Related
Here is the link of the new offical WWE Rom:
http://www.t-mobile.hr/firmware/UNI_TMO_TMO_HR_20041_200147_11700_WWE_Ship.exe
can you post screenshots and what's in it?
Sorry, but no i can't. I was just downloading the new rom.
A Response
Where and how did you hear about this?...
www.DesertedNJ.com
I had a Wizard and firstly T-Mobile released a German aku3.3 rom and a few months later somebody found a WWE rom on the Croatian T-Mobile site for my old device. Now, i have a Universal and i've seen that T-Mobile also released a German rom and i everyday checked the Croatian site and hoped the same would happen. Today i realised the new WWE rom is out.
I see
I see...what a find that must have been...I'm in the process of upgrading my Uni and I noticed that the Upgrade Utility App claimed that the Rom it would be upgrading is 2.0.... ? Isn't 2.0 WM6, I noticed that the thread title said Wm5 rom...I just wanted to clarify with you if this rom is WM6 or WM5...
www.DesertedNJ.com
eddy7496 said:
I see...what a find that must have been...I'm in the process of upgrading my Uni and I noticed that the Upgrade Utility App claimed that the Rom it would be upgrading is 2.0.... ? Isn't 2.0 WM6, I noticed that the thread title said Wm5 rom...I just wanted to clarify with you if this rom is WM6 or WM5...
www.DesertedNJ.com
Click to expand...
Click to collapse
Unfortunately, it's WM5.
thanks so fast looks cool to me
What is the version number and AKU of this new ROM please?
---
HI, any idea if this supports A2DP Bluetooth?
TQ
This is the fastest rom i've ever seen.
Thank You mate...
I've tried hundreds of Roms but i think i'll use this for a long time
Ram after soft reset is : 31,7 mb (with 2 Gb. Storage Card,without it it's 32,7 mb...
Storage after soft reset : 40 mb
Looks stable,it's early to say its stable ofcourse but very fast be sure...
cktlcmd said:
What is the version number and AKU of this new ROM please?
---
Click to expand...
Click to collapse
OS 5.1.465 (Build 15673.3.3.1)
It seems to be an aku3.3
Fast and it should be stable because it's official.
Could someone put more screenshots please! Is this AKU 3.5?
that's some great news. gonna try it and see how it turns out to be!
techx said:
HI, any idea if this supports A2DP Bluetooth?
TQ
Click to expand...
Click to collapse
Even the AKU2 does already support that....
i've tried this since my post (#2). so far, stable, fast and no hang-ups.
very good so far.
vinczetibor said:
OS 5.1.465 (Build 15673.3.3.1)
It seems to be an aku3.3
Fast and it should be stable because it's official.
Click to expand...
Click to collapse
thank you for letting us know.
techx said:
HI, any idea if this supports A2DP Bluetooth?
TQ
Click to expand...
Click to collapse
yeah it does but not as good as jwright's rom.
Has anyone tried this new ROM with a 4GB card? Can the camera application store directly to the 4GB Card?
---
cktlcmd said:
Has anyone tried this new ROM with a 4GB card? Can the camera application store directly to the 4GB Card?
---
Click to expand...
Click to collapse
Yes, but I already have over 2GB data on it
Eelco
My Stripped Rom originally Crashed w/ KarhU's Benchmark Test.
I think these Roms were built w/ HyperCore's xx_os.nb which also crashed KarhU's test.
Which in both cases may have been the result of not deleting the OEM_FLASHDRV.DLL
I have since followed matts suggestion:
mattk_r;1750790 said:
Make sure the OEM_FLASHDRV.DLL from the OEMDrivers is removed first. I think it's what made the difference.
Click to expand...
Click to collapse
(As an Extra precaution; I used matts xx_os.nb.)
After that, I ran SPB Benchmark two times on my stripped version, and it ran all the way thru without a crash.
Roms Removed Jan. 02, 2008
I won't be re-posting these Roms.
Instead I will be working with My rebuilt Schaps 4.01 Lite
In which ICS is now Working:
Link - Rom: Schap's WM6 4.01 Lite (With Internet Sharing!)
Once I clean it up, then I might repost a Merged ExtRom Version (SuperStorage)
Schaps 4.01 Roms without the Ext Rom!
