Develop Bugs

Lits of ROMs ?

Hi fairly new here is there a list/table/Database of all ROMs available on tghis site other than the FTP directory, that also gives some info on what is in each , compatibility, comments form users ???
Seen a lot of Different lists in different places but trying to summurise them all as a newbi is almost imposible.
I bit the bullet and up graded my T-Mobile (german Keyboard) which had O2 OM 1.13.48 WWE Rad 1.04.02 Ext Rom 1.13.139 WWE in oit already when I bought it.
I used I-Mate Rom 1.30.68 Rad 1.09.00 Ext Rom 1.30.153 WWE
Which I managed to load with out to much problem Thanks to many helpfull post here. I did find out that I can not unlock the extended rom now, which if I had read a little bit more or better I would have noted as a known issue with this rom. It also was totaly unstable when I loaded SpB today plugin on top of Full RESCO suite that of course has its on Today Plug in. Once I removed the RESCO today Plugin (left all the other resco stuuf) it was fine.
How ever before I start loading all my other stuff to fine tune it.
I seek some advice. What is the Best ROM available at the moment? suitable for my unit. I dont care about Keyboard layout it was mapped correctly when I got it but when I did a fuul boot after a problem it reloaded the O2 sftware but the Germany key board was mapped for QWERTY. Now I am living with it. At some point I will learn how to remap it back to the QWERTZ.
Is the Developers Special ROM for me?
or one of the AUK3 or UNI_AKU3_2_WWE_IVAN_beta8
I have just read there is an Orange ROM with new Radio?
I would stay with what I have now but I do want to unlock the rom and I think that the rom I have installed has been surpassed by many newer ones.
HELP just a bit of advise Please?
Many Thanks
Condex

[HKEY_LOCAL_MACHINE\nls]
"DefaultACP"=dword:000004e4
"DefaultLCID"=dword:00000407
"DefaultOCP"=dword:00000352
"SystemLCID"=dword:00000407
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Clock]
"GMT_OFFSET"=dword:ffffffc4
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
"Layout"=dword:00010407
These ^^ are the values responsible for timezone, default codepage and keyboard layout. If you change them to the values you need for your special case, your keyboard problem is solved.
BTW the values at the top are for germany.

QWERTZ Keyboard settings
Lt.Cmdr.Ivan said:
[HKEY_LOCAL_MACHINE\nls]
"DefaultACP"=dword:000004e4
"DefaultLCID"=dword:00000407
"DefaultOCP"=dword:00000352
"SystemLCID"=dword:00000407
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Clock]
"GMT_OFFSET"=dword:ffffffc4
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
"Layout"=dword:00010407
These ^^ are the values responsible for timezone, default codepage and keyboard layout. If you change them to the values you need for your special case, your keyboard problem is solved.
BTW the values at the top are for germany.
Click to expand...
Click to collapse
Thanks for info bit over the top of my head in places, will take a look at my register and see what I can make of it.
Many Thanks

Help a Noob

Hello there, yes... I'm a n00b when it comes to ROM upgrades.
I'm relatively experienced when it comes to computers and PDA's, but browsing through this forum, I have to admin, I'm lost...
I have an Orange M5000, locked to Orange (I think). Can anyone give me some simple steps of what I should do to upgrade to the latest and fastest ROM version? (I'm currently on 1.30.90 - R1.09.00).
Help would be much appreciated.
**EDIT** Okay, so the instructions are these ones right -
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
But what ROM should I be using? Thanks.

You might want to try the link at
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
at Orange UK for the proper way of upgrading to the official ROM, which is an EXE file. That's the easiest.

