Hello! I'm new to this subforum.
We at the Polaris forum need some files from an up-to-date Diamond ROM. They are:
ahi2dati_dm.dll
ahi2dati.dll
We're making tests to unblock the hidden capabilities of the MSM7200 chip in our devices. For now, our "crew" is working hard to find the right files and comparing the results.
Could you be so nice to send those two files to this thread? It's located here: http://forum.xda-developers.com/showthread.php?p=2665924&posted=1#post2665924
For your convenience, you can send me a mail to jmn ..(at).. superjmn.com, without "..(at).. " instead.
Thanks!!!
Related
i don’t see why we shouldn’t open a section for the 4100 here. A lot of the developments that goes on here also work on the 4100.
I have done some research on it and so far I found out that the ppc4100 use 2 file to flash the rom one is the boot and the other is the WM image just like the others do. Now both of those files are nb0 format and can be extracted with dumprom.exe which is available here. It can flashed back on the ppc4100 using a flash card to hold the image and triggering it by booting with the bootstrap.
Wish list
to edit the image file ( to change certain files)
to compile the extracted files from the rom ( to customize the rom with new programs or to custom update to a newer operating system )
what does anyone think?
u can change the press icon on the 4100 its located in a file called bobo.exe in the windows folder.
see? its almost the same there is very little change i think we need to sit down for a little while and think about how good this will do.
it will bring in more readers that would like to read about the 4100 thus u will generate more traffic that also will generate more donations
so pls i dont know how to get the athoraty's attentions here at least concider it
or comment
thanks
I am very intersted in the 4100 development as well.. I was hoping someone in here or maybe a few would be interested in sharing some knowledge and possible experience. I have done a lot of research and played around quite a bit with this over the last week using various XDA tools as well as hex editor, ect. If anyone would be interested in helping please post us here.
hey jr97ai. might as well start posting here maybe we will catch someone's attention and they will declare the ppc4100 a worthy of this site
---------------
the original rom files for the 4100 are the currunt morst recent update from at& however, both files are *.bn0 extention. as follows.
SP_E0402_230A.nb0
SP_K1112_230A.nb0
i recieved those files from audiovox a little while ago. jr97ai and myself have been working on this and have extracted the files out of the romfiles with the use of dumprom.exe. (great app by the way). i think jr97ai knows alot more about this than i do and can explain a little better.
i will attach the bootstrap rom file along with a letter that came with the cd that was sent from audiovox. i can attach the rom file as soon as i free up my bandwith
I have been playing around with mkrom and have been experiencing some problems. as it says on mkrom its not the most user friendly program. no its not, not at all, not even close. but i still try anyways lost but still trying.
if anyone can somehow point us to a direction it coul dbe verry helpful.
there might be a possibility tto use the exsisting xda WMse existing rom to use on the 4100. they seem to be similar. they do use the same operating windows after all.
well i tryed to post the rom file many times it didnt work. its uploaded in the ftp if someone can post it.
every time i try to post it shows this err.
Upload Error: Could not upload Attachment to ./files/sp_k1112_230a.rar
question to anyone who can answer.
to change the operating system from win2003 to 2003se wouldi need to change the bootstrap as well?
i am thinking i could use a nb1 and rename it to nb0 it should be the same.
if you would like to see a new section appear for the audiovox 4100 please post saying so. maybe that will gets omeone's attention.
we got 60 views and only 2 ppl have posted.
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
im working with audiovox ppc4100 , and if u wanna dump with rom for make permenent rill file and dont losse it when u make a hard reset ,,i think the best solution its when u replace rill u can make a completat backup in a sd card then when u have to make a hard reset u can restore your backup and all will work ok...by the way i have working well mms, photo contacts , npencil , ms money , etc.
not jsut the rilgsm
now that we are able to flash the rom to the ppc4100 i am thinking we could change the operationg system. i am running towards the wm2003 se . i am trying to look for a basic rom nb1 format so i can try to flash it.
i am thinkiing it will work but i am worried about the phone part of the ppc.
do u have any thoughts on this?
