Develop Bugs

Please Help!!

I installed a Core 2.0 on my Wizard (T-Mobile MDA) but it still shows me that i have Windows Mobile 5.0. I thought Core 2.0 (Based on Xplore) was supposed to be a Windows Mobile 6.0 ROM. before that i installed 5.Crossbow Underground Edition, WM6 Most Beautiful Edition and Crossbow Reloaded. 5.Crossbow Underground Edition halted at 96% and Gave communication error but other two halted at 99% and gave Communication error but when i installed Core2.0 it was installed but it has the same old look and shows It as WM 5.0. My wizard is G3. It's IPL/SPL is 2.26 and OS is 2.26.10.2 (something like that). Can anyone tell me what problem am i facing and if it is no problem then which version of WM6 should i install which would be installed and will have a look of WM6 and would be shown WM6. Help will be appreciated.
Thank You!!

You need to unlock your phone. Please follow the stickies in the forum and read the Wiki before asking questions.

BBowermaster said:
You need to unlock your phone. Please follow the stickies in the forum and read the Wiki before asking questions.
Click to expand...
Click to collapse
sorry! but my phone is already CID/SIM unlocked.

Are you sure it is CID unlocked? CID and Sim Unlock are not the same thing. All signs to me point to a phone that is locked (Flashed phone still on original OS)

u need to CID unlock before flashing..halting at 96% 99%, means that the SPL cannot b upgraded downgraded since yr CID is locked..pls read wiki first

help with ROM upgrade and problems with SIM

Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!

micke99 said:
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
Click to expand...
Click to collapse
Hi i'm not an expert, but it's not right that when you start the Diamond it says "1.37.00.00" when in fact you have installed ROM "1.37.413.3SVE".
I would suggest try flashing the hard SPL again, then flash the new ROM again. (and use with the signed version of Hard SPL this time for safety against bricking).

Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...

micke99 said:
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
Click to expand...
Click to collapse
That is not really a problem. On my phone, which works perfectly well, I also only see the major number release (i.e. 1.37.00.00). I don't think that's a symptom of why your phone is not working. You should try to find the cause elsewhere, but I also do not know where you should start.

Yes because the phone is working with russian ROM, But not when i install the Swedish... hmm...
Any clues=?

i can help you - flash this:
http://rapidshare.com/files/129598071/Diamond_Radio_1.00.25.05.rar
and your swedish rom will work

ROM

please can any one help me i've just had an an htc herm300(t-mobile mda vario II) as a gift but there isn't any OS in it so i need a rom (windows mobile 6) compatible with
i've downloaded several roms but unfortunately no one was the right :S
so if somebody could help me i'll be very gratefull
Thanks

huh?
what do you mean by 'no os'?
basically, you first need to flash Hard-SPL from the Hermes Upgrading thread and afterwards any ROM from this thread.

I'm not sure how you could remove the os from one of our phones.
Try something like the stock at&t rom, just to see if it will flash and get the phone to a working order.
Then you can do hardspl, and flash any hermes rom you like.

thnx for ur replys i'll try !!!!

sorry but the flashing stops in 1% then the mda automaticly reboots

Problem whit Arte 100

I need an help i receive this from Netherlands and need to change language in italy so i dowload P3300 Italy 3.13.408.1_02.94.90 Ship R, but first i use USPL and all process go ok, but after when i try to charge this Rom i receive this error 244 ivalid Model ID, why
Tanks for help
ILP 1.12.0001
Spl 1.11.cmon

Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.

Are you using Vista? If yes, then try downloading in a computer with Windows XP?

gsmsupport said:
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Click to expand...
Click to collapse
yeh,i have same problem.did spl as well but dose not update rom and tells invalid.whats to do plz help.
ipl 1.14.0001
spl 1.11.0000
os 1.14.0.0

Please, don't revive threads from over a year old. As I appreciate you using the search function, if you find a thread which is over a year old, best thing to do is create a new thread.
Also, this thread is related to upgrading your Artemis, so it doesn't really fit in ROM Development. Closing the thread.

Upgrade HTC 8525

I have HTC 8525 unlocked. I am from USA using T-Mobile as Carrier. I have WM 6.0 can I upgrade it to 6.5. if yes where can i download it. pls give me the links.

u need to flash HardSPL first, then download a custom rom of your choice, and flash via the Custom RRU or the SD card method.
use Active sync(xp) or Windows mobile device center (vista) when u connect with PC.

swapbor said:
I have HTC 8525 unlocked. I am from USA using T-Mobile as Carrier. I have WM 6.0 can I upgrade it to 6.5. if yes where can i download it. pls give me the links.
Click to expand...
Click to collapse
I'm not trying to be a butthead here but, if you can not figure out the search button at the top of the forum, i highly suggest you NOT try to upgrade.

Best bet is to search the WIKI. It has the answers for your questions.
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes