We have SIP server located in LAN in office, I want to register to it using wi-fi. Fring does not work on my HTC P3300. It just crashes my mobile then need a restart only by removing battery, so not useful at all. I have tried SIP client on nokia N95 and worked fine. Need similar kind of SIP client for HTC P3300.
any clue guyss....
I've used fring, wengo and other VoIP applications (including modded driver to work integrated VoIP) and they work good...
The real problem is in WiFi that doesn't work in stand-by and in using external loudspeaker.
are u using fring on HTC P3300?.. if yes, why it is crashing my phone and not yours
arinjayw said:
are u using fring on HTC P3300?.. if yes, why it is crashing my phone and not yours
Click to expand...
Click to collapse
I don't know, I've a P3300 with WinMobile6.1 (19702.1.0.2) ita and .NET3.5
Are you sure you have not installed other applications that conflict with fring?
cesconoa said:
I don't know, I've a P3300 with WinMobile6.1 (19702.1.0.2) ita and .NET3.5
Are you sure you have not installed other applications that conflict with fring?
Click to expand...
Click to collapse
I tried by hard resetting the phone as well.. and its WM6
first of all i want to know does fring supports SIP settings if SIP server is located in local LAN
arinjayw said:
I tried by hard resetting the phone as well.. and its WM6
first of all i want to know does fring supports SIP settings if SIP server is located in local LAN
Click to expand...
Click to collapse
I don't think is a problem if SIP server is in lan or in wan, the difference is only in setting the right IP for the server...
If the server is standard, the port you use is 5060...
I use Skype for low cpu, and it work very well with the original headset of P3300. I connect to internet through ADSL wifi in my house.
the setup is different here. i do not want to use it for personal use. Its in the office, where we have IP phones for everyone. SIp server is in LAN where we register and make internal and external calls.
I was not have .net 3.5.. will install it and try
Sorry, but I didn't understand the problem of which you discussed
I understood it after rereading the posts, but I never use a client for SIP server for VOIP calls.
SIP server is located in LAN, so there is no need to dial out anywhere in the internet. I require a SIP cleint which can allow me to insert my user credentials and locala SIP server IP address, Just like N95 SIP client if u know. frng and other softwares routes SIP info from internet to the SIP server but for that SIP server has to be located to internet which is not the case in here.
my credentials wud be something like this
un: xxx
pw: xxx
SIP server: [email protected]
port: 5060
registrar/proxy: 192.168.x.x (optional)
this is to register to SIP server from PDA. After this i wud require a simple cleint to dial.. thats all
Related
I'm using Black v2.0.2. However, I've had this problem with all the WM6 ROMS. In WM5, I was able to connect to the internet through Activesync and sync the weather, news, etc. etc. With the new ROMs, I can no longer do it.
The older versions of Activesync had an option of entering the proxy server info in. Version 4.5 does not any longer. Or at least I can't find it anywhere.
My work proxy server is inetproxy2.home.net. I also believe it is port 80. How do I configure my Hermes to sync all the data with the internet connection through my work rather than connecting to GPRS eventhough I'm already connected to activesync?
Thanks for any help.
Default port
Try port 8080. That's the default port number for most proxy servers.
anubus12 said:
I'm using Black v2.0.2. However, I've had this problem with all the WM6 ROMS. In WM5, I was able to connect to the internet through Activesync and sync the weather, news, etc. etc. With the new ROMs, I can no longer do it.
The older versions of Activesync had an option of entering the proxy server info in. Version 4.5 does not any longer. Or at least I can't find it anywhere.
My work proxy server is inetproxy2.home.net. I also believe it is port 80. How do I configure my Hermes to sync all the data with the internet connection through my work rather than connecting to GPRS eventhough I'm already connected to activesync?
Thanks for any help.
Click to expand...
Click to collapse
silverfox0214 said:
Try port 8080. That's the default port number for most proxy servers.
Click to expand...
Click to collapse
Where do I enter the proxy information? Do I choose a profile or create a new profile on the Hermes?
anubus12 said:
Where do I enter the proxy information? Do I choose a profile or create a new profile on the Hermes?
Click to expand...
Click to collapse
if the proxy information is inserted into Internet Explorer on your machine ActiveSync will use this and overwrite the proxy configuration on the current enabled/active connection in Connection Manager... but for passthrough to work you have to have a profile setup in activesync....
walshieau said:
if the proxy information is inserted into Internet Explorer on your machine ActiveSync will use this and overwrite the proxy configuration on the current enabled/active connection in Connection Manager... but for passthrough to work you have to have a profile setup in activesync....
Click to expand...
Click to collapse
But where in activesync do I put in the proxy server info? I can't find that option anywhere.
anubus12 said:
But where in activesync do I put in the proxy server info? I can't find that option anywhere.
Click to expand...
Click to collapse
as i said in my post... activesync gets this information straight from your Internet Explorer settings on your PC...
Folks,
I have problem with my hermes to use VoIP. 5060 port is blocked in my office(WiFi).
Strange thing is, my pc application(VoIP client software) connects without any problem. It says "You connected to the Voipbuster service using TCP". If I check use port 5060 in my pc application to connect to sip server, it acts same as my hermes.
Are there any ports or connection in VoIP since PC application connects?
Note: My hermes works perfectly in the other APs which are 5060 open.
Thanks in advance.
Voip sip - working
http://forum.xda-developers.com/showthread.php?p=6348469
Question answered, thread closing..
