How to enter BOOTLOADER mode in Diamond - Touch Diamond, MDA Compact IV ROM Development

Hi....
since the OS of my PC is vista-32, and I know there need some tricks in using RUU to flash ROM.
http://forum.xda-developers.com/showthread.php?t=291723
The most important step: "First of all, connect your device when it`s in bootloader."
Would anyone can show me how to enter BOOTLOADER mode in my Diamond, I just want to flash to CHT ROM.
Thank you~~~~~
Ken

That was long time back, now vista works fine in flashing....

On Vista 64, I had to take the following steps to have it working:
Fisrt: connect the device in boot mode to the PC
Second: wait until Vista installs a driver update
Third: disconnect the device and restart the PC after the update is installed
Forth: right-click on the RUU executable, and choose
compatibility mode with Win XP SP2
Fifth: run the RUU, cross your fingers and start praying
As how to enter bootloader, press volume down and reset simultaneously
HastaSSSS

I already solve my problem la, thanks for those who reply me~~~!!!

s1rl4ncel0t said:
As how to enter bootloader, press volume down and reset simultaneously
Click to expand...
Click to collapse
tank u very much

bodybuilder said:
tank u very much
Click to expand...
Click to collapse
sorry i very stupid! its ok now thanks all!

HTC Diamond dosnt work after rom upgrade.....
i tried stupitly somethings at my new pda, (i set up one rom called DiamondC_HSPL057.exe on Diamond) and now..., soft reset , hard reset, power button ,charge sign, doesnt operate...i tried with full battery but nothing..please help!!!!

Can you enter in bootloader?

no i couldnt

goknis said:
i tried stupitly somethings at my new pda, (i set up one rom called DiamondC_HSPL057.exe on Diamond) and now..., soft reset , hard reset, power button ,charge sign, doesnt operate...i tried with full battery but nothing..please help!!!!
Click to expand...
Click to collapse
i dont think that is a diamond rom.
theres nothing on here named like that.
you might well of bricked it.

bootloader
As how to enter bootloader, press volume down and reset simultaneously
HastaSSSS[/QUOTE]
How long does it take to load up in bootloader mode?

s1rl4ncel0t said:
As how to enter bootloader, press volume down and reset simultaneously
Click to expand...
Click to collapse
thks a lot, you save my diamond

first time i'm posting. I have gone thru this thread and I am still stuck. I've tried everything suggested. I attempted to put rom SwiftBL-WWE-Diamond-v7-0-Full-16MbPP on my diamond. It now keeps resetting itself to the splash screen. I have tried to hard reset but it won't do it. please help if you can.

s1rl4ncel0t said:
On Vista 64, I had to take the following steps to have it working:
Fisrt: connect the device in boot mode to the PC
Second: wait until Vista installs a driver update
Third: disconnect the device and restart the PC after the update is installed
Forth: right-click on the RUU executable, and choose
compatibility mode with Win XP SP2
Fifth: run the RUU, cross your fingers and start praying
As how to enter bootloader, press volume down and reset simultaneously
HastaSSSS
Click to expand...
Click to collapse
Thanks for the way on how to enter bootloader... had a problem with my diamond, and finally found the way to do it...

ezzie said:
first time i'm posting. I have gone thru this thread and I am still stuck. I've tried everything suggested. I attempted to put rom SwiftBL-WWE-Diamond-v7-0-Full-16MbPP on my diamond. It now keeps resetting itself to the splash screen. I have tried to hard reset but it won't do it. please help if you can.
Click to expand...
Click to collapse
Same things happening to me although I used a differnet rom: Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03] I think I may have bricked mine as well.. Is there such a way to erase everything and start over? My phone keeps restarting itself

I can't enter the bootloader mode by pressing volume down and softreset, how is it possible? The device has to be turned on?

zooster said:
I can't enter the bootloader mode by pressing volume down and softreset, how is it possible? The device has to be turned on?
Click to expand...
Click to collapse
Yes, if it's off, turn it on, and after the vibration, reset with the stylus, you have three seconds to press (and hold) volume down, when see tricolour screen release the vol button.

Resetta col pennino e premi immediatamente volume giu+ tasto centrale e tienili premuti finche non vedi lo schermo rgb

press volume down and Power On for boot mode

Thanks, I had to hold the volume down button till the 3 colour bars...

Related

Diamond not conecting

I want to upgrade rom on may diamond but when conect the phone to my conputer the phone it just starts to charge. The computer does not detect him and I have activated usb conection on the phone.
I am using a standard miniusb cable used also for canon fotcamera, Nokia N95, motorola V3 (v360 L6, L7 etc.)
I did instaled Activesync on my computer but still no result.
You did no say which Win OS you are using - If Vista then you do not need activesync (AS) but windows mobile device centre or any other Win OS Before Vista then AS is what you need. AS needs to be installed before you connect your phone to the PC.
Have you restarted your PC first before install - this also helps sometimes
Try this....
Start>Settings>Connections>USB to PC and here ....uncheck the box Enable advanced network functionality
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
R3PUBL1K said:
You did no say which Win OS you are using - If Vista then you do not need activesync (AS) but windows mobile device centre or any other Win OS Before Vista then AS is what you need. AS needs to be installed before you connect your phone to the PC.
Have you restarted your PC first before install - this also helps sometimes
Click to expand...
Click to collapse
I am using Win XP SP2 and I have tried every thing that you said but nothing.
band27 said:
Try this....
Start>Settings>Connections>USB to PC and here ....uncheck the box Enable advanced network functionality
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
Click to expand...
Click to collapse
I did uncheck that box but without any results so now I will try internal method. But I'll have to send the file to the phone via bluetooth and see if it works.
band27 said:
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
Click to expand...
Click to collapse
How much is it supose to take "Internal method"?
After pressing Vol_Down + Back button it showed the three color screen then it changed to a white screen with loading on it and it stays like that (after pressing Vol_Down + Back button I didn't press nothing else).
The Internal Method shouldn't take you any longer then 2 min. or so.
Once you have started the flashing to begin in the Grey menu....it will eventually say OK...OK
and yes
at this stage you soft reset and press vol down and centre round button.
Grey menu then gives you a choice to reset back to manufactures settings which is what you want (vol UP)......this should take an additions 2 min. if that.
band27 said:
The Internal Method shouldn't take you any longer then 2 min. or so.
Once you have started the flashing to begin in the Grey menu....it will eventually say OK...OK
and yes
at this stage you soft reset and press vol down and centre round button.
Grey menu then gives you a choice to reset back to manufactures settings which is what you want (vol UP)......this should take an additions 2 min. if that.
Click to expand...
Click to collapse
I have tried everything that you said and nothing.
The only diference is that now when I conect the cable to the phone it asks me witch mode to conect it (Activesync or storage), but the computer still doesn't see's it.
Tried another USB-cable?
chribruu said:
Tried another USB-cable?
Click to expand...
Click to collapse
I tried with 3 diferent cables.
Have you tried putting your device into bootload mode (soft reset & vol. down) and the connecting to your pc. The bottom of your coloured screen should switch from serial to usb....If this switches to USB then you are good to go with downloading what ever Rom using the RUU_
Keep me posted...
band27 said:
Have you tried putting your device into bootload mode (soft reset & vol. down) and the connecting to your pc. The bottom of your coloured screen should switch from serial to usb....If this switches to USB then you are good to go with downloading what ever Rom using the RUU_
Keep me posted...
Click to expand...
Click to collapse
It doesn't switch's to usb it only shows "serial". If I put it into bootmode while it is conected to USB it shows nothing, not "USB" or "Serial" it's blank.
I am begining to belive that there is a hardware problem in my phone.
Do you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en

