hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
progress..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
Hello. I've had some problems with my Qtek 9090 for some time now. When i turn it on it just stays at the boot screen (3 colors etc.). And when i hard reset it, it stays at the white screen and nothing happens (then i have to soft reset).
Is there anything i can do? I was thinking of a software that cleaned the phone totally, but could be runned in bootloader (the screen with "Serial" and V. 2.06)?
Or can i do something else?
Spixe - And sorry for my english..
This link may be of some help
http://forum.xda-developers.com/showthread.php?t=281959
having dropped my n96 i have just got my old Mini S back from a friend, i switch it on and it just hangs on the O2 boot screen with IPL 2.21.0001, SPL 2.21.0001, GSM 02.07.10, OS 10.0.0.10 on top left of screen, i have tried hard boot but it does not fix things. HELP
Friends stuck in black screen while loading Diamond SPL and now does not open, or about information that may help you do that? respects ...
Hi,
P.S: I have read almost every post and thered and wiki and what ever, nothing worked for me, need advice.
My ppc is i-mate jasjam herm100
ipl-1.00
spl-1.04
it was running just fine, then out of the blue, it hang i reset the phone with the styles as I was unable to shut it down due to the hang, once restarted it is stuck on the tri-color screen.
tried to restore defaults, using the front 2 softkeys and the reset with the styles, then i confirmed the restore pressing the 'R' button it took 1 sec and told me it is restored, tried to restart the phone same tri-color screen, so I have been every where forums wiki post to solve this issue but was unable, I don't need to be WM6 or any thing I just need my phone working even if running WM3 "kidding" all what I want is the phone life and kicking again, if any one can help me here, it is appriciated alot.
Thank you.