Develop Bugs

rom dumping

I tried dumping the Dash rom, but can't get this way to work (in the thread about the carousel someone said this would work) http://discussion.treocentral.com/showthread.php?p=1203197
well, I can't get it to work cause I can't get cmd.exe to change from c:\users\username to c:\ I even tried moving the files to c:\users\username but still doesn't work. I'm using vista so I don't know if this has anything to do with it. I used to use cdm.exe no problem in XP. Instead of fiddling with this though, has anyone dumped it before? Cause then I can maybe jsut get the files I want?

type cd .. to go up a dir

By the way the dash rom is available to download. You only need to dump when its a new device which hasn't had a ROM update released.
Go here and go in the Dash Files folder:
http://rapidshare.com/users/7UE30C
Pick the ROM you want it has them all.
Then extract the exe and continue the viewimgfs steps in that thread using the 64mb file you extracted. I think you might need to use prepare_imgfs first actually, since the nbf is different from a raw dump, erm sorry can't remember exactly. But I have extracted XIP ROM files this way so I know it works.

indiekiduk said:
type cd .. to go up a dir
Click to expand...
Click to collapse
all I get is this..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

indiekiduk said:
By the way the dash rom is available to download. You only need to dump when its a new device which hasn't had a ROM update released.
Go here and go in the Dash Files folder:
http://rapidshare.com/users/7UE30C
Pick the ROM you want it has them all.
Then extract the exe and continue the viewimgfs steps in that thread using the 64mb file you extracted. I think you might need to use prepare_imgfs first actually, since the nbf is different from a raw dump, erm sorry can't remember exactly. But I have extracted XIP ROM files this way so I know it works.
Click to expand...
Click to collapse
thanks, i'll try this, didn't know you could extract from an exe. never tried to get anything out of exe's or roms.

oplitic said:
all I get is this..
View attachment 37007
Click to expand...
Click to collapse
cd .. i said. Where are your 2 dots

indiekiduk said:
cd .. i said. Where are your 2 dots
Click to expand...
Click to collapse
oh, i thought that was a pause in your typing, lol.

oplitic said:
oh, i thought that was a pause in your typing, lol.
Click to expand...
Click to collapse
To move to the rood directory (C:\>), type cd\ and hit enter. cd.. only moves up one directory.

oplitic said:
I tried dumping the Dash rom, but can't get this way to work (in the thread about the carousel someone said this would work) http://discussion.treocentral.com/showthread.php?p=1203197
Click to expand...
Click to collapse
this link isn't working for me. It says "Sorry. The administrator has banned your IP address." But I have never been there on this page.
Could you please post how to dump.
And is there also a way to get this dumped ROM back on the phone when I want to set it back to the original ROM?
I have a german O2 XDA Cosmo and there is no original ROM to find but I want to have a way back - and of course I could upload (to a secret place of course ) for all of you to try it out.

I don't know anything about the XDA so I dunno if it still works for it or not.. but this is what Hannip wrote in his post...
I'm afraid it might be too much for a newbie. First you have to make a registry change using your favorite registry editor such as Resco.
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
Then you have to download and install the itsutils package from
http://nah6.com/~itsme/download/itsutils.zip
1. Unzip the contents of itsutils.zip on c:\itsutils
2. Connect your Treo 750 to PC using USB cable, and make sure ActiveSync is running and connected.
3. Open a command prompt on your PC (Start->Run enter cmd.exe)
4. At the command prompt cd c:\itsutils\build
5. List the rom partitions using the following command.
C:\itsutils\build>pdocread.exe -l
You should see a result such as:
Part00 0x31fc00 3199KB
Part01 0x2e0000 2944KB
Part02 0x2a80000 43520KB
Part03 0x4360000
You will be extracting Part00, Part01 and Part02.
6. Extract the parts
C:\itsutils\build>pdocread -w -d FLASHDR -p Part00 0 0x31fc00 Part00.raw
C:\itsutils\build>pdocread -w -d FLASHDR -p Part01 0 0x2e0000 Part01.raw
C:\itsutils\build>pdocread -w -d FLASHDR -p Part02 0 0x2a8000 Part02.raw
Make sure the hex starting addresses in the above commands match what was listed from step 5 for each partition before executing the commands.
If successful you should have 3 files. Part00.raw, Part01.raw and Part02.raw. Now would be a good time to zip this up and upload to the xda ftp server if you wish to make this available for others to help you.
Ftp it to ftp.xda-developers.com using USERNAME: xdaupload / PASSWORD: xda. If you've never used ftp before let me know and I'll give step by step.
7. The key partition you will be interested in is Part02.raw. It is the imgfs that contains most of the rom files. To extract the files from it you will need to download some more tools.
Dowload imgfs_tools_182.rar from this url and extract to the folder where your Part02.raw file is in.
http://forum.xda-developers.com/showthread.php?t=249836
Run the following two commands.
prepare_imgfs.exe Part02.raw -nosplit
viewimgfs.exe imgfs_raw_data.bin
All of the files will be extracted to a dump folder.

