Hi.. I need a camera... - 8525, TyTN, MDA Vario II, JasJam ROM Development

I want to buy e new camera for HTC Hermes S100 and I don't know where can I found it. Can anybody help me ?????

There is no "Hermes S100". But I own both a Hermes and a Magician (aka Qtek S100). I removed all cameras of those PDAs.
What did you do to yours?

Hi...
I buy my phone from ebay. It was a refurbish phone, not new. Everythink is ok except camera. In center of image is an area were are problems. In this conditions, I want to change camera. But I don't find a camera for my phone.

Related

Disable camera ?

We are looking to purchase a number of SPV M2000 and C500 phones from Orange.
Due to the nature of our business we can not take camera phones on Customer's sites.
Orange are not being very helpful on this so I am investigating how we can disable the camera function on these phones.
I have already considered supergluing something over the lens or even a drop of superglue on the lens.
Any other suggestions ?
The blue angel is also sold with a non camera version.
T-mobile has it that I know. As for orange, no idea.
If anybody from your company got one of those hacked phones and like you found this site they would most likely also be able to fix what ever fix that made on the software or hardware to prevent them from using the camera.
I was thinking about even deleting the phone software off them ?
Hum, like I said, you found this site so why should the others not?
Its on our FTP site even with the new Album version (camrea software that is).
BTW May be deleting the phone software is not such a good idea just in case you want to use it as a phone (since you want to stop others from using it as a camera). But I think I got what you meant (grin)
wanna trade ?
I have a Siemens SX66 (blue angel) without a camera
(just kidding - its my only mobile and I have no idea who you are )
Yeah, the Siemens SX66 from Cingular here in the USA does not have the camera. Many of us are disappointed in its absence. You could find a way to get the Siemens units from the US.
Why in the world buy a Blue Angel to disable the Camera and THE phone?????
The Qwerty and Wifi can't be that much worth.
Anyway, like MDAIIIUser says, no matter what you disable or no matter what lock you put on it, it's quite simple to undo and get a fully working BA, well except for the glue on the lens that is :wink:

I-mate JasJar

Hi ,
I purchased i-mate JasJar today! its is a beauty, and it performs just as well as it looks.
Many new features are added by microsoft.
It is just Great !!
Youa re from Dubai I hope...
how much is the damage on the wallet? Do they accept trade in deals?
JasJar being sold in Dubai at FONO
Damage is AED 4449/-. :? and they don't trade in. It will be officially launched in Dubai At Gitex by Plug-in, this is what i heard at the sales counter when i bought mine.
That's way too much Kash76. It won't only damage my wallet, it will rip the pants I am wearing. I don't know if its worth it but heck, I'd rather carry a laptop (cos they cost the same) than a brick...
I mean an Imate Jam + Nokia 6680 for 3GP. Prices are getting more and more ridiculous including the Nokia 8800.
I feel damn bad though... Lolz...
jasjar updated
[B][/B]
Mvmajorem said:
That's way too much Kash76. It won't only damage my wallet, it will rip the pants I am wearing. I don't know if its worth it but heck, I'd rather carry a laptop (cos they cost the same) than a brick...
I mean an Imate Jam + Nokia 6680 for 3GP. Prices are getting more and more ridiculous including the Nokia 8800.
I feel damn bad though... Lolz...
Click to expand...
Click to collapse
i am in the process of having my imate jasjar updated from wm-5 to wm-6, in doing this will i be able to use a SDHC card in it rather than the standard SD card
SDHC card for imate jasjar
I am in the process of having my imate jasjar upgraded from its wm-5 to wm-6, in doing this, will i be able to use the new sdhc card in it rather than the standard sd card
harrio said:
I am in the process of having my imate jasjar upgraded from its wm-5 to wm-6, in doing this, will i be able to use the new sdhc card in it rather than the standard sd card
Click to expand...
Click to collapse
Yes. SDHC card will work fine in your JasJar, as long as it has WM6 from one of the latest ROMs found on this site.
SDHC does not work with WM5, only WM6.
sl9 said:
Yes. SDHC card will work fine in your JasJar, as long as it has WM6 from one of the latest ROMs found on this site.
SDHC does not work with WM5, only WM6.
Click to expand...
Click to collapse
you r wrong ,SDHC can work with WM5 with installed SDHC driver !
swat4 said:
you r wrong ,SDHC can work with WM5 with installed SDHC driver !
Click to expand...
Click to collapse
Are you sure? Do you have a source to back up that statement? Because my Jasjar is still running WM5, and I would love SDHC support for it.
sl9 said:
Are you sure? Do you have a source to back up that statement? Because my Jasjar is still running WM5, and I would love SDHC support for it.
Click to expand...
Click to collapse
Yea,I m using 4G SDHC Class 4 now ,no any problem on wm5 ,u can download SDHC driver from my link.
imate jasjar
I have the IMATE JASJAR and just had it upgraded from its wm-5 to wm-6, in doing this i noticed that I now don't have the little screen change icon tha was at the very bottom of the wm-5 screen. is there any way i can change screen direction or have i just lost that feature. the jasjar still goes from its portrait to landscape but i miss the idea of my being able to change screen direction. my next question is, since i've upgraded from wm-5 to the wm-6, does this also increase the 3-g phone qualities. thanks.
i did in fact download the wm-6 on my jasjar and when i went to place the SDHC card in it, it was not reconized at all, however, went i placed the regular 4gb SD card in it, it was immediately seen, why is this happening when i do in fact have the new wm-6 installed
i had my imate jasjar upgraded to wm-6 which is nice, however, in doing this, i lost the screen orientation control that was in the right hand bottom of my today screen, is there anyway to get this control back or any other way to do the screen orientation. it does still automatically change from landscape to portrait but i just don't have the ability to turn the screen where i wish to turn it.

