I installed the HTC Diamond Home cab and everything was running fine but I messed up the pictures on it half were white and half were black so then I uninstalled that way I could fix that issue and when it rebooted it wont turn back on its stuck on the Windows Mobile splash.
And I have wm6.1 installed.
Related
Hey all,
I recently (this afternoon) installed the Windows Mobile 6 (Black and Blue) version 4.0 touch onto my O2 XDA (Artemis), all was working fine but I've just restarted the device and it just sits on the boot screen:
---------------
Windows Mobile
Direct Push Technology
Black & Blue
v4.0 touch
PDAVIET
----------------
I hear people talking about soft reset and the soft reset button (where is this?) and does anyone have any other ideas as to how I could fix this?
Managed to fix it by reinstalling the ROM.
Managed to fix it by reinstalling the ROM.
Hello, i have a new P3300. The first time i opened it it started installing some basic stuff/programs and then worked quite good. Then i turned it off and when i turned it on again it shows the first splash screen with the htc logo, shows IPL and SPL versions on the left top side (like it should do) and then it instantly turns off. I have tried installing the official WM6 ROM again and again but after the installation finishes the problem remains. Also, when in confirmation dialog for the ROM to be installed or not when it shows the old and the new version, the old is completely blanc.
P.S.: Something else, when i connect it to charger (or USB cable) the orange light keeps going on and off about every 30 seconds.
Any help would be highly appreciated guys.
Send it back to your vendor for warranty...
Cheers
After many tries i managed to install some older official ROM but again after the initial screen calibration and the other stuff some customizations started installing and when PDA rebooted the problem appeared again. But tomorrow I'm getting it to service (and getting my Qtek 8310 back which by the way got a repair although unlocked ).
FIXED NOW!
Need help.
I burned the new Kavana ROM. everything was working ok.
placed my microSD and the device didn't recognize it, so i rebooted.
upon reboot the device got stuck on the white HTC screen.
pulled battery
tried again, rebooted, past the HTC screen to the Windows Mobile welcome screen but freeze again. hard reboot didn't respond.
pulled battery, then turned back on. device didn't even turn on!
tried several times with/without battery hooked up to power , and with/without SIM and/or microSD (all possible combinations) and nothing.
had lunch
went back to it and the device magically booted it but after the white HTC screen i got a blue screen asking about error from last reboot. said yes to correct. rebooted went past white HTC and into Windows mobile welcome screen and froze again.
repeated the process several times and finally got to the blue screen again asking about error from last boot, this time said 'no' and device continued boot in a white screen without HTC logo and froze.
all hard reset attempts were unsuccessful (if i'm doing it right: hold two soft keys and then power button).
now the device boots to the white HTC screen and then is stuck.
what to do?
edit: got the hard reset to work and reconfigured my phone. i only noticed the black screen for a split second because my Dash has issue that it thinks that the green send button is being pressed all the time (anyone know how to fix that?).
Thanks
Find your original rom in sticky, go into bootloader and flash original rom, then flash to wm6.1.
have the same issue!!... did you fixed? the main problem is activesync is not running so how do i install another ROM?
Active sync doesnt have to be working aslong as u got ur s621 pluged in and u wait for a few seconds before starting the ROM it will work.
I am having diamond touch which is not booting up it always restarts on the screen showing windows mobile 6.1. When this problem started i was using SUN Y 6.1 - Manila 2.5.1920. I thought this problem relates to ROM so I have switched back to original Rom but still the same problem persists. Can anyone suggest the reason and solution of the above problem.
same problem I had 3 days ago, do hard reset and choose option 2 /volume down/ to format.
Booting up
Just reinstall Hard-SPL.
Good luck!
Hi
Well, my desire rebooted yesterday because of overheating (as usual).
But this time it got stuck at the white screen with green HTC logo. Rebooted it 30 times but no progress.
I can get into Bootloader (0.93) but when i press RECOVERY, it reboots and the bootup screen is there again. Waited for one hour but nothing happened. It´s like i can´t use the RECOVERY function.
Tried to install the original froyo from Windows. Got to the step when the setupprogram reboots the phone into Bootloader, but then connection between my Desire and my PC is lost. The setup program only recognizes my Desire when i´m in FASTBOOT, as soon as i switch to bootloader the program can´t find the Desire.
Should i have the bootloader drivers installed on my PC or the HTC Sync drivers? or both? none of them?
And what´s wrong with my phone?
THANKS FOR YOUR ANSWERS....
got it working anyway, tried 3000 different ruu´s and the last of them worked.
3000 - lol!!