Hi there,
I have bought a DAXIAN X999+ and since there is little to no information about this phone I post this here.
I want to extract the ROM from this phone so I can try messing around with it and make sure I have a backup of the original in case something goes wrong.
Problem: I have no idea how/where to start and can't seem to use the search function of this forum to find what I am looking for.
This phone has windows mobile 6 Professional and has the cube built into the rom (you slide from top to bottom and the cube appears) which might be usefull for others to extract it from this rom instead of building this cube from scratch (have tried the one from this forum and it is way slower than mine...)
Thanks in advance
I also have the X999+ it seems to be a good phone, and yes i do know how to get the original factory settings reloaded. Holding the two top buttons on both left and right hand side of the phone, and then pressing the reset, while holding those in, you will see a blue screen, hold buttons for a couple of seconds after the reset was pressed.
Warning this erase all custom setting, phone book and messages from phone, and i suggest to remove sim and Micro-SD before you do this.
As on how to download the rom, Flash the rom, or even how to get into bootloader i don't know. I can however access \rom directory with total comander, and it seems thats where the rom is stored, but i can't copy it out from there yet
Was already aware of the hard reset function with those keys...
The search function finally worked and noticed that there were already some threads concerning the x999, yet none concerning the "plus" version which might have other hardware etc...
I used to have a cect 599 and started the forum and website on freeforums and gethost.
Because of some experienced people, we've managed to flash it so was hoping that there would be people here too who are able to give some pointers etc...
Maybe I'll start a forum & site again concerning this phone, in the hope that there are more people interested.
Thanks for your reply though!
please do , that would be great. they are superb little phones and there is very little info on them at present
hi all
Hi all im new here i bought a daxian X999+ and its arriving in 2 o 3 days.
I don´t know much about phones... just what i been reading in forums..
Is there any way to change the language of the phone? i would to have it in spanish is there some language pack to install or something like that?
Another question, Is there some way to save the original files of the phone so if something goes rong installing i can backup the phone?
Thanks,
Regards from Spain
Hi, I also have the Daxian x999+, pretty happy though I need to double check something with other owners about Internet speed and trouble in displaying maps , graphic seems ok and smooth on my GPS software Mcguider, which drivers is the best to navigate? syschip jaguar or cheetah? else? thanks!
Daxian x999+ and T32
u know i actually thought they were the same thing but how come my X999+ cant use some applications that my girlfriends T32 can use. When i use Internet hers is faster than mine, they both have wifi but what is up with that? someone reply
help! my Daxian X999+ is in chinese! lol. im hoping the ebayer who sold me it is going to exchange it as I think i need a english rom image otherwise.
problem with my daxian x999
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.
juange said:
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.
Click to expand...
Click to collapse
i have a daxian x999+ no boot anymore,blocked too windows page and nothing happen i have this problem after installing spyke.
don't buy this phone,because nobody is abble to tell how install a new rom on it! and you will probably one day have a problem.
my daxian is still in garantie but? does garanties exist with chineese people?
i will see.....
is anyone can tell what is the problem
philpo said:
i have a daxian x999+ no boot anymore,blocked too windows page and nothing happen i have this problem after installing spyke.
don't buy this phone,because nobody is abble to tell how install a new rom on it! and you will probably one day have a problem.
my daxian is still in garantie but? does garanties exist with chineese people?
i will see.....
is anyone can tell what is the problem
Click to expand...
Click to collapse
Did you try a hard reset ?
First, Push both upper buttons from the sides and then power during few seconds. It Will boot with a blue screen first... may it solves.
MY phone now it's going to China, They will change for a new one... Any way, I've just bought a blackberry 8310.
Maybe I´ll give the daxian to my wife, I can't stand with this phone for work.
The only nice thing It was garmin xt with external gps. Perfect.
bye
I've the same problem with my x999, is possible REINSTALL the rom? anybody knows something about this problem?
HEEEEEELP
HARD RESET PROBLEM on my x999
juange said:
Did you try a hard reset ?
First, Push both upper buttons from the sides and then power during few seconds. It Will boot with a blue screen first... may it solves.
