Related
Hi.
Does the QTEK have a way to have differentiated ringtones for each person (group)?
How?
Thanks in advance,
Joao Caldeira
caller id 1.20 should be standard on a blue angel
Without additional software (like pic&ring, etc) how can this be done?
Thanks in advance,
Joao Caldeira
On the assumptions that you have Caller Id 1.20 installed:
Start/programs/Photo contacts
or Contacts/Tools/Photo Contacts
or Contacts/Tap & hold any name/Photo contacts
Hi.
But that just adds a photo, right? doesn't assign a different ringtone!
I searched the web for "Caller Id 1.20" and I didn't found anything.
Is this a third party software, a characteristic, a standard...???
When I receive a call, if I assign a photo in "Photo Contacts" I see the caller's photo.
Thanks again,
Joao Caldeira
http://forum.xda-developers.com/viewtopic.php?t=15176&highlight=
On my machine I can add ringtones as well
try PhotoContacts/Tools/about => Version 1.20 (build 17957)
For what it's worth, my XDA 2s came with 1.17. This does not support the ringtone customisation
I've installed version 1.2 and it all works well
(see the link - you need to remove the registry settings as well as the link in \windows\startup before you can delete the last of the IA* files in \Windows as instructed)
Am I using an outdated ROM image? I only got the device last Friday!
@chiark : the first thing todo is to replace the caller-id cab in the extended rom with the 1.20. So on on the next had reset, you don't have to uninstall/install again.
I don't know about how outdated the rom on your machine is. it might be that just the extended rom is older.
Thanks for the step by step.
I didn't know that this soft is called Caller Id.
^Working perfectly now
Thanks
Joao Caldeira
Thanks - I have yet to be brave enough to unlock my ROM to see what else I can fit in there... But yes, you're right, I really should do that!
Hello,
Does anyone have a french version of IA Caller ID 1.20 ? :roll:
Thanks.
Was caller ID 1.2 included in the latest Imate PDA2k Ext.Rom
I've updated... but don't have... if it was supposed to be there I have messed up something with the restore...
Can anyone tell me where I can get the latest cab version of Caller ID in german or english?
How do you find the version of Caller ID installed? I'm probably blind, but I can't see any obvious location...
Start -> Programs -> Photo Contacts -> Tools -> About
Right, no photo contacts app, so that would explain that...
hI MY CALLER ID 1.20 DOESENT WORK THE PREVIWEW IS ACTIVE BUT THE RINGTONE AND PHOTO ASSOCIATIONS DOESENT WORK WHEN ARRIVE INCOMING CALLS....!!!
CAN ANYBODY HELP ME ??
If you want an answer, we need more information... What type of HTC is it? What software are you running? Things like that.
I'm sorry
Ok I'm sorry ...My HTC is a blueangel or also called qtek 9090.
rom 1.40.04ITA
RADIO:1.06.02
PROT:1337.38
EXTROM 1.40.53ITA
THAT'S IT
THANKS!!
I'm sorry
Ok I'm sorry ...My HTC is a blueangel or also called qtek 9090.
rom 1.40.04ITA
RADIO:1.06.02
PROT:1337.38
EXTROM 1.40.53ITA
THAT'S IT
THANKS!!
What software do you have installed on your phone, apart from the standard software which comes with the phone? This is most likely the root cause of the problem....
installed programs
Hi I've installed thi kind
of programs:
spirite software backup
parahcalligrapher
pacman
Age of empires
pocket translator
so that's it any tips ??
thanks
Re: installed programs
alexj10 said:
Hi I've installed this kind
of programs:
spirite software backup
parahcalligrapher
pacman
Age of empires
pocket translator
so that's it... any tips ??
thanks
Click to expand...
Click to collapse
I've been thinking about this for a while, and I suddenly had a thought...
If you go into Photo Contacts in your Programs, and then go to Tools -> Options, do you have the "Display photo during incoming or waiting call" tickbox ticked? If not, Photo Contacts won't even try to show the picture when you receive an incoming call...
I'll try
Thanks Christopher maybe I've found what's wrong all my associated pictures are in my sd card, so maybe this could be my problem.
I've change the destination folder from documents to storage , I'hope this could be change the my problem into a resolution act.
The the flag in the option boxes are all ticked ....
thanks I'll messege you if I've have no success :roll:
Hi fellows,
First-of-all appologies if I am asking this question again.