If you want to get going with the newest ROM's (and are prepared to take the associated risks!) then my recommendation for the process you should follow is this...
First, download the tool at: http://www.buzzdev.net/index.php?option=com_remository&Itemid=100&func=fileinfo&id=288
Follow the instructions in the .rar file. This will SIM unlock your M5000 so that you can use any SIM card in it, but also makes your M5000 "SuperCID" - Meaning that you can upgrade to ANY HTC Universal ROM (QTek, O2, imate, etc, etc) without all the hassle!
Then:
1) Download whichever ROM you're interested in
2) Put your M5000 in bootloader mode (by holding the Backlight and Power buttons while poking the reset button).
3) Connect your USB cable to your phone and PC
4) From your downloaded (and extracted) ROM archive you need to run "MaUpgradeUt_noID.exe" or "ROMUpgradeUt.exe" - whichever was included - it won't matter because your device is "SuperCID" so you wont get any of the Country or Device errors that people often complain about.
Wait for 5 minutes while it all ticks along, do a hard reset, and you're all done!
You may find that your device still installs a load of unneeded cab files after the initial setup. This is because of the "Extended Rom" area where manufacturers put all of their own modifications.
You can use the tool found here: http://www.buzzdev.net/index.php?option=com_remository&Itemid=100&func=fileinfo&id=205 to unlock the "Extended ROM" and the cab files found here: http://forum.xda-developers.com/showpost.php?p=985428&postcount=373 to make it visible within File Explorer.
Then you can delete any (or every) file that's in there. I'd strongly recommend deleting everything if you'll be trying out an AKU3.X or WM6 ROM.

Okay, but I think Orange are a bit behind things...
I was about to try 2.04 PDAVIET UNI PRO. Is this a bad idea for me?
**EDIT** To the second reply, thanks, I'll give that a go

Basically, don't try using any Crossbow ROMs if you need your device for anything important. They're far too flakey at the moment (even the half decent ones).
Go for an AKU3.3 ROM for stability and speed (or possibly AKU3.5 - though they're a little bit buggier).
Crossbow ROMs will get better. Come back for that in a month or two (or three....four.....)

I wouldn't say I do use it for anything important... 1 or 2 calls a day (not business) SatNav once or twice a month. The calendar and ListPro are probably the most used things on my PDA...
Speed is what's annoying me at the moment though. It takes so long to redraw the screen when I spin it for example.
Where can I find an AKU3.3 download then?

Sorry, work tore me away from the forum for a while...
Go here: ftp://xda:[email protected]/Universal/Cooked_ROMs/
There are four folders in there where you'll find a mixture of AKU3.2, 3.3, and 3.5 ROMs by Helmi, Ivan, JWright, and Indra. Personally, I like stripped down ROM's so my own favourite is Helmi's V1.3.1 ROM.
There are plenty of other opinions if you look at the related threads though...
Helmi: http://forum.xda-developers.com/showthread.php?t=284887
Indra: http://forum.xda-developers.com/showthread.php?t=285488
Ivan: http://forum.xda-developers.com/showthread.php?t=287270
JWright: http://forum.xda-developers.com/showthread.php?t=279258
If you have a look at the first (and possibly second) post in each of those threads, you can see what's in the ROM and what isn't. Take your pick. As far as speed goes, you will find all of them are noticably faster than any of the official Orange ROMs.

I've actually successfully installed WM6. It's a lot quicker than WM5, so I'm happy

Yep, WM6 is a lot faster than the official WM5 ROM's.
The WM5 "AKU3.X" ROM's are even faster though and - for now at least - generally less buggy...
Looking at how you say you use your phone, you shouldn't find too much to worry about with WM6 - even this early on (and it looks nicer!).
Glad it went ok for you!

Sub69, Thanks, thanks, thanks!!! My problem was solved with the backlight + power + hard reset... A million thanks friend.
Looking to become a regular member here. With a little time hope I can contribute something meaningful as well

Stable WM6 with Japanese Support

Ok so off recent reading it seems that many people that have followed the steps in "Make your X01HT a WM6 Device (for Gaijins)" have unstable devices. Please complete this poll, and if you have a stable (one or less crash a week) please tell us how. It seem that many people here are Stuggling to get a stable WM6 that supports Japanese.
My Black Majik ROM and every other ROM before it crashes 4 or more times a day!

