Related
Hi all after upgrading to win 2k5 my device worked for 6 hr and while installing software it hanged resting didnt open it i cant get it to connect to activ sync is there a way to get windows agine on this device please advice
regards
Do a hard reset, it will solve your problems
nothing works no hard reset nothing is working it stand on the colored window nothig else i cant even get the boot lodar screen only the 4 colores screen and the blue tooth led working and the phone is working but no rings isnt there a way i can flash with sd card like in wallaby please help me
try doing a soft reset "power+reset" then right afterwards press "record+camera".. use the record and camera to set the bottom two options to yes and press your mail button.. maybe this will get it going again.. if not do the normal 05 bootloader "power+record+camera+reset" and dock it and hopefully you will see the USB and can reflash it again or back to 2k3
THx a lot Black6spdZ it's working now :lol:
what fixed it?
i just did as you told me (try doing a soft reset "power+reset" then right afterwards press "record+camera".. use the record and camera to set the bottom two options to yes and press your mail button.. ) then the windows opend correctly and i could get it connected to active sync i instaled another ver. of windows TuMa_v1.4 but the camera didnt work i'm looking now for a way to make it work if u can help me
PS i recive this message each time i rest the device (the file camera_Detect cannot be opend. either its not sined ....)
are you flashing an ext rom with the main rom? If not it may be trying to load the old 2k3 ext rom programs on top of your newly installed 05 main rom. if that is your only problem look with the files that came with the 05 zip, I believe there is a compatible Camera app included with it that you can load and should hopefully overwrite the older version. You can keep that message from appearing by going into your Windows/Startup folder and deleting the camera detect startup program until you get the new camera app loaded. What I did was use the ext rom tools to unlock and then format the ext rom so that there were no programs on it. From then on I only flash the main rom when needed and load just the programs that I need to keep it nice and fast. Hope this info gets you going.
yah this is a good information now it's working fine thx a lot :lol: i found the application on the ext rom htc one and everything is gr8
I’m happy to share with you the Arabic support files for the HTC S620 device. Unzip the attached files and install the two cab files, that’s it.
Good Luck.
Thanks anaq8i
Arabic programs
Hi,
Here is useful Arabic programs cab.
Take care
it didnt work , can u illsturate more please..
Arabic Files for HTC S620
Hi,
Here is the full list with instruction file. You need to follow installation instruction and feedback.
Thanks
does it work with wm5? does the phone need to be unlocked? i can see the arabic letters but they are backwards. the arabic software says" cannot run on your device". i have t-mobile dash (htcS620 ) and windows mobile 5.
How can I put other languages?
Thanks
Yeshai
i tried doing installing both methods several times, its never worked for me. every time i install it and restart the phone, it never boots to the home screen, it just reboots over and over.
i have the t-mobile dash with windows mobile 6
any suggestions?
The arabizer software does work with WM5.
does the phone need to be unlocked? anaq8i?
ill reinstall windows mobile 5 on the dash and try installing it again, but it sucks that i cant get it to work with windows mobile 6, but then again, i more or less just wanna see some arabic script on a smartphone for once! anyway i think i found another method to be able to display arabic text on windows mobile 6, but i wont have time to test it out til later
callmerani, did it work for windows mobile 5? and which files did u install? thx also both arabizers install sucessfuly but the software says cannot run and the arabic letters are read backwards and they are disconnected. i tried these on wm6 but it just crashed my phone so i know that i can make it work on wm5. when i install the arabizer suite it says (translated from arabic backwards) this program is made for a previous version than windows mobile 5
i installed it now on a t-mobile dash windows mobile 5. arabic text finally showed up, but often it was backwards and the letters were not connected. most of the programs that came with it also didnt work, and i couldnt send txt msgs nor type in arabic. also, none of the secondary symbols worked while typing, like the one's u normally access by pressing alt. also, looking through the software, it is obvious it was meant for a pocket pc, not a smartphone.
My phone is an HTC s620, not branded to any carrier and no unlocking to do.
callmarani....here same problem ..is there a way i can format it of fix it ?
I am stuck too with this stupid SW! I need to get the hell out of this ARABIC DEAL!!! it missed up my phone
callmerani it seems that me and you have the same problem. we see the letters backwards and disonnected.
has anyone tried this?
http://www.pocketgear.com/software_detail.asp?id=20118
it is made for windows mobile 5 but the demo wouldnt install on my phone for some reason
all of u guys have problems. so does anyone read arabic?? or u guys are just testing and searching . coz this matter is getting me nuts !! either it reads arabic or i go back to my N80 nokia .
HTC S621
none of the programs listed here worked with mine. After unzipping and installation, the phone displays Arabic letters backwords and detached. My HTC S621 is running WM 5.0.
