Hi,
I was looking on this thread :
http://forum.xda-developers.com/showthread.php?p=2616636
I want to set PagePool to 0mb on any rom I want to install on my HTC Diamond.
Does any body report a success on this modification,
I have heard that this change will make HTC Diamond running faster.
So, I hope any body have test it on HTC Diamond Rom before me.
So waiting for success story.
See ya
Tried this changer, but it don't work to Diamond, I think.
At least DevHealth show the same, as before - 8M.
no diamond
in list of phones it works on
mondilv said:
Tried this changer, but it don't work to Diamond, I think.
At least DevHealth show the same, as before - 8M.
Click to expand...
Click to collapse
I have try the last version (2.21)
and after change page pool of dutty rom to custom 0 value, save it
close, reopen same rom, I have the custom 0mb sets !
I have test on TOR which is know to have set's his pagepool to 0mb, and I see it !
So, I think it's ok, but ... I'm wondering if I do a flash with that, I don't have any risk of breaking my phone.
and will I show more speed that before ?
I can test it myself, for speed, I just want to know if any body have test the lastest version without any prob
I have used v2.21 with Dutty's ROM v1.9 and I have set PP to 0 MB.
Flashed, and it works without any problems.
I have used the pagepool changer alongside a few of my roms, and have now come to the conclusion in terms of speed and stability, tweaking the rom rather than changing the pagepool is a lot more stable and less memory hungry.
I have watched my diamond crash a few times now using a zero pagepool, and am now using a default 6mb as before...
amzchhabra said:
I have used the pagepool changer alongside a few of my roms, and have now come to the conclusion in terms of speed and stability, tweaking the rom rather than changing the pagepool is a lot more stable and less memory hungry.
I have watched my diamond crash a few times now using a zero pagepool, and am now using a default 6mb as before...
Click to expand...
Click to collapse
Ok I see, thanks for that
I will try it myself just for knowledge
On TOR rom, I have seen that AudioManager crash ofter, perhaps is tools like tomtom that make it crash, but perhaps is the pagepool 0 ...
I will try on dutty
geistteufel said:
Ok I see, thanks for that
I will try it myself just for knowledge
On TOR rom, I have seen that AudioManager crash ofter, perhaps is tools like tomtom that make it crash, but perhaps is the pagepool 0 ...
I will try on dutty
Click to expand...
Click to collapse
my audio manager has never crashed.perhaps u should try my v3 wich im uploading right now. I call it THE-ONE cause its a full port of RAPHAEL with many fixes
alphazero said:
my audio manager has never crashed.perhaps u should try my v3 wich im uploading right now. I call it THE-ONE cause its a full port of RAPHAEL with many fixes
Click to expand...
Click to collapse
Yeah, I will test it
So could you provide OS version ??? is it still base on Official version (little bit old so ...)
People I have talk about of your rom (v2) has found that the speed is nice, but can't install all tool they usually use (I have made a pack with .NET3.5 by default, so test with that)
For exemple : Skype don't work, I don't know why, I don't use it (I prefer VoIPbuster, which don't need my phone or wifi to be used )
so v3 is base on what ?
Related
The Elite Team Proudly Introduce the Elite 1.0 ROM!
This ROM is based on the 1.35 Europe Version from HTC
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Now, you MUST have HardSPL INSTALLED before you can install this ROM.
(and no i dont know if it works with the dollypro version, as i dont want a $700 brick)
Now back to the issue at hand, i have cleaned out the HTC ROM and removed / changed the following
AutoUpdate (as this will NEVER WORK)
Replaced .Net CF 2.0 with 3.5 (Massive Speed Improvement)
Removed the WelcomeCenter (no one uses it)
Removed the sample music
Tweaked the RAM allocation
Enabled HSUPA (disabled by default)
Enabled the usual SecurityProfiles (RAPI etc)
Removed that (gay) HTC startup jingle
Specs
Free RAM on first boot is 60MB
Free Storage is about 90MB
(and this is only the start of things to come!!)
