Hi guys i have a problem
I can access different function through the MANUAL KEYS like settings, wireless , sound , display, and all the programs, but digitizer itself seems to be frozen.So i was wondering what is most common problem for that i presume flex cable or digitizer but digitizer is in good condition so what can it be ?
So cable 1 or 2?
1.http://www.ebay.com/itm/SLIDE-SLIDE...246?pt=LH_DefaultDomain_0&hash=item1e708e88f6
2.http://www.ebay.com/itm/New-Replace...363534?pt=PDA_Accessories&hash=item1c299ee54e
I had damaged flex cable, and touch screen was still working, but screen was showing TV static all the time.
PS: This link
http://www.ebay.com/itm/SLIDE-SLIDE...ultDomain_0&hash=item1e708e88f6#ht_1606wt_952
Second one is analog touch cable.
To me digitizer doesnt work but analog works ?Which cable is that?
anyone?
whenever I slide out my gamepad my phone does not change the screen mode from portrait to landscape, neither does the xperia play launcher starts or the screen gets unlocked.
sometimes the screen automatically changes the screen mode from portrait to landscape as if the gamepad has been slid out when it isn't.
also games like PES 2012 don't detect the gamepad anymore used to work earlier.
what is the exact problem?
I asked a local mobile repair shop and he says strip of slider (flex cable) must be changed but it isn't available anywhere in my area. if this is correct then I may order the flex cable online.
what do you guys have to say?
To the OP:
My replacement glass+digitizer didn't have adhesive behind the connector like the original so every time the phone would take a hit the screen would go blank. I'd have to take it all apart and reseat the connector. Sometimes the cable that connects to it would twist out a little bit on its own during reassembly and I'd have to do it again. Not I use precisely cut tape or hot glue when I do one (careful of the slide rails). Though my problem usually manifested as a blank screen, twice it manifested as an unresponsive digitizer.
I'd check my connection first.
bodygaurd said:
whenever I slide out my gamepad my phone does not change the screen mode from portrait to landscape, neither does the xperia play launcher starts or the screen gets unlocked.
sometimes the screen automatically changes the screen mode from portrait to landscape as if the gamepad has been slid out when it isn't.
also games like PES 2012 don't detect the gamepad anymore used to work earlier.
what is the exact problem?
I asked a local mobile repair shop and he says strip of slider (flex cable) must be changed but it isn't available anywhere in my area. if this is correct then I may order the flex cable online.
what do you guys have to say?
Click to expand...
Click to collapse
I responded to your PM. Yes, all the parts involved are available online. The slide board has two metal fingers inside a rail/slot that the bracket joining the two halves slides in. I don't know what the second one is for because all functions seem to react to the first one making or breaking a connection, but it could be causing the problem just as easily. These springy conductive fingers connect through the same flex cable as the switches that the face buttons press (Back, Home, Menu, Search) using some kind of conductive adhesive backing. That part is only a few bucks online, so it may be worth replacing just that to see. Unfortunately, the slider assembly is expensive (at least $20) but the slider + earpiece/camera + slide cable + switches is a comparative value at only a few bucks more.
Recently, I disassembled my Sony Ericsson Xperia Play R800at. I was replacing the housing and digitizer. All went smoothly until I missed an important step. There was a black tab that holds down the flex cable that connects to the digitizer. I forgot that step and my flex cable ripped.I have ordered another as a replacement. I understand that this will cause the digitizer to not work, but I have more issues, and I want to know if they are due to the missing cable.(the ripped flex cable.) I assembled the phone and the screen functions normally. As to be expected, I can't interact with the screen. However, Now my search button and settings buttons aren't functioning. My home and back buttons are working although. Also, My phone will not charge anymore. Is this due to the missing flex cable? I hope I didn't accidentally screw anything up. I was really careful, so I don't know why they won't function. I really hope that these issues are due to the missing cable. :silly:
Sorry, I am not allowed to post links.It has the camera and earpiece on it and is attached to the slider. :"(
How. Could u miss a step itsm really easy to take apart and put together its the flex cable garunteed
Sent from my Sony Tablet S using xda app-developers app
Tutorials
Most of the tutorials seem to be only of disassembly. Little to none are of reassembly. I wrote down a list and reversed the order, but as it got closer to assembly, I started to assemble it myself. Big mistake. I assumed the black tab was only there to hide the chips.
