Related
hello friends! Xcpuscalar doesnt work with samsung cpu !!!
So I ask you.. is there a way to overclock TyTN?
Thanx
yeah..install pocket mechanic pro
www.pocketgear.com
i overclocked to 450 MHz...but battery life decreased..
you can use ClockWizard I now this program works with samsung cpu
Thanx friends! I m doing some benchmarks with a friend that has a kaiser,, TyTN vs kaiser,, I'll do a bench with OC in Tytn too
byee
def would like to know of results
I have got xcpuscaler installed on my device and it works really well.... I have increased my battery life though it and the performance has improved so much.
Dale
giovanni72 said:
yeah..install pocket mechanic pro
www.pocketgear.com
i overclocked to 450 MHz...but battery life decreased..
Click to expand...
Click to collapse
Dont u mean pocket hack master? Here is there site http://www.wizcode.com/
I also clock mine at 450. I found a bug or something, system is totally stable at 450..and fast. But when i dial out and i clock it to anything other than standard clock speed. It will dial out fine but if i try to end, it still says dialing and u have to to a reset or else u cant make or get calls.
djstegges said:
I have got xcpuscaler installed on my device and it works really well.... I have increased my battery life though it and the performance has improved so much.
Dale
Click to expand...
Click to collapse
I heard that xcpuscaler isnt acurate, That u can set up like 500 mhz and TCMP and other software show it at a lower speed.
xcpucalar really doesnt work in samsung cpu! I did samoe benchs in 500 and 300 mhz,, and the scores are the same!
When my tests TyTn vs kaiser is finished I ll post to u...
Is there anything free?
demo23019 said:
Dont u mean pocket hack master? Here is there site http://www.wizcode.com/
I also clock mine at 450. I found a bug or something, system is totally stable at 450..and fast. But when i dial out and i clock it to anything other than standard clock speed. It will dial out fine but if i try to end, it still says dialing and u have to to a reset or else u cant make or get calls.
I heard that xcpuscaler isnt acurate, That u can set up like 500 mhz and TCMP and other software show it at a lower speed.
Click to expand...
Click to collapse
Pocket Hack Master is only good if you don't use the phone functions. This version is not stable if you want to use your phone AT ALL. Needs to mature a bit more before I'll continue to use it. TCPMP does show quite an improvement when overclocked, however.
So there's no a good way to overclock our TyTn
Is there a preferred tool/utility that's compatible with wm6 (if it matters?) that will let me overclock my hermes?
aliencurv said:
Is there a preferred tool/utility that's compatible with wm6 (if it matters?) that will let me overclock my hermes?
Click to expand...
Click to collapse
The only one I know of that works is pocket hack master
http://www.wizcode.com/products/view/pocket_hack_master
Have fun
Chris
I was under the impression that the Hermes wasn't really overclockable...
I played with the trial version of Hack Master, I set it up under/over clocked. I got some screen flicker when underclocked below 300mhz otherwise it seemed like it worked, I didn't try any benchmarks though. Give it a try. I'd be surprised if it doesn't work for you.
I don't know about WM6.1 though. I tried it on WM6
Chris
noellenchris said:
I played with the trial version of Hack Master, I set it up under/over clocked. I got some screen flicker when underclocked below 300mhz otherwise it seemed like it worked, I didn't try any benchmarks though. Give it a try. I'd be surprised if it doesn't work for you.
I don't know about WM6.1 though. I tried it on WM6
Chris
Click to expand...
Click to collapse
sweet thanx chris . i'll give it a benchmark and see how it works
I have seen somewhere that when you overclock hermes the bluetouth will not work.
aliencurv said:
sweet thanx chris . i'll give it a benchmark and see how it works
Click to expand...
Click to collapse
there is no way to overclock hermes. the procesor change it speed accord the needest of procesing. the can vary trougth 100 to 400 mhz. the hacker master software only show the speed but it doesn't change it on the procesor. this is the best way to safe battery power, cause less speed >>> more battery.
sorry about my english, i speak spanish
Kc SN said:
there is no way to overclock hermes. the procesor change it speed accord the needest of procesing. the can vary trougth 100 to 400 mhz. the hacker master software only show the speed but it doesn't change it on the procesor. this is the best way to safe battery power, cause less speed >>> more battery.
sorry about my english, i speak spanish
Click to expand...