A speed improvement by at least 30% (i reckon anyway)
Many thanks to the usual crew
cmonex, Olipro, bepe for his tools, pof, mrvanx, (and everyone else)
Download Link 1
Download Link 2
Download Link 3
If you like our work
Please donate to the Elite Team
ill take this one
and this one too!!!
will this brick my hermes? lol
well done!
Any screenshots?
Yzord said:
Any screenshots?
Click to expand...
Click to collapse
no point, ALL modifications were made to the backend, but just for you ill try and do some up!
Thanks for your teams work updating rom now
What reg tweeks are included if any?
HTC_GLOW said:
Thanks for your teams work updating rom now
What reg tweeks are included if any?
Click to expand...
Click to collapse
i left the gplycache at Auto and the same with the FATFS as i've been testing this for weeks and modifying those values seems to cause some stability issues with the diamiond, so i worked on the RAM allocation and running processes, but this is a work in progress and this is only the first release of MANY!!!
Yes, released sooner than we anticipated.
However, this also means that Hard-SPL Developer Edition will be made available *TODAY*
Thanks for fast reply, working on a rom which uses the gsensor.dll and interfacing this with manila using LUA scripts and XML to create a motion based UI. this project would ultimately become an API or SDK for others. Thanks
just installed..no problems.
device is in config mode..
thanks..
Installed without issues as well. seems fast. I'm not getting the free memory of 60mb, only showing 47mb but I didn't check before activating activesync exchange so that's probably about right.
WOW
walshieau said:
The Elite Team Proudly Introduce the Elite 1.0 ROM!
This ROM is based on the 1.35 Europe Version from HTC
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Now, you MUST have HardSPL INSTALLED before you can install this ROM.
(and no i dont know if it works with the dollypro version, as i dont want a $700 brick)
Now back to the issue at hand, i have cleaned out the HTC ROM and removed / changed the following
AutoUpdate (as this will NEVER WORK)
Replaced .Net CF 2.0 with 3.5 (Massive Speed Improvement)
Removed the WelcomeCenter (no one uses it)
Removed the sample music
Tweaked the RAM allocation
Enabled HSUPA (disabled by default)
Enabled the usual SecurityProfiles (RAPI etc)
Removed that (gay) HTC startup jingle
Specs
Free RAM on first boot is 60MB
Free Storage is about 90MB
(and this is only the start of things to come!!)
A speed improvement by at least 30% (i reckon anyway)
Many thanks to the usual crew
cmonex, Olipro, bepe for his tools, pof, mrvanx, (and everyone else)
Download Link 1
Download Link 2
If you like our work
Please donate to the Elite Team
Click to expand...
Click to collapse
That was super-quick!
Downloading
RESPECT...
walshieau - Great work - Your a man of your word I'm downloading now.....
In one of the other threads where we've "exchanged" words you mentioned that you would cook in the Hex tweaks required to get bbconnect up and running for the diamond?
This would be great if you could......!!!! Or have you already included the change needed????
walshieau said:
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.
Click to expand...
Click to collapse
Blob8me said:
walshieau - Great work - Your a man of your word I'm downloading now.....
In one of the other threads where we've "exchanged" words you mentioned that you would cook in the Hex tweaks required to get bbconnect up and running for the diamond?
This would be great if you could......!!!! Or have you already included the change needed????
Click to expand...
Click to collapse
That would be great. I've moved away from MS Direct Push (because it's gay) - been using Intellisync for the past week and would also like to try my company's BB service to see which is best.
Woooeeeiii great job!!!!
RESPECT to you all!!!!
Nice work mate... good to see all the old hermes crew back in business!!
Thanks. Nice ROM, does seem to have more free memory.
Nice to see RSSHub was included in the EU ROM!
I dont want to sound stupid but what the heck is:
"Replaced .Net CF 2.0 with 3.5 (Massive Speed Improvement)"
Whats the difference other than speed, what does it do?
Thanks
Great work
But it's not so many changes, i''ll stick to the 1.35 original ...
Nadavi
hi all
in my BA changing the pagepool increase dramatclly the device performance.
does anyone know how much page pool the Diamond has?
http://forum.xda-developers.com/showthread.php?t=276630
Aviad
Interesting.
