Hello friends!
I searched in the whole Artemis forum about the pairing between htc3300 and MB bluetooth car kit SAP V2 but it seems there isn´t a fix to this problem.
Anybody knows if there is solution to this problem (new rom, patch, software, etc)?
Thakyou in advance and sorry for my bad english
Best regards
Nope, I am afraid there is no solution for this. I had the very same problem and learned the hard way that htc3300 doesn't allow SIM access, so you need to get the handsfree bluetooth unit from Mercedes (ebay search "Mercedes bluetooth hfp" shows you the prices). With this unit, your htc operates as sender and receiver, you can't use your Mercedes phone antenna. That's the downside, but the upside is that you can use your htc as navigation system during bluetooth connection in the car (which you couldn't if SAP had taken control over the device)
Related
I am interested in this http://www.parrot.biz/united_kingdom/products/index.php?id=ck3300 Does anybody have any experience using this device, how well does it work etc. ?
I plan on using it with O2 Mini S and possibly Tom Tom software what do you guys think?
I have a CK3300 and the similar CK3100 (no GPS) in my wife's car.
They work superbly with Sony Ericsson phones, less well with Motorolas and Nokias but a bit of a disaster with the XDA Mini-S. Doesn't auto connect, doesn't synch contacts properly, overwrites voice tags. There's a bunch of posts on the subject in the Parrot forum on their website. Rumours that there will be a software upgrade shortly which will address some issues.
I haven't got around to trying the GPS with TomTom on the XDA (as I can't get it to install!) but it worked fine with my previous PPC (an iPaq RX3715)
--
Dave
I have a CK3300 not had to meany problems on the GPS side but my xda 2s and my axd mini would not work with the handsfree bit.
My xda exec works fine on GPs and handsfree.
Very good bit of kit overall
Beside experience, I have a question to post here.
I have Parrot СК3300 for 2 years. As handsfree kit, it works perfectly with Sonyericsson K750i, 700i, Z800, P900. With Sonyericsson P900, it works perfectly as hands free kit and GPS module simultaneously.
However, after connecting my QTEK2020i (1.11.00 WWE, Radio 1.02.00, ExtROM 1.11.113 WWE dd 27of Jan 2005) I can use Parrot as GPS module only. Any attempts to use Parrot as kar kit leads only to loud clicks from speakers. So just for now, I use Parrot as hands-free for Sonyericsson K700i and as GPS module with QTEK simultaneously.
No way to fix it. I delete all Bluetooth devices, soft reset, ad only Parrot as hands-free, soft reset. No result.
Can you suggest me how to fix it.
Thanks in advance!
Hi,
I have a CK 3000 intsalled with Tom Tom and a third party BT GPS mouse. The Parrot works very well but it has to be paired as a Hands-free set and not as a headset. One small bug, though: I have to start TT first for the GPS to connect when getting back into the vehicle. After that I start the engine, which connects the CK3000 to my MDA II. If the CK is connected first, TT can't find the mouse.
I've been looking for a way to get the audio to be put through the the CK. I once found a piece of software that could do that on this site but inspite of hours of searching, I haven't been able to find it again. - HELP!
parrot car kit
I have a parrot CK3500 GPS car kit and it works well with TomTom Mobile 5 on my SPV E200 ,C500, C550 and has worked with TomTom Navigator 5 my M2000 as well. This is for Voice AND GPS simultaneously.
with earlier versions of TOMTOM i needed to rename the bluetooth connection from Parrot to TomTom Wireless GPS.
I have an XDA Mini S too which is on a data only tariff (so havent tried handsfree) but TomTom 5 works with it for GPS. They seem a little fiddly to set up, but once set up they are great.
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
The only criticism is that the GPS voice instructions dont go through the speakers. However sometimes they do, and it seems to be if you start TomTom before you switch on the car ignition, the car kit thinks a call is in progress and relays the GPS through the speakers. It doesnt always work, but sometimes its a bit of a shock to get Jane bellowing through the speaker!!
The downside is that if you take a voice call over the car kit, it seems to re-set and the GPS voice then reverts back to the phone speaker.
I have emailed Parrot about this and have not had a reply as yet.
Re: parrot car kit
shadowman said:
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
Click to expand...
Click to collapse
Thanks for your reply.
As far as I understand, I can't solve problem with incoming - outcoming telephone calls by some "secret' QTEK settings.
Therefore, I'll try to find "Any Bluetooth Tweak" program to fix it.
Can you suggest any "Tweak" software?
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
I'm awaiting my new Skoda Octavia Scout the next days, cause the Factory BT Handsfree from Cullmann was unable to get a stable connection to my Hero/ Artemis i cancelled it and plan to use a Funkwerk Dabendorf ego Flash.
But there will be a possibility to use TMC on an Hero/ Artemis to via an BT TMC reciever from gns soon (for the german speaking guys in here: http://www.pocketnavigation.de/news/view_1005/1.1.10.html) which i would like to use, too.