Stripped From 4.01 Full:
Adobe Flash Lite
Calculator
Mobile Power Point
Streaming Media
Task Manager
Windows Live Messenger
Windows Update
Spb Benchmark index 364.25
CPU index 1400.59
File system index 156.26
Graphics index 1175.25
Note:
No Splash Screens - So you'll still have the Splash from whatever Rom you flashed last.
Unless you http://wiki.modaco .com/index.php/Custom _Hermes_Splash
I ran Schaps 3.54c w/o Ext Rom for almost 2 months and never had any issues.
It ran just as good as the one with the Ext Rom.
So I did the same for the 4.01's
If you feel the desire to donate, give it to either Schaps, Matt, Bepe, Tadzio or even KarhU, for making sure the cooks only give you the best.
(If I forgot anyone, please forgive me. I just mentioned the ones who I first thought of.
Please Post comments like:
'Downloading Now' or 'You Rock' or 'Can I put this on my Treo?'
Pic is from Lite Rom.
Can I put this on my Treo?
...no.
This is the hermes section
venelar said:
...no.
This is the hermes section
Click to expand...
Click to collapse
Your Point?
another link plz, beside rapidshare
berdinkerdickle said:
Your Point?
Click to expand...
Click to collapse
nevermind.
venelar said:
guy asked about putting this on a treo. read the post under you
Click to expand...
Click to collapse
Oh,
Yea, I think he was just being funny
venelar said:
nevermind.
Click to expand...
Click to collapse
Honest Mistake
Thanks dude, currently running 4.01 with some apps in extended rom, this is perfect. Been running 4.01 for a few weeks now and it is solid.
Had some problems with previous bigstorage roms (freezing) will report back if any problems.
Nice thing is I can just go back to 4.01 standard with a backup file if required.
thanks :-D
Russ
Amauta said:
Can I put this on my Treo?
Click to expand...
Click to collapse
I hope you mean store a copy of it on the storage card for your treo that you later plan to flash to your Hermes
The 'full' download is corrupt, tried to download twice
when extracted with winrar:
! C:\Downloads\Schaps_Full_401-ExtRom.rar: CRC failed in RUU_signed.nbh. The file is corrupt
Can you please reupload or explain what I am doing wrong?!
cheers
Russ
I'm sorry,
I tested the Lite, I should have also tested the Full.
I will try and upload one that works later tonight.
That's a lot of memory free
Any chance you could do the same with Schaps 4.22? I'd have no idea where to start
??? Schaps 4.01 ???
After flash your ROM, in the About in Setings i have:
[size=+1]CE OS 5.2.1620 (Build 18533.0.7.0)[/size]
In the Schaps thread (ROM 4.01)
schaps said:
Release notes:
Changed operator name display rules
[...]
Startup animation moved to Extended ROM (saves 800KB of storage)
Main features:
WM6 version 5.2.1933 build 18533.0.7.0 [NEW]
[...]
All bugs from the previous versions should be fixed!
OEM applications:
Camera app 4.0.28276
[...]
VoIP Settings 0.9
Click to expand...
Click to collapse
Why your ROM presents a different OS and a Build ??
RanDomIze said:
...clip...
Why your ROM presents a different OS and a Build ??
Click to expand...
Click to collapse
It might be the xx_os.nb I used.
Don't know if that's a bad thing, good thing, or otherwise.
Either way the Rom works great for me.
Can you explain how you did?
Tried to do to 4.22 but I have errors
Sorry Guys
I am having ridicules internet trouble.
I am going to give up on trying to upload a fixed Full.
Here is all I did to get rid of the Extended_Rom
Get the Ruu_signed.nbh
NbhExtract to NbDump (Tadzio’s Tools)
Replaced Schaps xx_os.nb with Bepe’s (rename if needed)
And then NbBuild.
Used Dutty’s ‘Nb to Nbh.’
And then Flashed.
That’s the simple way, and it worked for me first time.
I actually did a lot more after that to fix shortcuts that pointed to ExtRom, and moved contents of ExtRom to xx_os.nb.dump.
And if you really want to clean it up, you can edit the Registry to reflect changes.
no worries, I stick with 4.01 standard for now.