to stop crashing cook in Japanese support??
look at this (from Make youe x01ht a wm6 device) from my last post there.
I wish somebody could figure this out. Anyway, at the moment, the cooked lvsw with built in Japanese support works best. Although it is a little slow. It has not crashed for 2 days solid -- no matter how much I have thrashed it. Every single other English rom crashes.
Therefore, it is possible to make a stable wm6 with Japanese support -- just how!
-----------------
Yep I installed the Japanese input enabled version of LVSW. Some things I noticed were that it was modified to install the Japanese stuff (including character input, mslite, fonts, x02ht setting for softbank Japan, etc) following flashing, i.e installed these setting automactially from the extended rom. Now, I am wondering why the thing is so stable. It has not crashed ONCE in the 24 hours I have been trying to crash it.
Funny because every single other English WM6 rom, including the same version of the LVSW rom I have installed have all had terrible problems with random crashing etc; the only difference being that I followed instructions from the beginning of this thread to install the Japanese.
My question: how do we set up English roms so that they automatically install Japanese stuff (including x01ht settings for Japan) from extended rom following flashing?
Very strange that doing it this was could make it so stable. Unless of course, there are newer/more stable versions of a lot of the software links that appear in the original thread?
Ideas please! Would like to solve this enigma.

tora201, where do you download the Japanese input enabled version of LVSW ? I'm really tired of frequent crash and would like to have a really stable ROM.

rickywck said:
tora201, where do you download the Japanese input enabled version of LVSW ? I'm really tired of frequent crash and would like to have a really stable ROM.
Click to expand...
Click to collapse
http://rapidshare.com/files/39953635...WWE_3.30.3.zip
See #89 onwards of "make your x01ht a wm6 a wm6 device"
And, yeah, it is extremely stable. I have installed the HTC home plugin thing as well as the new touch dialer, etc. No problems at all! Cheers mate.

I use LVSW 3.30.3 English ROM with LetsJapan and JapaneseIME (both by Asukal) installed...
Generally, phone seems stable, but then after switching to any of Japanese IMEs (Tegaki, Romaji...) trouble starts... Worst problem is that sometimes SMS and MMS freezes the phone, for example, on message reception. It is even worse by the fact the incoming message is then lost forever!
For some people, switching to Japanese input everyday is essential, and of course, messaging too... these two things seems to clash on all ROMs (some seems to be much more stable than the others).
What we need here is more stable Japanese font & input method package to do things properly... We need Asukal

tora201 said:
http://rapidshare.com/files/39953635...WWE_3.30.3.zip
See #89 onwards of "make your x01ht a wm6 a wm6 device"
And, yeah, it is extremely stable. I have installed the HTC home plugin thing as well as the new touch dialer, etc. No problems at all! Cheers mate.
Click to expand...
Click to collapse
Thanks, but the link seems not working, could you post again ?

Stable CJK system
My experience :
1. Install Asukal's echinaNo5a to support Chinese, Japanese and Korean.
CJ fonts are included.
1.1 move&over write /Temp/wince.nls to /Windows
1.2 delete the startup menu's "usemynls?".
2. Install A4&Hanwan to input Chinese input and Atok to input Japanese.
3. Install other stuffs: Genocide Today, KPCapt, MMSLite265, JJ Pimp My Black 0.2,SQLCE 2.0, AozoraKoneko
I am using Elf_Edition_v2.1 based on LSVW 0519 ROM switching from Black 3.0.1.
It usually works several days for me and surely randomly locks too, but is mostly stable one ever
If anyone teaches me how to cook a ROM, I can make it.

I've tried it and it seems that it is quite stable, but I can't connect to the Internet via GRPS/3G. I've tried to delete the Softbank setting but it didn't seem to work.

http://rapidshare.com/files/40804243/RUU_signed.nbh.html
here you go! Just the nbh file.

