Related
Stuck at 28% of upgrade
phone is showing 4 colors and does nothing
PLEASE PROVIDE LINK TO BE SAVED
LINKS AND INFO WHAT TO DO IN DETAIL
I AM NOT A COMPUTER GUY
flash official rom back. Then download this rom
http://rapidshare.com/files/42141641/Wm6_Official.zip
and flash that one,
link for official rom ?
i remind you the phone is at the 4 colors mode
this page has all official roms ever made for trinity
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
pkaza said:
link for official rom ?
i remind you the phone is at the 4 colors mode
Click to expand...
Click to collapse
Don't panic, the phone is not dead. You will get it fixed. Just follow the instructions given, there is a solution.
updated with official rom
hardspl does nothing
other way
?
Help me too!!! I don't even have an official ROM for my Orange m700
ward777 said:
Help me too!!! I don't even have an official ROM for my Orange m700
Click to expand...
Click to collapse
You could try this fix http://forum.xda-developers.com/showthread.php?t=316313&page=5
I don't think so. My Hard-SPL was overwritten and now has the 3.0 version and not SPL version 9.99.
9.99 is NOT Hard-SPL, it's Des's Crashproof spl which is not even trying to prevent itself from being overwritten.
OliPro?
Hello
What about OliPro SPL-1.20.Olipro with IPL-0.5
Can it also be overwritten or wich hard spl do I need first to flash?
Roman
don't worry , simply follow the instruction and reflash it again with the new rom , then it will pass through the 28% ...
Shadowmite said:
9.99 is NOT Hard-SPL, it's Des's Crashproof spl which is not even trying to prevent itself from being overwritten.
Click to expand...
Click to collapse
I know that
But I did have Hard-SPL and now it's gone so it will get overwritten when installing this ROM as well
tony800708 said:
don't worry , simply follow the instruction and reflash it again with the new rom , then it will pass through the 28% ...
Click to expand...
Click to collapse
What instructions?
ward777 said:
What instructions?
Click to expand...
Click to collapse
I guess you're in a pickle. There must be a way around not having an official Orange rom. Have you tried the SD card method from an Orange rom dump? Otherwise, the rom cookers should be able to come up with something. With all of these people trying these roms certainly you must not be the only one with an Orange phone. Good luck .
Hi Guys,
I am also stuck @ bootloader. I have the original rom, but how do I flash this back? It keeps on telling me that it cannot detect the phone. What can I do? Thank you!
You can flash the spl from the bootloader via mtty, but that's not something Ive seen clear instructions on how to do... you might want to log into #xda-devs in freenode IRC and get stepped through it.
If you're stuck at the bootloader, just try running the hard-spl flash right from there...
ward777 said:
I know that
But I did have Hard-SPL and now it's gone so it will get overwritten when installing this ROM as well
Click to expand...
Click to collapse
Yeah, I thought deleting 'SPL.nbh' would prevent the RUU from installing the new SPL but the Hard-SPL got overwritten on flashing.
Kris
there are 2 spl entries in the release... spl.nb and spl.nbh... you have to remove both. also I'd remove the ipl.nb...
These are the files inside the exe:
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
README.doc
ROMUpdateUtility.cfg
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
RUU_signed.nbh
SPL.nbh
I suppose you meant to remove the .nb entries inside RUU_signed.nbh
Kris
Hello All,
I think I lost my HTC Trinity P3600 device :-( I was trying to update INDIGO_LITE & upgrade failed during half way and I rebooted the device & now it only boot to white screen. If I try to reload another rom it's keep saying rom is corrupted.
Any help will be really appricated
Thanks,
Ankito
k a few questions for you..
1) did you have hard-spl installed?
2) can you enter bootloader manually?
3) have you tried to flash an official ROM from you manufacturer? (WM5 or something)
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
ankitoberoi said:
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
Click to expand...
Click to collapse
Hello,
http://www.smartmobility.nl/_BIN/TRI_DT_WWE_1234052_103_6275_1380011_108_Ship.zip
Bye
so it's an HTC product? look at the wiki, or logon to HTC's website to download the latest ROM for your device and region (europe, asia, etc).