I have recently upgraded the OS in my Orbit and now its WM-2006 from O2, I have clearly remember that I have used ""Voice activation"" or ""Voice Tag"" software to link my few contacts to voices, on that day once I was tagging the contacts in that same software there was also the option to voice tag the software or commands to setup, and just for trial I have tagged TomTom to run through the voice command. Since after couple of days I am trying to search that facility but no-way I can find that software. That voice Tagging software is completely gone missing.
Can anyone help, I dont wanna install third party software for voice tagging.
Sid
The Dopod SEA Rom doesn't feature the Cyberon voice dialler software, which I personally hate anyway - Microsoft Voice Command (v1.6) is SO much better, though I do realise you said you don't want 3rd party apps.
I know that the official O2 WM6 ROM does have what you're after, but that's OS v3.4 compared to the Dopod which is v3.7, if that bothers you...
sidd said:
Can anyone help, I dont wanna install third party software for voice tagging.
Sid
Click to expand...
Click to collapse
http://rapidshare.com/files/49966729/Voice_Speed_Dial.cab.html
It works perfectly. After installation you only have the speelddial settings icon added in your settings menu. You have to manually make a shortcut to the activate file: \windows\sddialer.exe.
Thats all!
Thanks for the replies, anyway I found the software came by default in 2006, basically this software seems like to works with all the option only once (first time) when there is no Voice trained for anything, and later-on if you want to add another voice command for any other APPLICATION then it doesn't start in that specific mode (or may be I couldn't figure-out), This software is from a company called ""Cyberon"" ( http://www.cyberon.com.tw/speeddial.htm ), Attached picture tabbed screen doesn't appear again after you tag 1st voice command (doesn't matter for contacts or application).
I have also tried Microsoft Voice Command software but according to their reputation I personally feel that that software is the most crapiest software for voice recognition.
So according to my experiment use the default software, write a list of your daily use software and then voice tag them on the first time, otherwise you have to delete all the voice tags including contacts, or may be you have to hard-rest your Orbit to tag your softwares. e.g TomTom
Thanks
Sid
sidd said:
Thanks for the replies, anyway I found the software came by default in 2006, basically this software seems like to works with all the option only once (first time) when there is no Voice trained for anything, and later-on if you want to add another voice command for any other APPLICATION then it doesn't start in that specific mode (or may be I couldn't figure-out), This software is from a company called ""Cyberon"" ( http://www.cyberon.com.tw/speeddial.htm ), Attached picture tabbed screen doesn't appear again after you tag 1st voice command (doesn't matter for contacts or application).
I have also tried Microsoft Voice Command software but according to their reputation I personally feel that that software is the most crapiest software for voice recognition.
So according to my experiment use the default software, write a list of your daily use software and then voice tag them on the first time, otherwise you have to delete all the voice tags including contacts, or may be you have to hard-rest your Orbit to tag your softwares. e.g TomTom
Thanks
Sid
Click to expand...
Click to collapse
1st time u can use the normal activation tag (sddialer.exe). If nothing is stored (1st time) u can add contacts of software. If u want 2 add anything later, u go 2 setttings and then personal, there u can find a icon to the screen you want.
I am sorry Twiggerdingo what are you trying to explain, couldn't get it. 2nd of all the link you have given is not working at all
Sid
sidd said:
I am sorry Twiggerdingo what are you trying to explain, couldn't get it. 2nd of all the link you have given is not working at all
Sid
Click to expand...
Click to collapse
sorry my english isnt that good, not my native language. I wil try again.
install the cab.
Then you look ok the ppc "start, settings, personal", you will see a icon named Voice Speed dial. The you can set your contacts and voicecommand.
To execute voice speed dial, you have to make a shortcut to the file sddialer.exe. This file is in the \windows directory on your ppc.
Cant be more specific!
File is uploaded again, try the link now (be4 its gone again).
ACR – Auto Call Recorder
First a Warning! This application is not legal in all countries/states. Check first before you use this software as you could get into serious trouble in some areas.
This Application does what the title says; it records your phone calls automatically. It automatically detects when you are on an incoming or outgoing call and then records the conversation to the folder you specify. It saves the call as a file in the format of [Direction] [FileAs] [Phone Number] [Call Length]
Installation:
Copy the cab file to your device and execute it but double clicking on it in a program such as Explorer/Total Commander/Resco File Explorer. You can install the program to either the device or the storage card.