Thought of sharing this.
thank you
i guess we just have to wait until a compatible software is released
Hello,
I've read so many posts about this nice little plug-in, and found a couple that seem to have the exact same issues as me but no solutions/aswers has been posted. I'm hoping someone in here can shed some light onto my ignorant mind.
I have an HTC branded TyTN (Model name HERM200). I have flashed it with the official HTC Swedish WM6 upgrade ROM. Now I've found this nice HTC HomePlugin that I wanted to use. I've tried many different versions but I have the same problems with all of them.
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Chrisofsweden said:
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Click to expand...
Click to collapse
Hi !
Same here with the "HTC Home Plugin v2.1 (patched by N2A)" found at http://www.pocketemu.com/download8.html on a Touch Dual, with French OEM ROM !
1. Cant' add a working shortcut into the Contacts tab : the name appears but when I tap on it, nothing appens
2. Showing a "Folder" icon into the "Sound Profile" tab
3. Showing a "Folder" icon when adding a HTC App only into the "App" Tab : ie. "rotate" or "backlight" adjustment app
4. The weather is working.
The language is French, on a French ROM, but in HTC Home Customizer 1.0, the selected language is "US English". When I switch to French, the language in HTC Home is English...
Any ideas ???
Thx
Try this here. Should be what your looking for.
I've tried this one already:
"Update 17 November 2007 New Version 2.1.1005.722
1. Install on HTCHome Dir and With Brghtnes Fix for Hermes
http://rapidshare.com/files/70343559....schen.cab.zip"
Does not work. What I don't understand is where to get these...
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
...and if this is meaning it only works on an English language WM6:
- This is 0409 English version.
HELP!
I've tried this one already:
"Update 17 November 2007 New Version 2.1.1005.722
1. Install on HTCHome Dir and With Brghtnes Fix for Hermes
http://rapidshare.com/files/70343559....schen.cab.zip"
Does not work. I've tried following:
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
Installing these does not help either
On another note, does this mean it only works on an English language WM6?
- This is 0409 English version.
HELP!
Nah, should work on other languages as if you read through previous link I give ya, it worked on a spanish rom.
Does not work. I've tried following:
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
Installing these does not help either
Click to expand...
Click to collapse
I'll see what I can dig up
Thanks alot!
It doesn't seem like its the certs that stop it from working since
it loads up correctly. It's just the stuff mentioned in the first post that does not work... launcher, quickdial, musicplayer and weather.
Does it require WM6.1?
Did u manage to dig up anything? I'd really like to have it working.
If you are running a swedish rom you need to chenage some things in registry, or find the hhcv08.cab to customise the plugin, if I remember correctly you can change settings for language.
I also recall posting n the subject some time ago, do a search on my previous posts.
try this... I run it smoothly.
Chrisofsweden said:
Hello,
I've read so many posts about this nice little plug-in, and found a couple that seem to have the exact same issues as me but no solutions/aswers has been posted. I'm hoping someone in here can shed some light onto my ignorant mind.
I have an HTC branded TyTN (Model name HERM200). I have flashed it with the official HTC Swedish WM6 upgrade ROM. Now I've found this nice HTC HomePlugin that I wanted to use. I've tried many different versions but I have the same problems with all of them.
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Click to expand...
Click to collapse
Try this [size=+2]cab[/size],
1. install,
2, wait for 10 seconds,
3. go to to day setting, uncheck the Home plug-in,
4. ok,
5. go to today setting again,
6. re-tick the home,
7. ok, ok, then you will see the 5 tap home.
8. want all 6 taps?
9. go to today setting, home tap, tick the music tap,
10. ok, ok then wait some seconds.
11. DONE ! ^_^
dioxda2 said:
Try this [size=+2]cab[/size],
1. install,
2, wait for 10 seconds,
3. go to to day setting, uncheck the Home plug-in,
4. ok,
5. go to today setting again,
6. re-tick the home,
7. ok, ok, then you will see the 5 tap home.
8. want all 6 taps?
9. go to today setting, home tap, tick the music tap,
10. ok, ok then wait some seconds.
11. DONE ! ^_^
Click to expand...
Click to collapse
This did not work. If I check any tab other than Home, the plug-in doesn't show anything at all. Thanks anyway...
Just to follow up. I finally got it working. What did it was that I installed HTC Home Customizer and in the settings in there on the Options tab I selected Plug In Language Swedish and now everything works like a charm!!
hi
I need your help desperately.
I flashed Stu's vista rom and then I installed Emu's Htc home .cab (version 2.1)
After that my phone loads the startup screens and it seems to freeze in the windows screen. I can see the soft keys, the start button....but when I click on that nothing happens.
