Develop Bugs

Greeting oh clever ones | mun's Rom question

Hi People
First off, want to say hi, really looks like a nice community here, and hoping to be a human sponge and soak up all I can from you
Hopefully be able to contribute at some point in time.
I got a SPV m700 (Trinity) from Orange, and using my T-mobile sim card in it, after installing mun's ROM update.
Just wanted to know - does the INTERNAL gps still work, as I can only see the external GPS setting.
Will be loadin up TomTom as soon as I get a memory card.
Any other suggestions from you guys - that has experience with t-mobile settings for this phone?
cheers!!

You'll be fine.
Don't mess with any of the GPS settings, and when you install TomTom set it up as follows:
Other NMEA receiver
Com 9 Baud 115200

Cheers buddy.
I went thought the massive thread (tried to anyways) and could get a straight answer if it's still enabled or not.
Thanks

With tomtom, just use the Built in GPS setting.

soopahfly said:
With tomtom, just use the Built in GPS setting.
Click to expand...
Click to collapse
Sweet - like these kind of answers
"JUST leave it alone"

Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me

sup3rc0w said:
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
Click to expand...
Click to collapse
It' in NeilM's third post (look for 'try this')!

Jazza said:
It' in NeilM's third post (look for 'try this')!
Click to expand...
Click to collapse
GAH - I'm going blind!
Thank mate - can't believe I missed that

Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?

i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.

pinkllama said:
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
Click to expand...
Click to collapse
You're the man.
I knew p[osting here will be a good idea

sup3rc0w said:
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
Click to expand...
Click to collapse
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.

Windoze9t8 said:
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Click to expand...
Click to collapse
There is no cab file, only a setup.xml

sup3rc0w said:
There is no cab file, only a setup.xml
Click to expand...
Click to collapse
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works

Windoze9t8 said:
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Click to expand...
Click to collapse
Cheers dude - second link works just fine, first one is just a bunch of XML files for some reason
Might have something to do about work blokcing it - but I doubt it.

Just caught up on this thread- sorry!
Glad you now have the HTC HomePlug- I've just tried the download from our site, and it worked fine, so maybe a config problem on the PC you were using?
If you haven't already, just copy the cab file to the PPC, then locate it with Pocket File Explorer, and tap it to install.
Now go to Settings/Today/Items and put a checkmark against it, and uncheck other plugins you don't need, and voila !

keyborad mapping while in call FIX

This will allow you to type normally while in a call, without the numbers being locked on in other applications. I could not find this anywhere so I did so tinkering and found this key to be the problem. I saw many other people that had the same problem here is the fix. Quite simple.
Just change the following key.
\ HKLM\Software\OEM\PhoneSetting\
“enablekeyboardmaping” to 1
Update. this fix is not currently working

Wow nice tips!
Was wondering how to get rid of this in my rom.
This was very helpfull
EDIT: Didn't worked for me. Tried some different typo but still no luck :/

fun_key said:
Wow nice tips!
Was wondering how to get rid of this in my rom.
This was very helpfull
Click to expand...
Click to collapse
no problem, thought I had to share it would only be fair.

thepcguy85 said:
no problem, thought I had to share it would only be fair.
Click to expand...
Click to collapse
Can you maybe elaborate a bit more you tweak? I am maybe missing something

Nope, this is not working
Either 1 or 0, DWORD value

oh man.. are we close to finding a fix?!?

this worked for me. I am running
WM6 5.2.1620 build 18125.0.4.2
ROM 3.61.502.1
the AT&T version
after I changed this it worked right away no reset needed

post a cab please

i dont see this in the reg at all.....

Might have to create it.
It's already built into the ROM im using so I can't check.

before i changed this key it did not work after i changed it it did. so i just changed it back and the numbers didnt come up. i will post the other keyboard cab i found as soon as i can.
i thought i had it
i will also try setting to 0 and soft rebooting just to make sure.

mcorrie1121 said:
Might have to create it.
It's already built into the ROM im using so I can't check.
Click to expand...
Click to collapse
Can you re-confirm the key, sans typos (no offence thepcguy85 )

after reboot the keys did not revert back. so now i am puzzled, l also loaded this cab with keyboard mapping. please note this cab is only for the AT&T 8525. but i am not sure if it was this cab or not.
we may be able to pull the setting out of this cab if it is the fix.