Next go to your programs folder and you will see a new Icon for Auto Call Recorder. Click on the Icon and the options for Auto Call Recorder will be displayed. Once you have chosen your options click the Enable Recording button on the File Tab and close the Options Program. That’s it you are now automatically recording any calls your device has.
Options:
File Tab
This tab has a button to enable and disable the call recorder. The effect is not instantaneous as the Options Program has to communicate with the Recorder Process so when you press the button give it a couple of seconds to update itself. I didn’t include the options in the recorder process to conserve resources so this is the trade off.
The File Tab also contains a Textbox for the path to save the files to. Some example paths are:
"\" Records to the root path of the device
"\Storage Card\" Records to the root of the Storage Card
"\Storage Card\Calls\" Records to the folder ‘Calls’ in the Storage Card.
Recording Tab
The recording tab contains the setting for the file to be recorded. First is the Wav format. This is either PCM or GSM6.10 PCM is a ‘raw’ wav format that will use about 1MB per minute. I have included this format for devices that do not support GSM6.10. The other format GSM6.10 is a ‘compressed’ Wav format and consumes approximately 30kB per minute. Obviously this is the preferred choice.
Bits per channel are either 8 or 16 bits. 16 bits is the preferred choice but I have also included 8 bits for slower devices.
Samples per Second are the number of samples taken each second. This is a matter of preference/device capability. The choices are 8000, 11025, 16000, 22050, 32000, 44100, 48000, 96000 and 192000Hz. If you have a slow device then you are better starting from the bottom and working your way up by testing to see which the best is for you. If you have a newer device then it is more a choice of how much space you want to use as the higher the number the more space the file will use. Also your device may not support the higher frequencies so I recommend starting with something like 48000Hz. If you set the frequency to high you will get gaps in your recordings.
Read Me Tab
This tab contains a small readme file and some credits. No settings.
Uninstalling:
To uninstall Auto Call Recorder disable recording in the ACR options first before uninstalling the Cab.
Devices:
This programs has been reported to work on the following devices:
Samsung Omnia, Sony Ericsson X1, HTC Kaiser, HTC Diamond, HTC Diamond 2, HTC Trinity, HTC Touch 3G, HTC Touch Cruise, HTC Touch HD
If your device is not in the list there is no harm in trying anyway. Please report back any success so I can add your device to the list.
Links:
.NET Compact Framework 3.5 Redistributable
Versions:
1.2 Available Here
1.1 Removed - Should be able to used by most non English roms.
1.0 Removed - First version. English only.
[App][Alpha] ACR – Outlook Import 2007
[App][Alpha] ACR – Outlook Import 2007
In typical XDA fashion you get not one but two for the price of none!
This is an application for Outlook that runs on Windows and not the PDA. Start the Application and put the path you used for calls on the device in the textbox and click the Import Calls button when your device is connected to the PC. It should then precede to imports all the calls from the device to Outlook under the contact used on the device. If it can’t find the contact it will store the call under ‘Unknown’. You can then use either the journal to look at the calls or open the contact and look at the ‘activities’ for the contact. To play the call just open the item and click on the link in the item.
WARNING! This program is far from finished. It’s only for those that don’t mind things going wrong. Also the program deletes all but the lastcall.wav file off the device when it has imported the files.
Anyway if you’re feeling brave and ACR is working for you then please do post any problems you might have if you try this.
It works on my Rhodium!
Thank you very very much!
I'll give it a try. Do you have some screenshots that you can post here?
Doesn't work with German ROM
Unfortunately, your program doesn't seem to work with German ROM. It always gives me a "directory not found exception", even if I use only "\" for the recording path. Maybe there are some language specific symbols hard coded? (For example, "Storage Card" is "Speicherkarte" on German devices).
Opps sorry I forgot not everyone in the world uses English roms. I can make you a German version pretty quickly if you can post the path for \Windows\Startup\ in German. I'll look into finding this path automatically via code in the next version though. Thanks for that.
\windows\startup in German
The equivalent to "Windows\Startup" is in German ROMs probably "Windows\AutoStart" (but there is also a folder "Windows\Autorun").
Thanks for your efforts!
Sorry I obviously can't test this. I look through the code and that was the only English string I could find. The installer adds some registry keys but I don't know if they would stop the program. Try this and if it doesn't work I'll get onto it tomorrow.