I just had blown off the dust of my Magician and ran Igo8 on that ... never seen a navigation-program RUN SO DARN FAST. It has I guess 25fps during navigation, where diamond has .. 4?
So, reading about the WM2003 performances in that topic ...
unfortunitally, after my kid bite my BA, I deleted all the files I had for the BA and I can't find the setoperator.bat file anymore anywhere in the network or XDA
it will be great if the gurus of this forum could check this point and maybe we all going to get a small rocket in our pockets
Is there any tool for viewing and changing the pagepool size for Diamond ROMs ???
adotan said:
hi all
in my BA changing the pagepool increase dramatclly the device performance.
does anyone know how much page pool the Diamond has?
http://forum.xda-developers.com/showthread.php?t=276630
Aviad
Click to expand...
Click to collapse
I think it has 12MB , Because in a config file when building rom , i found a entry called set_diamond_page12M=1 !!!
Yes. Def PP is 12 MB
I tryed to disable PP and got 123 mb of available RAM.
Then got a very cool device speed) but free memory was only about 55 mb on full rom. so that is useless trick)
mun_rus said:
Yes. Def PP is 12 MB
I tryed to disable PP and got 123 mb of available RAM.
Then got a very cool device speed) but free memory was only about 55 mb on full rom. so that is useless trick)
Click to expand...
Click to collapse
hi bro, i have one dumb question... where to disable that? while rom building or in registry
GPSSlovakia said:
Is there any tool for viewing and changing the pagepool size for Diamond ROMs ???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=323269
@ruffruff: download the tool and you'll get your answer.
^.^
adwinp said:
http://forum.xda-developers.com/showthread.php?t=323269
@ruffruff: download the tool and you'll get your answer.
^.^
Click to expand...
Click to collapse
Diamond has another mechanism of PP changing. So this tool wont work.
HI~mun_rus..how can change diamond PP?? THX
Hi!
Anybody succeeded to find the tool for changing pagepool size on Diamond ?
from what I remember while chaning the PP at BA ROMs
the change was done on the .nb file - even for the WM 6.1 versions
so it sound strange to me that the diamond has a diffrent window mechnism
mun_rus said:
Diamond has another mechanism of PP changing. So this tool wont work.
Click to expand...
Click to collapse
This tool works absolutely fine, i used the 1.93.405.1 rom (official uk) which had a 6mb pagepool, and now has a 0mb pagepool and runs like a rocket...
Try it, it definitely works, had no problems for the last 12 hours...
Amz
Changing PP to 0 is better?
I saw that the SpeedUP TOR Rom uses 64MB PP size and is supposed to be quite fast as well?
amzchhabra said:
This tool works absolutely fine, i used the 1.93.405.1 rom (official uk) which had a 6mb pagepool, and now has a 0mb pagepool and runs like a rocket...
Try it, it definitely works, had no problems for the last 12 hours...
Amz
Click to expand...
Click to collapse
PP set to 0 ??? Really?
TOR 2.0 has a dynamic PagePool (0mb), TOR 2.1 has a 64MB PagePool...
I am currently running 1.93.405.1 with NetCF 3.5 installed via CAB and made default using NetCFCfg.exe... I am running a 0mb PagePool and I have tweaked the rom using DiamondTweak 0.5 setting all TF3D and Performance Tweaks on "advised"
My phone feels superb, quick, stable, and the best bit about it is that it is OEM in appearance which is what I want!
I did run SPB Benchmark and to be honest the values I got were low, but I have never seen my Diamond run so smoothly, even with some of the "Premier Cooked" roms found in this forum...
Now if I can work out how to cook NetCF 3.5 into the rom it will be perfect!
Amz
amzchhabra said:
Now if I can work out how to cook NetCF 3.5 into the rom it will be perfect!
Amz
Click to expand...
Click to collapse
Just take a look here
http://forum.xda-developers.com/showthread.php?t=413782
and you'll find the answer
Good luck!
amzchhabra said:
This tool works absolutely fine, i used the 1.93.405.1 rom (official uk) which had a 6mb pagepool, and now has a 0mb pagepool and runs like a rocket...
Try it, it definitely works, had no problems for the last 12 hours...