Click to collapse
So your saying you can under clock with Hack Master, but it actually doesn't over clock above 400? I know it underclocked my hermes as I could see the screen flicker change with lower MHz. I'm gonna have to install their newest vers. and try some bechmarks. Unless aliencurv gets some results....
I can see that it would save battery with the underclock...
Chris
noellenchris said:
So your saying you can under clock with Hack Master, but it actually doesn't over clock above 400? I know it underclocked my hermes as I could see the screen flicker change with lower MHz. I'm gonna have to install their newest vers. and try some bechmarks. Unless aliencurv gets some results....
I can see that it would save battery with the underclock...
Chris
Click to expand...
Click to collapse
you cant change the procesor speed with any software. hack master only show you the speed that you have configured to change clock, but actually doesnt do anything.
the procesor speed is managed by itself.
Kc SN said:
you cant change the procesor speed with any software. hack master only show you the speed that you have configured to change clock, but actually doesnt do anything.
the procesor speed is managed by itself.
Click to expand...
Click to collapse
Try loading the trial version and drop your processor speed to 200mhz and see and feel the drop in speed. Your screen will flicker too. Is it changing something else. I know last summer it didn't support the samsung processor, but it is now listed and it definitely does something to my hermes...
Chris
Search In Hermes Forum
Do a Google search in the Hermes forum and you will find a thread that was dedicated to this subject. I believe the conclusion was that, at best, one of the applications to overclock could be increased by, at most, 10% before resets were required. That may have changed with the release of version 4.3? of Pocket Hack Master this past January.
Hi folks!
How can the HTC Hermes overclock. Did it with some tools tried, but rather less successful. Batteerystatus no, xcpuscalar, overclocked but not really at 472-500 MHz. And with the PHM I can overclock well, but then does my GPRS connection to the Internet no longer work.
Is there a way to change this?
Translated by Google
This has been gone over numerous times and no, you can't overclock the Hermes reliably....
f21270 said:
Hi folks!
How can the HTC Hermes overclock. Did it with some tools tried, but rather less successful. Batteerystatus no, xcpuscalar, overclocked but not really at 472-500 MHz. And with the PHM I can overclock well, but then does my GPRS connection to the Internet no longer work.
Is there a way to change this?
Translated by Google
Click to expand...
Click to collapse
i overclock before to 500mhz using XCPUScalar
ov2rey said:
i overclock before to 500mhz using XCPUScalar
Click to expand...
Click to collapse
Is it reliable?
f21270 said:
Hi folks!
How can the HTC Hermes overclock. Did it with some tools tried, but rather less successful. Batteerystatus no, xcpuscalar, overclocked but not really at 472-500 MHz. And with the PHM I can overclock well, but then does my GPRS connection to the Internet no longer work.
Is there a way to change this?
Translated by Google
Click to expand...
Click to collapse
Although it is possible to overclock Hermes it cannot be done relyabily or without damaging the CPU...
Some utilities may allow an active and practical overclock but I wouldn't advise it...
As you may know, if wou want your Hermes to be more responsive, performant, you can increase your ROM page pool size prior to flashing.
Cheers.
it might not be able to overclock.. but, should be able to keep the cpu locked at 400mhz and not throttle to lower speeds.. which would make it much more responsive.. I've been meaning to test this
Black6spdZ said:
it might not be able to overclock.. but, should be able to keep the cpu locked at 400mhz and not throttle to lower speeds.. which would make it much more responsive.. I've been meaning to test this
Click to expand...
Click to collapse
The CPU is always at 400mhz. Wtf are you talking about?
no its NOT always at 400Mhz.. it has auto speed scaling built in. something is not right with both tcpmp and gxmark benchmarks.. using the newest PHM I manually set the lowest possible speed of 251Mhz, and disabling built-in scaling thinking of past knowledge that it doesn't do anything to our devices. I should not see any difference right? well visually it is MUCH slower than setting it at 400Mhz with both programs showing the same score at both speeds.. this CANNOT be correct.. I can see it with my eyes a night and day difference.. 420 seemed stable but the scores were showing slower than factory clock.. whats going on here?
this has been gone over so many times in the forum its not even funny any more.
use the search facility...
yes I know, I've read the overclocking threads from two years past.. ever considered newer software might change things? It does identify the processor correctly as a S3C2442A. I still want to know the answer to why benchmarks aren't reporting correctly.. BTW this thread should be moved
here are some results.. with a fresh boot I loaded a 39306KB AVI movie in CorePlayer 1.2.4. I ran its benchmark and also timed it with a stopwatch. The benchmark reported 1.60Mbit/s @ 3 Minutes and 21 seconds, also correct on the stopwatch. 321994752 bits divided by 201 seconds comes out to 1.601 Mbit/sec just like their calcs. Now I opened pockethackmaster 4.33 and set the clock to 420Mhz and reran the coreplayer benchmark. Here's the wierd part, the test reported that it took 4 minutes and 2 seconds with a 1.33Mbit/s rate but in actuality it only took 2 minutes and 58 seconds according to my stopwatch. Do the match, thats 1.809 Mbits/sec real throughput. So overclocking DOES work.. pretty significantly if I might add, but it appears that the timers used in these benchmarks are skewed and not reporting accurate numbers. Someone else try some tests and back me up here.
silly post ;0
When i get a tilt I want to overclock my hermes 100 to 900MHZ and see how fast it will melt!! Just kidding
joshkoss said:
When i get a tilt I want to overclock my hermes 100 to 900MHZ and see how fast it will melt!! Just kidding
Click to expand...
Click to collapse
I tried to overclock my oven but after that it keeps buning all my food
Is this process reverseable?
I need too cook a roasted chicken tonight and i will get nothing but a pile of coal...
Please help me!
I searched both the forum and the wiki but couldn't find any answer.
Cheers.
Kevlar-Source said:
I tried to overclock my oven but after that it keeps buning all my food
Is this process reverseable?
I need too cook a roasted chicken tonight and i will get nothing but a pile of coal...
Please help me!
I searched both the forum and the wiki but couldn't find any answer.
Cheers.
Click to expand...
Click to collapse
Just take it out really fast, lol.
6 months ago, i tried to overclock my hermes and then it was broken. i mean touch screen cant be touched=)) but i dont know is it about overclocking. just share my experiment
Kevlar-Source said:
As you may know, if wou want your Hermes to be more responsive, performant, you can increase your ROM page pool size prior to flashing.
Cheers.
Click to expand...
Click to collapse
But then you lose Ram, and when you only have 30 or so mb's of it to start its a crapshoot.
sure, it might make some of your videos or games faster but you'll most likely have problems with any data connection
PHM can brick your phone to an irreversable state, and xcpuscalar falsely shows an increase in processor speed. Battery status will not work for the hermes, and I don't think there is a program that will overclock a hermes CPU. As for the not constantly running at 400mhz, that is not a bad thing. Think of it as a P.C., when you are not running apps, there is a system idle process that occupies the majority of the processor, meaning that not all of the speed is utilized. If this is the case, that means that the processor is not running at full speed. Same goes for the Hermes, however there is no system idle process, just a slower clock speed. When you open an app it will reach, but not go over 400mhz.
pleas see attached zip file
this program give you the ability to overclock the hermes up to 420Mhz
i tested it - and at 420Mhz the device becomes slower and some minor flicks of the screen
i went back to 400Mhz and the device went back to usual operation
regards
edward
I too have tried various clock speeds but at the end of it all i left it default as the device was too unstable.
Also I have of course continue my attempts to overclock Hermes, but I am no satisfactory conclusion. At the moment I use xcpuscalar have all possibilities of tuning 500mhz switched on and it is stable. A benchmark I have not done, so I do not know exactly whether he has speed. But the belief puts mountains.
translated by Google
I wonder if someone knows a soft that allow to overclock, but most of all UNDERclock the HTC diamond.
As it consumes a lot of power, it may be usefull to have a soft that underclock the CPU when you don't need a lot of resources, so battery would last longer...
Very good idea. I guess you have to be able to access the BIOS in order to change the clock frequency though.
Search brada before u post:
Sorry for being such a jerk but: OVERCLOCKINNN
ehehehe
this is an old thread but for ppl who are searhing, use this keyword
NUECPL CLOCK CONTROL
and also
go and read the wiki about RADIOS
and how they can help you save batt
There is a overclock test going on at nuerom!
He finally managed to overclock some MSM72xx devices,
although right now it's only a beta test some results has been successful.
For now it's only possible overclocking to 768MHz
http://www.nuerom.com/BlogEngine/post/2009/09/07/nueOverClockTest.aspx
Please read first the official News over at nuerom and try at you own risk!
