Hello
I have a peculiar problem with my Artemis (Xda Orbit). I have 2 situations, some times one, sometimes the other.
Situation 1: Plugging in the headset deosn't turn off the sound of the loudspeaker. I can hear through the headset but also through the loudspeaker. In this situation the sound plays about 5% faster that normal.
Situation 2: After having had the headset plugged in, the sound output is not restored to the loudspeaker when I plug it out, when playing with Media Player. It stays mute. I installed TCPMP (another player) and it is the same problem there. But when calling to the phone, the call signal plays well enough through the loudspeakers. I have a MP3 as ring sound (the same MP3 will not play through the loudspeakers when I unplug the headset). However, when picking up the phone, I can not hear the caller nor can they hear me, without the headset. Only a reset restores the sound to the loudspeakers and then I can also call normally. The Radio sometimes recognizes the headset, sometimes not. Once the sound was briefly back to the loudspeakers, as I was shutting down Media Player. I even tried a hard reset to fix these problems, to no avail.
This evening I have Situation 1 but this afternoon it was Situation 2.
There was a problem before, where the speaker would stay on during a normal call, like in hands-free mode. Perhaps the problem was there already. This problem went away by itself but did it really? I didn't use the headset for a while so...
I did two things recently that may have caused this. I did it at the same time, so I don't know which of the two that may have caused the problem, if any of them.
1 I used SDHC-Artemis.cab from Bepe, to be able to use a 8GB card. Worked fine.
2 I tried two adaters I had bought on ebay, which give sound out on a female mini-jack.
Can any of you super-gurus guess what the problem is?
i dont have a ready answer - but you might need to tell us more about your rom - do you have shipped or cooked? details pls.
All shipped. But like I mentioned, I did have the patch from Bepe installed. But I actually now think that the problem was there all along, right from the time I got it used a few months ago.
ARTEMIS (Xda Orbit): Windows Mobile 6.0
ROM: 3.4.207.2 GER
ROM Date: 4/18/07
Hope this helps
your situation 1 has happened to me before, why i dont really know but i felt a complete plonker sitting on the train with my ear phones on and my phone making one hell of a racket!
to fix it i did a soft rest an bam stopped, might hav something to do with plugging in headphones whilst audio coming out, thats about the only thing i may have done and since then ive not had any further problems.
i have since flashed to 6.1 as well that may have been it, i do sometimes get this odd audio error with the FM player, sometimes its very quiet and refuses to be more than a whisper, but if i turn the volume up and down using the hardware buttons it fixes its self.
Windows Bugs im guessing!
It does seem like a Windows bug. Although, once, by fiddling with the plug, the problem went away.
Resetting doesn't do it for me. I would love to flash to 6.1 but my current ROM has Tomtom Navigator built in, with support for the internal GPS and as far as I can read here and there, you can't install Tomtom over a new ROM and expect internal GPS recognition.
Somewhere in a thread I once read about someone who had a link to O2, the provider of the Xda here in Germany, with the 6.1 Update. I haven't been able to find it again, only the 6.0 update. Perhaps I remember wrong...
no worries there mate, ive installed Tomtom on several ROMs and all have worked with the internal GPS, on tt7 you set it as an internal GPS on COM 4 in my case with something like a 56000 rate, on tt6 i think it was called other NMEA or generic NMEA on com 4 56000
just be sure to copy all your favorites, i upgraded to tt7 and silly me lost them all!
Right on dazza! It works just like you said with Tomtom. Thanks mate.
I tried it on another Artemis. I probably have to send in the first one for repair, to see if there might be a hardware problem, before flashing anything, including the guarantie!
No problem mate, it could be hardware, but im sure it happend to me only because i plugged in the headhones whilst it was playing FM radio, perhaps i shorted a couple of pins or coursed it to glitch somehow, to be honest, it might have been just the wrong day of the year! however, im pretty sure that if you flashed the lastest official ROM from the website of your mobile phone provider it will overwrite the modded USPL and put the device back to an original state.....so if you fancy giving the new 6.1 ROM ago you can recover to standard ROM for an RMA if it makes no difference.
Aha, flashing back to normal... "pretty sure" sounds a bit like "not completely sure". I wonder about that and if those tech people who would repair the thing might find traces of the other ROM somehow. Besides, I don't know where to find the original ROM.
Come to think of it, I don't understand how you could have played radio without the headset plugged in. On mine it needs the headset to do anything, saying it needs it as antenna and if you unplug it, it will complain.
yeah it wont work without the hardphones in, but the program launched as i plugged it in.
the only reason i say pretty sure is because im a bit confused by the manual
When the USPL cracks came about there was a thread that said it would revert back to normal after an official flash but i cant find that any more, also the manual for USPL states that it will not survive a reflash, but im confused because on mine ive flashed several ROMS without redoing the USPL so it clearly does remain after a flash.
