My Hermes lags/responds slowly!! HELP PLS!! - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi everyone,
Somehow, my hermes began to lag/respond slowly after i attach a new battery to it. I was hoping and thinking that the battery might not be at fault so I didnt try to switch back to the previous battery.
On how slowly its responding, here's a short clip i took. When i initiate 'Oxios Closeapps', the beep sounded as usual, with my header changed to the word 'Oxios Closeapps' as it should, but the program is not showing up until after some time.
Same goes with other applications, such as file explorer. The word file explorer will show up on top of the screen but the file explorer cannot be seen until some time later. Even my calls are affected. Whenever I receive a call, the signal icon on my top right will signify that there is a call, but my phone will not ring nor vibrate until some time later when it starts its ringtone and vibrate. Even then, when I press the answer button, again, I will have to wait for some time again before I can actually answer them. The line usually would have been disconnected after so long.
Please help! thanks
here's the link to the video:
http://www.youtube.com/watch?v=24y3lYV9PtY
or you can download it from the attachment below

abubakar said:
Please help! thanks
here's the link to the video:
http://www.youtube.com/watch?v=24y3lYV9PtY
or you can download it from the attachment below
Click to expand...
Click to collapse
From your sig you're using V20, try upgrading to V23. Best work to date yet, and see what happens. Also, saw you with windows live messenger etc, that's a hog, try palringo. So much lighter.

Thanks alot. I'll flash the rom right away!

Yup I flashed a new rom and it seems fine now. Hopefully it stays this way cause I've been using V20 for a couple of months now and it worked wonders, until a few days back when the problems occured.
Thanks again

Related

Phone dial, ending call, etc.. problems.. Am I the only one?

Hi forum!
Before anything, thanks for your invaluable help and support, without it I would feel even more lonly on my PPC life
OK, said so...
I'm having currently some problems with the phone part of this great device. Sometimes when I answer a call (with the hardware key) it takes 2 to 3 seconds before I can hear anything from the person calling me. The same happens when I hang. It takes time to hang the conversation, so I never know if it's really hanged..
Lately I'm having also problems with the "today" app I think. It never shows up and the upper bar (status?) does not change when I receive a call.
I went trhu a hard resseting and restore (Sprite) process 1 week ago, but I had the phone problems before that...
Thanks a lot for your help.
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
thanks for your answer! But I'm currently using wm2003. Though I'm considering switching to wm5 now we can if I don't get a solution to this
I normally use the phone for work-job and this minor things annoys me big deal!
joey jojo said:
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
Click to expand...
Click to collapse
heelp
PLease, someone help!

anoying :chirp sound:

hello after installing wm 6.1 [kavana] on my 620 bt anywere phone i now get a really anoying beep or chirp at random times ,during the night or day ,but especialy just after using the phone please help as its doing my head in many thanks
westentertainer said:
hello after installing wm 6.1 [kavana] on my 620 bt anywere phone i now get a really anoying beep or chirp at random times ,during the night or day ,but especialy just after using the phone please help as its doing my head in many thanks
Click to expand...
Click to collapse
Your not the only one..
First you need to check your setting and make sure you have Unread Message Alert turned off...
If that does not work....Good luck
mine does it if it loses signal
I had that problem when I was running on WM 5 when I first got my Dash but not since then. Lol. Wow my post was pretty useless.
so thats it ? no cure, thanks anyway
I know it's late, but for anyone else experiencing this I believe I found the fix from a forum.
you replace the Default.wav file in /Windows with a silent wav file.
I copied it to my computer, had to uncheck the read-only setting then opened in soundrecorder. it sure enough is that horrible beep. play it then select "delete before current position" Save it and replace.
haven't heard a beep yet
disable wifi, it does it after every call and when a new scan detects a wifi signal

