Wassup All,
This thread is dedicated to problem resolution. So if you have a prob let us know. And for those who know how to fix the problem post your solution here and let everyone be happy!
BTW, here is a set of solutions for:
1) those whose WM5 lockups during the night (haven't had this for a week or so after applying the following):
a. Make sure your Today Items are compatible with WM5 (disable suspicious items by unchecking Settings->Today->Item name box);
b. Disable HKCU\Control Panel\Phone\Sleep by putting 0 value;
2) those whose GPRS connection drops when putting/receiving a call:
a. Make sure your HKLM\ConnMgr\Planner\Settings\SuspendResume contain ~GPRS! value
b. Power off your device after 5sec of GPRS connection establishment
c. Try to place/recv a call
3) those whose Bluetooth over ActiveSync have stopped working unexpectedly:
a. Make sure your desktop PC have at least one network adapter enabled (if you have no adapters you may install MS Loopback software adapter from network adapters section of hardware installation wizard)
b. On your PPC, check ActiveSync->Connections->Syncrhonize all PCs using this connection box
4) those who have dual sim card and changing of cards using flight mode off/on takes so much time:
a. Whenever you need to change sim card start Wireless Modem application, choose Irda from the drop list and tap Start. Then tap Stop and close Wireless Modem. Now you can turn off flight mode in much faster way.
5) Caller ID filter to be used during the night or busy sessions:
a. Assign a ringtone to VIP contact using Contacts->Ringtone
b. Find any silent wave/wma/mp3 file and place it to \windows or \windows\rings folder
c. When you need to receive only VIP calls choose this silent audio file from your Phone->Options->Ringtone drop list
6) To disable automatic repeat of reminder:
Set "0" to HKCU\ControlPanel\Notifications\Reminders\AutoSnooze\AutoSnoozeMins value
7) To enable MMS reception:
Try this http://forum.xda-developers.com/viewtopic.php?p=142617
Re: WM5: Problem Resolution Center
Is there anybody who progressed with ArcSoft MMS/Inbox integration?
This thread is an excellent idea. Here are a few questions/issues I am facing with WM5.
- The Alram Bug is back My alarms don't ring. Sometimes they ring once and instead of repeating, like they are supposed to, they just go back to sleep. They will only continue when i turn on the phone (whever that may be).
- ActiveSync is always running on the PPC. If I kill it manually, it comes back after a while.
- Can I hide the BT icon in the system try? Can I control the display (hide/unhide) the system tray?
- Can i customize the soft buttons (Phone, Contacts) at the bottom? i.e. assign other programs to those buttons and change the label?
- Camera and record hardware buttons do't work. This has been widely reported and I believe its under investigation.
humayunl said:
- The Alram Bug is back My alarms don't ring. Sometimes they ring once and instead of repeating, like they are supposed to, they just go back to sleep. They will only continue when i turn on the phone (whever that may be).
Click to expand...
Click to collapse
In your particular case let's try the following: while your system is powered (power off value does not turn off your device) a set of automatic snoozes will be performed and each snooze will prolong time of power-off.
So, change HKCU\ControlPanel\Notifications\Reminders\AutoSnooze\AutoSnoozeMins to a value less than the value of system Power Off.
Example of alarm that repeats every 2 mins on a system that suppose to power-off after 3 mins of idleness:
a. Set up value of Power off (Settings->System->Power->Advanced->Turn off device if not used for) to 3 mins
b. Set the registry value to 2 mins
- Can I hide the BT icon in the system try? Can I control the display (hide/unhide) the system tray?
Click to expand...
Click to collapse
You can control appearance of the icon by moving \Windows\Startup\BTIcon.lnk file to and from \Windows\Startup\ folder. Example, I want tray icon so I leave the file in \Windows\Startup\ folder. Now I don't want tray icon so I move \Windows\Startup\BTIcon.lnk file to a different place and soft-reset my device to get the changes take effect. Moving operations can be performed using Windows Explorer (Cut function)
- Can i customize the soft buttons (Phone, Contacts) at the bottom? i.e. assign other programs to those buttons and change the label?