MY phone now it's going to China, They will change for a new one... Any way, I've just bought a blackberry 8310.
Maybe I´ll give the daxian to my wife, I can't stand with this phone for work.
The only nice thing It was garmin xt with external gps. Perfect.
bye
Click to expand...
Click to collapse
I've the same problem with my x999, is possible REINSTALL the rom? anybody knows something about this problem?
I did a hard reset on my daxian x999 but rom desconfigured
HEEEEEELP
I need a rom for daxian x999+ , and not find anywere this rom...
Any idea what to do with this phone? Another version of ROM ?maybe from HTC???
I try with hard reset but nothing happened. The guy from the service phone told me to find a windows OS img. , put that img. to MicroSD card , and push the "-" volume button and the power button to boot that img. file, but where i cod find a windows 6.0 OS img.?????
We support the T32 http://hiphonepro.com
Weve been flashing all the so called unflashable chinese phones
windows cab
collemann said:
I need a rom for daxian x999+ , and not find anywere this rom...
Any idea what to do with this phone? Another version of ROM ?maybe from HTC???
I try with hard reset but nothing happened. The guy from the service phone told me to find a windows OS img. , put that img. to MicroSD card , and push the "-" volume button and the power button to boot that img. file, but where i cod find a windows 6.0 OS img.?????
Click to expand...
Click to collapse
Hello,
I've just received my new phone from which replace my death one.
memory card cames with two cabs : windows mobile and other with T32 mobile.
I'll upload asap.
It cames with new extra menu, cooler than the previous one.
bye
Juan from Argentina
juange said:
Hello,
I've just received my new phone from which replace my death one.
memory card cames with two cabs : windows mobile and other with T32 mobile.
I'll upload asap.
It cames with new extra menu, cooler than the previous one.
bye
Juan from Argentina
Click to expand...
Click to collapse
can u make a video of the one u have
I have one Daxian x999+ with the same proble.
I do the hard reset but the do always reboot.
Help!!!!
who can do flash rom???
new menu - new apps? - upload and share
maniatico said:
can u make a video of the one u have
Click to expand...
Click to collapse
no answer from juan so far????
please do so as you `ve proposed.
thxs and regards
juange said:
Hello,
I've just received my new phone from which replace my death one.
memory card cames with two cabs : windows mobile and other with T32 mobile.
I'll upload asap.
It cames with new extra menu, cooler than the previous one.
bye
Juan from Argentina
Click to expand...
Click to collapse
Hello Juan,
We need this cabs, please upload it somewhere and give us a link.
Related
@all,
believe it or not, after hardresetting my extendedrom is empty! having played around with the wwe upgrade rom from the wiki, gadget entered upgrade routine and started flashing upto 3%, then got kicked out with " wrong model ID ".
now datastorage displays 44,53 MB and program storage 27,75 MB.
what are the orig values?
startup after hard reset takes ages, could it be files are still installed? (systeminfo though states NO extrom version!)
This happened to me, I reflashed the TMUK ROM and it was fixed
cactusbob said:
This happened to me, I reflashed the TMUK ROM and it was fixed
Click to expand...
Click to collapse
where from?
and i hope i wont get a "wrong model ID" trying to flash my german machine
p.s. found it on the wiki, was the one that scrapped me!!!
thormdac said:
where from?
and i hope i wont get a "wrong model ID" trying to flash my german machine
p.s. found it on the wiki, was the one that scrapped me!!!
Click to expand...
Click to collapse
You are searching for this
You definitely have an empty ext_rom now? Hmmm, I for myself often experience strange things when doing something to my ext_rom. Unhide and unlock (apparently) work, I can move files to ext_rom, I can edit and so on... but after softreset my ext_rom is back to original...
gladiac said:
You are searching for this
..
Click to expand...
Click to collapse
quite right, but this is the one that lead to the prob, and still I cant flash it due to "wrong model ID" after 3%. All noid routines fail as well!
Any way to get around this? CID problem?
I have the same problem.