Added to 1st Post My Stripped Version of 4.01 Full
(Internet Sharing Works)
What did you strip and what did you leave from the full? I don't use all the apps in it but like having some available 'just in case'. Sorry - just after spending so much time flashing and reinstalling recently I don't want to reflash just to see what is there. If you don't have time to let us know don't worry about it. cheers Russ
At the moment there are 3 roms which seem similar,
NEW ROM: MDA-PRO offcial AKU3.3 ROM with SDHC support (from swat4)
[08 11 2007] (Vanilla) Debranded WM5 AKU3.3 T-Mob rom (from PsiDOC)
New Rom!! [21/12/2007] Final Release. PsiDOC's WM5 AKU3.3 Matrix Edition
I am trying to choose the one which works the best, but was wondering if each one is a vanilla ROM or what extras each one has, if any.
They all seem to use the AKU3.3 ROM. Is there much difference between them and is it possible to use the swat4 SDHC Support with the PsiDOC roms as I have a 4g SDHC card which I would like to use
I have been using the WM6 Beasty Leo 2.09.01 which is good but does not seem as reliable as WM5, and since they have stopped working on it WM5 seems more attractive, if less flashy.
Anybody please
I advice you the unbranded version by PsicoDOC
alex783 said:
I advice you the unbranded version by PsicoDOC
Click to expand...
Click to collapse
Tahnks for the reply, do you mean this one
[08 11 2007] (Vanilla) Debranded WM5 AKU3.3 T-Mob rom (from PsiDOC)
rather than
New Rom!! [21/12/2007] Final Release. PsiDOC's WM5 AKU3.3 Matrix Edition
Any special reason you picked that one
I tried both of them, the matrix edition and the new rom with sdhc.
i actually have this last one, they are both the same, but the psidoc's one is more pretty, but it doesn't have the sdhc support.
i'm customizing the second rom...
Calcu said:
I tried both of them, the matrix edition and the new rom with sdhc.
i actually have this last one, they are both the same, but the psidoc's one is more pretty, but it doesn't have the sdhc support.
i'm customizing the second rom...
Click to expand...
Click to collapse
Thanks for the reply. What are you doing to customizing it? You will have to let me know when you finish the customizing and let me have a try of it.
I'm using WM5 AKU 3.3 by HELMI
Icon and WaitingIcon is WM6 looks...
Also Bootscreen...
Well, i've put on the
MDA-PRO offcial AKU3.3 ROM with SDHC support (from swat4)
and it works fine, the 4g memory card is recognised with no problems. See how it goes from here.
I flash Swat4 ROM with SDHC support, i partition my 8GB SDHC to 2 partition as Swat4 mention, it only can recognized 1 partition only. If no partition, also can recognized 4GB only.
But i flash MWANG wm6.1, it can recognized 2 partition. Anyone can use MWANG wm6.1 SDHC file to replace in Swat4 ROM ? To try can WM5 to recognized 2 partition or not !
Thanks in advanced !
Cheers,
where can i get these rom? very new to the whole pda thing
desertcolt07 said:
where can i get these rom? very new to the whole pda thing
Click to expand...
Click to collapse
desertcolt07, look here further down this thread to page 2 for
NEW ROM: MDA-PRO offcial AKU3.3 ROM with SDHC support or use this url to go there
http://forum.xda-developers.com/showthread.php?t=356760
ok, i have nk.nbf, what the hell do o do with it?
Hi
If i flash Windows 6.5 ROM available in this Hermes forum to my hermes (JasJam) and i do not like to keep WM6.5 and want to go back to 6.1ROM.
Is is possible to Flash WM6.1 ROM ?
Can any one answer it clearly about this.Thanks
Yes you can.... If you have Hard SPL V7 then use the SD card method to change rom.
Before you do though, try out Tai_SW's 21109 wm6.1/6.5 hybrid. It doesn't have the titanium today addon or the hexagon app menu. Very quick and no real problems. Pretty lite rom with a large amount of storage space and ram, no games.
Cheers...
Thanks.. i searched but i think the 21109 v10 gloden globe links are no longer there
someone has this in signature and search result no longer provide links
GoldenGlobe V10 by TAI (5.2.21109)
can you post link please for downloading thread?
thanks
Search it here:
http://forum.xda-developers.com/showthread.php?t=461680
as for the Golden Globe:
http://forum.xda-developers.com/showthread.php?t=458456
HTH
Not Golden globe, I believe that is similar to a lot of the newer ones. It was just 21109 wm6.5.