Ikkari said:
There is a overclock test going on at nuerom!
He finally managed to overclock some MSM72xx devices,
although right now it's only a beta test some results has been successful.
http://www.nuerom.com/BlogEngine/post/2009/09/07/nueOverClockTest.aspx
Please read first the official News over an nuerom and try at you own risk!
Click to expand...
Click to collapse
Yeah, i read it but i don't understand the instructions, how to i test it?
From reading the comments its still a no... but a step in the right direction I guess... 600Mhz would do for me... smoooth up You Tube and general response time would be great!
isnt this the same as this?
http://forum.xda-developers.com/showthread.php?t=507301
info5i2002 said:
Yeah, i read it but i don't understand the instructions, how to i test it?
Click to expand...
Click to collapse
Just install the cab and start nueOverClockTest in you all programms
folder.
same
Pressed the icon and the same results just a striaght of crash/restart wonder why he cant step the over clock speed down abit it would be good to see this running for a little while,
Id be hapy with 600mhz as well lol thats not being greedy hope this comes true i had an samsung omnia i900 and used to use it all the time then i overclocked it using software and damn the phone was fast even animations like flash and divxs loaded fast, great for kinetic scrolling to,
Hello
Thanks for the link
Will test it !!
edit : doesn't work for me freeze
miniterror said:
isnt this the same as this?
http://forum.xda-developers.com/showthread.php?t=507301
Click to expand...
Click to collapse
no it's not the same, this application is for overclocking.
But it's from the same guy ^^
does not work for me as well maybe 768mhz is just too much
is there any possibility to use for example only 650mhz?
It seems to help to disable radio (only Phone OFF) and plug the phone into the A/C charger.
This is a very early test version ....most users at HTC Diamond an Xperia confirmed that it works.
More tweak options ...lower/higher CPU speeds will follow, like i said this is a very early beta but it seems promising. For now it is only 768MHz .
Hi, work me it "works".
You have to disable all plugins on today (touch flo, titanium) and then it works.
In SK tools integer benchmark I get 485 points, 331 on standard frequency, which is I mean huge difference. But solitaire works for 5sec, then freezes. Igo 8 loads to main screen and then freeze....
GSM Touch HD
iam try to oc my blackstone but my phone freez at every time when i try it... (turned on/off radio, with/without ac adapter)
jura55 said:
Hi, work me it "works".
You have to disable all plugins on today (touch flo, titanium) and then it works.
In SK tools integer benchmark I get 485 points, 331 on standard frequency, which is I mean huge difference. But solitaire works for 5sec, then freezes. Igo 8 loads to main screen and then freeze....
Click to expand...
Click to collapse
Do you tested it on a Blackstone?
Be sure, on my Blackstone,with EnergyROM 30.8.2009.
I've been using it by now about 5 hours on Xperia X1. These are the results of the benchmarks (from sk tools) with v.1.3
NO OVERCLOCK (528mhz)
Integer: 320.2148
Floating point: 7.366
RAM Access: 1404
Draw bitmaps: 603
Main storage (write): 1953.55
memoria principal (leídos) 5228.94
OVERCLOCK (768mhz)
Integer: 478.6538
Floating point: 11.171
RAM Access: 1203
Draw bitmaps: 775
Main storage (write): 2271.35
Main storage (read): 5879.43
I'm using a cooked rom with windows mobile 6.5. Windows now works a lot better, not as choppy as before, photos are loading a lot faster and I get about 5-15fps more on the psx emulator. Overall it works great, but keep in mind it's not really stable. It freezes with ease.
And I had to disable my Phone on comm manager (the option between fly mode and bluetooth) if I don't it freezes. But once you run the overclock you can turn it on again and it works perfect.
Hey sorry duplicate post, don't know how to delete it :-|
how long have you been running it for? And have you noticed any increased heating? I expect that there will be...i'm just slightly worried that extended use will kill the Blackstone =/
What do I have to do to get 768MHZ?
Just install the cab and start the program?
Hello,good software to destroy your HD ...
Alright Marcdu81
we got two options here:
Your post is just senseless and absolutely unnecessary.
or
You experienced some difficulties after installing this software, maybe it even harmed your HD.
If that is the case you should state more precisely what happened in order to help avoiding things like that in the future!