The cab is the same old 8525 keyboard mapping fix.
The key referenced in the OP has typos at the very least.
The ROM referenced in post #7 is the latest AT&T ROM, in which the problem has been fixed.

vp3G said:
The cab is the same old 8525 keyboard mapping fix.
The key referenced in the OP has typos at the very least.
The ROM referenced in post #7 is the latest AT&T ROM, in which the problem has been fixed.
Click to expand...
Click to collapse
it was not working when i first Flashed the ROM this is however to the best of my knowledge.
could you be of help vp3g?

thepcguy85 said:
it was not working when i first Flashed the ROM this is however to the best of my knowledge.
could you be of help vp3g?
Click to expand...
Click to collapse
Many many people have asked him what he did in his 3.61 rom thread. You may read his full response there, but, in short, he cannot replicate it.

I checked to see if this would work but my OEM/PhoneSettings Doesn't even have registry key as An Option.
fun_key said:
Wow nice tips!
Was wondering how to get rid of this in my rom.
This was very helpfull
EDIT: Didn't worked for me. Tried some different typo but still no luck :/
Click to expand...
Click to collapse
If your saying This , Then that means it has more to Do with Just the Build. I thought it Was the Build that The vp3G ROM was using that corrected the Error but if Fun_Key ROM is using the same Build than It's more than Just the Build .I"ll try Combing Over the Registry Keys in the vp3G ROM and then maybe get some Answers. I"m sure it's been done But what else can we do right now....

EQUiLiiBRiUM said:
I checked to see if this would work but my OEM/PhoneSettings Doesn't even have registry key as An Option.
If your saying This , Then that means it has more to Do with Just the Build. I thought it Was the Build that The vp3G ROM was using that corrected the Error but if Fun_Key ROM is using the same Build than It's more than Just the Build .I"ll try Combing Over the Registry Keys in the vp3G ROM and then maybe get some Answers. I"m sure it's been done But what else can we do right now....
Click to expand...
Click to collapse
Right now...load down vp3G's ROM and try and pull out as much of the AT&T as I can!

i dont think funkeys is based on 3.61 cuz i was diggin thru the reg and found 3.60 as a ver not 3.61.....hmm

jakeypoo said:
i dont think funkeys is based on 3.61 cuz i was diggin thru the reg and found 3.60 as a ver not 3.61.....hmm
Click to expand...
Click to collapse
I made some mix, but most part should come of 3.61. When I first built my rom there were some issue that denied me to use a full 3.61 through pandora.
But this is in fact a good hint which could allow me to troubleshoot the key mapping issue.

Build 19949 Locked After 16th June

My device has been locked. It now shows a screen with the following:
This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information, please revisit the web site that you used to obtain your current beta release.
Click to expand...
Click to collapse
I couldn't do anything with my device now, and soft-reset doesn't help. Perhaps another build helps, but I like my current ROM. Any solutions to this?
----------
For those who were using PDAVIET 2G, a solution has been posted by elivne at http://forum.xda-developers.com/showthread.php?t=400388
I have tried it and it works without the time bomb. Cheers..

kwangchin said:
My device has been locked. It now shows a screen with the following:
I couldn't do anything with my device now, and soft-reset doesn't help. Perhaps another build helps, but I like my current ROM. Any solutions to this?
Click to expand...
Click to collapse
I believe you will have to flash a different ROM...
Cheers.

can you establish activesync to flash a new/different ROM?
Anyone else seeing this? Is it all ROMs builton 19949 or just a particular one?

zim2dive said:
can you establish activesync to flash a new/different ROM?
Anyone else seeing this? Is it all ROMs builton 19949 or just a particular one?
Click to expand...
Click to collapse
Set your date to 16th June and you will know~ =)

my hermes also locked 2
now flash back to 19588 version

same problems here, device lock >.<"

is there not a fix for this? registry change?