Did you take out insurance on it? you could always say your dropped it in the bath, they will send you a new one and take the old one at the same time. No need to worry about it then!
------------------------------------
No insurance.
Are you saying that the original ROM will permanently reside somewhere, no matter what you flash?
I found the official Xda Orbit ROM now:
http://rs177.rapidshare.com/files/56...88.90_Ship.rar
No, well yes, kinda..
Im not sure of all the tech lingo but there are several parts to an artemis, the ROM its self where the version of windows is installed, the Radio ROM for the wireless part and the SPL which is something like a boot ROM, used mostly by mobile operators to lock the phone to their software
to update a phone thats Locked, not sim locked thats something different, they developed a patch if you like, that kind of by passes it, so you install this USPL which stands for something im sure, which basicly then lets you flash what ever ROM you want,
if your phones locked you have to do this otherwise you could end up with a brick, ive only ever changed the USPL once and ive put several ROMS on it perhaps my phone is unlocked already so it makes no difference
Anyhow, to warrenty it, if you changed the USPL, you would have to re flash the original USPL and ROM back, BUT and this is why im unsure if flashing a new ROM would work, according to the manual for this USPL it says that you have to run the USLP patch everytime you want to change the ROM, which means that its not perminantly changed at all which means if you put a original ROM back on it, it should be back to stock default...
its a bit vague im afraid, most of the threads seem to have vanished, the poor artemis forum used to be a busy place.
Related
I know this topic has be address many many times and there are still no soluation to the problem.
So.. I want to make a poll to see how many user is experiencing this problem.
I hope to grather enough data to see if it is a hardware problem or Firmware problem so that i can address to O2 regarding this issue.
I love my PDA/phone.. but... this issuse really bugs me cos i used the phone for business and it always happens when a important call arrived... :evil:
Pls, Lets Vote with your honest answer...
Derek
No problems here....
What i've experienced is that sometimes the ringing sound is very quite even though the volume is at maximum. I make a soft reset and everything's back to normal.
NO SOUND
I have also experienced the same. I normally have to do a soft reset to fix the problem. Seems its a firmware issue to me.
One more issue is that we need to disable the power off system setting after 3minutes.
If not, a phone call will be automatically ended after 3 minutes talking.
i have also experienced this problem. i had a important caller call me twice and i didnt hear my phone ring. it was also next to me. luckily, i had my backup phone with me when he tried that line.
agreed that we shouldnt have to soft reset to get back the ring tone functionality. i personally think its a caller id version problem, but thats my opinion cause its easier to fix. i just hope it isnt a firmware problem since i wont hold my breathe on O2 releasing a rom upgrade in my phone version.
im going to try some reg tweaks to see if it will help, once my main pc is up and running (currently moving). i just dont want to go back to an older rom because of a ringing problem. but it IS a big problem for most of us.
ps. sorry about the spelling mistakes and punctuations. im on my pda at a coffee shop.
Yup I have see the no sould on outgoing, no sound on incoming, reset does the trick for me. Also feel that the sound is low in general (even if set to max)
Ha.. i call XDA today in their headoffice in Singapore. The CS guy told me.. they know this issue and say there will be a new (Rom) or patch release very soon.
After seeing the vote result. I believe that the issue is do to software, not hardware.
I have a firend that design such product. he told me that it could be that DSP script is not written well. He said, the Echo Cancelling must be overflow causing the unit to manufunction. and after reset, the overflow will be clear out, so the unit function again.
I hope O2 is really releasing a new patch to fix this issue. If not, i think i am force to go back to my Sony Ericsson P910i or one PDA and one phone option.
i'm glad that O2 recognises the problem and not passing it on to other people. thanks for the information rcbear. glad you took the extra steps get them looking this way.
i hope "soon" means in a waek or two.
same problem
My ringer always works but sometimes, at least every other day. When someone calls me i can not hear them, they can sort of hear me, but the earpiece is dead. A soft reset fix's this problem. Is my issue related to the current issue dicussed in this thread? Thanks
Jeff
I have the problem
But I get it seldom and sporadically.
pda2k (out of the box)
ROM: 1.22.00 WWE
Radio: 1.06.00
Protocol: 1337.38
ExtROM: 1.22.162 WWE
AT&T/Cingular
Re: same problem
jeffro01 said:
My ringer always works but sometimes, at least every other day. When someone calls me i can not hear them, they can sort of hear me, but the earpiece is dead. A soft reset fix's this problem. Is my issue related to the current issue dicussed in this thread? Thanks
Jeff
Click to expand...
Click to collapse
Hi Jeffro01..