White Screen

This just started to happen today....every time my screen timeouts...it goes completely blank...i can still hear things and receive calls...but it will stay white for like 20 seconds and then come back on... i am using Ricky's Wm6.1 any help would be great...thanks
zdub27 said:
This just started to happen today....every time my screen timeouts...it goes completely blank...i can still hear things and receive calls...but it will stay white for like 20 seconds and then come back on... i am using Ricky's Wm6.1 any help would be great...thanks
Click to expand...
Click to collapse
Hard-reset if this doesn`t solve it re-flash...
stylez said:
Hard-reset if this doesn`t solve it re-flash...
Click to expand...
Click to collapse
Interesting.... I just started having this problem as well. I went hard reset... not solved. I re-flashed (using proper procedure)... and it was solved for a couple of days... and then returned.
I then used the forum search function, crazy how that works and found this thread.
Hope that helps.
Are you using maniac's AutoKeylock ?
I have experienced this issue ever since loading Rose ROMs - didn't happen on earlier ones.
However, this last time I flashed to the latest update, I did not install AutoKeylock immediately after flashing. I left this off as I had noticed that the screen was going white 30 seconds into calls (which was the timeout I had configured in AutoKeylock) and I wondered if there was a correlation.
Can anyone else who has seen the issue comment on whether they use AutoKeylock or not. It is possible there is some change in the ROM that AutoKeylock does not handle well.
Thanks.
LiverpoolFCfan said:
I have experienced this issue ever since loading Rose ROMs - didn't happen on earlier ones.
However, this last time I flashed to the latest update, I did not install AutoKeylock immediately after flashing. I left this off as I had noticed that the screen was going white 30 seconds into calls (which was the timeout I had configured in AutoKeylock) and I wondered if there was a correlation.
Can anyone else who has seen the issue comment on whether they use AutoKeylock or not. It is possible there is some change in the ROM that AutoKeylock does not handle well.
Thanks.
Click to expand...
Click to collapse
I think that the WSOA (white screen of annoyance) is tied to the low-light function and joggr bar. Go to joggr settings, and be sure that the checkbox with the lowlight function is disabled.
I had the white screen issue for a few days, tried everything.....as soon as I uninstalled GlyphCache 65535 found here, the problem went away
Capper5016 said:
I had the white screen issue for a few days, tried everything.....as soon as I uninstalled GlyphCache 65535 found here, the problem went away
Click to expand...
Click to collapse
it comes and goes its just something messed up that happenes probably nothing to worry about, just little anoying is all.
Check power management registry settings
Hi,
I had this problem once and fixed it by changing the registry settings that control what happens when the device enters various power states. Search the forum about this as the answer is in there somewhere Hope this helps.

**Possibly Solved** No SMS, MMS Notification During Standby/Sleep

I think I may have stumbled onto a solution to our dreaded quiet phone that doesnt notify us of a SMS or MMS and possibly email when the phone goes to sleep or standby. I have searched asked inquired, and beat every search engine and found absolutely nothing. So being frustrated of seeing msgs pop up when I hit the power button to wake the phone up I went hunting and I think I found it. I tested this all of today and so far I havent missed one yet, and normally I miss at least 3 a day. Its still in a testing phase so I DONT guarantee this works, but with some feedback with others, it might be the solution. I did alot of comparing with my other phones and my 8125 and 8525 had a different value so i changed it to that value.
I have made it a cab file so that anyone who wants to try it can uninstall it if it doesnt work, I suggest a soft reset after making this change. This changes the following location:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:00000001
to
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:00000000
Good Luck! And if it works or doesnt, please leave feedback of either thanx or didnt work, like I said so far its working on my att tilt 2 stock eu rom 1.86
Nice one, but its already been solved here.
crachel said:
Nice one, but its already been solved here.
Click to expand...
Click to collapse
Well at least its here, I know there is a ton of posts going around in here about this problem, and I did munerous searches, but obviously if you dont get the right keyword you'll never find the post.
so what does this do? light the screen up everytime there is a message? or basically just solve the problem of message not ringing in sleep mode?
Basically it does the same thing it did with the 8125 and the 8525 when a msg comes in the screen wakes up from sleep, so far (I thought) I might have found a solution, but it seems I was beaten to it.
So far there isnt a solution found yet of the alert coming thru without lighting the screen up as far as I know.
yea, i thought it lights up the screen when msg comes. I have a habit of putting the phone to sleep without locking it, so it might cause problem when i put it in my pocket as i receive message more than calls.
Thanks anyway mate
mr_sheen said:
yea, i thought it lights up the screen when msg comes. I have a habit of putting the phone to sleep without locking it, so it might cause problem when i put it in my pocket as i receive message more than calls.
Thanks anyway mate
Click to expand...
Click to collapse
Yeah but if you have the end key setup as a long hold it will lock the screen to prevent that accidential tapping of the screen. Unless you have a modded rom then you would have to see what key it is. But hey for me its better then missing a msg.
Hi AngelDeath,
Just wanted to say thx for this one -I realise this thread is old, but it's sorted my no sms alert issue on my HD2. It had been driving me nuts for ages!