I try to connect it with my pc but there isn't any partnership established. Also I did many soft resets and pulled out the battery.
Can you help me please?
spinyian said:
I need your help desperately.
I flashed Stu's vista rom and then I installed Emu's Htc home .cab (version 2.1)
After that my phone loads the startup screens and it seems to freeze in the windows screen. I can see the soft keys, the start button....but when I click on that nothing happens.
I try to connect it with my pc but there isn't any partnership established. Also I did many soft resets and pulled out the battery.
Can you help me please?
Click to expand...
Click to collapse
I'm not really an expert spinyian, but have you tried installing the certs?
Search these forums for SdkCerts.cab and Cert_SPCS.cab. As I understand it these allow some unsigned applications to run properly and may be required by some ROMS and devices.
English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!
Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...
MMS works in this rom?
MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark
i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.
helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!
problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!
oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.
Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.
i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?
Miphon m88
Danke es funktioniert supper !!
i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[
hi i am a newbie, please bear with me as i dont know where to post this thread.
i recently loaded duttys bsb6.5 rom. i have following questions.
1) this rom has a different interface such as pics, music, text, email clock etc are written on home screen, its not manila. is it called titanium?
2) i loaded rom but after few hours, the system hangs and reinstalls the rom itself, i have tried the direct flashing from internal storage as well as from RUU inclued.
3) i read about mtty, but dont know how to use it, mtty opens up with a notepad like thing, i am completely lost
4) please suggest a best rom for diamond similar to dutty's with text interface, please suggest why my phone hangs after duttys and what shud i do to avoid it.
5) i like rom which is minimal, text interface, complete with softwares such as change screen, c home editor etc
i do not want the icons on the bottom ( softkeys written in clutter), i want just text,no bars etc
everything as this picture is fine but i dont want the lock , start, at the bottom, neither the softkeys in clutter, simple text softkeys are fine.
if anyone knows a light, titanium, like bsb6.5 duttys rom, please suggest or help me to resolve the hangs and freezes on bsb6.5
windows mobile revolution is slow, i dont want that.
pic link
http://forum.xda-developers.com/showthread.php?t=563245
sorry forgot to post the pic, i dont like this clutter at botton of windows revolution rom.
please help
i already have this rom
http://forum.xda-developers.com/showthread.php?t=506533
Hi, your problems you are having are simple. They are dealt with very easily! The MTTY basically formats your phone to get rid of any "left over bits" of the old rom. There is a thread where someone has explained in detail how to use it, if I were to explain here, I would simply be copying his thread so please read it! The thread is titled "the difinitive mtty thread".
Regarding the rom you have chosen, you are just not used to the new layout. I'm not a fan of titanium either. The original style interface is called manilla, which I prefer. People are trying to move away from it because it is RAM hungry. I recommend using energy rom. I recommend this because he has a manilla (or touch flo 3d) version, AND his rom is pre loaded with fun applications for you to try out! Here is the link: http://forum.xda-developers.com/showthread.php?t=517300
Good luck, dont panic! It's not as difficult as it seems!
cant get hard spl to work
i tried everything, jumpspl.
hardspl kaiser dont work on my rom
in the definite mtty thread they say download hardspl ver 7 which i cant find anywhere. plz help
To do an MTTY you dont need any SPL. You need hardSPL to flash a custom ROM... Have you done a HardSPL ?
To do an MTTY basically all you need to do is charge your phone, then bring it into bootloader (press reset button under the stylus and press volume down until the 3 colour screen is shown).
next step is to connect the phone to the pc with the usb cable. the phone should say USB instead of serial. if it doesnt then your pc doesnt have the correct drivers. (drivers found here http://forum.xda-developers.com/showthread.php?t=540290)
once your phone says USB, then load the exe file mtty1.42.exe (also found here http://forum.xda-developers.com/showthread.php?t=540290) and select USB in the drop down list and press ok.
a white text box will appear, type task 29 and press enter. once it's finished, use CustomRUU.exe to flash your new rom. job done.
Now, where are you getting stuck? I think the MTTY guide is pretty noob friendly! I've attached a custom RUU to save you looking...
Hey, I found this on the main page http://forum.xda-developers.com/showthread.php?t=416211
It's a complete upgrading guide. may be read that before doing anything to your diamond! You dont want to break it for good!
cant load the energy rom either
it is stuck on 0% and not loading
kmengi said:
it is stuck on 0% and not loading
Click to expand...
Click to collapse
Did you try the MTTY as dieselboy posted above?
errors i get
errors i got
kmengi said:
errors i got
Click to expand...
Click to collapse
Do you make use of MTTY ver 1.42? It seems the MTTY that you use is Test version.
For MTTY complete instruction go to:
http://forum.xda-developers.com/showthread.php?t=540290