Hi,
I made the mistake to buy JasJar in Italian and now I'm late for all upgrades. There's the possibility to change language into English?
Thanks
Stefano
sure ... try the new qtek 9000 rom
I've tried
Hi, I've tried with WWE Rom but installing I get an error due the different language.
Thanks for help me.
By the way....
.... I've not qtek but Imate JASJAR.
Thanks
here you have a step by step
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=
I'm unable
Hi I've done:
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
At this time I recieve a message that says me:
ERROR 120: CONTRY ID ERROR
The ROM inage that you're trying to use is not designed to work on your device. Please check the vender Web site and download the correct ROM update.
What I can do?
Thanks
run again the
MaUpgradeUt_noID for the upgrade
I'm sorry to disturb you but I?m not able. I've tried to run MaUpgradeUt_noID but appear a message saying me that is not possible run the selected application as RUU.dll was not found.
I've copied MaUpgradeUt_noID in the same directory of the ROM file. Is that right??
Thanks and sorry.
May be the problem is:
1b. unzip the exe file to a directory
Is posible to unzip to a directory? I run the .exe file and I see that file decompress but I don't know where.
The problem is that I put MaUpgradeUt_noID in the .exe directory and due to that I have error message.
is there a program that unzip an exe file?
Thanks
Download winrar. Right click on the file and select "extract to...."
Can you please backup the content of the "windows" directory before upgrading? It should contain all the certified .mui files for the italian localization already signed and ready to work in the wm5 jasjar environment. Then put a zip file in the upload area of this forum. I would like to experiment a little bit with the italian localization.... 8)
I just performed the upgrade without any glitch.
Now I have the last english.ROM
Now the only problem is that special symbols on the keyboard are wrong.
I'm sure there is a registry hack that switches the keyboard back to my italian keyboard (I have an italian JasJar).
Do you know what key should I change and what value should I put there?
Thanks a lot,
Francesco
Was not possible to copy
Dear Topogigi,
Thanks for the suggestion about winrar. Now is OK.
I was not able to copy the windows directory as I get some error copying. Sorry.
Ciao
DONE!!!
Dear all, I got it!!! THANKS FOR YOUR HELP.
Now I've a small problem: Keyboard. Italian KB has differente layout than WWE. There's way to solve this problem? For example, @ is FN+Q and in WWE is FN+2...
Thanks for all!!
I wanted to extract a CAB file from a windows .exe file. How can I do it? I wanted to extract the CAB file for easy installation without running it from my computer.
cktlcmd said:
I wanted to extract a CAB file from a windows .exe file. How can I do it? I wanted to extract the CAB file for easy installation without running it from my computer.
Click to expand...
Click to collapse
Very easy,
launch the executable from your pc without the ppc connected to the pc.
Activesync will be launched, it will try to connect to the device and will say that the application will be installed next time the ppc will connect.
Go into c:\program files\microsoft activesync\[application]
you will get your cab file
Then
go into registry HKLM\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnConnect
and remove the value : CEAppMgr
Cheers,
.Fred
dotfred said:
Very easy,
launch the executable from your pc without the ppc connected to the pc.
Activesync will be launched, it will try to connect to the device and will say that the application will be installed next time the ppc will connect.
Go into c:\program files\microsoft activesync\[application]
you will get your cab file
Then
go into registry HKLM\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnConnect
and remove the value : CEAppMgr
Cheers,
.Fred
Click to expand...
Click to collapse
Thanks very much.
is it possible to do the extraction on ppc without the pc
AbuYahya said:
is it possible to do the extraction on ppc without the pc
Click to expand...
Click to collapse
Since the executable is a PC application, I don't think you can except if you know exactly where the cab file begins and ends in the setup. I think the simpliest thing to do is what I mentioned.
Cheers,
.Fred
CAB extract
you can also extract CAB files from EXEs using WinRar.
Just right click on the A.EXE file and you will see *extract* (if you don't see this option, then you can't extract the file - I had this problem with MS Voice Command 1.6)
Once the A.EXE has been extracted to your desired folder on the desktop PC, you can then find the CAB file and simply copy this to your PPC (without having to use anything like ActiveSync or installing any software on to your desktop PC). Run the CAB file on your PPC to install.
I hope the above helps!
firstbuddha said:
you can also extract CAB files from EXEs using WinRar.
Just right click on the A.EXE file and you will see *extract* (if you don't see this option, then you can't extract the file - I had this problem with MS Voice Command 1.6)
Once the A.EXE has been extracted to your desired folder on the desktop PC, you can then find the CAB file and simply copy this to your PPC (without having to use anything like ActiveSync or installing any software on to your desktop PC). Run the CAB file on your PPC to install.
I hope the above helps!
Click to expand...