What i meant was did you have hard-spl installed before you flashed, but i'm guessing not since you have the new bootloader. You really need to read up and protect your device before you flash.
Try to find an official ROM and see if that works first..
Thx jotam
Phone start working again. Do you guys recommand any 6.0 rom which I should use? Should I wait for HTC to come up with offical rom?
Thanks,
Ankit Oberoi
htc has official rom already.. just try and see what you like, but pdaviet and indigo are good for me.
make sure you have hard spl installed before you flash again. You can follow the guides here if in doubt.
Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
NightWolf88 said:
Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
Click to expand...
Click to collapse
Try reading the rules here before posting!
Also, get familiar to using forum search and also google search.
oh no...
not someone who and use the search button
i have tried the search function!
i cannot find a concrete answer as to if htc has actually got a download page with the roms or if we need to use the rom 1.93... and this hard spl program...
fyi when searching i found many ppl asking the same qus as me yet there was no answer other than a few wasteful people saynting use the search function... if u do know the answer dont be Arrogant and say use search - the onlynthing u are doing is wasting ppls time and increasing ur post count. i asked for some help if u dont have anything useful to add dont post...
thanks
www.htc.com - E-club
It's in your phone manual as well.
Riel said:
www.htc.com - E-club
It's in your phone manual as well.
Click to expand...
Click to collapse
HTC e-club doesn't have roms for diamond - not on Hong Kong where I login anyway.
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC havent release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Also to install the 1.93 ROM posted by Tom do I need to install HardSPL on my phone..? Because it looks like that package will work with no need to install any SPL, its just an exe that runs through a wizard... What way/how does the HardSPL versions here prevent me from bricking the phone? How do I find the SPL version that is currently on my phone and can I revert back to the original SPL/remove hard CID so I dont void warranty..?
Tim what ROM are you using on your Diamond and how did you install it???
Also does the ROM posted by Tom have the Radio ROM (I think its 1.00.25.5 inc in the package guessing by the file name?) let me use Quad band network?
HTC does release the updates, but not on their site. Only to their resellers I believe.
Yes, it is essential to install hard SPL on your phone for any ROM you want to try. I am using walshieau's Elite 3.0 ROM 9 (which is very quick). This is what I did to install it:
1) Flash hard SPL signed version (which will hard reset your phone, so backup using PIM backup from pocketpcfreewares.com)
2) Flash the ROM of your choice
After this I decided to update the Radio to version .05
In order to do this I needed to first flash with UNsigned hard SPL, then flash the radio using CustomRUU. Now I have support for Telstra's NextG 850Mhz.
NightWolf88: check your PM and you can contact me by phone and I may be able to explain in more detail.
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
NightWolf88 said:
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC haven't release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Click to expand...
Click to collapse
Same problem here!
Yes, I did use the search function but didn't find what I was looking for.
That being said, I have registered my Diamond on e-Club. (It's a French Orange one, so I used a hack I found on another forum to correctly register by changing "HT825" to "HT826" in the SN.) However, I don't see anything for the diamond available for download under "Phone Software Updates" and "Other Downloads."
So my question is: does HTC offer certain downloads only to certain SN?
The answer might have been already posted somewhere; if so please redirect me (and NightWolf88) to the correct thread if you know it!
Thanks
PS: NightWolf88, check out www.modmydiamond.info if you haven't already: it's a fantastic tutorial that will most likely answer most of your questions regarding the fine art of ROM flashing and restoring.
Yeah I have checked that page, great site.
From what I have read there are no HTC e-club updates for the Diamond yet, only updates going to resellers... I also emailed HTC Tech support - I got this reply:
Thank you for choosing hTC. Please note that there's no new rom for HTC Touch Diamond at the moment. We recommend you to visit our hTC HK website for the latest information as below
Click to expand...
Click to collapse
I wish that HTC would pull there finger out and release an official ROM.