Welcome to the club.. :lol:
Derek
I don't seem to have the ring volume problem, but my phone will get into a state where it rings, I answer the phone, but there is no audio. In the six or so times it's happened, I haven't really determined if the caller can hear me. A reboot fixes it.
I can't pin down any one thing I do to cause it to get into this state, but it seems like a software/firmware issue.
I have this problem too.
I had to send my BT headset for repair for two weeks and noticed it did not happen during that time while it started again since I got my BT back.
When it happens (once to twice a week) I soft reset my SPVM2000 and it then is ok.
Also the BT Orange Switzerland patch makes the problem appear less often.
Phone ring problem got me twice today...
Both times, never heard three calls, but the phone still reports them as being missed.
Gotta be a solution for this or I'll be soft resetting every time I finish a call/use.
I had to send my BT headset for repair for two weeks and noticed it did not happen during that time while it started again since I got my BT back.
Click to expand...
Click to collapse
If so I have 2 questions for everyone who has this issue:
1, Do you use a bluetooth headset or any other bluetooth device (gps...)?
2, What is your current bluetooth version and build?
I have Bluetooth build 3900, and I'm using 1.33.
No probleme here
not using BT or WiFi.
Where can I find my BT version?
I don't also have the 3 minutes switch off pb, the PDA function switch off after 3 minutes but the phone remains operational. I often switch the PDA off myself whilst on the phone to save on batteries.
...Hi everyone! (1st post!)...
I get the dead-speaker in calls too...
I took delivery of my first SPV M2000 a couple of weeks ago; it had a few problems, one of which was that the speaker would be dead occassionally when making or answering calls requiring a soft-reset to resolve. I initially thought this might be caused by the device not correctly recognising external hardware had become disconnected - handsfree/BT/car-cradle etc. - but it did seem to be at random.
Orange replaced the device last week; and by day 3 without using any handsfree/cradles etc. and BT and WiFi not even enabled (much less paired/connected); the dead-speaker problem reappeared.
I'm not going to bother chasing Orange about this issue on its own (this device doesn't exhibit any of the other problems I had with my first); as it seems to be a pretty common problem that's going to require a software update to fix. Needless to say when I read that HTC have written a fix I will be on Orange's back to make a fix for their ROMs public. (dreaming?).
Just FYI, both the initial device I was supplied and the replacement have the same software versions (in my sig).
Regards,
Rob.
I circumvented (temporally fixed) the ringtone problem by setting the default ringtone to "None", and also set the phone to vibrate. Then Re-enabled MS Voice Command to announce all incoming calls. The only problem is, the voice isn't loud enough in noisy places, but it does the job in the office or semi noisy environment. I guess this will have to do until a verified fix comes along our way.
I'm having the same problem for a week now...
I was on the street with my BA making calls and all went ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully:
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call.
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations ) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe :?- or if I got the battery off...
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks
come on, people, a little bit of help here Still making calls with my old Nokia
Out of interest... do you have any wisbar apps installed?
No wisbar apps installed. Thanks
I'm having the same problem. Most of the time this occurs the first time I use it in the morning. The other side can hear me, but I can't hear them. I softreset and it works again.
Yes, I've checked and there's lots of posts about this problem. It differs from mine in the sense that the other CAN hear you. In my case, nor I or the other part can hear us....
As you can read, I've done lots of soft-resets, now I have also 3 hard-resets with everything "at 0" (clear Registry Hive and format Storage). But the problem remains. The only thing I see I can do now is downgrade to wm2003 and see.......
Thanks for your answer.
mutho said:
I'm having the same problem. Most of the time this occurs the first time I use it in the morning. The other side can hear me, but I can't hear them. I softreset and it works again.
Click to expand...
Click to collapse
I've moved to the "BA upgrade, etc" forum. Please, help me from there!! Still looking for an answer
http://forum.xda-developers.com/viewtopic.php?t=44440
there is an issue with BT and this behaviour. Either you need to always have BT activated or once you have deactivated BT you need to reboot your device. I have the same problem myself.
Regards,
Fredrik
I upgraded to the new Orange ROM on my SPV M5000 (although with the radio 1.09) and even though I've now gone back (icons and taskbar were all messed up in VGA) to the Qtek (42.42.P8 1.13.64WWE this time with radio 1.09) the clock keeps reseting to midnight 1st august 2005 after every reset (eg a backup)
Very annoying. I've tried going back to radio 1.06 which I had before all this started. Anyone any idea what I can do about this? Where to start?
In fact it's not just the clock. Sound is dead too. I don't get anything from either the speakers or the headphone socket.
I've now tried complete original sets of roms ie the orginal Qtek and although the update progresses normally the clock consistently resets to 1st August, and I don't get any sound
Time to contact orange?