@oplitic: thanx a lot for posting
meanwhile I figured out that I can access from my PC at home - maybe treocentral doesn't like my company - but I have nothing to do with smartphones or Microsoft/Palm SW development at work...
it looks like it's a similar way itsme does with his bkondisk (see also HTC Exalibur technical wiki)
I managed to backup my ROM with it, but I still cannot find anything how to get the ROM back to the phone...
So if anyone find out please, please let me know
P.S.: the XDA Cosmo is of same construction as the Excalibur/Dash - don't why O2 decided to name it XDA - it's NOT a PPC

@oplitic: this method won't work on excalibur, see the wiki page. Will only work on devices such as hermes and trinity...
@r0p3: Excalibur bootloader will not allow you to flash unsigned code, and pdocwrite will not work on SamsungOneNAND. At the moment you won't be able to flash a dumped rom on excalibur with the existing tools.

pof said:
@oplitic: this method won't work on excalibur, see the wiki page. Will only work on devices such as hermes and trinity...
Click to expand...
Click to collapse
I figured out that it wouldn't work last night, and have been trying to extract files from the exe for the WM5 upgrade. But I get to the last step and can't get it to work. I have the raw file but it won't dump it into a folder...
this is what I've been using to try to dump it out of the raw file...
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoExtractImgfs
by the way I used this page to extract from the exe file...
http://forum.xda-developers.com/showthread.php?t=294694

Get this
http://forum.xda-developers.com/attachment.php?attachmentid=25951&d=1143675141
and type viewimgfs yourdump.raw

indiekiduk said:
RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe
Click to expand...
Click to collapse
Will this work and not damage my HTC S620?

i to would like to know what it takes to take the .exe wm5 tmobile rom (before its installed on the device) and dump it so i can get some files off of it...???
Is that "doable"???
Jeff

jeffro01 said:
i to would like to know what it takes to take the .exe wm5 tmobile rom (before its installed on the device) and dump it so i can get some files off of it...???
Is that "doable"???
Jeff
Click to expand...
Click to collapse
it's suppsed to be doable, but I get to getting the raw file and can't open that. tried for a couple days but then said forget it..

pof said:
@oplitic: this method won't work on excalibur, see the wiki page. Will only work on devices such as hermes and trinity...
Click to expand...
Click to collapse
It works exactly as described in oplitics post - I did it recently.
Important thing is the "-nosplit" Option for prepare_imgfs and that you replace FLASHDR with DSK1: and the hex values correctly as given by pdocread -l
Although I had no luck with the files created by bkondisk
@r0p3: Excalibur bootloader will not allow you to flash unsigned code, and pdocwrite will not work on SamsungOneNAND. At the moment you won't be able to flash a dumped rom on excalibur with the existing tools.
Click to expand...
Click to collapse
I hope this SSPL trick like for the Breeze would do it

r0p3 said:
I hope this SSPL trick like for the Breeze would do it
Click to expand...
Click to collapse
SSPL has an hermes or trinity IPL embedded, that won't work on excalibur. The hermes SSPL works on breeze because breeze & hermes IPLs are quite the same, but compare them with an excalibur IPL and you'll see what i mean.
You can probably replace the resource on the exe with an excalibur IPL, or try to contact Des for help with SSPL.

thank you pof!
shame on me - this became a cross post
will continue here regarding flashing any ROM (I hope)

[NEW RELEASE] ◄ HyperCore Kitchen ► MULTIDEVICE !!!