Having played around with the tip in the thread http://forum.xda-developers.com/showthread.php?t=283708 and now I am unable to access my extended rom. Even after hard reseting the device. Now, the device does not see the content of the extended rom and the extra softs are not installed.
If someone could upload a french ExtRom, it would be very nice ....
BR, Imer.
Hi,
I have a similar problem.
I managed to see the files from the extended rom by triyng to format the extended rom.
But something strange happened I try again to do a hard reset but the extended rom doesn't want to be loaded.
It seems that unlocked the extended rom doesn't allow you to use it when you do a hard reset.
Please advise.
Regards,
so...
having said that, the obvious thing would be to lock/hide your extended rom again and then hard reset. Does anyone know how to lock the extended rom?
it stuck's at the windows mobile scrren anda don't know what to do help me please
why anyone can help me
i dont uinderstand why my posts don't have anwser
Is this a joke?
Hmmmm....
Don't take it as an offend, but you are at the wrong forum.
I believe you have to ask the question on the right one.
This forum is for QTEK 9000.
Please feel free to look and search before you post.
If you look here it seems that the early QTEK Uni was branded as the 4040 so please dont be so quick to flame...
Anyway onto the problem. Try a hard reset and clear by pressing 0 when asked. if that fails then reflash the rom in the usual way. That should cure the problem.
Psi
sorry man i had a very bad day realy sorry how do i hard reset my qtek
No need to apologise. I have had a hell of a day myself mate.
Extract below is taken from the Universal Wiki - Perhaps you may find all of it an interesting read in
To do a hard reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three). Doing a hard reset will result in you losing all your installed apps and data so ensure you have a backup of everything first.) Everything should be fine from this time. You have to calibrate the screen and do some setting up...
Click to expand...
Click to collapse
Psi
Hello, i'm sorry to get this thread back up, but i'm having a problem that looks much like this.
I can power the device on, but it powers off sometimes at QTEK screen, sometimes at Windows mobile screen, and sometimes i can do the whole setup thing, and when it begins at installing extended, it powers off again! :s
I can get in bootloader, so i don't know if it's bricked or not,
The device is a QTEK 9000
Radio 1.15
the Windows Mobile 6 version of Jmwright or something like that (Latest version)
Can anyone post me a quick walktrough of what i have to do to get my device back up and running... If you suggest another ROM from another developer which doesn't have that camera buffer problem etc, because i really want to start using this device in a safe way.
Thx in advance, i really appreciate all the work done here.. Just want my problem fixed asap
Greetz,
Vergracht Nikki
hello all. i have a big problem if you can help me. i have installed windows 2006 and everything is ok (with each version) untill i take off the battery. after i put it back, i power on and the screen is white and remains that way. only thing that i can do is hard reset or another update. why is happening that?
ady_uaic said:
hello all. i have a big problem if you can help me. i have installed windows 2006 and everything is ok (with each version) untill i take off the battery. after i put it back, i power on and the screen is white and remains that way. only thing that i can do is hard reset or another update. why is happening that?
Click to expand...
Click to collapse
Which kind of hard-spl do you have?
the problem was solved. it was the fault of Igo, i think that it has a virus. i've deleted and put a safe and known version, and is working perfectly. The problem was that each time i've hard reset the device or reinstall windows, igo window appears and ask me if i want to install it. anyway, deleting that version of igo, and install another one was the solving matter. thank you all.
Hi all,
I want to downgrade to 6.1 again after having 6.5 for about 2 days.
I'm experiencing audio issues, which I had before, I sent it to the service-center and it worked like a charm again.
So all I wan't to know is if it's possible to just download the official ROM from HTC.com and use theire RUU to downgrade. I'm a nooooob but I managed to install 6.5 pretty easily. But I don't know what hardSPL does etc. So i'm not totally sure if it's possible. Can anyone help with this. Having abolutely no audio is pretty anoying. Also searched the forum but found nothing usefull, allmost everybody comes to the conclusion that it's a hardware issue. Which is strange because why do I experience this after installing 6.5 and when I used 6.1 it worked.