My device locked too .... my rom is pdaviet rom build 19949 and not come back until I did a ahrd reset.... going back to 19900

the same here
the same here, can some one raise this point in pdaviet web sit

the same for me, pdaviet version build

I have the same problem... I can't connect with my active sync.. how can I update or change my rom? help please...
P.S. I can't do the "Flashing with your Memory Card" as 1, I don't have another device or a reader for it and 2, I have 1.3GB of impt files in it..

kwangchin said:
My device has been locked. It now shows a screen with the following:
I couldn't do anything with my device now, and soft-reset doesn't help. Perhaps another build helps, but I like my current ROM. Any solutions to this?
Click to expand...
Click to collapse
I believe this should fix it. use a hex editor to edit shell32.exe's S000. search for 0000004AB2FFFFEB, change it to 0000004A0000A0E1.

@trashcan: how am I to do the editing? Will it work even though my unit is not connected with activesync?

to update to a new rom, even if you can't connect with activesync, press the power + left ok buttons and press reset until a 4 color screen appears. then you should be able to update to any image using RUUWrapper.exe

@destro: thanks alot. it worked

me too.. yesterday get lock..

trashcan said:
I believe this should fix it. use a hex editor to edit shell32.exe's S000. search for 0000004AB2FFFFEB, change it to 0000004A0000A0E1.
Click to expand...
Click to collapse
I found shell32.exe but I can't really edit it. Can you give a more detailed explanation on what we have to do.
Thanx
Eran

jocool said:
I found shell32.exe but I can't really edit it. Can you give a more detailed explanation on what we have to do.
Thanx
Eran
Click to expand...
Click to collapse
Quote:Originally Posted by trashcan
I believe this should fix it. use a hex editor to edit shell32.exe's S000. search for 0000004AB2FFFFEB, change it to 0000004A0000A0E1.
I found shell32.exe but I can't really edit it. Can you give a more detailed explanation on what we have to do.
Thanx
do this code will fix the timerbomb?

Same...
Same...

First thing I'm doing from now on with all new ROMs is:
Set year 2050 right after flashing!
And see.

**Android On The Dash** Is Partly Working, But We Still Need Drivers

Okay so me and a few helpful people from the #htc-linux and #linwizard channels on freenode have built a version of linwizards kernel for the wizard to run on the excalibur! At first we had no framebuffer so no screen at all but thanks to tmzt, the framebuffer is fixed. Also myself, tmzt, and ali1234 made a (semi) working keymap. All the buttons work just a few tweaks need to be made.
**UPDATE**Thanks to some brilliant work by starwarrior we now can load android and play with it, the phone functions do not currently work, more details on post 76. Have fun.
I have included all you need to run the linwizard kernel on your excalibur. It is as safe as a soft reset; nothing permanant is done to your phone. You will have to remove the battery to reboot and get back to your normal windows enviroment.
Currently there is no support for the following and are a work in progress:
X
Sd card access
GSM usage (calls, sms, gprs)
Anyone with this type of experience or anyone who wants to help at all please email me at gentoon at gmail dot com.
Thanks to everyone working on the linwizard project and everyone who has helped do far.
http://www.sendspace.com/file/gfme0e
To run all you have to do is extract run the haret executible and click run. You will see some text letting yo know its loading the kernel, then some garbae as the framebuffer adjusts... then a login screen just enter root and nothing for the password field. Then there you go a working linux enviroment!

I know little to nothing about Linux but I am always up for something new. I have a "spare" Excalibur- and in another week I will have 2 spares so if you need anything specific tested let me know

Ummm so do you have the program available or no...

Know a place for him to host it?

gospeed.racer said:
Know a place for him to host it?
Click to expand...
Click to collapse
http://www.mediafire.com/

stylez said:
http://www.mediafire.com/
Click to expand...
Click to collapse
I was just going to say that... Mediafire is amazing...

sorry about that forgot how long uploading over a gprs can take, im visiting family and have no pc, so i have been doing everything over my dash. I added a link to the first post.