After putting an Official Rom update on the e-club site but then taking it down pretty quickly, it seems strange they haven't released one yet.
Im holding out for an Official Rom, but I think i will just give in and flash a cooked rom in the end.
Gonna try flashing the Radio first as I havent got an issue with the Rom itself, just with the signal behaving very erratically!
Will see.
Great site tho xda devs and also the modmydiamond one to, some invaluable info on both of them.
Thanks everyone on here.
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Riel said:
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Click to expand...
Click to collapse
Yeah it seems that only device SNs that shipped with <1.37 have an update, there is no offical release of 1.93 which is (from what I have read) better than 1.37, but 1.37 was alot better than the 34s and 35s if you do a search around the net alot of reviewers got sent these ROMs which fixed initial lag issues...
I want to put 1.93 on my device, wanted offical htc release but I'm just going to use the one posted here...
Any one hjelp me with the ROM update???
NightWolf88 said:
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
Click to expand...
Click to collapse
Hi,
My Diamond has no response on the screen, so I think I need to return to factory for repairing. However I have difficulties in falling back to stock ROM and SPL.
From the Wiki:
---------------
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
...
-----------------
I can't flash my ROM to latest HK WWE CSL ROM (2.03) as it just stopped at 0%. I'm using SPL-1.30.OliNex.
Questions:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
1) Should I flash to v1.93 (the very beginning of the ROM)?
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
3) Anyone can give me a reference on the step-by-step in details...
Thanks!
Please help...
F810
Questions:
f810 said:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
Click to expand...
Click to collapse
If the latest was the offical from the site then you could use that - as you are having issues flashing this with 1.30 HSPL, I would suggest updating that to 1.40
f810 said:
1) Should I flash to v1.93 (the very beginning of the ROM)?
Click to expand...
Click to collapse
This might be a easier option and should work woth the 1.30 HSPL
f810 said:
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
Click to expand...
Click to collapse
This is recommended
f810 said:
3) Anyone can give me a reference on the step-by-step in details...
Click to expand...
Click to collapse
Its really straight forward like the WiKi suggests
This Thread may help
Thanks a lot.
Re Q3, so do you mean if I extracted the stock NBH, it's only OS but not including RADIO? If so, I will get the RADIO from wiki page later. Would you please clarify for me?
After your information, I think the steps in Wiki are clear. Thanks.
If this is HK ROM is the one you have downloaded from HTC PAGE then it has a radio included
Since my Diamond is totally malfunction in the touch screen, I can't response to all the confirmation & prompts...
I've failed to install Stock ROM and tried your recommendation on upgrading to HSPL 1.40. There was a confirmation on running the program in my Diamond and I can't press YES and now my diamond is just like bricked.
I've also tried pressing VOL DOWN + Reset to connect the Diamond via USB. The ROM Update Utility has "successfully" update the HSPL, but actually when I hard reset it and found it's still running 1.30... Can I just use this approach to fallback to Factory status??
Anyone has good idea on how to fallback to Factory Stock ROM, RADIO and SPL, provided that my screen has totally no response to me?
PLEASE...PLEASE...PLEASE help.
You will not be able to update olipros Hard SPL in bootloader mode as the SPL is protected and the 1.30 will prevent this although show its been done.
What you will need to do then is just load a 1.93 ROM from boot loader. the were some in that link i posted earlier. as to reverting to the default SPL - you may be luck not to need the screen for any confirmation. but running a new SPL to overwrite Oli's you will need to use windows and the RRU
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
band27 said:
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
Click to expand...
Click to collapse
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Here you go....I did a search
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Read this............Scroll to Post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4
band27 said:
Here you go....I did a search
Click to expand...
Click to collapse
I also got that but it's not win32 program... I believe it's running on the Diamond. But I've hard reset, and never able to setup as it's screen was not functioning now...
kawatsu said:
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Click to expand...
Click to collapse
That ROM had a different boot image - so you need to replace that by flashing another splash .NBH file using RUU.