Gypsygirl13 gave you the link, the first one.
Heres the link to the rom I'm using - http://www.4shared.com/file/83529289/5673e8c6/V5_Lite2G.html
and the 3G version - http://www.4shared.com/file/83559388/92966e77/V5_Lite3G.html
Cheers...
Thanks ultra..
ultramag69 said:
Yes you can.... If you have Hard SPL V7 then use the SD card method to change rom.
Before you do though, try out Tai_SW's 21109 wm6.1/6.5 hybrid. It doesn't have the titanium today addon or the hexagon app menu. Very quick and no real problems. Pretty lite rom with a large amount of storage space and ram, no games.
Cheers...
Click to expand...
Click to collapse
can this be done without hardspl..? coz my device already been hardspl before..? do i have to hardspl again before flash it back to 6.1..?
i'm always using sdcard method to flash roms, coz it's lot easier than using activesync, and less brickable (cmiiw)
thank you
METALWORKS™ said:
can this be done without hardspl..? coz my device already been hardspl before..? do i have to hardspl again before flash it back to 6.1..thank you
Click to expand...
Click to collapse
If you have hardspl installed, then you never have to install it again. You can flash any hermes roms. Happy Flashing
I dont see why you would want to come back, but if you for some krazy reason decide to come back... yes its possible.
I'm running a pretty stable, but older version of CRC's rom. I'm thinking about upgrading to one of the 6.5s and have a few questions for those who have been more adventurous than me.
Are the 6.5 roms stable?
Do they seem slow on our long in the tooth hermes?
are there any that have "timed" themes for volume? Example is SPB's solutions that allow you to say "Vibrate" --> for x configured times or any custom time.
Oh - and can these be installed via the SD card method? or direct USB only? I don't think i saw any that mention anything about the SD card. I haven't ever done an upgrade via this method - so don't know if that's been the established standard by now. I do have Hard SPL.
Are there any gotchas?
I've been doing a lot of browsing and window shopping reading through all the different roms threads - but it's just getting waaay too much to try figure out.
any input would be greatly appreciated.
My Hermes has struggled with 6.5 ROMs. Compared to Schap's and CRC's 6.1 ROMS, I have found it to be frustratingly slow.
You can flash them via SD card, no problem at all.
If you want really stable ROMs with everything just working, I'd recommend a 218xx build, which are the official 6.5 release builds. The newer 23xxx builds are more finger-friendly (originally intended for capacitive screens), but still beta and thus have some bugs.
Time has come said:
My Hermes has struggled with 6.5 ROMs. Compared to Schap's and CRC's 6.1 ROMS, I have found it to be frustratingly slow.
Click to expand...
Click to collapse
did you eventually roll back to a 6.1 ? have you tried one of the ones based on the 218xx build like livven suggested?
Livven said:
You can flash them via SD card, no problem at all.
If you want really stable ROMs with everything just working, I'd recommend a 218xx build, which are the official 6.5 release builds. The newer 23xxx builds are more finger-friendly (originally intended for capacitive screens), but still beta and thus have some bugs.
Click to expand...
Click to collapse
cool thanks!
My experience of sluggish 6.5 ROMs is based on the 23XX builds. It sounds like it might be worth trying a 21XX but I've just gone back to 6.1 and lost my appertite for flashing for the moment.
I've tried many 6.5 ROMs. I found that TAI ROMs are awesome. You could see the screenshot:
http://forum.xda-developers.com/showthread.php?t=458456
Speed & stability is good too.
I prefer the SD method. The easy way. Just rename the rom to HERMIG.nbh and copy it to SD card. Flash it. After finish flashing the rom, hard reset it.
That's it done.
kay2264 said:
I prefer the SD method. The easy way. Just rename the rom to HERMIG.nbh and copy it to SD card. Flash it. After finish flashing the rom, hard reset it.
That's it done.
Click to expand...
Click to collapse
Sorry mistyping, the correct one is HERMIMG.nbh
Manila2D is still somewhat buggy and slows down the device very much, especially the new 2.0 versions from the HTC Mega.
But try it yourself, everyone has different preferences!