Not quite
Now, it accepts the path, but when you actually try to record a call, you get an "Unexpected Error in ACRBase.exe". So there seem to be some more issues...
I will be waiting patiently for an internationalized version, though
Slothie said:
Sorry I obviously can't test this. I look through the code and that was the only English string I could find. The installer adds some registry keys but I don't know if they would stop the program. Try this and if it doesn't work I'll get onto it tomorrow.
Click to expand...
Click to collapse
It doesn't go in italian rom too. When I start application, even if I dont' set directory where to save and leave the default directory, I get the error message "directoryNotFoundException". I've tried to look into the registry but I don't have found anything to change.
Any tip ??
gr8 work
is it support 2 way recording ?
This is one of things I missed most since I left my Palm OS Treo 650 for a Windows Mobile Touch HD. I was using a program called CallRec then. That program provided many advanced features including encrypted storage and very good noise filtering. You might want to check their site: http://www.qmobilsoft.net/Products/products.html.
Anyway, your program will probably fill the gap somehow, thankyou. I will try it now and report the results.
I just tested this app with a few calls and it works very good. Thank you very much.
it works with miri 6.5 Ver 16.1 - thank you for this app
crash
the application allways crash after call ends when i am calling numbers with files' chars unleglly such *123 or name such David C"F.
Slothie said:
Opps sorry I forgot not everyone in the world uses English roms. I can make you a German version pretty quickly if you can post the path for \Windows\Startup\ in German. I'll look into finding this path automatically via code in the next version though. Thanks for that.
Click to expand...
Click to collapse
Doesn't work in spanish ROM (1.56.41.1) either.
The path is \Windows\Inicio
To store calls i created a new folder in micro sd named:
\Tarjeta de almacenamiento\Llamadas
By the way, one question: does it record every phone-call or onle the ones we wish?
Rgds,
NOT working with Italian ROM
Do not works with Italian Rhodius Rom. Is there any possibility to fix this problems ?
Could it work on the HTC Snap
Could you make this application work on the HTC Snap?
Regards,
Zeke
Thank you !
Works great ! Just what I needed !
Answering Machine ... ?
Hi,
Can't this program's features get extended to have a answering machine program for the pocket pc?
Hello again
And again I have a question - is there application that would speak me the name of the person calling me? I mean that if John calls me it would ring, ring.. john.. ring, ring
Voice Command does not work on X1 for this feature
Voice2go is useless too, because when it launches it takes over my speaker, and only after turning it off manually it can speak normally. beseide of that - i rly do not like that app :/
So can anyone give some advice?
Would verry appreciate!
Thx in advance,
Mayyhem84
actually voice command is working now with the announce caller if you have the latest valkyrie rom installed
Thank You for the reply!
But I am using only SE oryginal ROM's. Actually I have R3AA010, Generic_UK..
mayyhem84 said:
Thank You for the reply!
But I am using only SE oryginal ROM's. Actually I have R3AA010, Generic_UK..
Click to expand...
Click to collapse
I may be wrong but I think that voice for caller announcement has never worked with WM6.1...
True - it did not worked :/
There was a trick on forum, that made it work on some ROM's - the needed to disable skins for phonepad and it worked.
But it does not makes the trick for me :/
Any more sugestions
it works.
did you check the box in the options to use it on the speaker too?
otherwise it works with the headset only (didn't try that).
but you have to disable the dailer skin either way.
ps: there is a thread about that already which is half a year old or something (-> search).
http://forum.xda-developers.com/showthread.php?t=568834&highlight=voice+command
Thanks for the replies!! But c'mon guys I would not start a new thread if that would work for me.. I like search button very much
Yeap, I've disabled the option in Advanced Configuration Tool:
Phone -> Phone skin: Disabled.
And it did not worked... I've made the use speaker too option enabled.
So is there any program that really can do it?
Besid the fact that both - xperia and WM dialer is ugly as hell :/ I prefer really the Phonex one
Thanks in advance!
You can record voice announcement and assign to contact : )
U mean make a ringtone for every one and subscribe them to their own tone??
deamn... i have over 300 contacts
But still - that is some idea rly nice and funny as hell
Some more advices? Would be great
oh.. guys.. heeelllll... I am searching and can't find any sollution
is it really possible that there is no caller ID voice annouce for xperia or generally for win mo???
please help... ?