Click to expand...
Click to collapse
Place path and name for your applications at the value 1 of HKLM\Software\Microsoft\Shell\Rai\:MSCProg and HKLM\Software\Microsoft\Shell\Rai\:MSContacts registry branches.
Here is an example of starting calculator when pressing Contacts button:
HKLM\Software\Microsoft\Shell\Rai\:MSContacts\1 = calc.exe OR \windows\calc.exe
WARNING! Changing of CProg branch will lead to remap of your Green Phone Button too.
ActiveSync is always running on the PPC. If I kill it manually, it comes back after a while.
Click to expand...
Click to collapse
I also noticed that and changed many reg values so don't remembler what helped. First try to uncheck this checkbox "ActiveSync->Connections->Syncrhonize all PCs using this connection" when not using activesync and soft-reset your device to see if it helps. Let me know on your progress pls.
Camera and record hardware buttons do't work. This has been widely reported and I believe its under investigation.
Click to expand...
Click to collapse
These seems to depend on your boot rom version. I have 1.2 and I upgraded from W2k3SE 2.20chs with nb.nbf only and my buttons work Ok.
PocketIE starting with blank page
Starting PocketIE with a blank page is a bit faster than loading a default page with graphics.
1) Navigate your PocketIE to "about:blank" (type and open in the address bar)
2) Open Tools->Options and set current page as your home page
Now, each time you start your PocketIE a blank page will be fastly loaded
ActiveSync4 on NT-based OS that don't have SPs installed
If you haven't updated your OS with service pack you can still install ActiveSync4 and use it for Bluetooth or IrDA synchronizations.
1) Login with Administrative privelege
2) Open your Windows Explorer and open properties of "setup.exe" file. Choose Compatibility tab, check "Run this program in compatibility mode for" box and select Windows 2000 option
3) Run setup.exe
TomTom51/WM2005/BlueTooth problems
Can someone help me?
About every minute TTN5.1 is loosing the Bluetooth GPS
(EMTAC Crux II/BTGPS) but soon after finds it again.
I'm using de TomTom5patch but can not use com5.
Also installed Bluetoothtools, using com4 for the BTGPS.
Com 5 is in use according to Bluetoothtools
(http://www.bluetooth.jazztel.es/).
Within TTN5.1 i can select the BTGPS correctly on com4.
It identifies itself as the BTGPS.
I'm not using "New Outgoing Port" or "New Incomming Port"
because i'm not sure if this is necessary.
If it's necessary, what port must I use?
Can the settings done by the TomTom5patch be reversed and how?
Which settings are affected by this patch?
How do i disable Infrared on the Himalaya?
How do i disable BT within TomTom?
My main issues seem to be
MMS- Cant get to work at all
GPRS- Cant get internet over GPRS
Camera and Notes button- Can live without these
i have the same problem with tomtom my bluetooth keeps droping out.
i'm using tomtom5.0 and the tomtom com5 patch
with the deflut microsoft bluetooth
i set my outgoing port to com5 and tomtom5.0 can find it but like i said it drops out alot
and one more side note i put my com5patch file in my tartup folder but after i soft-reset and try to start tomtom. tomtom can't find com5 so i have stop tomtom and manuly go start the com5patch
this kinda sucks so if anyone can help that would be great
Active Sync cannot work at all
I got problem with active sync, and xbackup. It always said database error, and all option on Hima's Active sync setting greyed out.
does anyone get the same problem? How to solve it? thx
IMate->WM2k5 said:
Wassup All,
This thread is dedicated to problem resolution. So if you have a prob let us know. And for those who know how to fix the problem post your solution here and let everyone be happy!
