Hi guys this is a tough one
I just bought a BA and it doesnt go past the start up screen - the touch doesnt work at all- I swapped it for a new lcd and touchscreen - no result, I upgraded to several different ROMS - no change
Anyone have any ideas of how to fix it?
Kind regards John
OK well some progress - sort of
When I take the battery out and leave it for a while and put the battery back in it works for a while then stops working the touchscreen again - tried it a couple of times and same result - weird anybody have any clues?
Ok guys for future reference in case anybody else has a similar problem The 2s was dead with no touch screen response but running fine on the buttons and synch and I tried updating the screen and touchscreen again initally no result then I decided to put a new 6.1 ROM on it and the response was there but flakey - I pulled the battery and left it alone for a day and hard reset it and Bobs your uncle away she went - fully functional.
Kind regards
John P
Related
Hey guys, hoping you can help me with a problem with my harrier.
It was was working perfectly fine, and I replaced the touch screen (original screen was cracked) and it seemed to be working perfectly fine.
However one time, the battery fell out, and when i put it back (and ever since then) it showed the Pocket PC 2003 startup screen, and won't go any further then that.
Reseting didnt work, so I tried discharging the internal battery (by leaving the the battery off it for several hours), and then charging up the battery and charging up the internal battery.
That broke the cycle, now it showed the Welcome to Pocket PC, please touch the screen to continue - however touching the screen did not have any response. I tried hard reseting, and what do you know, back to the boot up screen only cycle.
Another thing, the boot up screen as soon as you turn it on, and then you can't turn it off and it's completely unresponsive.
I thought it's possible there was a loose connection inside, from when i took it apart, but i took it apart again and plugged everything in again, but it's still doing the same thing ~_~.
Does anyone have any ideas whatsoever?
Thanks!
Willuknight said:
Hey guys, hoping you can help me with a problem with my harrier.
It was was working perfectly fine, and I replaced the touch screen (original screen was cracked) and it seemed to be working perfectly fine.
However one time, the battery fell out, and when i put it back (and ever since then) it showed the Pocket PC 2003 startup screen, and won't go any further then that.
Reseting didnt work, so I tried discharging the internal battery (by leaving the the battery off it for several hours), and then charging up the battery and charging up the internal battery.
That broke the cycle, now it showed the Welcome to Pocket PC, please touch the screen to continue - however touching the screen did not have any response. I tried hard reseting, and what do you know, back to the boot up screen only cycle.
Another thing, the boot up screen as soon as you turn it on, and then you can't turn it off and it's completely unresponsive.
I thought it's possible there was a loose connection inside, from when i took it apart, but i took it apart again and plugged everything in again, but it's still doing the same thing ~_~.
Does anyone have any ideas whatsoever?
Thanks!
Click to expand...
Click to collapse
you could try flashing it back to 2003 use a shipped rom you ma still be able to download one from the service providers site or from the ftp read the ba wiki good luck
swampy395
yes!!!
Willuknight said:
Hey guys, hoping you can help me with a problem with my harrier.
It was was working perfectly fine, and I replaced the touch screen (original screen was cracked) and it seemed to be working perfectly fine.
However one time, the battery fell out, and when i put it back (and ever since then) it showed the Pocket PC 2003 startup screen, and won't go any further then that.
Reseting didnt work, so I tried discharging the internal battery (by leaving the the battery off it for several hours), and then charging up the battery and charging up the internal battery.
That broke the cycle, now it showed the Welcome to Pocket PC, please touch the screen to continue - however touching the screen did not have any response. I tried hard reseting, and what do you know, back to the boot up screen only cycle.
Another thing, the boot up screen as soon as you turn it on, and then you can't turn it off and it's completely unresponsive.
I thought it's possible there was a loose connection inside, from when i took it apart, but i took it apart again and plugged everything in again, but it's still doing the same thing ~_~.
Does anyone have any ideas whatsoever?
Thanks!
Click to expand...
Click to collapse
Soft reset to your BA, before the red software letters appear in the splash screen push camera and record buttons simultaneosly , if you do correctly simultaneosly three labels gonna appear, with camera and record buttons you can choose the labels and set "yes or no". set all to "yes" exept KITL, after do it press message button and your BA begin to boot, dont afraid for the white screen it take a moment
did you sort it? - I have been through this exactly. Pressing the camera and record buttons does not do anything in wm2003 and there is almost no delay before the boot screen appears.