Thanks in advance
Daan
Load from htc officel website new htc rom and flash of your diamond
when not funktion you cann extraxt the exe.file withe winrar and rename the nb file to diamimg.nbh and take this to root of your diamond hd and make soft reset and audio(-)and reback after push to on/off buttong
syr for my english im türkish and speck germen its inuf
DaanJordaan said:
Hi all,
I want to downgrade to 6.1 again after having 6.5 for about 2 days.
I'm experiencing audio issues, which I had before, I sent it to the service-center and it worked like a charm again.
So all I wan't to know is if it's possible to just download the official ROM from HTC.com and use theire RUU to downgrade. I'm a nooooob but I managed to install 6.5 pretty easily. But I don't know what hardSPL does etc. So i'm not totally sure if it's possible. Can anyone help with this. Having abolutely no audio is pretty anoying. Also searched the forum but found nothing usefull, allmost everybody comes to the conclusion that it's a hardware issue. Which is strange because why do I experience this after installing 6.5 and when I used 6.1 it worked.
Thanks in advance
Daan
Click to expand...
Click to collapse
Ok, let me try. I guess someone will correct me if I'm wrong with what I say
First HardSPL won't let you flash original rom directly. It will block SPL flashing, to avoid relocking or messing up the phone. So, regarding your problem, I would first try to flash a 6.1 cooked rom to make sure that the problem is hardware, not software.
If it's hardware, here is what I did when I had to return my phone:
- First, "cook" an official rom: you have to extract nbh, take only os.nb, rebuild the nbh, flash it.
- Eventually, flash the official radio if you tried alternative radio, same goes for logo.
- After that, your mobile should be almost like official, the only remaining "suspect" is the HardSPL. You have to flash back one of the stock SPL provided here: http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. It has to be done at the end, when everything else is back to stock.
Don't have much time right now to give more details, let me know if you need more...
Thanks a lot man i'm at work right know but i'll try it out as soon as i get home
thanks again
Daan
Just got home from work.
Like you said, I need to know if the problem is HW or SW since i've experienced this problem before, maybe it overheated or something I don't know. Anyhoo I flashed radio 1.11.25.01 and it seems to work fine now. But the funny thing is that when I flashed it with 6.5 there were no problems at all but after about 15 hours or so when I tried to put on some music... Silence!!! F***. So I hope this won't just repeat itself endlessly.
The reason why I tried flashing the radio first is that I kinda like 6.5. But well, if it's going to happen again i'll use your method.
Thanks for the reply, I'll keep you posted if anything weird happens
Daan
DaanJordaan said:
Just got home from work.
Like you said, I need to know if the problem is HW or SW since i've experienced this problem before, maybe it overheated or something I don't know. Anyhoo I flashed radio 1.11.25.01 and it seems to work fine now. But the funny thing is that when I flashed it with 6.5 there were no problems at all but after about 15 hours or so when I tried to put on some music... Silence!!! F***. So I hope this won't just repeat itself endlessly.
The reason why I tried flashing the radio first is that I kinda like 6.5. But well, if it's going to happen again i'll use your method.
Thanks for the reply, I'll keep you posted if anything weird happens
Daan
Click to expand...
Click to collapse
Strange. Yes, it could be overheating Or, maybe a radio crash ? If it happens again, you should try to remove the battery, wait a few seconds and put it back again.
Crossing fingers for you
The sun is Shining!
Well the audio is still working, I'm draining the battery to check if it's maybe a power problem, but so far I still have sound and my battery is down to two bars in the windows mobile power meter (not in the menu bar)
So I really hope radio 1.11.25.01 fixed my problem
I hope this is my last post on this thread and if it isn't, we'll just have to dig further
Thanks very much,
Daan
letama said:
Ok, let me try. I guess someone will correct me if I'm wrong with what I say
First HardSPL won't let you flash original rom directly. It will block SPL flashing, to avoid relocking or messing up the phone. So, regarding your problem, I would first try to flash a 6.1 cooked rom to make sure that the problem is hardware, not software.