Amz
Click to expand...
Click to collapse
but will this work with a cooked ROM? as some of the chefs apparently lock their ROMs.
I think it will only work on a ROM that is not protected.... Try Panosha 1.8
I noticed other Chef's are releasing ROM's with different page pools configured so you can try which one you like...
Using Panoshas 1.8 with PP set to 0mgbs
Speed is amazing, up till now no probs.
And again I dont run more than 2 progs at the time. Max 3.
Set to close with X.
well, i don't have a kingdom but i will give my everlasting thanks for the one who can help.
i am looking for a stable ROM for my I780, phone and PDA.
i need something without RealVGA so EFN and Vibrenza cannot work.
i tried:
1. i780MSHC3_UKENG
2. i780DXHD1_PDA
3. i780MirageDXHH1
4. i780_SNv5C3MD
5. i780DXHC4
at most of them after installing Seven (OWA push mail), language support (hebrew) and maybe SPB mobile shell they usually stop responding.
people are calling me and there is no answer, the device wont cold start, about 50% of booting after SR that are just stuck and i need to SR again or take out the battery, after a night charge there are about 40% of the times where the device is stuck and i need to SR.
i am looking for the original WWE ROM from sansung, even 6.0 is good - anything to get me working without SR 5 times a day.
i780 perfect device
Hmmm, have you ever thought of throwing it out of the window? ... Sorry, just kidding. I just flashed my device i780 with new rom hh5.. Never had a better phone.. possible to flash "not Real VGA" if you don´t want.
you mean "paint it blue and through to the sea"... (it's a sayin around here).
i haven't seen the HH5, where can i find it? is it the EFN version? if so - i could not find a way to remove the realVGA.
dvdscr said:
you mean "paint it blue and through to the sea"... (it's a sayin around here).
i haven't seen the HH5, where can i find it? is it the EFN version? if so - i could not find a way to remove the realVGA.
Click to expand...
Click to collapse
You can get the 128dpi version of EFN HH5 rom here
http://www.mediafire.com/?2x5zjft3jj0
maybe i don't understand but doesn't the 128 dpi from EFN has realvga 128dpi? if so - i cannot use it.
dvdscr said:
maybe i don't understand but doesn't the 128 dpi from EFN has realvga 128dpi? if so - i cannot use it.
Click to expand...
Click to collapse
I don't know why you can't use realvga, but the purpose of realvga is to convert the screen resolution from 128dpi to 96dpi, so the 128dpi is the original non realvga version.
i cannot use the realVGA since i have some software that cannot use it.
i will try to use the italian rom and see what happens.
The 128 dpi version doenst use realvga.. it only has 128 dpi files right.
I think you should try it, because realvga isnt installed on the 128 dpi.
what harm can it do, make a backup and try : )
Personnaly, I have a french i780 with the original rom + realvga & it works really well in 96 or 128 dpi ! no issue
Realvga only work on WM6 core, EFN 5X roms are based on WM6.1 core, so no Realvga inside, you should try it.
the problem is with the hebrew language enabler..
all middle eastern language enablers (arabic,hebrew etc..) mostly tend to crash cooked roms and make them non responsive although the phone part would be working..ie you would receive a call and not know even that the phone received it...
solution...
test carefully what software you use for localization..
so i would work with a rom that is not cooked.
where can i find WWE offical ROM?
Hi
For all users of P750,i cook this Rom in EN(Iam from Czech Republic).I have in a plane cook a lite and Full Rom.In this Rom works without problem HTC plugins and programs,i have tested: HTC Audio manager and Today plugin,HTC Task manager,HTC Home next works Xcpuscalar and TCPMP.In Vsbenchmark 07 i have about 150 points more than in Offic.rom and Sorg Base 0.09 rom.I Have 28/29mb free ram.
Screens:
Info in Czech and download links here: http://www.wmmania.cz/forum/viewtopic.php?p=374584
New V2 (PIN Code problem fix it): http://www.edisk.cz/stahni/26603/PegasusP.nb0_62.06MB.html
Nice one, will check it out.