I reflashed mine with ship roms and in all cases the BA froze at exctly the same place. Amazingly enough I fixed it by letting the internal backup battery go completely flat (took the main battery out for a few days), flashed with fresh ship rom and all was fine. Even works great with WM6.1
Worth a try, I tried so many things and none of them worked I was going to throw it in the bin, amazing how easy the fix was.
thanks for the replies.
Currently trying to find a rom for a CDMA blue angel.
Try this post, it does work on Vista.
I know that it is an o2 rom but will be fine then follow the steps to upgrade as before
Try this link
http://forum.xda-developers.com/showthread.php?t=281959
Hi I'm new to this whole PDA phone thing but I got a HTC 8525 and got it unlocked it worked fine for a while then one day I was trying to run the pocketGBA emulator when my screen went blank(all the colour faded away then the entire screen just went blank). I took it to get repaired and the software end of things are fine and the hardware end is working fine but for some odd reason the screen just lights up and is completly blank. Even stranger is that sometimes the screen is totally fine and has no problems. Can anybody help me with this weird problem??? Note the screen is not broken.
Hi!
Probably You have a bad flex cable and it's required to be changed. Sometimes it happens so of to much qwerty keyboard opening and closing.
hi,
I resolved same problem than yours with this tuto
http://forum.xda-developers.com/showthread.php?t=321163
good luck
Hi, I have a problem with my XDA Orbit. It works fine for some period of time and then starts hanging up. Usually before the phone hangs, the batery status on the today screen dissapears. I have tried hard reset and different ROM instalation. After a new ROM is installed it works fine for a day or two and then starts hanging. After a soft reset works for 1-2 hours. Sometimes needs several soft recets to start. Any ideas? I was suspecting a faulty phone, but after a ROM update it works so fine!!!
P.S. I have tested several ROMs but never tried to go back to the original one.
Hi
How much memory do you have before the phone crashes.
Are you changing any of the advanced settings for the file system and glyph caches. Both of these will use up alot of memory and would causes phone chrashes similar to what you have.
have you tried Toms new oops Black v1.0 on a 4mb page pool. This alone would give you a little over 1/2 memory free and then in the advanced settings making sure that the caches are set to file as 4mb and glyph to either 16 or 32k
Cheers Dave
disem said:
Hi, I have a problem with my XDA Orbit. It works fine for some period of time and then starts hanging up. Usually before the phone hangs, the batery status on the today screen dissapears. I have tried hard reset and different ROM instalation. After a new ROM is installed it works fine for a day or two and then starts hanging. After a soft reset works for 1-2 hours. Sometimes needs several soft recets to start. Any ideas? I was suspecting a faulty phone, but after a ROM update it works so fine!!!
P.S. I have tested several ROMs but never tried to go back to the original one.
Click to expand...
Click to collapse
i found that the original rom had issue with o2's today plugin
soon as i disabled it the freezing and error messages stopped
I had the same problem with my origonal XDA, I returned it to O2 and they eventually gave me a new one, I think i killed the old one from over use haha
i had the same problems, my phone died today.
having the same problems changed rom loads of time but it will work for a while the the phone stops working followed by a white screen. i think my babe might bedead
Unfortunatelly it seems to be a hardware problem. I have tried all software reccomendations. Nothing works for more than a few hours. Then crashes again.
disem said:
Unfortunatelly it seems to be a hardware problem. I have tried all software reccomendations. Nothing works for more than a few hours. Then crashes again.
Click to expand...
Click to collapse
I thought the same...take the bugger back to where you got it from and get it replaced for a new one!
O2 did have two versions of this device, i only just noticed this but my first Orbit had a white tracker ball that glowed blue, about 3 months later i dropped it in a bath and got it replaced, only this one had a jet back tracker ball, i dont have version numbers or anything but it has changed at least once on the hardware side
you think battery status blew your processor/mainboard? you can't disable batterystatus? or put it back to original speed: 201 mhz?
what speed were you running? i'm running 247 mhz constantly.
good luck.
Orbit problems
Sounds like it could be your motherboard. I had a similar problem with my un-modded orbit where it would hang and stick sometimes as receiving a call and would constantly vibrate until I took the battery out as I couldnt turn it off it eventually died O2 repaired it under warranty. Sorry this post is a while after yours but hope its helpfull.
O2 hanging with white screen
Has any solution came up within last few days for 'O2 hanging with white screen' problem.
My phone recently started behaving like this.