No ppc4100 folder, any help please!!!
faramisimo said:
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
Click to expand...
Click to collapse
Report about wrong user name and password
I need to reflash my PPC4100. Looking for rom and can`t find it. May be somebody have a original ROM from AT&T, or custom ROM, or WM5 ROM?
Hi - I have both a Universal and a Wizard. For a while now, on my Wizard I've been using a ROM made up of 'best bits' of all the available releases, with all carrier customisations removed - this is released under the name 'Mr. Clean' rom. It's bugless and lightweight. Perfect!
Does anyone release a similar rom for the Universal? Or does anyone prepare one for their own use who might consider sharing? It really would be great to see.
This would be cool
We should do this.
A "Clean" ROM with a CAB set to choose from for each provider.
I would appreciate this greatly - since t-mobile remove some stuff from the blank setup.
Rich
A fast, lean and mean ROM would be awesome. I don't have the time or skills unfortunately.
There is one already. It was made by Jwright. Just don't install the Ext ROM if you really want it to be super clean. Here it is: http://forum.xda-developers.com/viewtopic.php?t=55019&sid=7789d445c5b87ea11980c475ab58e2c9
I followed that thread - but the links dont exist.
Could someone upload the T-mobile version of Jwright's ROM to the XDA-Developers FTP site??
If not - email it to me, PM me for my address. I'll host it on my website if someone sends it.
I just tried the thread I posted above and the link works fine. It must be your computer settings.
I am not sure which version is this though. I think he released QTEK, IMATE, and TMOBILE versions. Just use the Ma_Upgrade_No_ID_Tool.
The links to the other topics work OK but the ROM links given in http://forum.xda-developers.com/viewtopic.php?t=55019&sid=7789d445c5b87ea11980c475ab58e2c9
don't?? There is no such directory on the ftp site????
Exactly - The posts link OK, but the FTP site doesnt contain the ROMS
The link I posted above is the link to the topic with the files you guys are looking for. It should be on the first post of that link, and it works fine on mine.
Yes it does but we're talking about the links to Jwrightmcps modified ROM's... These are missing from the FTP site????
I am now confused. This has been discussed before, someone took off those files from the fttp. Probably someone does not want to share or maybe it took a great chunk of memory storage. That is why "Xanadu" provided us with this alternate download site, but it is the same file, so it does not really matter if we can't find the original posted file by Jwright because someone was gracious enough to share.
I thought the topic was where is Jwright's Modified ROM? I provided a link on where to donload it. Question answered. What is still the confusion? Are you looking for a specific file for a specific device like Jwright promised? If so, he also left instructions on how to use the Ma_Upgrade_No ID file. So just extract the files necessary and rename them, then install.
Hello all I am new to this forum but I hope I can find the answers to my problems here. First off I have looked all over the site for NFO to a solution, but I only found bits and pieces, or information that was a little over my head.
This is my problem: I have a an HTC 6800 through US Cellular, I want to upgrade Windows Mobile to the most current version (6.1) I believe, but HTC does not have the upgrade for the USCC version of this phone on their site, and USCC will give me no tangible information either. Plus I would like to enable the GPS. Are there any step by step, easy to follow articles on doing both of these upgrades? Remember I am new to this so the easier to follow the better. Thank you all for any assistance on this and for providing this wonderful forum.
The Titan section of the forums will be where you want to go.
I used this guide (http://forum.ppcgeeks.com/showthread.php?t=24511) to upgrade mine.
Beginners guide for the Titan - http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
The XDA Titan wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Some other useful info I've compiled: http://sites.google.com/site/victorbush/htc-6800-1
Hope this points you in the right direction!
The directions say to use Titan_No2Chem_5060_WM6.1. Where do I get this and how do I use it in BuildOS?