Do you testing this rom?I haven´t any tester.I need tester
great job
Thank u I'm tired of the memory issue with the vga rom I hope your rom is very stable. I'm testing for u but promise me to keep working on it if it's necessary.I'll tell u what.
btw did u try to install manilla 2d on it ?
Have been running for week without any major issues, M2D works well although a tad slower than the last rom i had from PDAMobiz.
Only niggle has been propensity to drop in and out of E/3G/H, strange as I would have thought that was a radio issue although I have not seen it with other roms and have been in the same location.
A good rom that has not needed a soft reset for a while.
Just about to flash to JEromes latest and test that - cheers.
sauzer: I have tried cook a Manilla rom with the same OS build,but some parts of manila doesn´t work,but i can´t fix,I haven´t any new kitchen with some better OS build,i have tried OS Build 21009(SYS and XIP),but my kitchen isn´t compactilible with this.Im using beta 2 and for me is good,i haven´t found any bug and don´t do Hardreset
And yes if i have some new OS build for QVGA,i have been cooking next better rom.
PS:I hate VGA resolution on P750,because i have 64mb of ram memory on 2.6 display is nonsense have VGA,and i have a most aplicacions for QVGA resolution.
thompson you really kick ass
This is the best rom I've ever tried it is fantastic the speed is incredible.
I never had any hang up even using opera 9.5 couldn't freeze my pda.
I have successfully installed manilla 2d and it looks great. I swear to god I was about to throw this **** and buy a different device. Thanks to you thompson I really can appreciate my asus p750.
every time I soft reset I'm impressed by the boot time, the memory is huge compared to before and it is not draining.
the only inconveniences are the Cyrillic keyboard and some Russian text(dialing rules).
Is there anyway I can use English layout for the keyboard as the default layout?
I'll keep posting if I discover something else.
many thanks
?I have in plane delete the russian keybord and give in rom Fingerkeyboard and so much better T9
I Have a new rom with OS build 21042, but i haven´t P750, can anyone test it?
Thompson111 said:
I Have a new rom with OS build 21042, but i haven´t P750, can anyone test it?
Click to expand...
Click to collapse
Is this ROM WWE? If yes - I can test it
Yeah is WWE, im from Czech republic and i make only WWE roms, roms in RU is for me nothing.I must Rom upload, and please add to your post some screens, thanks.
Rom for testing: http://www.edisk.cz/stahni/89630/PegasusP.nb0_58.78MB.html
OK. Downloading.
Some short experience?
OK. I think You use Barin WWE Kitchen from asusmobile.ru - I see same bugs with dial pad which I wrote on his topic - no buttons on PIN input screen and dialpad. How fix - don't now
I don´t use Pin codeI test it, how i have P750 at home...for me is not important.
I found what wrong - in SYS missing packet Phone_dpi_96_resh_240_resv_320.
If you add this packet from any kitchen - it's be OK!
Ok, thanks, i will repair.
New Rom: http://www.edisk.cz/stahni/26603/PegasusP.nb0_62.06MB.html
Thompson111 said:
New Rom: http://www.edisk.cz/stahni/26603/PegasusP.nb0_62.06MB.html
Click to expand...
Click to collapse
rom stable thank you very much. chat messages not alone. How can we do chat messages?
WM6.5 V3.00.707.50 - HTC TRINITY
CE OS 5.2.21231 Build 21231.5.0.1
ROM WM6.5 V50
link :-
http://rapidshare.com/files/233251358/TRIN_WM6.5__3_00_707_50__B21231.rar
pass :- PhamQuang
Thanks to PhamQuang , its agood rom
downloading
Will try it over the weekend. Will be a hard one to beat Chanvi's 21501... but worth trying as there is no other WM6.5 to test currently...
BigE
Dynamic page pool, only 19M free RAM
First impression- it seems this rom has a page pool set to zero. Although the phone is amazingly fast, It has only 20M free RAM initially, without trying to install anything. Also- the memory vary down to 16M from time to time without any open app. SKTOOLS makes it 21M but it is too low for my needs. I have changed PP to be 2M and will re-flash and report.
Besides that, from 4 minutes playing with it, very nice look and feel. Will keep posting results soon.