Charge Recognition
It actually can charge, but only when the phone is powered of. This must be due to the missing components. Maybe because some parts of the phone aren't connected, the phone will not recognize the charger when powered on. What a relief...:angel:
Just watch dissassembly in reverse
Sent from my Sony Tablet S using xda app-developers app
I got the replacement part. I even replaced the slider. I transferred the button cable to the new slider along with the main flex cable and the camera/earpiece flex cable. I am confused. I am inserting the flex cable into the digitizer slot, but it isn't working. I assumed there was a lock mechanism of some sort, but still no luck. I am not sure why it isn't going all the way in. Reversing the steps just isn't working. Placing the flex cable in is way harder than taking it out. Is there a certain way to place this cable in. What I am in need of is a picture of how a functioning digitizer's attachments look. Are you supposed to be able to see the golden tip of the flex cable?(Again, I am speaking of the flex cable with the black tab covering it. It is very small.)
:crying:
Lock.
There were locks for just aboul all the ZIF Connectors. Sony Ericsson's manual is the best!:good:
I tried again using the locks on the slots but it still wont work. Even with the manual, no luck... Now, it is charging normally, even while on. This indicates that something has changed. I wonder why the digitizer isn't working though. Maybe I should see what happens If I revert back to my old digitizer...
Hello!
So I've been an idiot. I tried to replace the broken USB charging circuit - which went fine. Until I discovered the volume buttons' connectors just dangling there. To my horror I forgot the volume key having no connector, but actually being soldered onto the motherboard.
I thought I could re-solder, but I managed to rip off clean the connectors, much like in this picture: http://imgur.com/Hg1in1Z.
Note the two on the right. All three came off clean like that.
Can I fix it?
I can change the volume using the software fine, but this seriously will make going into recovery a LOT harder.
Is it possible to boot straight into recovery from the device being off but charging via USB?
Is it still safe to let CM11 handle the updating process for which it boots into recovery itself, installs and then reboots?
I feel stupid for forgetting the only thing I could actually permanently damage, since everything else is a connector.
RainbowSwag said:
Hello!
So I've been an idiot. I tried to replace the broken USB charging circuit - which went fine. Until I discovered the volume buttons' connectors just dangling there. To my horror I forgot the volume key having no connector, but actually being soldered onto the motherboard.
I thought I could re-solder, but I managed to rip off clean the connectors, much like in this picture: http://imgur.com/Hg1in1Z.
Note the two on the right. All three came off clean like that.
Can I fix it?
I can change the volume using the software fine, but this seriously will make going into recovery a LOT harder.
Is it possible to boot straight into recovery from the device being off but charging via USB?
Is it still safe to let CM11 handle the updating process for which it boots into recovery itself, installs and then reboots?
I feel stupid for forgetting the only thing I could actually permanently damage, since everything else is a connector.
Click to expand...
Click to collapse
If that is the picture of your circuit board then it appears that you may be in for some bad news. What you have actually pulled off is the pads that make connection to the circuits. Without those pads intact you will not be able to get a connection and therefore will not be able to salvage your volume buttons. I am not an expert however I have a few years experience soldering small electronics for an automotive supplier and we would scrap any board that had the pads pulled off. Oh and don't beat yourself up too bad, those pads are very easy to pull off, it just sucks that it happened on your GN.
ThePhantom97 said:
If that is the picture of your circuit board then it appears that you may be in for some bad news. What you have actually pulled off is the pads that make connection to the circuits. Without those pads intact you will not be able to get a connection and therefore will not be able to salvage your volume buttons. I am not an expert however I have a few years experience soldering small electronics for an automotive supplier and we would scrap any board that had the pads pulled off. Oh and don't beat yourself up too bad, those pads are very easy to pull off, it just sucks that it happened on your GN.
Click to expand...
Click to collapse
It's not my picture, but does represent the damage quite damn well. I tried finding ways to solder broken pads and there was only hope if leads were visible, which are not for this board (except for ground). I think I am out of luck this time.
Thanks for the fast reply!
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
http://www.witrigs.com/media/catalo...a71cb48e3d52cb890e76f9e6353/1/0/109063-01.jpg
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
bookfast said:
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
http://www.witrigs.com/media/catalo...a71cb48e3d52cb890e76f9e6353/1/0/109063-01.jpg
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
Click to expand...