Upgrade ROM code error

I have flashed many Custome ROM's before. I have HardSPL installed on my phone.
I tried flashing to a ROM (I forget which one now, I think Cloudfa or something) and it stopped at about 15%. The Update utility stopped as well.
I cannot connect to bootloader at all. I tried holding down on Volume down/Reset to enter bootloader, but the thing is that it's already in bootloader with the message "Upgrade ROM code error, Please try again"
ActiveSync doesn't see my phone either. In fact all it does is just sit on the bootloader screen with that error...
Please Help... Thanks You...
A normal soft reset still brings you back to Bootloader?
What happens when you plug in your device? Does it not change from serial to USB at the bottom?
band27 said:
A normal soft reset still brings you back to Bootloader?
What happens when you plug in your device? Does it not change from serial to USB at the bottom?
Click to expand...
Click to collapse
Sorry. Yes it does show USB when plugged in, but won't respond to anything that I have tried software wise. It does not switch from this bootloader/error screen at any point. Even after I pull my battery and turn it back on...
I have yet to come across a thread which has this exact problem...
jzalapski said:
Sorry. Yes it does show USB when plugged in, but won't respond to anything that I have tried software wise. It does not switch from this bootloader/error screen at any point. Even after I pull my battery and turn it back on...
I have yet to come across a thread which has this exact problem...
Click to expand...
Click to collapse
Have you tried flashing a different ROM while in bootloader?
^^ Yes. It give me an error on my computer...
I would like to try the internal flashing method but I don't seem to have a way of getting at my Storage Card.
I found this thread with a similar problem
http://forum.xda-developers.com/showthread.php?t=480022
I WAS just able to get off of that screen I was talking about, but the best I get is to the Touch Diamond Screen that lists my ROM and such. So no real progress.
I have a feeling that I would resolve my problem if I could Flash from the Interanl Storage...
Have you tried hard resetting the device?
Pull out stylus and Holding....1) Vol. Down 2) Center Round button 3) then press red button aka soft reset with stylus
Nothing...
im stuck
hi all i am very new to this im not sure what i have done or how to fix the problem i download these this morning and they worked
rom version 1.57.831.1(47324)wwe
radio version 1.14.25.24
protocol version 52.64.25.34u
when i bootload in tri colours screen it shows
BLAC100 32M
SPL-1.56.OliNex
MicroP-Blackstone (led)v6
if it shows that i must of done something right i think of what ill read
and i have windows 7 ulitmate and i have Miri_WM65_21815_V19.0_Premium
when i double click on the BLACKSTONE RUU WRAPPER it crashes then i rename a new folder and done it from there and it works but it comes up wit error 208 file open? then i got told to rename to ruu_signed.nbh file to blacimg.nbh and to store it in the root of my sd card done that then somehow i got it to come up to the screen by Turn off the phone, press and keep pressed volume down button and while keeping it pressed turn on the phone then i see a message "Press power to flash your device" and i press power to flash got to 0% and it crashed and come up with Upgrade ROM code error plz try again and stuck in bootloader mode but now it wont even turn on its dead it wont turn on no matter what i do can someone plz help
all i want to do is get windows mobile 6.5 working i cant understand that it can be so hard to do
thanxs blueboys25!

Trying to flash Tilt 2

Hi all, I have a general problem that I'm hoping someone can help me fix.
I have a Tilt 2, I performed a hard reset back to the stock AT&T rom. I am following the Hard-SPL instructions, but am having difficulties. Here are the steps I have followed:
1) Installed enablerapinew.cab to device and soft reset
2) Am running Rhodium-HardSPL from my PC, while the device is connected via ActiveSync (also showed up in Mobile Device Center as connected on Win7)
3) I am using the Automatic flash button, and I get the first warning dialog just fine. I press Next
4) HardSPL has a list of instructions, saying to make sure that ActiveSync is still connected. This is the part that has the error. When I pressed Next from the previous dialog, the phone goes black, but ActiveSync disconnects from the PC. I have to perform a reset on the device to get it out of the black screen.
I have tried these methods on both a Windows 7 Machine and my Windows XP laptop. It seems that when the phone switches into the black screen, the PC is no longer seeing it as a phone device, so it automatically cancels out activesync.
Any suggestions?
Thanks!
how long are you giving it? When it runs this your phone will reset and go into bootloader mode, so its possible that your phone is just loading. Do any on screen errors pop up?
burtonsnow8 said:
how long are you giving it? When it runs this your phone will reset and go into bootloader mode, so its possible that your phone is just loading. Do any on screen errors pop up?
Click to expand...
Click to collapse
After the first dialog box, the phone goes black and then does nothing unless I use the reset button. I let it sit there for about 10 minutes, and all it did in windows was install a Qualcomm driver. Not sure why activesync cant see the phone once it goes off. I just tried booting the phone up into bootloader by itself and seeing if any drivers installed, but nothing did.
Just tried a different USB port also, same thing.
The drivers it installs into windows when the device goes black are a Qualcomm driver, and HTC USB Sync. Nothing happens after that
try running it while in bootloader.
shut down your phone, hold the volume down and end/power key while using the soft reset button. Once in bootloader make sure it shows you are connected via USB. Run the hardspl.
burtonsnow8 said:
try running it while in bootloader.
shut down your phone, hold the volume down and end/power key while using the soft reset button. Once in bootloader make sure it shows you are connected via USB. Run the hardspl.
Click to expand...
Click to collapse
That did the trick! Thanks buddy, much appreciated!!!