BTW, here is a set of solutions for:
4) those who have dual sim card and changing of cards using flight mode off/on takes so much time:
a. Whenever you need to change sim card start Wireless Modem application, choose Irda from the drop list and tap Start. Then tap Stop and close Wireless Modem. Now you can turn off flight mode in much faster way.
Click to expand...
Click to collapse
Hi, if I remember correctly, the STK from WM2K5 is not working with any STK SIM card. May I know how you managed to make it work?
Thanks
WM05
is there any location i can get wm05 for PDA2K
Re: WM05
gwassef said:
is there any location i can get wm05 for PDA2K
Click to expand...
Click to collapse
obviously not in this thread... jerk
problem:
media player 10 turns the screen back on when changing tracks despite 'screen toggle' being active.
Re: TomTom51/WM2005/BlueTooth problems
Dodger said:
About every minute TTN5.1 is loosing the Bluetooth GPS
(EMTAC Crux II/BTGPS) but soon after finds it again.
I'm using de TomTom5patch but can not use com5.
Also installed Bluetoothtools, using com4 for the BTGPS.
Com 5 is in use according to Bluetoothtools
(http://www.bluetooth.jazztel.es/).
Click to expand...
Click to collapse
Automatic disconnect is known feature of Pocket Bluetooth Tools it automatically disconnects after 1 minute of BT inactivity. As I remember you can stop this feature by taping on clock icon at your today so your clock icon should not have white color but should be grey. Warning! By disabling automatic disconnect feature your battery draining rate may increase.
Within TTN5.1 i can select the BTGPS correctly on com4.
It identifies itself as the BTGPS. I'm not using "New Outgoing Port" or "New Incomming Port" because i'm not sure if this is necessary.
If it's necessary, what port must I use?
Click to expand...
Click to collapse
Sorry don't have TT & BT GPS. Haven't you tried Settings->GPS Wizard for setting up your GPS?
0) Pair your GPS using serial profile
1) Set COM9 to Settings->GPS->Programs tab->"GPS program port:"
2) Set COM0, if not using ActiveSync over BT, or COM1, if using AS over BT, to Settings->GPS->Hardware tab->"GPS hardware port:"
3) Make sure your Settings->GPS->Access tab->"Manage GPS automatically" is checked
4) Open your TT and select COM9 in your device configuration window
OR
0) Pair your GPS using serial profile
1) Select your device through Settings->Connection->Bluetooth->Com Ports->New Outgoing Port->Your GPS Device
2) Tap Next
3) Select any port under "Port:", e.g. COM8
4) Open your TT->GPS Device Configuration->Select Com8
Try to check if your GPS works... if not, continue with the following:
4.1) Open Settings->GPS Wizard, Assign hardware com port to COM8 (Hardware tab) and Assign program com port to COM9 (Programs tab), check the "Manage GPS automatically" in Access tab
4.2) Select COM9 in your TT.
Good Luck! ;-)
How do i disable Infrared on the Himalaya?
Click to expand...
Click to collapse
Infrared for reception of files is disabled by unchecking Settings->Connection->Beam->Receive all incoming beams box
GPRS- Cant get internet over GPRS
Click to expand...
Click to collapse
Assuming that you know your internet access point name, user name and password for your operator (if you don't know try to visit your operator's website):
1. Tap on Settings->Connections->Connections->Advanced->Select Networks->New under "Programs that automatically connect to the Internet should connect using:"
2. Enter your ISP name under "Enter a name for these settings:", e.g. Turbo-GPRS
3. Select "Modem" tab
4. Tap on "New"
5. Enter a name for connection under "enter a name for the connection:", e.g. turbo.gprs, and choose Cellular line (GPRS) under "Select a modem:". Don't leave "Cellular Line" but choose "Cellular line (GPRS)"!!!
6. Tap "Next"
7. Enter your provider's access point name, e.g. internet
8. Tap "Next"
9. Fill corresponding user credentials and tap Finish
10. Run Internet Explorer or Inbox to connect to the Internet
vbexpert said:
Hi, if I remember correctly, the STK from WM2K5 is not working with any STK SIM card. May I know how you managed to make it work?