HyperCore
PUBLIC BETA​
The most complex KITCHEN a begginer cook may ever need.
Easy to use but also very complex, it can be usefull to anyone.
Why ask and wait for others to make the perfect ROM for you when you got the power to do it yourself ?
~. Base ROM .~​* NO BASE ROM ! but ANY ROM !
~. Best part .~​* IT USES TADZIO TOOLS
* YOU CAN OPTIMISE EXE's and DLL's, SO IF YOU WANT EVEN MORE SPACE, YOU'LL GET IT
* IT CAN BE USED ON ANY DEVICE WITH VERY LITTLE MODIFICATIONS !!!!!
* NO LONGER LIMITED BY ANYONE OR ANYTHING.
* YOU CAN COOK ANY ROM YOU LAY YOUR EYES ON VERY EASY
* IT HAS ADVANCED ERROR CHECK
~. It will install .~​Core folder on the system drive. Some tools and settings required.
HyperCore folder on the Desktop. There is your kitchen. You can move it wherever you want.
The place where you actually use it is HyperCore\Panel.
~. How To .~​- First of all edit the file named "Device.txt" located on the "Core\ACK\" folder located on systemdrive (mostly drive C:\)
Edit as following.
If you have a :
HTC Wizard : " set device=Wizard "
HTC Hermes : " set device=Hermes "
HTC Artemis : " set device=Artemis "
HTC Herald : " set device=Herald "
HTC Universal : " set device=Universal "
HTC Trinity : " set device=Trinity "
HTC Prophet : " set device=Prophet "
Click to expand...
Click to collapse
Save it and then you're good to go.
It's much similar to the old Core kitchen...so those of you who used it ...will feel comfortable with it. Regenerated batch scripts, better, and i hope bug free.
~. Guides .~​* Hermes Cookbook - THANKS to sambartle
* My Way of cooking
* How to ADD/REMOVE programs -THANKS to mfrazzz
~. Notes .~​Since this is still a public BETA, I await your problems/ideas/concepts.
If you spot a bug, i suggest to send me a PM as well as a post on the thread.
I suggest having a ROM to make a backup in case you do something wrong
I created and tested this tool for WindowsMobile 6 , but WM5 should work OK too.
~. Download .~​
RapidShare
Special thanks :
* Papamopps - for real support
* nandlal_mk - for answering questions and DSM editor
* mfrazzz - for being a calm, intelligent and helpful person
* mUn - for finding the time to answer some of my questions
* molski - for i started working on his tools and still used some of them
* Tadzio - for his tools and patience
* bepe - for his tools
* the-equinoxe - for his splash-screen tools
* naboleo - for his initflashfiles generator
* dutty - for his NBH Tool
few others that surely i forgot to mention Sorry..

For test
Hello,
PM send.
Private69.
@++++

pm send it

anichillus said:
Hi guys. As some of you know i made kitchens for few HTC devices, as the Wizard, Hermes and Artemis.
My new kitchen, named obviously HyperCore, is a multi device compatible kitchen and it will also include your device, the HTC Trinity.
I managed to implement settings for Trinity but i will need somebody to test it, prior public release. Thus, anyone who wants to be a tester, please send me a PM.
I will need someone who is ..not experienced, but have the least of knowledge. I don't mean to be offensive but i'd like to release it later today and...i am in a little hurry, since i have other things on my mind too.
So, I am waiting for your PM.
Cheers !
Click to expand...
Click to collapse
sure I will be happy to test that for you.

itlinux said:
sure I will be happy to test that for you.
Click to expand...
Click to collapse
ops!! I did not read the full message I guess.. I will send you a PM.

Thanks guys. Sorry i couldn't give it a go tonight...i had some problems here
I will let you know first time tomorrow morning.

news??? about this build

hcarrega said:
news??? about this build
Click to expand...
Click to collapse
Sorry...yet another home/personal problem....i just got home
One last check of the kitchen and some fixes for the Prophet v and i will upload.

first resolve your problems then post a rom

anichillus said:
I will need someone who is ..not experienced, but have the least of knowledge. I don't mean to be offensive but i'd like to release it later today and...i am in a little hurry, since i have other things on my mind too.
Click to expand...
Click to collapse
I will be happy to help...........if needed.

Hello guys. Unfortunately i have stressed out with work and...didn't had time to betatest this. So...here you go, everyone can test it and please post your review.
Cheers !

This is my feedback:
1) I take the RUU_Signed.nbh ROM file and Place it in the HyperCore\Extract\Source folder.
2) Now I go in Extact Panel and run Dumprom. It says:
==================== Core Kitchen ====================
= BE PATIENT AND READ CAREFULLY =
======================================================
Device : Trinity
Make sure you placed the RUU_Signed.nbh in the "HyperCore\Extract\Source" folder !
CAUTION !!! : This will clean the "HyperCore\Extract" folder
Press [ENTER] when ready.
Click to expand...
Click to collapse
Ok I've the RUU_Signed.nbh in the "HyperCore\Extract\Source" folder and now I press enter.
It deletes the RUU_Signed.nbh in HyperCore\Extract\Source folder !!!!
Now I have to copy RUU_Signed.nbh in the "HyperCore\Extract\Source" folder one more time
Ok
3) Now it launch the Dutty good NBH tool. I selct the RUU_Signed.nbh and extract the files in the same folders
4) Now in "HyperCore\Extract\Source" folder I've this files:
a - RUU_Signed.nbh
b - PrimarySplash.nb
c - SecondarySplash.nb
d - Windows.nb (the ROM).
I think the d file must to rename in OS.nb. It's right?
infact it says:
==================== Core Kitchen ====================
= Program Complete =
= Any donations are much appreciated =
======================================================
Device : Trinity
* ERROR !!! There is no OS.nb in "HyperCore\Extract". Operation FAILED
Select your option and press [ENTER]
[1] - Start "PKG Tool"
[2] - Move OS.nb to "HyperCore\Build\ROM"
Press [ENTER] to EXIT.
Answer :
Click to expand...
Click to collapse

