xv6600 usb1.02 error - MDA III, XDA III, PDA2k, 9090 General

Help I have a xv6600 that came up with a radio error and now has the dreded usb1.02 error msg. I would love to get it back and have decent computer experience but little hack experience. Of course when I try to load the original verizon drivers I get the wrong country code error. If anyone could get this running and back online I would be in there debt. I cannot express how important this is to me.

try to flash original rom with maupgradeut_noid.exe

I now have 2 dumb questions.
1. where can I find an original rom? ( I believe the ship packages from verizon are just upgrade versions)
2. how do I properly run that program?

well the point is to find a rom for your device (Harrier, CDMA Blueangel) and then use the tools i PM'd you

it comes back saying congrats on upgrade but shows nothing for old version and nothing for new version and I am still in the bootloader screen

Related

Flashing HTC S620 to WM6

Feel free to beat me to death with my own mouse if this Q was already obviously answered somewhere, but I have searched these forums and failed to find a definitive answer on the matter....
I downloaded the WM6 beta ROM (RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test), and have CID unlocked my device via Gsmliberty.com. My question is...do I need to install the updated bootloader (RUU_Excalibur_SPL-1.11_UpgradeOnly.exe) on my S620, or is this bootloader only necessary for the Dash?
I want to make certain I am doing this right, in fear of bricking my device.
Answers?
if your bootloader is wrong the upgrade will give you an error message and restart your phone
The S620 is running bootloader 1.11.405.4
Just for kicks I ran the bootloader upgrade (which actually downgrades to lower version) and I got a (206)Connection Error.
I'm pretty sure you do need it. Like stated above, if you get an error when you try the upgrade, the answer is YES!!
You'll definitely need it if you try to go back...
-Mc
But how can I install the RUU_Excalibur_SPL-1.11_UpgradeOnly.exe bootloader? When I attempt do so I get the Connection Error. I launch the setup wizard, my Screen gets the rainbow bar with the word USB appearing at the bottom. At that point the installer seems to hang or timeout and I get that blasted connection error. Even the device appears stuck and I have to remove the battery to bring it back to a state of consciousness.
Am i doing something wrong?
you really should read the available info regarding this subject before you attempt to do something like this. if you read the thread about 13 posts down regarding flashing a cosmo you will see how to do the upgrade. it worked for me on my s620. i downloaded the files that the person giving the instructions provided a link to instead of editing my own files.

Unlocking a G3 Universal

Hi. Trying to unlock a Universal. Put into Bootloader mode, connected by USB, ran MaUpgradeUt file and got the following " Error 150. Rom upgrade Utility error. Not designed for device". This is a V1.00 G3 unit.
Any ideas please? I thought this was the easy part of a Rom upgrade!
dougproctor said:
Hi. Trying to unlock a Universal. Put into Bootloader mode, connected by USB, ran MaUpgradeUt file and got the following " Error 150. Rom upgrade Utility error. Not designed for device". This is a V1.00 G3 unit.
Any ideas please? I thought this was the easy part of a Rom upgrade!
Click to expand...
Click to collapse
Please READ the Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Thanks but following the unlocking part of it. Error messages thread does not mention Error 150.
Thanks
Bit more info.
Utility is Device Software Update Utility - R1000 R21200
Says change from Device CE Image version
Device Ext Image version
Device Radio Image version
Change to CE Image version
Ext Image version
Radio Image version
Then I get the message - Error 150. Does not designed for your device
Please get proper Rom Upgrade and try again.
Nothing in the Wiki says about this problem. Any ideas please?
Can someone tell me what is happening please? The Wiki is fine - if it all goes right - but nothing there tells me about this. How can I be using the wrong Rom, we are only unlocking it?
Thanks
Sorry, I don't know how to help you, mine was already unlocked.
I don't understand why in the wiki procedures are referred to Wizard... If there's so much compatibility, you may try Wizard Service Tool to unlock it. It seems to work with G3 devices with 1.00 BL.
May I ask you if you tell us your steps? I have to make the same operation on a friend of mine G3 Uni, so I'll appreciate your help.
Thank you.
Hi. All I tried to run was MaUpgradeUT_noID and that's when I got the message. Tried the Service tool but I am using Windows Vista with Windows Mobile Device Centre and the phone was not recognised. Likes XP and ActiveSynch which I haven't got.
So stuck........
Doug
May I suggest you to find a way to use XP? Maybe creating a little partition and a multi-boot... I don't feel so good thinking of Vista and flashing...
Special thanks
It is nice to know there are people on here who will go the extra mile to help someone in trouble. I was having real problems with trying to unlock and flash a WM6.1 ROM but Olympia768 kindly did it for me and in double quick time.
I have now back a Universal, with WM6.1, that seems like a new machine. I absolutely love it!
Many thanks to a very kind guy.
Doug

Issues with Rom Downgrade?

