a key and then go from there. Or you could highlight the first part, copy paste, scroll down, highlight the second part, copy paste.
I'm looking for a thread where someone asked a similar question

burtonsnow8 said:
I believe you have to map the shift function to a key and then go from there. Or you could highlight the first part, copy paste, scroll down, highlight the second part, copy paste.
I'm looking for a thread where someone asked a similar question
Click to expand...
Click to collapse
I'm going to give Rhodium Keyboard Controller GSM/CDMA v1.4 a try and see if that helps.
That being said, am I seriously *not* doing something stupid here? Is there really no built-in function to continue scrolling as you're selecting text with WinMo 6.1? I've really been enjoying WinMo 6.1 on my TP2 over my previous Blackberry experiences (including old non-touch and the Storm), but this seems like an amazing oversight.
Anyone know if this is corrected/included in WinMo 6.5?

Are you in TF3D or the standard windows view? In TF3d I cannot highlight any part of the message, I can only scroll. When I opened windows view (click all messages in the txt tab) I was able to touch click (hold down on screen) > "Make Selection" > and then highlight as much text as needed. It works exactly like excel and word mobile. I'm on Mighty Mikes 6.5 sense 2.1 rom.

Stever315 said:
I'm going to give Rhodium Keyboard Controller GSM/CDMA v1.4 a try and see if that helps.
That being said, am I seriously *not* doing something stupid here? Is there really no built-in function to continue scrolling as you're selecting text with WinMo 6.1? I've really been enjoying WinMo 6.1 on my TP2 over my previous Blackberry experiences (including old non-touch and the Storm), but this seems like an amazing oversight.
Anyone know if this is corrected/included in WinMo 6.5?
Click to expand...
Click to collapse
It may very well be a 6.1 vs 6.5 issue...I just confirmed that the problem exists on my T-mobile TP2 as well, stock 6.1 ROM.
I tried everything I could think of, with no luck...except for one thing: if you have the keyboard open when you start to select text, you can use the arrow keys to scroll up/down. Of course, it's not exactly easy to do that and hold the stylus on the screen, but if you're using your fingertips to select text, you might be able to get away with that.