Click to collapse
Hey there. Interesting to know that you replaced it all your self . Did you put everything back perfectly ? I mean the display being aligned properly to the body, the speaker grills being flushed with the body; ? Weird to ask, but did you damage anything while doing it all yourself ? Like the screen scratches, or something else ? Sorry, for asking these... Thanks in advance :good:
Tej XFire said:
Hey there. Interesting to know that you replaced it all your self . Did you put everything back perfectly ? I mean the display being aligned properly to the body, the speaker grills being flushed with the body; ? Weird to ask, but did you damage anything while doing it all yourself ? Like the screen scratches, or something else ? Sorry, for asking these... Thanks in advance :good:
Click to expand...
Click to collapse
I haven't re-glued the speaker covers back on yet so I dont know if they will be perfectly flush or not, although they still look flat so I think it will look good.
The only damage is a slight bend in the frame on the screen side of the sim tray slot. The metal is thin, and I pried against it to get the hardware out of the frame. That is why I recommended to start from the bottom when separating the two. Doing this should allow others to avoid this problem. It is slight, maybe 1/4mm gap where it used to be flush along the side of the screen above the sim tray.
Otherwise everything was smooth. The screen/frame etc are still mint.
bookfast said:
I haven't re-glued the speaker covers back on yet so I dont know if they will be perfectly flush or not, although they still look flat so I think it will look good.
The only damage is a slight bend in the frame on the screen side of the sim tray slot. The metal is thin, and I pried against it to get the hardware out of the frame. That is why I recommended to start from the bottom when separating the two. Doing this should allow others to avoid this problem. It is slight, maybe 1/4mm gap where it used to be flush along the side of the screen above the sim tray.
Otherwise everything was smooth. The screen/frame etc are still mint.
Click to expand...
Click to collapse
Cool, you've done it like a pro then. :good: .Any picture describing the damage would be helpful, if you can provide. Is the display mint ? No scuffs/scratches on it ? But, my speaker grills were damaged onto the edges after the repair was carried out. Does yours show the same sign ? I don't mean the flatness of the grills, but the damage that should be done, while prying out the grills. A picture showing your damage would be helpful to me. I could do the same, if you insist. Thanks ! :good:
Mine is busted. But I cannot find the PCB. The link in the op is dead.
Any ideas?
http://www.witrigs.com/oem-charging-port-flex-for-htc-one-m8
bookfast said:
http://www.witrigs.com/oem-charging-port-flex-for-htc-one-m8
Click to expand...
Click to collapse
I actually got one off eBay for $17.21. Works perfectly.
Just wondering....
Sounds like you were able to avoid some steps in the teardown guide, if I recall it was damn near a total disassemble. Do you have a lot of experience with phones? I want to fix mine, but don't need a tedious project right now. If I repair mine I'd like to put a mini USB in place of the micro if possible, I've seen too many damaged micro usb to trust or like them. As for the speaker grills, if you're picky buy replacements, they're cheap.
microphone on charging port?
bookfast said:
Hey all,
I just replaced the charging port on my m8 and wanted to let people know it is straight forward. My port got corroded and was shorting out, melting the adapter and not charging the phone. I sent it in hoping for warranty, but the replacement quote was $400! (due to S-off they "had" to replace the entire motherboard). The phone has a separate pcb with the micro usb charge port and headphone input.
example:
link
To remove this board you need to do a few easy things:
1) disconnect the ribbon and remove the insulating tape (to reattach to new part)
2) unsnap the small white power cable
3) loosen the screw on the motherboard near the headphone input. This is clamping down the assembly a bit
tools required:
phillips 00
t5 torx bit
spudger/guitar picks
I would recommend prying the phone out of the frame starting from the bottom. I started from the top and bent the thin strip of aluminum above the sim slot when prying it out.
Also, you can pry the bracket/spring off the top of the old usb port to give the new one a tight fit if your replacement didnt come with it (like mine)
Lastly, just note that power button fell out as soon as I pried the frame apart from the guts. This made it a bit of a pain to reassemble - just be sure to reassemble with the top in first. That will keep the power button in place.
The replacement part cost me $30, so it was definitely worth it! phone now works great.
Click to expand...
Click to collapse
My HTC M8's main call microphone has stopped working, and through searches on Google it seems that perhaps that this mic (first mic, non-speakerphone mic) is built into the charging port. Is this the case? I cannot find anything that explicitly says this, and I'd love to get the phone back in working condition.
dm8233 said:
My HTC M8's main call microphone has stopped working, and through searches on Google it seems that perhaps that this mic (first mic, non-speakerphone mic) is built into the charging port. Is this the case? I cannot find anything that explicitly says this, and I'd love to get the phone back in working condition.
Click to expand...