cicciocant said:
This is my feedback:
1) I take the RUU_Signed.nbh ROM file and Place it in the HyperCore\Extract\Source folder.
2) Now I go in Extact Panel and run Dumprom. It says:
Ok I've the RUU_Signed.nbh in the "HyperCore\Extract\Source" folder and now I press enter.
It deletes the RUU_Signed.nbh in HyperCore\Extract\Source folder !!!!
Now I have to copy RUU_Signed.nbh in the "HyperCore\Extract\Source" folder one more time
Click to expand...
Click to collapse
No, you don't have to. It will backup the RUU_Signed.nbh before cleaning the Extract folder and then it will move it back...at least it should do that.
Ok
3) Now it launch the Dutty good NBH tool. I selct the RUU_Signed.nbh and extract the files in the same folders
4) Now in "HyperCore\Extract\Source" folder I've this files:
a - RUU_Signed.nbh
b - PrimarySplash.nb
c - SecondarySplash.nb
d - Windows.nb (the ROM).
I think the d file must to rename in OS.nb. It's right?
infact it says:
Click to expand...
Click to collapse
That i don't understand...mabe you should try again. It should automatically rename Windows.nb into OS.nb ...

Ok the RUU_signedònbh is in extract and not in extract/source and I must to ectract the windows.nb in extact and not in extract/source .
It'sn't write anywhere.
Now it seems to work

For create pakcage form Cab there is anithing (guide? software?)
Where I've to place the package?

For anichillus
Hello,
I m trying your program and can you make a new up to date help for use your soft.
thanks.
Private69.
@+++

cicciocant said:
For create pakcage form Cab there is anithing (guide? software?)
Where I've to place the package?
Click to expand...
Click to collapse
There was one...on the website..but it's down.
Check the HyperCore\Panel\Extra folder. You will find there some stuff you may probably missed. There is one initflashfile generator...
Basically :
Create a new folder with name of your programs without spaces
extract contents of that cab with CabAnaliser (Extra folder) without paths..so all files are in the same folder.
Create a .dsm to which you assign an UUID ( http://www.famkruithof.net/uuid/uuidgen )
create the initflashfiles.txt with the help of the initflashfiles generator and place it in same directory
Create the "your_UUID.rgu" ..here are your registry settings. So...you create a new text document, write "REGEDIT4" first line, leave last line blank, copy inside it registry settings you find with the CabAnaliser ...and then save it as UNICODE.
Fix errors...like if the program doesn't have an install dir and in the path you find %installdir% that is in the initflashfiles.txt and in the .rgu.....
I have explained this before couple of times...it's better if somebody guides you to it.
private69 said:
Hello,
I m trying your program and can you make a new up to date help for use your soft.
thanks.
Private69.
@+++
Click to expand...
Click to collapse
What do you mean ? ... I didn't understand

For anichillus
Hello,
The help file attached to your software does not correspond exactly to this version of the software. Is it possible for you to provide an help file step by step on how to use it ?
Right now i extracted the 5 files using the utility DutyTools, but after i dunno what to do ?
thanks in advance,
Regards,
Private69
@+++

private69 said:
Hello,
The help file attached to your software does not correspond exactly to this version of the software. Is it possible for you to provide an help file step by step on how to use it ?
Right now i extracted the 5 files using the utility DutyTools, but after i dunno what to do ?
thanks in advance,
Regards,
Private69
@+++
Click to expand...
Click to collapse
Like that :
1. Extract rom located in HyperCore\Extract\Source with HyperCore\Panel\Extract\1. DumpROM
2. Convert it to dump
3. Convert dump to SYS and OEM (PKG TOOL)
4. Extract XIP
5. Move XIP and OS.nb to the HyperCore\Build\ROM folder
6. Move SYS and OEM to HyperCore\Build
7. Cook the SYS and OEM located in HyperCore\Build (Add/Remove folders, programs...)
7. Start BuildOS from HyperCore\Panel\Build
Read instructions in the program...and you'll be ok