Click to expand...
Click to collapse
Sorry don't have STK enabled sim but STK application runs and displays that "No application is installed on current SIM".
btw, my dual SIM card changes cards using Radio On/Off function not STK
Re: WM05
defroster said:
media player 10 turns the screen back on when changing tracks despite 'screen toggle' being active.
Click to expand...
Click to collapse
Just tested track change in the following order:
0) Didn't cradle
1) Run WMP
2) Unset "Screen Toggle" option so it is "None"
3) Loaded 5 mp3s to SD
4) WMP automatically scanned SD for new content
5) Started to play my library's all music
6) All five tracks and overall repeat were performed without turning backlight on again
Does anyone else have this prob???
Registry Settings -> Software Settings
Dear All,
Please pay attention that after making changes, installing new software or doing your usual software settings it is advisable to power off your device before soft-resetting.
Example, I recently setup my Inbox mail accounts and soft resetted my device in a usual way. After a soft reset I found out that none of my accounts was actually kept. So, I did setup again, powered off my device and soft-resetted it. After soft-reset all mail accounts were saved and were workable
Solution for TomTom51/WM2005/BlueTooth problems
Hi all,
I think I've found a solution.
TTN5 works for me perfect now, but when I activate the
compass so it will display itself on the navigation screen,
then the GPS is lost (and found again) about every minute.
When I deactivate the compass, there is no problem at all!
So, try this and let me know if this solves your problem.
avengerpenguin said:
My main issues seem to be
MMS- Cant get to work at all
Click to expand...
Click to collapse
Keep your eye on this thread:
http://forum.xda-developers.com/viewtopic.php?p=142617#142617
I have installed JETware Hands-free Extension for Windows Mobile phones. How can i "on" my bluetooth from the JETware through comm manager bluetooth button instead?
I'm not very clear, of what your trying to do???
However: I to have JetWare extension installed and after the initial set up you can run most functions through ComManager. I'm only guessing, but it looks like your trying to replace the bluetooth on/off Icon with the JetWare on/off Icon? If so, you may need to cook the commanager... I haven't needed to do that yet because I've been able to do almost everything with the current set up... Could be neat to see if it works... the bad thing is when new updates come out...
Good Afternoon All,
I've been playing with a few ROMS, and Kitchens, and reading the forum's, threads; but I have yet to find out one that talks about what some of these applications do, and if they are really needed.
These are a few that I am interested in;
SqlCeMobile
Transcriber
Enterprise
Beam
Also, curious about the removal of;
Error Reporting
External GPS
I know there is a .cab to remove the icon for error reporting, but what about removing it totally? What exactly is the external GPS? What does it do?
Also, I've noticed that on some ROMS, chefs either create .rgu, and .dsm files in their packages, or they just totally leave them out, and I am guessing they just make the changes to the default.hv file. I just wanted to know what's the difference?
Any input on this would be great, as I know that I am not the only one that is curious about this.
Partial answer :
SqlCeMobile = MS SQL for mobiles I guess (database engine)
Transcriber = character recognition (clic on the "keyboard" icon at the bottom when in a text area, then on the arrow). I don't know anybody who likes this kind of typing !
Further partial answer
- Enterprise : utilities used for connectivity to enterprise systems (VPN mainly)
- Beam : option in Comm Manager to turn on/off the Infrared port (by default it is ON and "looking" for incoming connections or notification when the pda is near another infrared-enabled device (e.g. laptop, another phone etc)
chrisvor said:
- Beam : option in Comm Manager to turn on/off the Infrared port (by default it is ON and "looking" for incoming connections or notification when the pda is near another infrared-enabled device (e.g. laptop, another phone etc)
Click to expand...
Click to collapse
The beam option also allow the receipt of files transmitted via bluetooth.