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
Hi Guy,
Mabey I am just too stupid but I can't get my Voice over IP using Schaps WM6 on a Tytn.
My Provider ist 1und1, in Shaps VoIp setting I enterd,
Prov Name: 1und1.de
User Acount: (My VoIp Number)
Password: Did it
Registrar Address: sip.1und1.de
Left the port as ist was
Proxy address: 1und1.de
Left the port,
So for the Uri addres it Says,
sipmy number)@sip.1und1.de
When I am at home on my Wifi the Home plug in says No Connection,
If I aktivate 3G it connects but I cannot place a Call.
On other Wifi's I use it does not work eighther,
What can I do to Make it work?
Thx,
Chris
No one with any Help?
Is there any Obvious errors in My setup?
Is there A program I can use instead?
Grüsse,
Chris
VoIP error
Hi SchillDie, regarding your VoIP error, I think is quite difficult to make it work on WM6. I'm using pfingo to configure my Dopod 838 Pro still no luck till now. I've give up on that. Only nokia works well in internet phone & is very clear. I was impress by it's conversation. Anyway good luck in your VoIP.
I have created a new Windows Mobile application to wake up hosts in a network or over the Internet. Your networkcard and/or PC must support AMD's Wake-On-Lan (WOL), most networkcards and PC's do support this nowadays.
Features
Use Win32 Sense SDK.
Sources files available!
Stores hostname, MAC address and port number using registry.
Wakes up a host in a local area network (LAN) or in a remote area network (WAN)
Support for all screen resolutions
Requirements
A Windows Mobile 6 Smartphone or PocketPC device with access to WAN (wifi/3G/GPRS...)
Computers in your network that support Wake-On-Lan
Change log
V1.3
Uses the latest Manila's SDK V1.3 which improve speed and landscape compatibility
Correct a bug when using WIFI
Add some informations (IP of device & resolved host)
"
Hi,
anything like it exist already.
http://forum.xda-developers.com/showthread.php?t=695524
with friendly greet
starbase64
Thank you, I hadn't seen this program before... However, there are some differences as the use of the win32 SDK and the availability of sources.
I hope someone will find the sources usefull
I really need this.. and have no idea what to do. unfortunately, i can't forward a port for a broadcast address in my LinkSys WRT160N.
anyone knows how to set this up?
Set up LinkSys
Hi,
Try to setup your router without the broadcast, sometimes it works... For example, if your PC's IP is 192.168.0.10 and your extern LinkSys's IP is 80.32.3.4, try to set up your router like this :
UDP forwarding:
in port: 12345 for example (you can use any number below 65535)
out IP: 192.168.0.10
out port: 9 (or 7 depands of your hardware)
Then in my app, the host IP will be 80.32.3.4 and the port 12345...
I hope it will be OK...
which app works best?? because there is 2 of these circling around these forums.. and i'm going to use the best one... which is more user friendly? and has the least amount of router input work?? either that... or will the op be so kind and kinda hold my hand and walk me through it via PM?? i will gladly sport your appication
The other application can save the configuration of multiple computers while mine only records one...
Also, mine is not based on dotNET so is slightly faster...
@nir36:
You could also try to use a smaller subnet/range. My router won't allow to forward a port to 192.168.0.255, but I changed the subnet mask to 255.255.255.224 and so the range is from 192.168.0.1 to 192.168.0.30 with 192.168.0.31 being the broadcast address for that range and which I can forward the needed port to.
You can use a subnet calculator if you need more or different IP addresses (do a search for subnet masks on google)
@ProjektFuze:
Least router input work ?? You have to setup your router/computer the same, the program just takes the public IP address, MAC address and port and sends a packet which is the same for both.
I would say WOL everywhere is more complete but this app here is more straightforward if you need it for only one computer...
Thanks for sharing!
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Pain123 said:
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Click to expand...
Click to collapse
It should work with 3G... It's probably a router problem !
When using 3g, the IP you set in my app must be a public IP (not 192.168.X.X) and if you have a router, you should tell him to route the packet to your local IP...
If you don't understand (English is not my native language), tell me more about your problem.
Hi!
It is not a router problem, my HD2 cannot even connect to internet in the program, and by an app in android it works perfectly so it is not in my router or computer... Can it by some issue with my rom?
Artemis 31,5
WM 6.5 23576.5.5.0
Manila 2.5.20183025.0
Radio 2.10.50.26
/Andreas
Strange...
When you are allready connected to internet, is the button enabled ?
I have a friend which have an HD2, I will try with his device and post here tomorow... Maybe another application prevents the connection...
I've tested my app on the HD2, and no problems...
My app should show your IP when connection is found. Try to:
-unconnect from 3G and launch wakeonwan. My app will normally trying to connect using 3G. Is this step OK?
-Connect your phone and launch wakeonwan. My app will normally trying to find your IP. Is this step OK?
No, neither works! It only say "Cant connect to internet"! It´s only on Wifi it connects... :-S
Ok, I will try to change the connection process and update it...
To understand the problem, what is the real message printed ?
Can't establish connection to web...
Can't find web connections...
Can't retrieve available connections...
Can't find your IP address...
An other question: is the app searching for a connection or the message is directly printed?
Thank's
Ok, can you try this version ?
remplace the old .exe with this version in /program files/WakeOnWan/
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Pain123 said:
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Click to expand...
Click to collapse
OK, I'm waiting for feedback