hi,
Ive flashed my rom to SwiftBL 4.0 and radio to 1.00.25.05.
There are two thing I would like to ask please;
#1 I get this message when I start the phone "dialed:
the answering modem has disconnected. to check your connection settings and change them if needed, tap settings [settings/dismiss]"
#2 bluetooth icon doesn't appear on the status bar. it receives and sends files but not visible.
how can i sort out these two problems please?
thanks
Edit/Delete Message
Related
Hi,
I am kind of new here and I allso did a search on this forum for my problems but I did not find anything about it...
Here is my problem:
When I try to enable Wireless trough START---> SETTINGS ---> CONNECTIONS--->WLAN
I see the checkbox "Wireless LAN ON"
When I check that ...the MDA starts thinking ...and it returnes to the previous screen ...
When I go back and klik on the WLAN icon again I see that it has disables itself again...
How is this possible?
Thanks for the answers...
Here is MY DEVICE INFORMATION:
ROM VERSION = 1.06.00 ENG
ROM DATE = 08/05/04
RADIO VERSION = 1.00.00
PROTOCOL VERSION 1337.30
ExtROM VERSION = 1.06.118 WWE
Is this new or old?
Thanks,
I will try to help but I am sure someone will be able to help more.
If you click on your WIFI connections, on my MDA 3 it is on the bottom right of the today screen, or by going Start>Settings>Connections>WLAN it will bring the WLAN window up.
On here you can click to turn the WLAN on as you said however at the bottom their is a tab for settigns if you click on here it will bring up about your battery life and below that to turn WLAN off automatically.
Mine was already on by default and I had this problem until I noticed this so you may to check this and turn this off.
Hope this helps.
I have CE ROM 1.33.10 with Radio 1.06.02 on my PDA2K and have to admit that I get the same issue when trying to "hot-switch" sometimes. To resolve it, I attempt a switch to WLAN, and when it doesn't work, I perform a soft reset. At bootup, it remembers that I wanted to establish a Wi-Fi connection and automatically connects from there.
So, it's not really a "hot switch" but a "reboot" into the correct configuration. Hope that helps.
Similar problems...sure would like a solution
When I want to connect to WLAN I check the box, close the app and wait. Unfortunately it often does not connect. When I reopen the app the "Wireless LAN ON" check box is automatically removed! Repeating this does not solve the problem. It seems the only way to get it to work is a soft reset which fixes things - ugh. I do keep the check box "Auto turn off WLAN if not connected" checked which does not seem like it should interfere.
Hi all -
First of all, this isn't a "Help - a ROM upgrade killed my baby" post.
All (seems) to be working just fine, and I'm getting email pushed to me very happily (hurrah).
I do, however, have a question about the connections settings, which I'm hoping other UK users can help me with.
I've set up the gprs/umts connection to use access point "general.t-mobile.uk" as my device previously had. I've set the username / password to user /pass, as I found out doing a quick search.
My problem is, though, that whilst the (U) symbol is shown, my connection rate is ridiculously slow (like treacle).
Are there any other settings I should be reviewing? Is that username/password correct?
Thanks for any suggestions
BT
Okay - having rebooted the phone, I'm unable to make a data connection at all. Is this a known problem? Is there an issue with this radio stack (1.0.9) on T-Mobile?
the i-mate rom have wrong settings for t-mobile UK in MMS and data.
You need to set them up manually.
Best way to do it is read the manual on t-mobile site.. it has a step by step guide.
I did that and it worked..
the settings you might have found using google search on 3rd party sites don't work, I tried that already
battletank said:
Okay - having rebooted the phone, I'm unable to make a data connection at all. Is this a known problem? Is there an issue with this radio stack (1.0.9) on T-Mobile?
Click to expand...
Click to collapse
Password is incorrect for the UK.
User: user
Password: wap
Goodday to all,
I have update my HTC P3300 to WM6.
When i go to the Com Manager and i selected the settings and push the button wireles i get a wrong settings for excample i get the bluetooth settings.
The same when i selected the phone i get the wireless settings.
So the text doesn't attached to the write program.
Does other have the same problem when updated to WM6 and what is the solution to fixed this???
Thanks in advance and Kind Regards
Davidoff
Used the ROM of Don Salari -3/8/10. Applied Tachi Disabler, Installed Cab for Original HTC Phone. Now the ringer does not give any sound. I cannot also call from the Contacts after selecting a contact. Applied the original cab for Quick GPS, but it cannot download the update, says connection error. Using Activesync, is updating the weather properly, only QuickGPS, not updating.
Kindly, someone pls help on the matter
Thanks
Mice
Hello, using OpenSEMC (4.2.2) firmware, and it's seems i cannot register on network if i go to settings - mobile network. It's show's available networks, but i can't register. It's show's message that registering on network, but after some time it throws message that cannot register, try again later...
Tryed two sims card's - Omitel and Bite (These two are lithuania networks). Same problem. On CM9 everythink works fine. I think it's a ROM based problem, not my providers. Is there any way get more detailed error message, so it would be more clear where to search problem, because this message doesn't say any specific regarding my problem... (Maybe debuging would help?)
NetworkQueryService seems working, but problem exist, even if i restart phone, sometime's it select my network and full bars come's up (problem described above still exist, no matter what), but sometime's it's not, and i have restart phone several times...
Any help ?