Thanks for your replies and votes. Many others here seem to have crashing/freezing problems, just wondering why you all (except me and one other) said that your PDA is stable?
My Black Majik ROM has been better recently, but not what I call stable, recent crashes:
Thurs-0
Fri-4
Sat-0
Sun-0
but I don't know why.
I expect a phone to be completely stable, not mostly stable, not like old versions of Windows, like XP very rarely crashes, sure programs crash but I think it is a major programing/design error when the OS fails and the only way out is a reset.
People have all sorts of problems, quite often linked to the software they install(in this case Japanese support software), but I don't see how this software stops the OS from working, if there is a problem with SPB mobile or any other sotware then that software only should crash within the OS and leave everthing else alone, not take down the whole system, unbelievable!

pre-cook Japanese into the external rom in wm6 english??
rockyV said:
Thanks for your replies and votes. Many others here seem to have crashing/freezing problems, just wondering why you all (except me and one other) said that your PDA is stable?
My Black Majik ROM has been better recently, but not what I call stable, recent crashes:
Thurs-0
Fri-4
Sat-0
Sun-0
but I don't know why.
I expect a phone to be completely stable, not mostly stable, not like old versions of Windows, like XP very rarely crashes, sure programs crash but I think it is a major programing/design error when the OS fails and the only way out is a reset.
People have all sorts of problems, quite often linked to the software they install(in this case Japanese support software), but I don't see how this software stops the OS from working, if there is a problem with SPB mobile or any other sotware then that software only should crash within the OS and leave everthing else alone, not take down the whole system, unbelievable!
Click to expand...
Click to collapse
Mate, here is a sort of copy of my post in the "Make your X01HT a WM6 Device (for Gaijins)" (in wm6 hermes forum).
I have not heard anything back about my inquires, so I am posting it here with a few changes/comments. Note, I am using a x01ht and live in Japan, so I am using the softbank network.
I had the same problem as many others: when using WM6 (An English version) with Japanese language cabs/MMSlite etc installed AFTERWARDS using the guides on this board, they ALL crash, in one way or other.
This is strange because The Samurai build (beta 1/2) (Japanese cooked rom) worked perfectly! What is going on here? I wish there was away to convert it to English (I mean the GUI only). Then I would be in PDA heaven.
Overall, I have found that all Japanese language wm6 roms have worked better than with English ones installed with Japanese input/language support. Anway reasons/ideas why this would be would be most welcome......
Some typical crashes with English WM6 builds with Japanese language/fonts/mmslite 2.65 or 2.75 installed aftterward：
- MSSlite crashes A LOT (the whole thing freezes, then upon re-set, half the mail in the inbox is gone -- or the MSSlite programme itself is gone and needs a reinstall).
-crashes A LOT using explorer. No reason at all. Again, it just freezes. Freezes more with wifi.
-sometimes crashed on the comm manager screens, or in settings.
The point is, the thing crashes A LOT under WM6 with Japanese support installed later, following any of the guides here.
Anyway, in the end I went with Hermes_WWE_3.30.3.3_4_X01XT (Latest LVSW wm6 in English with Japanese support cooked in to install settings upon first boot via the external rom)
http://rapidshare.com/files/39953635/Hermes_WWE_3.30.3.zip
It works fine. Not one crash over a week! And believe me, I have tried to crash the thing. I even installed the touch HTC plugins.
Basically, the difference between this and other wm6 roms is that all the Japanese support was cooked in to install via the external rom upon the first boot. So, my question is:
Since somebody (A Japanese guy) made this, it should be possible to make a similar Black version (for example) with built in Japanese language/mms/softbank settings set up to install automatically via the external rom upon first boot. Anybody know how to do this?
If we can do this, or somebody post a guide, it would seem to solve all our problems.

I'm guessing that maybe we take a copy of the Ext_ROM from the one you're using, install another English ROM, and then copy the EXT_ROM over, and hard reset it to kickstart the auto setup process. What do you think?

I tried it in Black Majik, and had to run the Ext_ROM manually, but nothing changed, even after a reset! No connection, fonts, nothing!
You've got to edit a file in the Windows directory to enable it, I see. When I get time I'll have a go...

hamster0914 said:
I'm guessing that maybe we take a copy of the Ext_ROM from the one you're using, install another English ROM, and then copy the EXT_ROM over, and hard reset it to kickstart the auto setup process. What do you think?
Click to expand...
Click to collapse
Would that work?? Oh, my phone is locked so I can't do that! :-( its the post April softbank one. Damn you softbank! Can somebody else try that??