Jörg
Hi all!
I searched a lot here to find this little CAB which I had at my Blue Angel.
This little program integrates into the Today screen and lets you change the volume, notifications, BT, WiFi, Screen orientation settings according to 9 preset profiles. You can also set a schedule to auto change profile at a desired time.
Since there are no 'About...' button there and it was part of an EXTROM at Blue Angel, I don't know the origin of this masterpiece. However I find it utterly useful, so download it and enjoy! AFAIK it works on WM5 and WM6 no problem (VGA compatible...)
(PS.: The only thing I missed is backup - I need to set my profiles after every hardreset.)
EDIT:
Thanks to creed, we got the about screen. I don't know how I couldn't find it.
Here is the official page: http://www.winmobileapps.com/device/pocketpc/pwm/pwm.aspx
Looks useful, anyone else tried it?
MM
This is a nice little program, almost perfect in fact, but I have found a problem with it. I created a 'Home' profile that enables me to use my wifi network but the profile program does not allow me to change the connection network setting.
So it connects via wifi but then trys to connect to the internet using the existing GPRS connection. Of course I could change this manually but if the program could do this it would be perfect!
Also it would be nice if it had more control over the data connection i.e. choose GPRS or 3G or wifi and the afore mentioned network connection setting.
Lastly it doesn't seem to pick up some of my custom ring tones. I suspect this is a format issue as this program was designed for WM5 originally.
The 'About' info is here:
Thakks for the replies. Trying the Free cab for now. Exactly what I wanted...
Thanks
Thank you for the about screenshot... Chenking it out.
Yes, it lacks some of the radio on/off functionallity. I once tried to create a 'phone off' profile for the night to save battery, but as I remember the switching on was problematic.
And yes, in WM6 it doesn't seem to support some of the wma formatted sounds... I converted the Alarms : )
Very nice plug-in. But with WM6 I cannot set MP3 files as SMS Tones Anyone can help with that?
Does anybody know about "[Script]" feather on Selecting Sound tab?
What is it? How to wrote script?
Has anyone got any good idea for setting up a quickly-accessible shortcut for turning the wifi connection on or off?
There's CommManager button on the keyboard that leed you to WiFi and other connections. I'm on the SPB Mobile Shell3. Try it and you find out that there can be everything you imagine on the screen. So have Wireless Manager right in fron of me.
Dan
Thanks - I hadn't noticed that.
Interesting that you're choosing to use SPB Mobile Shell 3 instead of TouchFlo - I was thinking of doing the same myself.
TF3D is definitely not bad and this last release is good. But MS3 is awesome, using this already since times of Kaiser. There is much more freedom and operativness with MS3. Worth of trying at least...
itm said:
Has anyone got any good idea for setting up a quickly-accessible shortcut for turning the wifi connection on or off?
Click to expand...
Click to collapse
Have set long press on the "phone" key to Comms Manager, then you can twiddle wi-fi to your heart's content!
This program works great just one click on or off
http://www.freewarepocketpc.net/ppc-download-aktogglewifi.html
This is one of the issues that I'd like to solve as well. One of the great capabilities of Nokia Symbian OS is that you can directly press on a bookmark for example and it will pop up a menu asking you to choose the way you want to connect (GPRS, WIFI access point, WAP, ...)
You just choose from it and there you go! Once you close the browser or the application that requires the internet connection it automatically stops wifi!
I find this setup great and it makes things much easier. Any way we can have such a setup on our beloved TP2?
I have installed smaberg's action screen:
http://forum.xda-developers.com/showthread.php?t=479206
Only the bluetooth button dont work I think.
milo_f said:
Only the bluetooth button dont work I think.
Click to expand...
Click to collapse
That's affirmative!
The util, a great util by the way, is written for the Xperia, which has a WM bluetooth stack.
The Rhodium has a WidComm BT stack, so that's the only part that won't work.