Need help. I have got a MDA II and my first try on flashing went fine an now I got Syed Ather WM 6.1 Dark Edition on it.
But then I saw this one: http://forum.xda-developers.com/showthread.php?t=394417
which looks very cool and I would like to install it. But everytime I try, the MDA hangs-up. As soon as this program wants to start flashing activeSync loses connection to the MDA and the program says I should check USB connection. The MDA screen is sometimes blank (looks like turned off) and sometimes frozen in the today screen. A soft reset helps for starting again the Ather WM 6.1 ROm.
Can anyone help me?
I don't know what additional informations you need..
In the Bootloader mode the screen says:
R 1.17.00
G 1337.28
D 6.1.SADE
hmm nobody can help???
Related
Hi guys.
Was hoping you could help me out.
I performed a search on the forums and didn't find the answer.
I have an O2 XDAII.
I tried to upgrade the ROM from the O2 site.
The upgrade somehow went south and the only thing I have on the sceen of the device is:
At the top - "Serial"
At the bottom - "v1. 06"
I tried taking out the battery and then putting it in again, but the same things appear on screen as detailed above.
Any suggestions/advice would be gladly appreciated.
I had that.
I plugged back in the USB cable and the message changed from Serial to USB - I then re-ran the ROM upgrade and it all worked OK.
Give it a try and let me know how you got on.
I'm getting the same problem. On my phone (UTStarcomm PPC6700), I have the Serial/USB header, with a V1.00 on the bottom.
When I first attempted the ROM Upgrade, it switched over to the screen. I've tried removing the battery, resetting, and re-launching the ROM upgrade app, but nothing.
Any other ideas???
solutions found?
Anyone know the solution?
larboleda said:
I'm getting the same problem. On my phone (UTStarcomm PPC6700), I have the Serial/USB header, with a V1.00 on the bottom.
When I first attempted the ROM Upgrade, it switched over to the screen. I've tried removing the battery, resetting, and re-launching the ROM upgrade app, but nothing.
Any other ideas???
Click to expand...
Click to collapse
ISTR that when you get to that screen it is after a hard reset.
You should just be able to hook up the USB cable and re-install the rom.
If you are having problems re-installing the rom, what sort of error messages are you getting?
Have you tried installing another ROM?
Serial v1.01
This is all that is written on the grey screen after trying to install ROM. Does anyone know how to proceed? I have an i-mate Jasjar.
It doesn't sound as though the rom is getting installed properly.
Do you get any error messages from the ROM installer?
I did not get any errors while installing. I did upgrade to 1.30.101 some weeks ago, but the phone turned very slow and froze. Therefore I now tried to install 1.30.77. Now the screen is grey and the only text is serial and v1.01. Anyone know how to proceed?
problems updating ROM
I have a Tmobile MDA PRO. I updated the ROM to the newest version, but now my phone only displays a screen with a tmobile logo, and the version information and thats it.
I tried to do a hard reset and still the same thing, I tried to redo the ROM install program, but its says[error message 101] that my phone is on but it cannot connect to it.
I have had my phone for one day and it is virtually useless.
Can someone please tell me how to flash the rom, or which is the best ROM to install for the mda pro/qtek 9000 series?
Help would be much appreciated!!!!!!!!!!
koolaid4star said:
I have a Tmobile MDA PRO. I updated the ROM to the newest version, but now my phone only displays a screen with a tmobile logo, and the version information and thats it.
I tried to do a hard reset and still the same thing, I tried to redo the ROM install program, but its says[error message 101] that my phone is on but it cannot connect to it.
I have had my phone for one day and it is virtually useless.
Can someone please tell me how to flash the rom, or which is the best ROM to install for the mda pro/qtek 9000 series?
Help would be much appreciated!!!!!!!!!!
Click to expand...
Click to collapse
Go and get your MDA PRO into Bootloader Mode: Press backlight + power button and do a reset. You should now see without backlight on top of your screen: serial and on the bottom: v.1.xx
Now connect MDA PRO with the USB datacable and run the ROM Update
again .. hopefully you have 50%+ battery capacity
ive got a wizzard .... my prob is that i installed da rong rom ... and now my usb port is not working ... its not charging neither is it connecting to da usb for active sync ... tell me wat to do ....
hi, i have a cingular 8125 and i've being trying to upgrade it from WM5 to WM6 and i downloaded the ROM from a web site, but every time i try to upgrade it the following happens: before the bar starts loading my phone goes off and the the screen turns into a multi-color screen, then on the pc screen says that if i want to recove files or something loke that.
if you have any idea please help me!!!!!!!!!!! i will thank u a lot
Everything you ever needed to know about the 8125 can be found here and here.
Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd
yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.
Thanks for that. Time to give it a whirl! Wish me luck!!
Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.
Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd
I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either
Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.
The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F
question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.
Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F
Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!
Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!
Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.
SPL is 1.25.0000
IPL is 1.25.0001
Ideas??
The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.
OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??
fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.
I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
Hi i am new in this forum but really old on the bussines, well the problem with my phone is that seems to be bricked, sometimes turn on hangs on operator logo and put black screen sometimes can get on boot mode some not, its an strange problem, already tried to flash with micro SD but no luck, i get the phone is this state to repair.
This is what i get when i put phone on boot mode:
IPL: 1.12.0001
SPL:1.12.0000
The phone is from the operator TIM Italy i will really appreciate if u help me to solve this insue.
Br,
Tito Millo
Standard ROM or Cooked One? Have you Used USPL before flashing?
D'rath
PS: I buyed a TIM Artemis for my girlfriend, I changed the ROM and no problems
Standar ROM yes i have tried to use USPL but no luck cuz phone doesnt turn on at all and i cant sync with active sync
Br,
Tito Milo