****! This ROM is Magic!! How made it?
Only problem is that it's slow, if compared with Black. Can anybody cook a black ROM with this incredible Softbank support?
Please!!!!!

hamster0914 said:
I tried it in Black Majik, and had to run the Ext_ROM manually, but nothing changed, even after a reset! No connection, fonts, nothing!
You've got to edit a file in the Windows directory to enable it, I see. When I get time I'll have a go...
Click to expand...
Click to collapse
You mena that if if you run all the .CAB of the extended ROM, 1 by 1, in the proper order; nothing changes?

Yes, that's right.

hamster0914 said:
Yes, that's right.
Click to expand...
Click to collapse
I checked the ROM carefully ... All the Japanese support is cooked into the ROM, not via Extended ROM.
Or that boy cook new ROM, or we can't do anything. Anyway ... I think that it's extremely slow for be WM6.
Saludos

Great! Kind of.
It is good to know that I am not the only person who has had chronic trouble with installing Japanese support in WM6. I have tried quite a few ROMs, Black 2.5 through Dymond, as well as a few LVSW, and have had random lock-ups and the SOD on all of them. I keep going back to my Japanese WM5 ROM for the stability. I've got a three-day weekend coming and will report back after flashing Hermes_WWE_3.30.3.3_4_X01XT with anything I find out about this baked-in Japanese support ROM.
To sesaru, I have noticed that LVSW is routinely slower than Black - even without any Japanese support issues.

the rom is slow, but it is completely stable. I wonder how it was made? It certainly shows it CAN BE DONE. I have not had a single lock-up since I installed it. So.... something going on here. Nobody can figure it out? Oh, and for the record, it installed all of the Japanese stuff from the external rom upon first boot (the 3 second thing). So, I wonder why does Japanese work without crashes if installed automactially upon first boot via external rom??

I need a little help please...

Hi,
I'm completely new to all this but I have done my best to try and figure it all out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"+soft reset to see if I needed to install a hard SPL : I do.
I've downloaded Des' Crashproof (due to the reassuring name) SPL.
I can now install that by following the guide without backing anything up yet (correct me if I'm mistaken)...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right?
If I'm not mistaken and I can now install any ROM, which English ROM is the best?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
One last question ; does installing an update to WM6 require a product key or registration of any sort like Windows on the PC or can I just flash and use freely?
If anyone takes the time to answer any of my questiions I would be very grateful. Thank you in advance.

Yes, install the ROM you like.
Best ROM? impossible to answer - lots of good ones about - try bepe black and blue karmba, mary - any recent English ROMS.
Although you do not NEED to install another radio - you probably SHOULD because your battery life under WM6 will be terrible with your current radio.
I would recommend 1.46.00.11 - although an radio from 1.41 upwards should be OK with SFR and on other networks in other countries. (I'm an SFR customer and connect in Belgium, France, Switzerland, Italy, UK etc.)
You will not need a licence key key to work with WM6.
Happy flashing.

Thanks for the answers!
Ok, well I'll give it a go when I'm a little less tired and report back...
One last thing, the battery life under WM6 comment got me wondering, is it worth the hassle (WM6 that is)?
I would guess so considering all the WM6 ROMs that people have gone to great lengths to make...
All opinions are welcome and appreciated.

Issue with Dialer and Contacts under wm6.1

Hi All !!
First - Thanks alot for this forum! it's the BEST!
I'm currently using PDACornerPro.V27 on my TyTN. but the same error happend with Schaps, Corner v20 and another TouchFLO rom.
Whenever I install Paragon LENG hebrew support on my device it just disables any way of accessing the Phone Dialer and the Contacts. Removing it doesn't work either, once installed - it f#$ks it up for good.
I've tried searching the registry with no luck whatsoever...
Can any of you Hermes Gurus help me out here?
Thanks!

hebrew on tytn wm6
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594

Thank you so much!
haven't tried it yet since it requires me to flash a new rom, I'll get to it this weekend.
anyhow, thanks alot, it's nice to have a supporting community.

bekef dude
u know u can hard-reset right? that way u dont have to flash anew rom
but if u feel like changing anyways i recommend this ones:
http://forum.xda-developers.com/showthread.php?t=428597
http://forum.xda-developers.com/showthread.php?t=439973
i use the last one cause its lighter but if u dont feel like working much go with the first it has everything plus youtube and google maps etc.