Please help as phone is out of warranty now and cant claim the new set or something like that.
_
Murli
So, I left my Artemis in my RAM Aqua Box waterproof phone case attached to my motorcycle while I ran into the store.
I came out, started the bike and started the ride home. That was when I noticed the white screen and my tunes had stopped playing. I've seen it happen before (while turning off the phone in camera mode, etc), but a simple soft reset always fixed it. Not this time...
For two days now I've flashed it back to factory, installed my latest ROM (twice), reconfigured all my settings, etc, only to have the phone seize up by fading to the White Screen Of Death. The only fix is to remove the battery and let it sit for a bit. I have found however I can get the phone to run longer if I put it in the freezer for 15 mins, then it runs as it should until it warms up.
Sometimes it will work for half a day, other times it will fade out even before the soft reset boots up again. It really doesn't like being plugged in to charge or sync.
Now for some more background info. It did get deathly hot in the case I have because it has a clear face, is sealed, and it was sunny. Also, I started the bike when the phone was plugged in. I've heard this is bad for the charging circuit, but I'm leaning to the overheating as being the seminal event of the start of my sorrows because I've started the bike/truck many times with the phone plugged in. Did my luck run out?
What have I done, and how do I fix it?
i have had a white screen problem on my phone to it would go like this when just left on or when wanting to flash it in boot mode i have taken both sim card and memory card out and i have found that the memory care is curupted and works fine now will have to formate the memory card in order for it to work properly in the phone again
htc artimis 02 orbit
Yes, you can remove your memory card.
Just had similar problem. Possible reason: ROM update. Possible solution - ROM changed again (different) and hard reset. Hopefully everything will be ok. Until now (9 hours) - it is!
SCREEN
Hello
sorry i speak english a little.My TC P3300 have a problem on screen.I replace the lcd screen because the old make a hole white every 5 s.With the new its the same.What happen
thanks
I have the same Problem I started getting the White screen when i try and access anything it hangs and then goes white screen I removed the sd 2gb and left the sim in and id stil did the same thing but now i put the 4gb out of my laptop and now it seems to work but i still get the power on problem sumtimes
Im running wm 6.5 Arte_WM65_23009_WWE_Fixed_IE_b1
Any sugeustions? help plz
i have same problem
Even I was facing the same problem. I did hard reset couple if times and didn't find a solution. So finally I gave the phone to the service center and it seems now it's been fixed. I will ask the service guys about the actual problem and would post it here.
It may help someone.
Now I am going to try android on my phone, wish me luck.
Regards,
Rajesh
rajeshrr said:
Even I was facing the same problem. I did hard reset couple if times and didn't find a solution. So finally I gave the phone to the service center and it seems now it's been fixed. I will ask the service guys about the actual problem and would post it here.
It may help someone.
Now I am going to try android on my phone, wish me luck.
Regards,
Rajesh
Click to expand...
Click to collapse
Did U ask the service guy abt the screen problem
Hi,
can anyone help me plz? My Pda sometimes freezes and sometimes turns off and i need to take of the batery to turn on again.
Sorry but i'm noob in this stuff...
regards
Mine too
Mine too, in various moments (actions). During the phone call, typing SMS, receiving SMS etc just freezes, screen goes off (actually very dark gray) and can't do anything but to take battery out and back in and restart.
It was working fine till couple of weeks ago. Then I have tried S2U2 and some keyboard prog.
I have tried with hard reset but no luck.
Any suggestion?
Thanks in advance.
P.S. just found this:
http://forum.xda-developers.com/showthread.php?t=543194
Seems to me that replacing the battery could be the answer!!!
good luck rui_gaia
Edit on Okt 30, 2009
Seems to me that new battery doesn't help. Same thing again. Ugh!
Hi
I had similar pproblems on mine and it really turned out to be the battery.
Xtremerer said:
Hi
I had similar pproblems on mine and it really turned out to be the battery.
Click to expand...
Click to collapse
Thanks Xtremerer,
Today news:
I just got my Artemis from the service and the guy told me that I had two problems:
1. Software - he just did some kind of "repair" tool for services (not flashing)
2. Hardware - problem with mini USB connector on the bottom of the phone - he said - inspect your cables, one might be bad.
(3). Battery - I gave him the phone with the original battery although i have both the new one. He told me to change the battery, this one is bad, screen flickers because of it.
I was happy for couple of hours, but, it turned out that my WiFi doesn't work anymore
Any idea?