Actually using the builds that came with BuildOS (like WM6.1 20931) worked for me.
If you're interested ftp://up.ppcgeeks.com/Titan/Users/No2Chem/ has No2Chem's stuff. The kitchen RARs are in the Basekit folder. You'll put that in the BuildOS\Kitchens folder. You'll also want to extract the selections text file from the basekit rar and put it in the projects folder. You may have to tinker with the selections file a bit to get it working properly.
Here's the first 7 lines of the no2chem selections file i used for 5060 (i didn't try any others):
SelectionsVersion=.90.04
KitchenDir=Kitchens\basekit 5060.rar:
ModuleDir=Kitchens\PPCkitchen_OEM.rar:
ModuleDir=Kitchens\PPCkitchen_OEM_VGA.rar:
ModuleDir=Kitchens\PPCkitchen_Addition.rar:
ModuleDir=Kitchens\Generic_OEM.rar:
ModuleDir=USER_OEM
Click to expand...
Click to collapse
Again I thank you vicbush. When I installed BuildOS and then patched it, the first time I opened it it gave me no options in the new project screen, after I updated it again then it gave me some options but none of the ones you have shown me. So I am reinstalling BuildOS and I will let you know if that helps.
Vicbush, I thank you. With all your help and your tutorials on changing carrier name and getting data back up, I am now the proud owner of a USCC HTC 6800 running WM6.1. Again thank you so very much.
SuperJustKitchen v0.7 Released.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices.
For more information on the kitchen, please read: http://forum.xda-developers.com/showthread.php?p=4288668
Word of warning:
None of the new EXT's have been tested and fixed for the Herald, Opal, Hermes AND Artemis. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.)
(I'm no longer updating each thread separately for each device but just updating my site and posting the release info here.)
howdy,
i just gave it a shot, downloaded all files and wanted to look into it but it seems i have to look somewhat deeper to just set the kitchen up...it doesnt work following your walkthrough guide...
so for now the impression left behind is:
nice homepage
frustrating setup..for a time pressed person
greetz
Sorry, that's because the setup has changed a lot since I first started the kitchen for the Herald.
It's pretty simple.
Create a folder in your C drive and name it Kitchens.
Within that folder create a folder called SuperJustKitchen.
Dump the contents of the the main files into this.
Go into the Working_Directory and dump the contents of the other 7z files.
I'll probably be making an auto install pretty soon.
The company I work for uses a horrible old product called Cognito.
We are developing an Android App to replace this but in the meanwhile we have a problem - within our budget we can only run this on Rhodium devices and with specific ROMS.
We have trouble getting decent Rhodiums and finding ones with the correct ROM is even harder. I now have a box of them with the wrong ROMs.
I have searched around for the specific ROMs we need but it seems that mos of the download links I can find have gone.
Even when I can find a ROM that seems to be OK, there always seem to be other issues.
I think the following ROMs should work (in theory):
- 1.86.401.4 (67102) WWE
- 1.14.161.6 (50207) WWE
I figure the next step would be to dump a working ROM and write that back to the other devices.
Can anyone tell me in simple steps how I can achieve this? I have started looking into ROM kitchens but it has far more detail than I think I need and I feel a bit swamped with it all.
Thanks
Update
I have managed to get the RAW files from a working device using this thread:
http://forum.xda-developers.com/showthread.php?t=501871
However, I cannot find any tools to put these back together. All the links seem to be dead
I know this is an old thread, but did you ever figure out how to dump the a rom from a working phone and restore it again?
I have a TP2 Rhodium 100 set up with WM6.5 just like it should be(with all the tweaks and apps), and I'm going to give it to family - But I don't really like to have to set it up again all over, so a way to make a rom dump and restore it would be really nice
Its now 2015 - there must be something (I have searched and all threads and post seem to be either dead or the links don't work or the programs are not available anymore).
JBJ