Yeah, I know I can Hard Reset.. but I've been meaning to change to a new rom for sometime now, and Hard Reset will make me install everything all over again so I used the opportunity to flash.
I have a problem with the hebrew, Maybe you came across it too - after installing the hebrew, When I press the power button the device goes to standby and when I press the power again it doesn't get out of it until I soft reset it...
It renders the device quite useless..
P.S I've flashed the device with the rom u've recommended. it's reallllly fast.

Tytn Doesnt wake up
its a known issue hate it when that happens
you can read more here:
http://forum.xda-developers.com/showthread.php?t=273836
it happened to me a few times i still havent figuered out why,
but thebest solution is to change the rom,
try falshing another rom i'm working with the lighter one ive posted and it works smooth havent tried the other so i guess thats the one you flashed.
good luck

No luck... so far I've tried with 4 different ROMs and didn't succeed in any attempt, I've tried both of the ROMs you've recommended, PdaCorner v.27 RBSN 3G and CRC dev 14.1 beta... as I said, The hebrew installs fine but once the device goes to standby/power saving it just dies...
I've tried doing what the post you've ref'd me to offered - disabling the advance network features on the pc-usb connection and removing some addons like the Voice-Commander... no luck either... been at it all night
is it possible that HebCert.cab or 180407_HebrewTyTN.cab you've attached are not of the right version?
The Hebrew is WAAAAAAY better than Paragon's LENG (as long as the device stays on) that doesn't even let me use Opera past ver8.6, and I'd really hate to give it up.
Please advise..

the version of the hebrew is from my phone but is identical to the hebrew cabs from other orange tytn phones.
+iv'e dumped my ext.rom like a year ago then my phone broke (physicly) just last week and
the new tytn orange gave me had the same exact cabs for hebrew
(with almost the same rom newer version but wm5 uglyass green lame-o)
so that's not it for sure..
++it happened to me as well with several roms with the same hebrew cabs
for no apparent reason but now it works just fine.
+++u can always go back (assuming u backedup)to the original orange rom
that came with your tytn and dump the hebrew cabs from your ext.rom though it will be a waste of time.
one thing i did that help with the PDAcorner's older version with this problem was to update the HARD-SPL version to 2.3
..so check your spl version by reseting to the bootloader
(reset while holding the power button and the top left ok button)
if its lower than 1.40 theres a big chance an update would do the job..
http://www.mrvanx.org/thg/
update to 2.1 or to the latest then reflash i suggest to http://forum.xda-developers.com/showthread.php?t=439973
cause we know it works for sure.
+don't install nothing not even the hebrew..check if the device wakes then install ONLY the hebcert(btw:u install this first always) and main file but change the interface language before reset so it wont boot with hebrew menus even once..post back if the problem presists.. good luck

I Refuse to give up!!
Well, I did everything you offered, bit by bit -
1. Updated to HardSPL 2.1
2. Flashed to HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2008
3. Did an ON and OFF tests, few times - after power off, soft reset eg.. (ps I found out that Soft Reset from the os doesn't work either after the hebrew installation - so I checked that too) - all worked fine.
4. I've installed the HebCert.cab and then the main file.
5. changed the interface language to english.
6. Reset and voila... same bug all over again
I thought maybe it had something to do with installing the hebrew while the tytn is connected to activesync so i did all that without it being so.
got any more ideas?
# _

listen this time youll get it stright,..
i think its all cause you got the WRONG rom..
i saw you wrote "HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2 008" rom while i was talking about:
27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang
http://rapidshare.com/files/157947939/HERMES_WWE_3.62.502.20_B20921_Manila2D.rar as the lighter rom installed
anyways i felt kinda guilty cause i recommended it (though i told you i havent tested it but i guess you didnt understand to which one i was refferin)
so i flashed the rom you were talking about just to check
and suprise suprise my tytn didnt wake same as yours..
reflashed back to 27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang(http://forum.xda-developers.com/showthread.php?t=439973)
and TA-DA works like a charm..
so i would suggest to repeat the same stages as from your last message only this time with the right one
good luck buddy im sure this time itll work
btw the password for the file ishamQuang