THANKS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

1st Zinc Kitchen -> WM6.1 Released 07/03/08!!!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally after a week of struggling to get everything right ...
I would like to present to you the 1st Zinc Kitchen
Zn Kitchen: How to & Wiki
but no fancy GUI ... just plain batch files
I would like to thanks all the xda forumers who helped me in making this kitchen ... also the tools that i use inside the kitchen (which all came frm this wonderful forum). Esp for GanFan for making the essential extracting tool & the author of HyperCore Kitchen (& their thread http://forum.xda-developers.com/showthread.php?t=309549)
so now I present to u Zinc Kithen
before that
DISCLAIMER:
I am not responsible in anyway if the cooked rom bricked ur device.
This is not an official rom by o2 although it is cooked from original rom.
Please Use with own free will
How to:
Copy ur downloaded Zinc Rom to ZincRom Folder
Follow the numbers from 1 to 8 ... click on it
*** In No 5 ... it will prompt u a question
Does ..\Kitchen\ROM\XIP specify a file name
or directory name on the target
(F = file, D = directory)?
ANS: D (press enter)
You can add ur packages after done wz No5.
Go to Kitchen folder, PUT UR PACKAGES IN OEM FOLDER.
Cont wz no6. onward
Finally copy ur MarsII_G4.abi to a miniSD & do a bootloader (in CookedRom Folder)
Enjoy
Click to expand...
Click to collapse
To modify Ext Rom ...
1. Use WinImage (attached is the trial 30 days)...
2. Modify the bin & replace in ZincRom/OUT folder
3. Click on no 8.bat to compile back the final MarsII_G4.ABI
Also ... I havent try the cooked rom yet since I am now too busy to do an upgrade of cooked rom
I think i hv sort out all the bug ... but then i am not perfect .... so do report back.
Happy Cooking & Enjoy .....
If anyone want to share this rom in other forum, Pls do so but do give credit/donation to cruzzmz (or better donate for my efforts in making this tool by using paypal button below)
LINK:
Zinc Kitchen
WinImage
To get WM6.1 Ported rom goto : http://forum.xda-developers.com/showthread.php?t=374205
----------------------------------------

d00d you ROCK!!
Keep Up The Good Work!!

Thanks for your
but "...Zinc_Kitchen\7-CreateROM.bat"(Shortcut) is not working

How 2 Update ur ROM
HOW 2 FLASH ROM
1. Copy ur MarsII_G4.ABI to MiniSD less than 2G
2. Connect dev to wall adaptor
3. Press / Hold DPad right
& do Soft Reset
4. Dev will reboot in bootloader mode (3 color screen) & see progress bar
5. After completed updating, dev will reboot
Click to expand...
Click to collapse
--------------------------------------------------------------------------------
rg-6 said:
Thanks for your
but "...Zinc_Kitchen\7-CreateROM.bat"(Shortcut) is not working
Click to expand...
Click to collapse
ehmmm i tested on mine & working .... anyway u can go inside the Kitchen folder & try using the CreateROM.bat there
good luck

Using Package Creator
This is how to use Package Creator
1. Click on Packages creator exe
2. Click on Open cab file
3. Choose ur cab file
4. Click on button no 8 from left
5. Click on Extract
6. Choose where to extract (better on desktop on new folder)
7. Click exit button
8. Click OK to all msg
9. Click on Open package
10. Choose ur extracted folder & choose ur category for the cab
11. Click Complete Package
12. U will see the .dsm link on Generated DSM Name
13. U will see all ur extracted file plus .rgu & .dsm & option.xml in ur extracted folder
14. move to ur Kitchen OEM folder
15. Use buildOS to compile ur rom
Good Luck
Will post some of my packages here soon

That's very nice indeed. Hopefully there are more and more cooked zinc ROMs coming.

myrat said:
That's very nice indeed. Hopefully there are more and more cooked zinc ROMs coming.
Click to expand...
Click to collapse
U can try to add ur own cooked rom

Can somebody please post a mirror for this?
Thanks!

kritsadatang said:
Can somebody please post a mirror for this?
Thanks!
Click to expand...
Click to collapse
where do u want the mirror ??? ill put more mirrors soon

WM6.1 CEOS 5.2.1437(b19199.1.0.0) Ported
Good News ....
WM6.1 Rom Ported to Zinc ...
U can see below
ill post the rom soon

very good news, Thank for your share

cruzzmz said:
where do u want the mirror ??? ill put more mirrors soon
Click to expand...
Click to collapse
Thank you very much.
Prefer Megaupload,Bigshare or others you convenient.

Been using for almost 1 day ... no freezing or hangs .... quite good
Installed progs:
1. S2U2
2. SmartText
3. SMS Fix
4. FTouchFlo
5. rlToday
6. LGMenu
7. Agenda Fusion
8. PTravel
9. Resco explorer
10. Registry editor
11. Oxios
12. QuickMenu
will report back on the rom soon after a week

Thank you!
Thank you! Thank you!
Out of town this week, but more than happy to try it on the weekend when I am back.
Thx again!

common d00d, where's the rom
cruzzmz said:
Been using for almost 1 day ... no freezing or hangs .... quite good
Installed progs:
1. S2U2
2. SmartText
3. SMS Fix
4. FTouchFlo
5. rlToday
6. LGMenu
7. Agenda Fusion
8. PTravel
9. Resco explorer
10. Registry editor
11. Oxios
12. QuickMenu
will report back on the rom soon after a week
Click to expand...
Click to collapse
how do I put it on the phone?

coolestzero said:
how do I put it on the phone?
Click to expand...
Click to collapse
well the programs above i installed it manually since i ported a clean WM6.1 to the current WM6 rom ...
check the link .... patient is a virtue
I am testing it for stability .... remember check the WM6.1 Ported Thread

congratulations..
i wait it for a long time.