So the following isn't working:
On board sound (through speakers or wired headset)
Clock (ie everytime a reset occurs it goes back to Aug 2005)
Cameras
But the following are all working fine.
GPRS
3G
WiFi
Bluetooth (I even get sound through my bluetooth headset!)
I've flashed a few different roms and radio sets but what is/isn't working remains the same. Is there something about this spread of working/not working which can help narrow down the problem?
Someone please post something!
sorry mate, cant help, i dont have that problem.
personally, i would have done without the vga and stayed with the newer update.
just thought i would let you know people are reading, but if doesnt look like many if any are having this problem.
oh well, its now popped back up the list for you...
Sorry I should have been clearer. All this started when I put the new orange rom on my SPV M5000.
The clock has been bust since then, and even going back to the qtek rom I used to use hasn't fixed the problems.
Think I'll have a look at running linux on it (may help with diagnostics) if not I'll stick to the new orange rom and contact orange for support.
Broken Clock - Fixed
Just incase anyone is curious (ever has the same problem) this was "fixed" when I accidentally dropped my device again! Yes the answer is that this had nothing to do with Rom updates. There must just be a loose connection somewhere and a bit of a jolt has sorted it out!
Phew...but a big worrying that something is loose somewhere.
Hi guys! I have a really big problem. Im using a Loox T830 with a custom wm 6.1 rom. Last friday suddenly my pda"s speaker stopped working, but not fully. There were no system sounds, no new text message sound, I didn"t hear the music playing, etc. The only sound from the pda was the incoming call (ringtone) sound, but I didn"t hear the one who called me talking to me. And he didn"t hear me neither. But I heared everything with the headphones plugged in (didn"t try phone call), so I tought the problem will be the speaker. Anyway, I did a hard reset. After that I heard everything from the pda"s speaker normally, till today. Now the situation is the same, except one thing... The hard reset not fixed the problem again I can hear the ringtone, but nothing else, only with the headphones. I did 3 hard resets, but still not working I don"t know what to do, I think it"s not the speaker"s fault. And something interesting: I"ve installed a tv tuner card on my computer 2 weeks ago. Something is wrong with it"s software, cuz every time I start it, I have to re set the sound settins. And as far as I can rember, my T830 was being synced last time I changed my tv card"s settings. This happend today too, the pda was being synced, and I wanted to watch tv, so I changed the tv card"s settings. And I think there were no sounds on my device after that. Is this important? I mean maybe this is the problem? But why hard reset not working? Im lost without my pda working 100%. If anyone have any idea,please help me! Thanks in advance!
I flashed back the original wm5, but no sounds
If you've got the original state of your phone back, talk to your the support of FujitsuSiemens..If you've got warranty....
chucknican said:
If you've got the original state of your phone back, talk to your the support of FujitsuSiemens..If you've got warranty....
Click to expand...
Click to collapse
I did, but the warranty was for a year, and it's expired on dec 20. 2008 I would like to wait before i have to take it to the service, maybe there is something i can do to fix it.
Problem solved
It isn't a perfect phone. I've had it crash 3 times after having it for 10 days. It's the same type of crash too, the screen just becomes nonfunctional and I have to pull the battery out to restart the device. The phone does not freeze, the time and incoming calls all work, but I just cannot accept any calls or dial or do anything with the touch screen because it refuses to listen Not sure why it happens but I'm curious to see if people have had this kind of problem and or know of a resolution.
Thanks!!!
What ROM do you have, any software you've installed on it?
Andehh said:
What ROM do you have, any software you've installed on it?
Click to expand...
Click to collapse
Stock T-Mobile rom. I have installed several games and the FM Radio cab, that is all
i think it is not a hardware problem it must be because of something u loaded.try a hard reset. i have t mobile tp2 no problem. i have loaded volpad application, lots of bugs happened. after removing everything was ok. remove one by one and after each make a soft reset. u will solve it. good luck...
I had the exact same problem. My device would think off and on that I had my headphones plugged into it because the headphone icon would appear. Therefore I couldn't hear anything. I finally took my phone to Sprint and they replace it with a new one. They must all have a defect or something. I tried the soft reset, hard reset, and wiping the device. Nothing worked. Not even tech support could figure it out (which isn't surprising, but whatever).
my tmobile tp2
id give it a hard reset and see whats up, some games can lock up ya phone, like the game majong... thats mess my wifes phone up and freeze it if ya dont exit properly.....
Im now on custom shipped 6.5 and my signal keeps switching edge to 3g annd back, so Now im on figuring this out, fun sometimes huh????lol
Thank you all very much for replying to my thread.
I have decided to load a custom 6.5 rom to my device and everything so far is working wonderfully.
I am using http://thewingster.com/athineoschometf3d.aspx with the latest T-Mobile Touch Pro 2 Radio ROM