Ok, So ive been trying like crazy to try to get gps locks with my xv6900, and I figured I would try the guide at
http://wiki.ppchaven.com/index.php?title=Pocket_PC_WIki:FIX_VERIZON_GPS
Well downloading them was quite easy and getting the .40 coke to run was fine, but when I tried running 2.RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133_Ship It gave me an invalid error Id 294. not sure what to do, I tried it a few more times and I kept getting the same errors. Afterwards I basically gave up thinking if it was this much of a pain than I can live without the GPS feature, but I dont know where to go from here. I did download a different rom specially for the xv6900 but from what I have read( and I could be wrong here) I need to install a rom that isnt GPS capable in order to be able to boot back into WM to get this all sorted out. Basically I just need a rom to do that, unless I screwed up more than I hope. So I can get this thing going, Any help would be greatly appreciated.
thank you
EDIT : before i did this, I did install the BELL rom to upgrade to the 3.42.70? radio, perhaps thats why im getting the invalid ID error?
Also I am stuck at the 3 color screen that says
vogo100
SPL-0.36.0000
CPLD-3
http://forum.ppcgeeks.com/showpost.php?p=547614&postcount=16
Just rerun stock rom exe...
Good luck.
I went there and i wasnt exactly sure which one to download, So i downloaded the VzW_Vogue_20273_a1.rar nad prior to extraction it asks for a password...
Please explain in greater detail as to how I can fix the issue, Thave You.
Stock Verizon rom
Awesome, back up and running, Thank You very much.
Why the f do people with vzw vogues insist on upgrading the radio to the bell radio? There is likely to be little or no benefit.
I upgraded my radio to the Bell one at first figuring that vzw screws us over with so much, maybe even the radio would be inferior to other service providers...
but as you said there would be little or no benefit, and truth be told I have less dropped calls and better service in with my vzw radio.
(my house is the worst place for service so testing this was quite easy for me, the vzw radio works 90% of the time, the bell radio wouldn't send text messages often and I would miss phone calls on the regular)