[Q] Phone mutes during calls

After I updated to stock Froyo, my phone started muting during calls. No face pressing of buttons, and the mute button wasn't on. It just muted itself, and the only way for me to fix it was to turn speakerphone on and off. I thought rooting the phone and putting a custom ROM (Syndicate Frozen) on the phone might help, so I did just that. The problem is still on-going.
Does anyone else have this problem? Is there any solution? My Epic is my main phone and it's done this on a few very important phone calls a few times already. Before I take it into Sprint I just was curious if there's a simple, less having-to-deal-with-face-to-face-tech-support kind of way.
Thank you. I apologize if this has been answered already.
Is the phone muting your voice so that the caller can't hear you, but you can still hear the caller?
I had the exact same thing happen with my Epic and I ended up having Sprint exchange it for another phone.
Out of curiosity, what happens if you turn on speakerphone?
Ahh, yes that's exactly what happens. They can't hear me, but I hear them perfectly fine. Usually what I hear is, "Are you there? Hey, are you there?" a few times before I realized what happened, and no matter how many times I tell my mom to just stay on the line and I'll fix the problem in two seconds after it dawns on me what happened, she always hangs up in a huff.
When I turn on speakerphone they can hear me right away, then I just turn it back off and everything is fine the rest of the call. It doesn't even happen every call, which is the best part. I'll be in the middle of a 10 minute conversation and it will mute itself, then the next phone call will last 45 minutes with no problems.
Does the mute icon show it's on? Did you try backing up and simply switching roms? If there's too much trouble, odin ec05 and take it in to repair if the problem still exists.
Joel
When using odin
joells1 said:
Does the mute icon show it's on? Did you try backing up and simply switching roms? If there's too much trouble, odin ec05 and take it in to repair if the problem still exists.
Joel
Click to expand...
Click to collapse
BTW, when using ODIN start from having the phone off and connected to the computer. hit the power and number 1...
Use the instructions on the odin page
TAKE OUT THE BATTERY BEFORE STARTING
mine always got stuck unless i took the battery out.
Joel
Thank you for the tips, ya'll. I'm going to first update the ROM I'm using now (as there is an update out). If that doesn't help it's off to Sprint I go.
Thanks again.
Adorialea said:
Thank you for the tips, ya'll. I'm going to first update the ROM I'm using now (as there is an update out). If that doesn't help it's off to Sprint I go.
Thanks again.
Click to expand...
Click to collapse
when you go make sure its a corporate store they have the techs and tell them you already called customer service (dont bother calling them there gonna tell you to factory reset...........every time i have called i can hear that that most if not all are reading from a scrip) then the tech will try to get out of helping you by saying its the towers (bull sh$%) that the most popular answer you will get........ And for the bad news the phone that u will get is a referb
did you try to updat the PRL and profile?
AND FOR GOD SAKES if your rooted got back to stock 2.2 EC05
My phone did the same thing after the upgrade. It is random though. The phone mutes during calls randomly but mute button doesn't light and my face hasn't hit it. I've been trying to find out how to correct the problem, but my Epic was working fine until the upgrade.

Categories

Resources