BigE
Great ROM but not for me
So sorry to say that, but I can't have a use of this rom. i love everything about it, really, It is well cooked, with everything i need and very little to add.
But it has too much RAM occupied all the time. I tried canceling tasks and gain memory and it does not get enough free RAM for me. To begin with only 48M RAm are available (Chanvi gets 51M) and about 65%-66% is taken at all times without any plugin. iGO will not run properly with less than 20M RAM free. I am short 4-5M to be happy, so although i really think it is one hack of a rom, I can't use it for my needs.
If you don't need memory like i am- I recommend it. Best SIP/Keyboard and GUI I have seen up to date... just memory kills me.
BigE
nice feedback bigE!
very informative
Last V49 was good and I believe that this one is good too. I am against mixing of Manila2D and Titanium especially for Trinity. We need as much free RAM and Storage as we can get. So there is no need to have two interfaces. I tried to contact PhamQuang but without any success so am asking you people especially you arnooo to try to arrange with PhamQuang to cook Titanium only ROM.
Thanks.
Guys, if you want to have a lot of free RAM, my advice is stop using Manila2D or TF3D especially on WM 6.5!
The rom has a bug "RING TONE" - This ring tone file is corrupted or unavaible please choose a different ring tone .. the ring tone are all corruped
malamen123 said:
The rom has a bug "RING TONE" - This ring tone file is corrupted or unavaible please choose a different ring tone .. the ring tone are all corruped
Click to expand...
Click to collapse
cool nathing wrong , no bugs . the file running smoothly . cross check again .
Ring tone file is "corrupted" I reinstall again and still same!
RAM
tomme45i said:
Guys, if you want to have a lot of free RAM, my advice is stop using Manila2D or TF3D especially on WM 6.5!
Click to expand...
Click to collapse
Ahhh, great advice. I don't use CHome, M2D and SPB when I need RAM freed. I turn today plugins off when I need memory yet even as 'naked' this rom is about 10M short of memory. Chanvi has cooked some better memory sensitive roms than that. However- as far as GUI and beauty, I like this one better. So in the matter of chosing between beauty and memory, alas, I chose Chanvi's.
There is no one Oz. of criticism here. Just an opinion.
BigE
This is a great rom I have had a good play with quite a few now and this one seems to be the better one as far as speed. I had a few problems with getting tomtom 7.9 to work but over come these all ok now.
GREAT WORK.
I tried to install this rom from as much as 4 different computers running XP and Vista, and could not flash. Every time the RUU gives me the Error 200 saying I must update the flashing tool. I tried the same ROM image with different RUU versions and none of them seems to work.
Am I missing something??
Thanks!!
egster said:
I tried to install this rom from as much as 4 different computers running XP and Vista, and could not flash. Every time the RUU gives me the Error 200 saying I must update the flashing tool. I tried the same ROM image with different RUU versions and none of them seems to work.
Am I missing something??
Thanks!!
Click to expand...
Click to collapse
Probably a corrupt download? Just guessing...
SuperSport said:
Probably a corrupt download? Just guessing...
Click to expand...
Click to collapse
downloaded it twice from different pc-s, different networks must be something else
It works grat. I really like the look, and it's really fast. Only problem is that it eats too much memory. I hope newer version will be bit more optimized.
egster said:
downloaded it twice from different pc-s, different networks must be something else
Click to expand...
Click to collapse
Do you have SPL and radio rom updated. Try this link http://trinityguides.info , and try to update this first.
Do you have p3600 or p3600(I)? Very important!
This ROM is for P3600.
Regards,
Pozdrav drug Slovenac
I am currently running an older version of WM6.5 and did all upgrades before with no problems at all.
Radio: 1.56.70.11
SPL: SPR-1.20.Olipro
Thanks!
Pa pozdrav nazaj
Maybe something happened with that SPL. The last thing that I can suggest to you is to try to flash the HARD SPL again. Im using Des' Crash-Proof SPL and I think that I also had a problem with the Olipro.
Do you flashing from the three color screen or from the booted device?
Tried both, from bootloader and booted device :S I will now try to install this Hard-SPL you suggested and the new V51 rom