In Desperate Need of Shipped ROM for HTC Touch Diamond

Hi I have recently tried to flash my Touch Diamond ROM, messed the hell out of it and, the only way to fix it is to flash it with the original stock ROM that it came with. Could anyone please help me with this.
HTC Touch Diamond P3700
Rom SPL 1.93
CID HTC_017
The phone was not branded straight from the manufacturer.
The problem is that I tried to flash the phone without doing hard SPL
Cleaned the whole phone and the only thing working now is the connection to the computer Trough mtty. I tried using other ROMS but they stop at 1% and gave me a vendor incorect error or something.
just download it from htc site
I tried but when I select the Serial number it says that the update is not for my phone and doesn't let me download it. and the ones that they have are only updates.
Does anyone have a valid Serial Number that i can use to download update ROM from HTC?
Have you tried any official roms posted around here? like this one: http://forum.xda-developers.com/showthread.php?t=410720
I did that but it started to load the roam into the phone and crashed at 1%,
it gave "Invalid Vendor Id" error and it turns off. Is there like a unversal HTC rom that at very least gets me access to the NANd Memory
I just want to HArd_spl the phone and install a new ROm
Dont even care about the original ROM any more
ekirakosyan said:
I did that but it started to load the roam into the phone and crashed at 1%,
it gave "Invalid Vendor Id" error and it turns off. Is there like a unversal HTC rom that at very least gets me access to the NANd Memory
I just want to HArd_spl the phone and install a new ROm
Dont even care about the original ROM any more
Click to expand...
Click to collapse
Try that one HT828GN27034 and let me know the result.
Oh very nice, thank U very much, I'll try it right now.
All of the Upgrade ROMs just give me invalid Vender ID error message
Doesn't make sense to me though, i tried flashing the Phone With Hard-SPL but for some odd reason it hangs at 0%.
Is my phone dead for good or there might be a way to fix this issue
did u installed OLINEX first?
If ur phone is in 3 color screen try to install Olinex 1.4 and after that flash it with stock ROM.
No thats the thing, I Just Cleaned the phone with Mtty and tried to flash it with WM6.5. but after the cleaning nothing really work out. and i cant even go back to the the old Rom cose I did not back it up.
ekirakosyan said:
No thats the thing, I Just Cleaned the phone with Mtty and tried to flash it with WM6.5. but after the cleaning nothing really work out. and i cant even go back to the the old Rom cose I did not back it up.
Click to expand...
Click to collapse
not even hard reset? did u tried?
yeah man i tried hard reset too, that was no go, I wish there was a way to remove the CID Lock
ekirakosyan said:
yeah man i tried hard reset too, that was no go, I wish there was a way to remove the CID Lock
Click to expand...
Click to collapse
What windows are you using?
I am using windows 7, but i tried the same process on vista and XP, same result, the phone connects to the pc, and right as i try to load one of the ROMs from HTC's website, the thing crashes at 1% and says invalid vendor ID error.
IS there a universal ROM that can be loaded, or my phone is bricked for good?
Perhaps you want to have a look here: http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades
Succes!
Oh wow this place has every ROM type but mine, so not fare, u think if i download and try every one of these other ones I might have some sort of luck?
I used HTC's MTTY and figuered that My CID is HTC__017, and the 1.93 Spl
and mine is not listed there.
Hey, I have the EXACT same problem. My diamond is the US 3G Unbranded phone (DIAM110, CID=HTC__017). I've both called and emailed HTC asking for the ROM, but they say that they do not have it. The only way to get it would be to request it from the vendor you bought it from. I got mine as a gift so I can't really do that. Oh, and if you want them to flash it for you, you have to pay like $160. Not cheap. And you know HTC, they'll make up that your main board's fried, and ask you to pay $300. If you have WARRANTY, send ASAP. Mine expired a week ago.
As for flashing random ROMs, most likely this will not work (although you can try). The way your phone determines if it's allowed to install the ROM is by looking at the beginning of the file. If you open up the NBH with an editor, you can see and even change the ID. The problem is, HTC "signs" the file with a 2048 RSA key (2^2048), and if you even change one digit then the signature will be invalid.
So yes, I have the exact same problem, my thread is at: http://forum.xda-developers.com/showthread.php?t=623320, so if you have any luck, or I do, check out that thread.
At this point, the only things that are left to do are to beg HTC or a vendor for the ROM update (I might find HTC developer's mailing address and ask them); find a way to get into Soft SPL, or in other words load into memory a bootloader that would allow flashing of unsigned code; or find a vulnerability that would allow flashing unsigned code (has been done with Trinity).
Also you can try contacting Olipro, cmonex, and pof, but I so far have had no luck.
Hopefully we'll find something.
~codeslicer
Hey man, thanks for the reply, we are pretty much on the same exact boat, am gonna try to contact HTC see if my warranty is still up, and the phone i got it as a gift, I don't have a recipt of a proof of purchase, what do u think i should tell them. And if that doesn't work, I think I am going to try every single 1.93 ROM
in this site.
http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades
And also what is your CID. if its HTC_017 then its not here, but there are a lot of them in here so u might get some luck.
let me know how it goes man.
I think i have the solution
can u please confirm clearly as what has happened , hope i have the specific solution .

Stuck on boot screen

Ok, I know people are going to say to search. I did for hours....
I used the utility at htc-unlockers to try and free up my radio for us sim card use.
Something went wrong and now I am stuck on the red green blue screen and it says serial at the bottom and usb if im connected to usb.
I saw some other threads mentioning this but I have no idea what to do.
Some of the terms didnt make sense to me.
Can someone please give me a step by step what to do?
ok so it looks like everyone is saying i need to 'flash' a 'rom'
how do i do that, and which rom would you advise for a us cellular touch pro 2 needing to work on att and t mobile.
links would be great
I tried each of these except the verizon
http://forum.xda-developers.com/showthread.php?t=578659
and i got an error 290, couldnt be used on my device
Those are Radio ROMs. You need CDMA roms. Basically there are a couple steps you need to perform first.
I would suggest reading the following thread:
http://www.mobileunderground.info/showthread.php?t=3407&page=1
I did buy the thing from htc-unlock and i think I did it wrong because now I have that boot screen issue.
its a us cellular touch pro 2 win 6.5
can someone link me to the rom I need to get it back running?
ok i fixed it. i can post a walkthrough for idiots.
It would involve links to other sites, so i need an ok from a mod or whatever because i know how pissy these forums can be.

Categories

Resources