Thanks!!!!!!!!!!!
But how can I remove a existed app. in the Zinc ROM to free memory??

dark_knightvn said:
Thanks!!!!!!!!!!!
But how can I remove a existed app. in the Zinc ROM to free memory??
Click to expand...
Click to collapse
what apps do u want to erase? ...

cruzzmz said:
what apps do u want to erase? ...
Click to expand...
Click to collapse
Thanks! i think there are many app. that are not usful such as: Mobile RSS, GPRS monitor, pdf viewer, message plus, messenger, windowlive, o2 auto install, o2 autoinstall, voicommander.. Most of us rarely use them

Creating own Diamond kitchen....

I have finally managed to dump my rom of my TD. My main goal is to create a rom which is personalised for myself with cab files like WIMP, TT, SPB Time etc... programs i bought for my TC.
Now i have 4 .raw files and decided to download the Diamond Kitchen. After download i got a "kitchen" but with the parts from the Diamond rom which ofcourse i don't need.
I have read alot of WIKI pages, but i cannot find a tutorial how to create an own rom with personalised cab files.
What i have done:
1- created .raw files of my current rom 1.37.405.1 WWE
2- Downloaded the original rom of 1.37.405.1 WWE from HTC
3- Downloaded the Diamond kitchen here http://rapidshare.com/files/124999979/Diamond_HH_RomKitchen.part1.rar and http://rapidshare.com/files/125003993/Diamond_HH_RomKitchen.part2.rar (credits goes to caxio)
This is what i have now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In the OEM map i have lots of tools. My guess these are the tools which are going to be installed after a hard reset.
In the ROM map i have a XIP map and a OS.NB.payload file
In the SYS map i have a kinds of dll maps
And in the TOOLS map i have a lot of tools
My first question about this is...how can i extract the files from my dumped rom for the OEM, ROM and SYS maps?

http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoExtractImgfs
This is a site i found for extracting .raw files, but the commands are for linux isn't? I am running windows

Yzord said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoExtractImgfs
This is a site i found for extracting .raw files, but the commands are for linux isn't? I am running windows
Click to expand...
Click to collapse
use tadzio tools for dump it
http://forum.xda-developers.com/showthread.php?t=298327
rename your *.raw file to imgfs.bin and use this method :
Code:
imgfs.bin ---(ImgfsToDump)---> 'dump' directory
cheers..!

or use kaiser system for create sys oem and xip remplace in chinese kitchen
http://forum.xda-developers.com/showthread.php?t=337066
i have used for rebuild italian rom

I have taken a Kaiser kitchen, edited the htcrt.ini, placed RUU_signed.nbh .raw01 and .raw02 in the baseRom folderand pushed on !BEGIN.cmd
Let found out what happens....at first it created errors, but after that it began to make OS.nb etc...

At this moment i am at the HTC rom tool...everything looks ok for now
Is this ok?

Nobody willing to help?

Yzord said:
Nobody willing to help?
Click to expand...
Click to collapse
IMO, if you really read the link that was given by caxio, you will be able to cook your own rom...
http://forum.xda-developers.com/showthread.php?t=337066
what i dont understand is why you are bother to extract .RAW from your device?
you can extract it from the available ROM (maybe using kaiser kitchen from alex), and cook it the way you like it, and repack again using that chinese kitchen...

Hmm, never thought of that indeed. But as far as i could see when i place the raw01 and raw02 files in the baseRom map, it automatically extract the raw files. And i dont know how to do it with the original rom.

Yzord said:
Hmm, never thought of that indeed. But as far as i could see when i place the raw01 and raw02 files in the baseRom map, it automatically extract the raw files. And i dont know how to do it with the original rom.
Click to expand...
Click to collapse
you can extract the original rom and maybe some custom rom using existing kitchen... and with a few clicks you will get OEM, SYS and ROM (with XIP inside) folders...

Ok, what i have done so far is:
placed RUU_signed raw01 & raw02 in the BaseRom
Pushed !BEGIN.cmd and everything is running.
At the HTC rom tool i have selected the OS-new.nb file and created a new RUU_signed.nbh
So for now everything looks fine. But the now the main goal. Creating a personalized ROM with my own cab files and programs.
Before i push !COOK.cmd i can play with the programs i guess in the OEM folder. But is there a tutorial how to add programs to the OEM folder? Or ofcourse deleting it?

look at this: http://wiki.xda-developers.com/index.php?pagename=Kaiser%20ROM%20Kitchen%20Tutorial
that is for kaiser... but the basic will be the same...
anyway i am not so sure that you can use kaiser kitchen to repack diamond...