Click to collapse
or you can run the exe with the ppc connected ,make sure that you have a sd card in the device.the promp comes up asking were you want to install the app, do nothing,got start, file explorer and browse to; windows\appmgr [in the ppc] and your cab file will be there in a folder,simply copy to another location.then go back and cancel the installation
just a thought, the ppc application might be installed in its own folder in program files not necessarily the activesync folder so u'd find the cab file there..
I always extract files from a CAB file with WinCE CAB Manager to make the installation easier and make the application install to Whichever folder I want.But some files of the applications must be put into some folders,such as \Windows,\Appliction Data.And I will know what the installaion do to the registry.
I found it impossible to extract a CAB file from a windows .exe file on PPC,and extract files from a CAB file without installation on PPC is also impossible.
Howto extract Cab. file from EXẸ file in linux
Bcause I am now using linux laptop(fedora6). So does anyone know which app in linux can extract CAB. file from EXE file ?
gerisgame said:
So does anyone know which app in linux can extract CAB. file from EXE file ?
Click to expand...
Click to collapse
Just use the cabextract utility.
I can not extract EXE file by using cabextract
I try cabextract tool, but this tool only extract .CAB file, it can not use for extract .EXE file. What I want is a tool in linux can extract an windows .EXE install file to .CAB file so that I can install ppc software directly from my linux machine. Any suggestion? THX advanced.
extract PPC CAB in Linux
It's not a 100% pure Linux solution, but this works for me. I have tested this on my Edgy Eft Ubuntu box. I don't know if it will be the same on Fedora, but it should be similar.
Get the latest Wine install from winehq.org. I got rid of my old .wine folder to make sure I was using a clean install, so you shouldn't have to do any additional installs or tweaks to wine.
Disclaimer: Don't expect this to work for actual syncing, only for getting the CAB files.
Get a copy of ActiveSync and install it under wine. I tried versions 3.0 and 4.2 and both worked. The version 4.2 installer failed at the end trying to update some USB drivers, but the files were all there and worked.
Again using wine, run your PPC installer program that you want the CAB from.
Like earlier posts in this thread pointed out, the CABS should end up in a subfolder of C:/Program Files/Microsoft ActiveSync. On my system, these are under my .wine/drive_c folder.
Good luck,
Andy
thank you Andy,
I will try in my fedora and post the result as well.
OK, I saw cab files it in ./wine/Microsoft Activesync folder. Thank again Andy.
extract .cab in linux -
synce.org , orange tools
gerisgame -- I'm glad it worked for you! If you don't mind compiling from source, the Orange tools kevit specified work without all the Wine/ActiveSync business.
kevit -- Thanks for your comment about Orange tools. I had been over at the synce.org but never saw them.
Once I had the right libraries, they built cleanly and work like a charm on the files I've tried.
Andy
Orange and synce
Thank you both Kevit and Andy, I will try that way. If it works, it is more straight and better way.
I try Orange tool in my fedora laptop, but it does not work, belows is my command line:
[[email protected] Pocket2005]$ orange pqdvd.exe
-------
0 files
I can not find a documentation for orange tool, pls help. THX
I thought that pqDVD was a regular desktop application.
If so, orange tools probably won't help. pqDVD may install and run under wine, though.
Any idea?
Did a quick searc and didn't find it...
Get cab file. Open with winzip. Look in _setup.xml file for the filenmes. extract all using winzip and rename according to the filenames in the _setup.xml.
Easy peasy.
Psi
if the rom is an exe, how extract the Cab?
There are no CAB-Files in a ROM.
Only in a Extended-ROM.
I've extracted the cab from the exe, and extracted a nbf file from it... But now I don't know how to continue...
I have searched the tforum and not found an answer.
i have installed Miri's 6.5 rom, and cant get a java jar or jad file to work, keeps telling me there is no application set for this file type, so how ccan i rectify this, i have tried downloading the esmertec jbad 20081203.1.2.zip, which im guessing would cure it.
but what do i do after i have tis file on my pc hdd, i have tried coping it to the mem card then extracting it, still no joy.
does anyone know of a java cab file.
if not could someone give me instructions (idiots guide version) on how to get this esmertec one to work.
much thanks
Gh! If it is *.zip file you must open it and see what is inside:
1- *.cab file: copy this *.cab on PPC and install it (tap on the file)
2- *.exe file: Sync the device then you must extract the file on PC e 2clicks on it by PC (follow the istructions)
If it is a *.cab see point nr 1)
D'rath
Some exe ROM don't be extracted before flash to PPC, ie : Asus P552, P835, ZincII, nuvifone M20... How to extract them. And how to recreat exe ROM after editing something?Plzz help me!
Are you saying you want to take the ruusigned.nbh file (the actual rom) from the .exe files you sometimes get?
Open it with winrar and find the ruusigned.nbh file and drag it out
no, not HTC Phone. I want to extract some Asus ROM .exe such as P552, nuvifone M20