Better dialer for Imate 8502?

hi. Anyone got any suggestions for a better dialer for this candybar phone with front facing keyboard?
All I can seem to find are HTC type ones that require a landscapre view to be able to dial directly from the letters on the keyboard (as opposed to numbers).
Better dialer for 8502
I second this. I have installed HTC Touch Dual Dialer and it works great except you cannot use the hardware buttons only the screen buttons.
Found a great solution.
http://forum.xda-developers.com/showthread.php?t=395086
One problem I have found with alternative dialers on the 8502 is that the "disable touchscreen while on call" option doesn't work any longer.
Does this dialer still allow the screen to remain locked?
i-mate 8502: Anybody sells display or phone? /¿alguién vende pantalla o teléfono?
Good afternoon, folks
I was relatively happy with my i-mate ultimate 8502 till I dropped it and the display broke.
As I'm against buying new stuff if you can at a reasonable price fix something, I'm asking:
is anybody willing to sell almost altrusistically a display or even the whole phone? We could do it through the normal channels (paypal, google, ebay,whatever). Or in person, I'me based in Spain.
Warm regards,
Manuel

I-mate pda2k and O2 XDAIII parts

I would like to know whether the parts of my i-mate pda2k are the same with O2 XDAIII parts.. I want to replace the casing of my imate pda2k as well as the keyboard.. I am just planning to buy defective O2 XDA III to replace some parts on my imatepda2k.
Do all the screws, fittings, external and internal parts of imate pda2k same with O2 XDA III?
and the O2 XDAIII the same with O2 XDAIIs? they do look the same..
man31 said:
I would like to know whether the parts of my i-mate pda2k are the same with O2 XDAIII parts.. I want to replace the casing of my imate pda2k as well as the keyboard.. I am just planning to buy defective O2 XDA III to replace some parts on my imatepda2k.
Do all the screws, fittings, external and internal parts of imate pda2k same with O2 XDA III?
and the O2 XDAIII the same with O2 XDAIIs? they do look the same..
Click to expand...
Click to collapse
You should look in the wiki, you will see all the possible name variations for the BA. If I am not mistaken, the only thing that may change between models is having a camera (or not like the SX66). The only BA-type device that will have a difference is the Harrier (CDMA version of the BA) which has a few more important differences.
i believe there are actually more differences in the hardware specs, like two different displays or something and i do remember there was a table on the wiki and i know, whenever i look for it, i spend ages searching, i wanted to provide the link here, but actually, i cannot find it right now... again.
Chef_Tony said:
i believe there are actually more differences in the hardware specs, like two different displays or something and i do remember there was a table on the wiki and i know, whenever i look for it, i spend ages searching, i wanted to provide the link here, but actually, i cannot find it right now... again.
Click to expand...
Click to collapse
True, but if he is only looking at the casing, he should not be concerned with anything "under the hood". As long as the case is the same, he will satisfy his needs.
actually i am planning for to get the casing of a defective O2 xdaIIs, which similarly looks the same with the imate pda2k.. will i succeed with this one?

Where do I buy a Replacement Lens

Hey there,
Just wondering where I can buy a replacement camera lens for the trophy since a mate of mine managed to drown his. Online stores are fine as long as they ship to Australia.
Thanks in advance
Try a site called gsmarena dot com, I used to find a lot of WM6 components there, can't guarantee the quality though.
Sent from my Touch-IT Trophy using XDA Windows Phone 7 App
How do you even get the camera lens off, or do you need to take apart the phone?
I'm replacing my touch screen and when I came to the motherboard, I was able to remove the lens from the phone and to put there a new one. I haven't done this because I don't need it. But it should be possible.
Greetz,
Martijn

Categories

Resources