Hey Yzord,
If you want to add apps to the rom you must convert your cabs to a socalled OEM package.
This package contains all files that need to be installed(*.exe,images and such), a file called "initflashfiles.txt"(unicode) that tells the buildOS where to put the files, and at last an .RGU file that contains registry settings for the programme.
A tool that can do this is called : Ervius Package Creator
Simply open the tool and open a cab file, then convert it to oem and there you go, your own oem file.
Then place the folder into the folder OEM and youre ready to go.
gr. bram
ps. making my own kitchen right now, so when it's done i'll let u know so you can take a peak into it.

teammee said:
look at this: http://wiki.xda-developers.com/index.php?pagename=Kaiser%20ROM%20Kitchen%20Tutorial
that is for kaiser... but the basic will be the same...
anyway i am not so sure that you can use kaiser kitchen to repack diamond...
Click to expand...
Click to collapse
I have downloaded the kaiser kitchen, but in the whole process no Ervius Package_Tools comes up. Also the dos prompt at the start is different.
That is why i ask here, cause the tutorial isnt updated anymore for the latest kaiser kitchen

bram_smulders said:
Hey Yzord,
If you want to add apps to the rom you must convert your cabs to a socalled OEM package.
This package contains all files that need to be installed(*.exe,images and such), a file called "initflashfiles.txt"(unicode) that tells the buildOS where to put the files, and at last an .RGU file that contains registry settings for the programme.
A tool that can do this is called : Ervius Package Creator
Simply open the tool and open a cab file, then convert it to oem and there you go, your own oem file.
Then place the folder into the folder OEM and youre ready to go.
gr. bram
ps. making my own kitchen right now, so when it's done i'll let u know so you can take a peak into it.
Click to expand...
Click to collapse
Thank you very much for your help. I will search for it and please let me know when your kitchen is done...maybe i could get some advice from it.

I see . hoho~~ this is for 七星论坛 and 七星流火 guys make it. sorry my poor english. i want know how can dump the diamond rom,i want get it xip and sys out myselfy build it. somebady can tell me

Yzord said:
I have downloaded the kaiser kitchen, but in the whole process no Ervius Package_Tools comes up. Also the dos prompt at the start is different.
Click to expand...
Click to collapse
I'm using the kaiser kitchen for almost a week now, so yes it will repack it good for the diamond as I flashed a lot of ROMS with my personal (created) OEM package's trying to amke them integrated into my personal rom.
In Kaiser Kitchen u can choose: <p> create a oem package
Also, in the directory of the kitchen there is a folder TOOLS, in this folder you would also find "packages creator 5.4.exe" wich is Ervius Package_Tools or option <m> in the menu.
be sure the kitchen is in the root of your drive(like C:\Kaiser ) otherwise file names could be to long.
PS: if you want some more help (van een nl-er ) just PM me and whe can chitchat on msn maybe

Caspertje19 said:
I'm using the kaiser kitchen for almost a week now, so yes it will repack it good for the diamond as I flashed a lot of ROMS with my personal (created) OEM package's trying to amke them integrated into my personal rom.
In Kaiser Kitchen u can choose: <p> create a oem package
Also, in the directory of the kitchen there is a folder TOOLS, in this folder you would also find "packages creator 5.4.exe" wich is Ervius Package_Tools or option <m> in the menu.
be sure the kitchen is in the root of your drive(like C:\Kaiser ) otherwise file names could be to long.
PS: if you want some more help (van een nl-er ) just PM me and whe can chitchat on msn maybe
Click to expand...
Click to collapse
Hi there,
My Kaiserkitchen doesn't have a packages creator so i guess my kitchen isn't indeed the same as in the tutorial. i will PM you

[Rom release + Kitchen] [French] 6.5.5 (23566) DrX Acer BeTouch E101 - Discontinued

HI all.
Here is my rom for the Acer BeTouch E100/E101, based on a 23566 with all the apps I'm using.
It looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's inside:
HTC phone canvas 4
HTC Album 2
Latest Facebook and Google Maps
Showcase
S2u2
Slide2shutdown
Titanium with Modified Ibrythill WM7 Look
Manila 2.0 2d with personal style
some other tools.
Click to expand...
Click to collapse
WARNING
The rom is in french.
By default, HD Mini Window style is selected, means that you wouldn't had the windows Button; To enable it, symply edit your registry with this settings:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\BubbleTiles]
"TextModeEnabled"=dword:0
"HardwareStartKeyEnabled"=dword:0
"HardwareDoneKeyEnabled"=dword:0
Click to expand...
Click to collapse
BUGS
Manila settings tab is not working well.
Microsoft Tag is in english.
You need to manually select the french language in the s2u2 settings
Pictures Tab can't remember default album if selected on the sd card.
DOWNLOAD
Download HERE (please, accept the non signed certificate).
Enjoy.

[Kitchen] How to create an acer E101 Rom, just for yourself?
First, here's a list of the different tools I've used:
Ryan Kitchen, from Ryan (Acer-club.ru) : http://acer-club.ru/Novaya-kuhnya-dlya-redaktirovaniya-proshivok-t822.html
Xip kitchen beta 6 from this post: http://forum.xda-developers.com/showthread.php?t=443383
Stock rom from acer : http://www.acer.com/worldwide/selection.html (Lauch the utility and grab the flash.bin file located in the installation folder before flashing)
Latest WM build from Da_G : http://forum.xda-developers.com/showthread.php?t=544445
SYS Porting Tool For Ervius Kitchen : http://forum.xda-developers.com/showpost.php?p=6138699&postcount=25
Step by step instruction:
01.Put your original flash.bin from acer website in the "Original_FLASH" folder in the Ryan_Kitchen
02.Execute the first batch "1.Disassemble_Flash.bat" and follow on screen instruction
03.Wait for 1 little minute after the end of the execution and lauch the second batch "2.Disassemble_Flash.bat"
You should now get a kitchen folder wich contains a "OEM", a "PACKAGEs", a "ROM" and a "SYS" folders. (and a dsm file on the root).
04.Delete everything in the ROM\XIP folder except the "boot.rgu" file.
05.Delete everything in the Sys folder, except the .ROM and .VM folders.
Creating your new XIP:
Extract all files from the latest build downloaded from DA_G and grab the xip.bin from it.
Get your actual xip from the Ryan_Kichen\Ectracted_ROM folder
Use Xip kitchen to build your new xip, follow the instruction of the original thread.
Copy the result xip-xip.bin to the Ryan_kitchen\New_XIP folder an rename it to xip_out.bin
Creating your new SYS
Extract all the files you need from the WM build with the sys porting tool for ervius kitchen (follow the original thread instruction)
For the ACER E1, we need to use 96 DPI and 240 * 400 resolution. I'm sure you know your regional code.
Copy all the files from the differents folders to a single one, to get something like what you've previously deleted from the SYS folder of the Ryan_Kitchen\Kitchen folder. Put all those files to this folder.
Copy all the files from the MSXIPKernel and the MSXIPKernelLTK from the WM build folder to the Ryan_Kitchen\Kitchen\ROM\XIP folder
06.Launch "3.Make_Flash.bat" and follow on screen instruction.
PkgToolsBuildOS is now runnig, go to BuildOS, click Load Rom and click The green triangle (play)
An error message appears (g'reloc not found) simply ignore it and close the program.
07.Launch "4.Make_Flash.bat" and follow on screen instruction.
08.Launch "5.Make_Flash.bat" and follow on screen instruction.
Your new rom is in the Ryan_Kitchen\Output_FLASH folder. Rename it to FLASH.bin and copy it to your SDCard.
09.Flash your phone.
It works for me, it should work for you.
Enjoy.

Hi DrX,
Nice, wonder you will create WWE ROM?
As I'm looking for update + WWE ROM
Thanks thanks.

Hi.
Still not previous, just because I already spent a lot of time trying to get something great in french.
But feel free to cook your own rom using the kitchen steps in the second post.

Here's the next step, just to let you know.

Hi,
New french rom manila ready is done and will be released tonight.
Here's what it can looks like.
Regards.
(1rst post updated. )

Rom is released.

Hello
Is it possible to have separate manila to cook in its own roms?

roro59286 said:
Hello
Is it possible to have separate manila to cook in its own roms?
Click to expand...
Click to collapse
I've tried to cook manila directly in the rom without any succes, but feel free to try it.
Just for information, all the manila components used has been grabbed from the official HTC rom for the touch2 (mega).
You can simply used the ryan kitchen linked in the second post of the thread to unpack my rom and copy all the mega package from the OEM folder.
Enjoy.

Hello
Do not understand too much your topic on the establishment of Roms !
Maybe you could explain to me in French?
Thank you

Hey, for the french "support", the best way is to post here: http://forum.hardware.fr/hfr/gsmgpspda/smartphone/betouch-e100-e101-sujet_21426_1.htm

Hi all.
Here's a preview of the next release.

New release.
First post updated.

Hi wonderful rom , but i have problem for download, i don't understand nothing about certificate , do you can post normal download , tks!

just click on ok or continue, the download will start.

I'm sorry but when i click : ok or continue, nothing appear, only "The page cannot be found".
i 've tried with google chrome, IE, Modzila but nothing...

i used , my brother's laptop, and my father's laptop too, but nothing , do you can paste another download?
I went to my friend's house for download but nothing, the same proble , after click, ido "continue however" and after :"The page cannot be found".

Download link is fixed, sorry.

hi,
sorry, but this link not work
Get one link to rapidshare or other server?
MERCI d'un compatriote

this is just what i need. but can i change the language? to EN or PTG? how if its possible...