Edit: GNS TrafficBox FM9BT RDS TMC Receiver with Bluetooth
Optimizes TMC reception by connecting to the vehicle’s radio antenna
Designed for reception of digital traffic information via TMC
Allows dynamic navigation with suitable navigation software
Data transmission via Bluetooth
Alternatively with DIN / ISO or FAKRA plug
Power supply 3.3–14 V
So my question is: can the Artemis/ Hero (t-mobile branded) handle 2 BT connections at a time (Handsfree und TMC or TMC/GPS mouse?).
Thanks, Flocky
I currently have a Wizard and quite often have my BT GPS unit and my BT Headset connected and both work fine together, so I see no reason for the Artemis to be different, or at least I hope that is that case as I will be getting one next moth as I can't afford a Kaiser.
Hi,
I have the following problem:
I am using XDA Orbit 2 and a car-radio Maqma MQ-106BT. This radio offers Bluetooth-connection to my XDA. It supports the BT-headset (A2DP) and the handsfree profiles.
After pairing the car-radio is shown with both active profiles in the settings-screen of the XDA.
I want the car-radio to play the radio program and to give the TomTom-voice using the car-speakers. The system works very well for the phonefunktion. But if I start TomTom the radio sound stops and only the voice of TomTom is to be heard but nothing between the TomTom comments. It seems, as if TomTom uses the BT-headset Profile and thus the radio is always waiting for sound from the XDA.
Are there XDA-settings which would help me or is there a possibility to force TomTom to use the handsfree profile, thus only muting the radio if there are comments from the navigation?
I hope here are some experts who are able to help me!
Best regards from Luebeck
Micha
Hi,
I can't believe it: Not even one answer?
Is it really such a special task? I have thought that here in this forum there are only XDA-specialists???
Please, if there is someone who has an idea, please help!!!
Regards
Micha
Bump, I have a similar question in the Athena forum. Best guess I have is to mess with the registry to force the tomtom commands to not go through A2DP, but through HCP (phone signal) - that way priority is assured, but you may have to physically hang up the signal to get back to radio. At least the signal would start automatically....
As far as i know to allow the radio to be played in between tomtom voice commands you would need a fixed wired connection and also a car radio system that allows line in input to be switched on and off. The problem isnt the PDA the problem is the radio system in the car.
As far as i know to allow the radio to be played in between tomtom voice commands you would need a fixed wired connection and also a car radio system that allows line in input to be switched on and off. The problem isnt the PDA the problem is the radio system in the car.
i have the same issue with the tytn2, i cant get my tomtom sound over my radio.
I'd appreciate it if anyone could help!
fwiw, I am still searching the forum for a solution. I have found some old bluetooth posts, that may hold the key:
http://forum.xda-developers.com/showthread.php?t=281977
in particular, message #2 of thread, concerning BTAudioNav hack:
http://forum.xda-developers.com/showpost.php?p=1046077&postcount=2
Some of this info is dated, so I haven't tried anything yet, and as the posts indicate, it takes 2 to tango. The WM6 device may be doing everything right, but the equipment you are pairing to may not be able to be configured correctly....
Update, BTAudioNav is not working, I assume that it is for PocketPC and I am running WM6
?!? Tomtom commands
[email protected]
I have the same problem.
Phone: HTC tytn2
Bury Wired Handfree
Perfect Sound Quality for Calls but: No system Sound, no TomTom Sound.
Yesterday i drive on the Highway, Tomtom was on and a call was incoming but the tytn2 was rebooting by him self .... AND NOW IT WORKS !
I hear all tomtom commands! I don't no why but it works!!!
Update, it seems that tomtom goes over the a2dp signal and not the handsfree profile.
If it was handsfree profile, it would cut into the car stereo music. A2dp doesn't have priority though with most car stereos.
Had I known this, I wouldn't of purchased tomtom....
Hi guys, I have the following question:
I am planning to buy e bluetooth GPS receiver for my Prophet. In my car, however, I have a bluetooth hands-free system installed. So my question is, will it be possible to have both the GPS receiver and the hands-free system connected to my phone at the same time?
Thanx,
Boyan
Seriously, no one has tried this before? I suppose it should be working, but I really don't want to spend the money on a GPS receiver and not be able to use it simultaneously with my car kit...
hello there blazarov,
it will work, and yes many have already got this up and working.
Search for SIG or Piconet or simple Bluetooth on say Google
and it will get clear to you.
I have experienced i have to let Tom Tom activate bluetooth
and then my Rikaline GPS receiver and my Parrott carkit work.
In this order it goes well.
When bluetooth activated and connected to my Parrott carkit and then activating TomTom it can't find/connect to my Rikaline GPS receiver.
btw i use Qtek S200 ( = HTC Prophet)
480 said:
hello there blazarov,
it will work, and yes many have already got this up and working.
Search for SIG or Piconet or simple Bluetooth on say Google
and it will get clear to you.
I have experienced i have to let Tom Tom activate bluetooth
and then my Rikaline GPS receiver and my Parrott carkit work.
In this order it goes well.
When bluetooth activated and connected to my Parrott carkit and then activating TomTom it can't find/connect to my Rikaline GPS receiver.
btw i use Qtek S200 ( = HTC Prophet)
Click to expand...
Click to collapse
Hi,
Thanx for the information! It is also good to know that the combo works with a Parrott carkit, as i have the same one in my car