Okay operamini doesnt want to let me edit my post so sorry about the double post, here is the link:
http://www.sendspace.com/file/gfme0e
also you wil probably have to do a soft reset right before you run haret to avoid it freezing. Have fun.

Is it possible to see a screenshot of what it looks like on the excalibur.
Thanks

IDK for some reason I am hesitant to try this...

The main project is located at http://linwizard.sourceforge.net you can see some screenshots there of it working on the wizard. Of course our port doesnt support everything they have working on the wizard yet, but with some moe help we could.

BruteSource said:
The main project is located at http://linwizard.sourceforge.net you can see some screenshots there of it working on the wizard. Of course our port doesnt support everything they have working on the wizard yet, but with some moe help we could.
Click to expand...
Click to collapse
Much respect for putting this together.

let me know how i can help.

ptheabstract said:
let me know how i can help.
Click to expand...
Click to collapse
Well do you know anything about linux? I can get the kernel source uploaded. We need a better keymap first of all( we need \ mapped, also control and esc are mapped but dont seem to be working), then someone who knows something about X, it would be nice to have a GUI. Right now I would just like some people to test it on their excaliburs. Also all of the credit for the original kernel goes to the linwizard project. So thanks guys.

Hi,
Here are the patched files for Excalibur. Remove the .txt extension and copy them over the corresponding files in linwizard kernel tree.

Im going to be adding a detailed to do list on the main page. Once i get some real developers rounded up we are going to make this an official project on sf.

hey..i have seen this day in my dreams..lol
anyways i have ubuntu on of my pc's and love it...so i don't know too much about linux but i would definitely be willing to help!

dope biz...ill start looking into porting a keymap
....after midterms lol

ptheabstract said:
dope biz...ill start looking into porting a keymap
....after midterms lol
Click to expand...
Click to collapse
haha sucks I have midterms as well... sucks so bad...

Has anyone installed and gotten a to a terminal succesfully besides me yet? I could use some more testers.
Glad to see someone wants to help on he keymap.. right now everything works just need to map things like \ ctrl esc... etc

Can't add programs to start menu

Hi,
I've searched Google and this forum so apologies if this has been answered, but I have a strange problem.
I presently have 25 out of the available 30 slots on my start menu (Touchflo) occupied. However, when I try to add programs to any of the last free 5 slots, I can select from the programs list, but when it goes back to the Touchflo start menu, the newly added program isn't there and I still have 5 free slots.
No matter which programs I try to add, or how many times I reboot, it doesn't work.
Interestingly, if I delete any of the previous 25 and try to add to one of those free slots, it works fine.
I have no idea why this is happening or how to fix it, and I'm hoping someone can give me some advice please.
Cheers,
Pete

Hi there,
Anyone got any clues or am I the only person on the planet having this problem?
Cheers,
Pete

mine is working fine... have all of them loaded up

I am having this same problem. I can't figure it out!

Are you using a cooked ROM? I recall having this problem when I tried out the Energy Genesis ROM. According to users from that thread, it was a known bug.

I fixed the problem experienced with the Genesis ROM by installing this cab http://forum.xda-developers.com/showpost.php?p=4096922&postcount=1 it might help. You could check the slots are not set to readonly as well (see reg keys in linked post)
Gordon

GordonTGopher said:
I fixed the problem experienced with the Genesis ROM by installing this cab http://forum.xda-developers.com/showpost.php?p=4096922&postcount=1 it might help. You could check the slots are not set to readonly as well (see reg keys in linked post)
Gordon
Click to expand...
Click to collapse
Thanks Gordon, I have checked the registry and they aren't read-only, but I'll give your suggestion a try to see what happens. Thank you
Pete

ohyeahar said:
Are you using a cooked ROM? I recall having this problem when I tried out the Energy Genesis ROM. According to users from that thread, it was a known bug.
Click to expand...
Click to collapse
No, standard ROM I'm afraid, but thanks for the suggestion.
Pete

The Sprint ROM doesn't seem to allow you to add icons the homescreen at all; the ones that are there at default are the only ones you can add. You can take a few away, but that's the only amount of customization available.