If it's hardware, here is what I did when I had to return my phone:
- First, "cook" an official rom: you have to extract nbh, take only os.nb, rebuild the nbh, flash it.
- Eventually, flash the official radio if you tried alternative radio, same goes for logo.
- After that, your mobile should be almost like official, the only remaining "suspect" is the HardSPL. You have to flash back one of the stock SPL provided here: http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. It has to be done at the end, when everything else is back to stock.
Don't have much time right now to give more details, let me know if you need more...
Click to expand...
Click to collapse
Look in my signature for the config of my diamond. I have had no problems whatsoever flashing an original HTC stock ROM from the HTC website. I just use the executable downloaded from HTC.
henk2484 said:
Look in my signature for the config of my diamond. I have had no problems whatsoever flashing an original HTC stock ROM from the HTC website. I just use the executable downloaded from HTC.
Click to expand...
Click to collapse
Thanks, but i'm sticking to 6.5 I flashed a different radio it's working fine right now, but the battery is draining a little bit faster, but i can live with that.
thanks for the info i'll keep it in mind when i decide to switch back to 6.1
Daan
bandit999 said:
Load from htc officel website new htc rom and flash of your diamond
when not funktion you cann extraxt the exe.file withe winrar and rename the nb file to diamimg.nbh and take this to root of your diamond hd and make soft reset and audio(-)and reback after push to on/off buttong
syr for my english im türkish and speck germen its inuf
Click to expand...
Click to collapse
walla aslanım ben hiç bir şey anlamadım..özür dilerim
hi folks,
seems to be that i have a BIG problem...
my t-mobile diamond had some heavy connection problems the last days (apart from this battery sucking system that made me charge it twice a day), so i decided to install both a new radio rom and a new WM rom on it.
after all those attempts didnt work (yes, i've read the threads and yes, i've followed the instructions! ), i got the ****ING IDEA to follow the instruction shown on youtube.com/watch?v=ZYGibMZC7-g (see also forum.ppcgeeks.com/showthread.php?t=36062) for a CDMA diamond. don't ask why, i thought that i could own a cdma phone as all of the gsm software didn't work... :-//
during step no. 1 (unlocking - yes, i wanted to do the whole programm! :-/ ) my diamond switched off and ... is dead now! no chance to switch it on, no chance to get into bootloader, no chance to hardreset...
now my question to the pros: do i have ANY chance to reanimate my diamond? i would be grateful for any ideas!!! thanks in advance,
p.p.
have you tried vol down and soft reset simultaneously?
jfran said:
have you tried vol down and soft reset simultaneously?
Click to expand...
Click to collapse
yes, didnt work...
Try a hard reset. If that doesnt work see if you can enter bootloader. Instructions can be found in a search.
krabman said:
Try a hard reset. If that doesnt work see if you can enter bootloader. Instructions can be found in a search.
Click to expand...
Click to collapse
thanks, but as i've already written, both doesn't work. my diamond is simply... DEAD! :-(
yep looks like it
anyone ANY idea to get my diamond back to life?
my frind i think you nead a new mb so you must go to htc service
It was quite common, when people were looking desperately for SU and were using CDMA soft.. Sorry to say this, but your diamond is a brick now, and only motherboard replacement will do. there are some hardcore people on this forum who are rescuing such phones, but I'm not sure if they are still operational. Search for JTAG on teh forum, or send it to the service. If it;s on guarantee, then you should be fine, as they shouldn't be able to determine what happened. Otherwise you can always zap the phone with a stunner, and presto, phone ready for guarantee.
your phone is dead bro, i will be willing to buy it from you, i need peices to fix mine, pm me if interested
hey dude, dont worry..u're like the umpteeth guy who did it..just refer to this forum forum.xda-developers.com/archive/index.php/t-488687.html..haha
I have long time ago also installed a CMDA-ROM accidentally. When the flashing procces ended I just got only the slpash screen (black without Rom Version Information).
I thought my Diamond was bricked but i could not believe it . After i had performed a hardware reset several times i used mitty and i could flash a ROM.
Now i have mostly a ROM as backup on my storage-card this in case it will go wrong during flashing procces.