Major Flashing HELP!

I flashed my Diamond to many firmwares before but today after flashing it to Memo's WM 6.1 I cant seem to flash to anything else... I tried every single version of hard spl and its either connection error or nothing happens... i tried mitty but when i connect my phone to the USB, it still says serial not USB...
Im new to this, atm just generally confused... someone help?
It looks like you USB interface is broken or your cable is not OK.
Try some other cable if possible.
Otherwise, do you have a DIAMIMG.NBH file in the root of your storage? If yes, you can flash it directly from internal storage and then examine your USB.
iXiR said:
It looks like you USB interface is broken or your cable is not OK.
Click to expand...
Click to collapse
or maybe you just dont have drivers for usb bootloader installed ?
-
vicai said:
or maybe you just dont have drivers for usb bootloader installed ?
Click to expand...
Click to collapse
not sure what u mean... if i used the 2003 driver uploaded by the forum it doesn't show USB (just serial). but if i use the official version i get USB.
and just to confirm the flashing buttons are : hold down volume key, press back and reset?
-
ok sorry for the big fuzz, ignore my stupidity...
i was pressing the hang off button instead of the back key for the entire day XD
but still got a problem... the screen just says loading and i do have the DIAMIMG.NBH in my root...
megabeater said:
ok sorry for the big fuzz, ignore my stupidity...
i was pressing the hang off button instead of the back key for the entire day XD
but still got a problem... the screen just says loading and i do have the DIAMIMG.NBH in my root...
Click to expand...
Click to collapse
no need, pred vol down (no back key) when you get the usb in bootloader, start the cursomtruu.exe from the rom you have downloaded, next next next finish

Bricked after flashing MM (Detected for 5 seconds as Moorefield and disappears)

Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
Fede2797 said:
Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
Click to expand...
Click to collapse
in xFSTK option menu in gp flag override value put 0x80000807 instead of 0x800000807
tick enable gp flag override
change device detection time out to 120
click okay, and press power button for 20 second make sure it powers down now click power button and volume down button. as phone vibrates or computer makes detection sound. release power button but keep holding volume down button. begin download and do nothing untill it gives ok
if you are unable to flash raw firmware after geting fastboot do following steps after 2nd step, don't use asus flash tool
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
in xFSTK option menu in gp flag override value put 0x80000807 instead of 0x800000807
tick enable gp flag override
change device detection time out to 120
click okay, and press power button for 20 second make sure it powers down now click power button and volume down button. as phone vibrates or computer makes detection sound. release power button but keep holding volume down button. begin download and do nothing untill it gives ok
if you are unable to flash raw firmware after geting fastboot do following steps after 2nd step, don't use asus flash tool
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
Thanks man, i solved it. I was trying to use flash tool but it doesn't work, i'm gonna try with your solution.
-------------------------------------------
I finally did it! Thank you so much. One last question, do you know how can i flash a recovery? Because when i go to the recovery it appears "error" and that android guy.. if possible a stock recovery so i can upgrade to 6.0
Fede2797 said:
Thanks man, i solved it. I was trying to use flash tool but it doesn't work, i'm gonna try with your solution.
-------------------------------------------
I finally did it! Thank you so much. One last question, do you know how can i flash a recovery? Because when i go to the recovery it appears "error" and that android guy.. if possible a stock recovery so i can upgrade to 6.0
Click to expand...
Click to collapse
You already have stock recovery
Whenever the Android guy with ERROR shows, press and hold the power button for 1 sec and then while holding it, press the volume up button. It will bring out all the recovery options. Cheers...
Thanks, worked for me too ! (just i used volume up + power instead of volume down).

Categories

Resources