is mine signed or not? - Touch Diamond, MDA Compact IV ROM Development

Hi just gone into bootloader and info on screen spl-1.40.olinex, bought the phone unlocked, originally orange, how can i tell if this has the signed or unsigned version, i would like to use unsigned and to update radio and rom have read through tut and would like to give it a go.
Rom ver 1.37.405.1 wwe
Rad ver 1.20.olinex
Protocol ver 52.26a.25.09h
Thanks

try flashing an unsigned rom, if it works, then your unsigned.

Thanks, would i need to update radio first?

you can flash any radio/rom combo you wish! i recommend any of the 1.00.25.xx radios, and of course a 1.93 rom

thank you again, lastly would i need a wee version for english?
Allan

Related

Latest Radio version - where, 1.11 or 1.12?

Hi, I have 1.11 but have seen talk of 1.12, but only been able to find it for non-universal devices. Can I use the radio form a non universal 1.12 or alternatively where can I find the latest Universal radio?
I recently put the new Vodafone ROM on the device and notice that it rolled the Win CE version back! Compared to the previous 02 version!
Greg.
greg123 said:
Hi, I have 1.11 but have seen talk of 1.12, but only been able to find it for non-universal devices. Can I use the radio form a non universal 1.12 or alternatively where can I find the latest Universal radio?
I recently put the new Vodafone ROM on the device and notice that it rolled the Win CE version back! Compared to the previous 02 version!
Greg.
Click to expand...
Click to collapse
Up right now only had verison 1.11.00 never hear had 1.12.00 radio rom,if you used others device's radio rom flush into Universal that will not be used., 1.11.00 radio rom you can find in Dopod rom.
Then I must have the latest radio rom, as I have included 1.11 in my build. Cheers, will await futher releases! Greg.
Then I must have the latest radio rom, as I have included 1.11 in my build. Cheers, will await futher releases! Greg.

does 1.93.707.1 requires any hard SPL?

I'm trying to switch from 1.37.207.2 to 1.93.707.1... but it gives error after 1 %. Do I also need to flash SPL as in the case for cooked ROMs?
No answer for me?
Have u flash hardspl in to your device? propebly you must do that if you want the 1.93 rom
Actually I have done nothing on my phone up to now... It was stock SPL which was 1.37... you think I need an unsigned SPL? but 1.93 is also original ROM from HTC... I am confused...
ofcoure you can flash this but since it stuck on 1% it can be that the CID in your phone and the 1.93 rom dont match. So u must hardSPL
In general you only can flash the rom you download from HTC e-club without hardspl.
Thanks bro...
HELP on 1.93 ROM
HI i am new to HTC and i have ROM version 1.37. I installed the hardspl unsigned olinex 1.37. now pls can anyone give me the ROM 1.93 to download and how shall i do it? i downloaded several ROms but i cant seem to know how to start it :/

O2 Xda Diamond

Hi,
I need to flash my o2 xda diamond in order to change its language from German to English. I have flashed it with Hard-SPL-Diamond-OliNex from location http://forum.xda-developers.com/showthread.php?t=400402. But when I try to run WWE (I have tried using RUU_Diamond_hTC_Asia_WWE_1.93.707.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship and RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08_0.93.25_Ship) it gives me Update Error[262] all the time. Recovery procedure does not work in any case. I have tried reinstalling ActiveSync as well as disabling Antivirus software but to no avail. Please suggest which Hard SPL and WWE ROM should I use. Please help as I dont want to brick my device!
Thanks,
Omer Javed
But when I try to run WWE (I have tried using RUU_Diamond_hTC_Asia_WWE_1.93.707.1_Radio_Signed_D iamond_52.29.25.12_1.00.25.05_Ship and RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship) it gives me Update Error[262] all the time.
Click to expand...
Click to collapse
You can't update a Hard SPL-ed device with both mentioned updates.
Hard-SPL has an protection so you can't flash the SPL (A Hard-SPL can only be reflashed by using a Soft SPL to flash the replacing SPL).
You need to strip the shipped ROM of its IPL/SPL, or choose a custom one without IPL/SPL
Choose a custom ROM without IPL/SPL, there are many available.
But you need to check if you flashed the Signed or the Unsigned Hard SPL, then choose your ROM accordingly.
equinoxe,
I flashed it with Unsigned Hard SPL( I am assuming that the zip file without 'signed' in its name is the unsigned one). It would be a BIG help if you could just name a few custom ROMs without IPL/SPL . Thanks a bunch.
Best,
Omer
What about SwiftBL-WWE-Diamond-ROM-v5.6.zip from following link http://forum.xda-developers.com/showthread.php?t=408109
Specs:
ROM Information:
OS: Windows Mobile 6.1 Professional
OS Version: CE OS 5.2.20273 (Build 20273 AKU 1.3.3)
OS Date: 28-7-2008
Base ROM Version: 1.93.405.1 UK WWE
Base ROM Date: 17-7-2008
SPL: Not included
Radio: Not included (Will retain the current radio in your device)
??
Thanks,
Omer Javed
I have successfully upgraded Olinex 1.30 to Olinex 1.40 developer edition and have flashed with SwiftBL ROM. It works like a dream! Thanks xda developers.
Cheers,
Omer Javed
Need help
Hi,
Can you please let me know what exactly you did to change the language from German to English. As i have got the same Phone from O2 and want to change the language to English.
Thanks in advance
Kohir
Can someone please help me here
Hi,
Go to link : http://forum.xda-developers.com/showthread.php?t=408109
Read Installation Instructions section. Download one of the SPLs mentioned (OliNex Unsigned Hard-SPL Developers Edition OR jockyw2001's HardSPL 1.24) and flash your device with it following the instructions. Then download SwiftBL WWE Diamond ROM , version 6.2 is latest so better use this one. Upgrade your current German ROM with SwiftBL and voila!
Best of luck,
Omer