Click to collapse
I too am also curious if the mic is on the usb part because my mic doesnt wrk when i make calls.
Will replacing the usb port fix the problem?
Harvey02 said:
I too am also curious if the mic is on the usb part because my mic doesnt wrk when i make calls.
Will replacing the usb port fix the problem?
Click to expand...
Click to collapse
I called HTC, the mic is on the USB port, although you should make sure that it's not a software issue first. There are several threads on the internet easily found through Google which discuss doing a factory reset to resolve this if it turns out to be a software problem.
Thanks for your reply. I did a factory reset when I got the phone but it still doesn't work. Does that mean it's not a software problem and that if I replace the usb it should work?
Harvey02 said:
Thanks for your reply. I did a factory reset when I got the phone but it still doesn't work. Does that mean it's not a software problem and that if I replace the usb it should work?
Click to expand...
Click to collapse
I would think so, yes.
Thanks! Do you know of any online source confirming that?
Harvey02 said:
Thanks! Do you know of any online source confirming that?
Click to expand...
Click to collapse
No, but from what I've studied about it, it should work. Feel free to contact HTC, they actually have a live chat available somewhere on their website. Good luck to you.
Very interesting, I contacted htc and we went through diagnostics together and the rep said that I have to send it in. I asked him if the mic was on the usb assembly and he said that it wasn't and rather it was on the motherboard, and I clarified that we were talking about the primary mic which is located near the usb port. Confusing bec everywhere I saw online said that the mic is on the usb assembly. Go figure!
Harvey02 said:
Very interesting, I contacted htc and we went through diagnostics together and the rep said that I have to send it in. I asked him if the mic was on the usb assembly and he said that it wasn't and rather it was on the motherboard, and I clarified that we were talking about the primary mic which is located near the usb port. Confusing bec everywhere I saw online said that the mic is on the usb assembly. Go figure!
Click to expand...
Click to collapse
What did you end up doing? Did you discover if it was on the motherboard or the part with the USB port? I've waited a while to repair mine for other reasons, and I am now prepared to fix it. Any information would be helpful.
Just a few notes on my own experience.
I replaced the screen in my friend's M8 a few months ago. Seemed like everything went ok, except after I got done, the mic didn't work anymore. This is strange because it worked fine before, and all I did was remove/replace the circuit board in the process (yes, the small one at the bottom with the uUSB port). However, the upper rear microphone was still working I believe, because people on the other end of the line could still hear if the phone was put into speakerphone mode. I don't know why it would stop working all of a sudden.... Ran the HTC audio test using *#*#3424*#* to confirm main mic wasn't working and that the aux rear mic was.
Fast forward to this week, with my own M8. The uUSB connector was going bad, and I was having trouble charging, so I figured it was time to replace that circuit board. Ordered a new one and replaced, but when I got it back together, the USB port was fine of course, but my mic wasn't working now, just like my friends! On top of that, the headphone jack didn't work at all. Most likely the "cable inserted" signal wasn't getting back up to the motherboard, but didn't check. So pissed off. Also, the new board I got didn't have the bottom left RF connector/circuitry populated. Thinking from research that it might be for the GPS? I should have tested when the board was in there, but didn't. Fixed a bad solder joint on the original board's uUSB connector, which helped, but still charging is a bit messed up. I'd rather have a working mic and headphone jack and have to play with the cable to get to charge for a while until I get another board (from another supplier, jerks).
Yes, the mic is the small chip on the very left side of the board. It has a hole underneath the chip, going through the board and to the front face to receive the acoustics.
I don't know why the mic not working is so common after an HTC One M8 tear down, as it seems many others are having the same issue. One theory I have is that pulling the circuit board from the motherboard while power is still applied (not unplugging the battery first) might be jacking the microphone somehow. Just a theory, but I'd recommend to be safe that anyone replacing the board should unplug the battery cable before replacing the USB/mic circuit board.
I'd just like to chime in to say that I've read about some people having problems with the mic not working after replacing the USB board. From what I understand, there are two different versions of it, and replacing it with the wrong one can cause that very issue. You should look into it.
EDIT: Source - http://www.witrigs.com/blog/htc-one-m8-audio-jack-not-work-after-charging-board-replacement/
Mic broken after USB repair
Old thread but I have the same problem. Replaced USB board and now my mic does not work. However I am pretty certain I did order the correct board (had 2x connectors for my Verizon HTC m8). And my microphone jack work great which others indicate is often broken along with the mic. Anyone have any workarounds?