If I haven't said it so far - thank you ever so much for your time and effort.
Well, I did write the name of that rom but I've tried both roms on the same process...
I did, however, manage to get some progress on another angle - I've updated my radio version (was the only thing we didn't cover) and now it works with the Manila2D rom. alas, nothing else seems to be working...
I've started to install all my favorite progies (Adobe Reader LE, PocketRAR, SPB Insight, JBED, Opera Mobile, Opera Mini, etc...) and everytime the darn phone hangs on one of the installation and just DIES... only hard reset can revive it...
I'm gonna start from scratch - tomorrow I'm gonna take a naked rom and start building on top of it... I must be doing something wrong. only good indication is that the phone can get in and out of standby WITH the your hebrew version - so I know the hebrew is ok.
I'll go thru with it tomorrow and keep you posted.
again, I really appreciate your efforts to help. thanks.

your very welcome.. to be honest its just cause were both israellis and also because i went through this crap myself but no one here could really help me i had to solve it myself..
i DID forget to tell you the first thing i did to the phone was to SUPERCID unlock it:
http://pof.eslack.org/hermes-unlocker/http://pof.eslack.org/hermes-unlocker/
try it if you havent already, mayb the protection is whats causin all the freezes. plus its unlocks the sim bull****.
GL again
BTW:
you dont need to install opera for manilla2d:
http://forum.xda-developers.com/showpost.php?p=2860699&postcount=4764
or use the file ive attached.
plus its better lookin htc version.
and use this as the PDF reader 100x faster than adobe:

http://forum.xda-developers.com/showthread.php?t=425268
http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2

Great (Partial) Success!!
Ok! here's what I did and some conclusions I've come to:
1. flashed CRC r14.1 Big Storage ROM.
2. Installed ALLLLLLLLLLLL of the app's I needed prior to the hebrew installation.
3. Cleared all Caches, Temps, and MRU lists etc using SKtools.
4. Clean Start the device (SR).
5. Installed the hebrew, changed interface language and Soft reset.
6. Enjoyed my new revived device!!
now the only thing that DOES go wrong is the Java emulation, I've tried all available versions of Esmertec Jave (20080222 3.1M, 20080328.31 and 20080428.2.1) Tried installing to the device and to the SD and didn't succeed. I also tried to use the Device Update feature of CRC to get the latest java version from thier repository... didn't succeed either.
The thing is, before the hebrew was installed all versions worked fine, and after that NONE did...
I also think that this piece of software is what causing the device to die!!
After I remove the java emulator the device just hangs on the boot screen.
I've flashed my device numerous times with a whole bounch of ROMs, The conclusion I came to is that the hebrew worked on MOST of the ROMS didn't have JBED pre-installaed!
I would have checked it but I'm tired from flashing and installing stuff on my device for now, maybe next month... I gave up on using OperaMini since I don't have a working java emulator currently.
Which, if any, are u using?
Thanks for all the pieces of software you've recommended, I tried the PDF reader you suggested and I like Acrobat LE 2.5 Diamond edition better.,,
Anyhow - It's working now. so as my project instructor said - if it works - don't touch it!
Thanks alot for now! I WILL try to isolate the problem and keep you posted!
I Owe you man..

http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67
http://www-jpc.physics.ox.ac.uk/ge
tjpc.html
i use it only when i get bored and start messin with stuff..
glad to hear u finnaly naild it
feel free to ask or recommend stuff to me espcially hebrew ot israel stuff
c u on the flipside
btw: i just found out something cool when you hold the green talk button from 2 sec it turns on/ff the speakerphone

http://forum.xda-developers.com/showthread.php?p=2970594#post2970594

badnimits said:
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
Click to expand...
Click to collapse
Shalom,
Do you know if it works on an HTC Dual Touch with Windows Mobile 6.1 US ?

The HTC Dialer above is 2G version?
Are there any 3G version for WM 6.1?
Thanks