Original splash can be found HERE
and if needed CUSTOM RUU HERE
Just un-zip these and put the splash file in the same folder as the Custom RUU and run the RUU - the flash should take a few seconds and viola - bye bye Diamond project splash.
f810 said:
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Click to expand...
Click to collapse
I think as long as the SPL is changed and the ROM is of the original language the I think it should be OK to send back like that
f810 said:
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Click to expand...
Click to collapse
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Which is the original SPL?? 1.23, 1.34 or 1.37? I do recall taking a picture of the original SPL when i 1st got the Diamond for days like that but i just can't find it now
I'm bought it from Malaysia. Anybody can help me confirm this??
R3PUBL1K said:
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Click to expand...
Click to collapse
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
f810 said:
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
Click to expand...
Click to collapse
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
f810 said:
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
Click to expand...
Click to collapse
Can anyone help??
Hi!
I need the oficial VODAFONE spanish ROM with CID: VODAP30
I bricked my phone!!!! and i can't put HARDSPL to reflash
NEED!! help!!
Sorry for my english!
Thanks!!!!!
Hi jsaltiveri
Welcome to XDA
the best i can do is tell you where to look, as i am english, i am unable to find a rom for your phone, however, i dbout you bricked it.
first go to HTC and download a diamond ROM
plug your diamond into your PC
plug your diamond into your PC
hold the Vol- and reset
continue to do so until something appears on the screen
run the EXE you downloaded from HTC, follow on screen instructions
any Probs, feel free to PM Me
VODAP30
Badwolve1 said:
Hi jsaltiveri
Welcome to XDA
the best i can do is tell you where to look, as i am english, i am unable to find a rom for your phone, however, i dbout you bricked it.
first go to HTC and download a diamond ROM
plug your diamond into your PC
plug your diamond into your PC
hold the Vol- and reset
continue to do so until something appears on the screen
run the EXE you downloaded from HTC, follow on screen instructions
any Probs, feel free to PM Me
Click to expand...
Click to collapse
Thanks! for your answer Badwolve1
I tried to update with oficial vodafone UK ROM and showed me that invalid vendor ID
I tested with emergency vodafone ROM from spanish group that has the universal CID 111111 but obviously don't pass from 0%, I think that first checks the correct CID, and it stop if is not correct
And the all HARDSPL is the same error! not pass from 0%
Thanks!!!
Try this
Oficial Vodafone Rom 1.93 ESN
Extracted from:
http://www.htcmania.com/showthread.php?t=29059
good luck
carlis87 said:
Try this
Oficial Vodafone Rom 1.93 ESN
Extracted from:
http://www.htcmania.com/showthread.php?t=29059
good luck
Click to expand...
Click to collapse
Thanks! But this ROM is just with CID 111111 , and when I try to flash it not pass from 0%
try to load new hardspl
you can try to reload hardspl..
Update stops at 0%
Short answer: You're running the normal HardSPL and you're trying to flash an unsigned (not signed by olinex) ROM. You need the developer version which fixes the 0% issue. Link is at the bottom of this post. Read on to understand the difference between Standard/Developer Edition!
Long answer: First you need to understand that there are two definitions of "signed". HTC and the mobile operators sign ROMs so that the RUU flash utility allows them to be flashed. Usually this is what the word "signed" in the filename means.
Then there is another definition of signed: The developers of HardSPL introduced their own signing process. They want to ensure that people flashing cooked ROMs can rely on a certain quality standard. The normal version of HardSPL will only allow ROMs signed by OliNex to be flashed. If the ROM you are about to flash is signed, it will say so in the thread you got it from. If it isn't signed, you will need the developer version of HardSPL. That one will allow any ROM to be flashed. Get it at the bottom of this posting.
A note on this: The signing process by olinex makes sure that the ROM you're about to flash won't brick your device. It doesn't mean all other ROMs are necessarily evil.
Click to expand...
Click to collapse
ERROR 262
the-funky said:
you can try to reload hardspl..
Click to expand...
Click to collapse
I try with signed HARD-spl, but the same error 0% error 262
Nobody? have the solution??
Thanks!
Jordi