Radio 0.00.00??

i just bought a used o2 exec I want to flash it but when i looked in device info it says my radio version is 0.00.00, is this bad? It looks like its the orignal o2 ROM, everything else looks fine...
ROM version: 1.30.107 WWE
ROM date: 04/11/06
Protocol version: 42.37.P8
ExtROM version: 1.30.162 WWE
and my bootloader is version: 2.01
Unlocked...
Radio ROM Version 0.00.0 Is A Special Radio Used To Unlock The Device.
My Guess Is That They Unlocked It Before Selling You It And Didnt Reflash The Radio.
Next Time You Flash Your Device Flash The Radio Rom Aswell.
Regards,
OllieD
OllieD said:
Radio ROM Version 0.00.0 Is A Special Radio Used To Unlock The Device.
My Guess Is That They Unlocked It Before Selling You It And Didnt Reflash The Radio.
Next Time You Flash Your Device Flash The Radio Rom Aswell.
Regards,
OllieD
Click to expand...
Click to collapse
thank you.
good radio you have in T-mobile version: 1.17.00 - for me the best, and other also very popular is 1.18.00 ...
best!
My Universal left unuse for a couple months and radio changed to 0.00.00 .
I just flashed it and upgrade to WM6 rom, but failed.
Somehow, use MaUpgradeUt_noID.exe to fix it (new ce and radio) and run for a week now.

Need to load back SPL-2.03

Ok all expert here i want to ask a question. I want to send my diamond for a repair that still in warranty. before this i've load olinex unsigned 1.93 spl. but when i reflash to original official 2.03 rom the spl is still the same and not the 2.03 version one. I've done using the nbhutil to extract the spl module from official rom and make it an nbh format. but when i flash the spl only it still the 1.93 version. how is this happened?
**do u really think that they will check for the spl version before repair instead of official rom loaded? i'm afraid just because of the spl version is not the official one will void the warranty.
please help me. sorry for poor english.
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
mrm2007 said:
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
I already flashed to the stock 2.03 rom but when i check the bootloader version its still spl-1.40 olipro. before this its spl-2.03. so how?
Your SPL is Hard-SPL, meaning: write protected. You can only overwrite it using Soft-SPL (= SSPL). Search and you'll find it.
I had to return my handset and returned to different official ROM and SPL than supplied by the operator. So I would suggest to use 1.93 for both check this post/thread. Once you have your phone back to 1.93 for both SPL and ROM - Load your 2.03 ROM which should update the SPL too.
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
Check the top of the same thread too HERE
if you search ( ReStore Hard SPL ) you can see my post about your problem
Hello, and everbody hello,
please tell me, is it possible people from company where i buyed HTC diamond
Diam100 64m
microp-diam (led) v11
psoc-diam stage_pvt v0x32
to discover, am i changed STOCK SPL to HSPL unsigned, when i back to STOCK SPL uploaded in post #20 , i'm not sure which one from that post to use ?
1.34, 1.38 , 1,93 or ?
I'm not sure what was originally - stock SPL which came with my phone , i sent mail to HTC support to ask him, do they know to tell me over S/N what was first originally SPL on my phone, but they tell me all information what they have, but not 1st version of SPL.
Information are like this
SN :HTxxxxxxxxxxx IMEI :xxxxxxxxxxxxx Part Number :xxxxxx-00 Part Description :SKU,HTC,Swedish,SWE,UMTS 900/2100,Cut,Black,Diamond-XX,w/oSIM LockSIM Lock Customer Name :xxxxxxx : HTC Model DIAMOND-XX
this phone is buyed in Sweden, and my problem is, i don't know what version of STOCK spl from post #20 to use for warranty, cause i have to send my phone in service for repairing, but what Stock SPL to use, for no discovering from people which work in repairing service?
I remember version of stock rom was 1.93 Swedish, one before latest, but for SPL i'm not sure, maybe 1.34 or 1.35, i scarried they will discover me, i used HSPL, and i don't know what stock SPL to put on my HTC for warrant and no discovering about using another SPL-s like HSPL , unsigned,signed etc..?
Tnx in advance everbody for help!
God bless you
Greetings
p.s.
Phone is buyed - unlocked, not signed for some mobile operator or similiar! It came just with stock ROM - 1.93 swedish, and maybe 1.35 spl or maybe 1.93, it's buyed before 1-2 month, maybe that will help me to discover which was stock SPL, and which one i have to use for warranty?
please somebody help, cause this is urgent for me, i have to send phone in service today
tnx in advance,
greetz

Categories

Resources