Develop Bugs

Help me Please Wrong HSPL???

Hello my friends I just bought my new toy diamond......and i think I did a Bull****. I have the 1.37.414.3 wwe rom with radio 1.0025.03 and protocol version 52.26a.25.09H .....after I was doing the hspl and now i have 1.30 Ollinex........the problem that i have is that after that i wanted to put the new wwe europe withe 1.93 rom and the radio ....05 but it was stucking in the 0% ok i was reading the forum and i saw others to have that but i didnt found a solution.... but after that i was trying the developers spl but it doesnt find my device after the last step of the update i get error 202 it doesnt found the device. I was trying the others spl 1.24..1.37... nothing the same ****... it was disconecting my device from activesync and nothing...Please Please i am a big fun of htc I have 2 qtek9000 2 htc shift 1 athena t 1 htc tytn and now the diamond. What i mean is that i knew UNTIL NOW to flash roms and spl but now.......Tell me what should i do now i would like to flash the wwe normal new 1.93 rom with ...05 radio can u give me links and what shoul i do?????? Please guys,,,,,

have you tried 1.93 HSPL?

help
Windoze9t8 said:
have you tried 1.93 HSPL?
Click to expand...
Click to collapse
do you know how i will overcome the disconected device error andv do you mean that after that i can put the WWE EUROPE ROM???? please tell me

Thank u Windoze9t8
Thank you very much for ur help i did upgrade to hspl developers 1.40 olinex and now with ur help i will try to flash my roms and make radio update to ..05....thank you again my friend for your precious help.

You're very welcome - hopeyou get the rest sorted...

dimisxxx said:
Hello my friends I just bought my new toy diamond......and i think I did a Bull****. I have the 1.37.414.3 wwe rom with radio 1.0025.03 and protocol version 52.26a.25.09H .....after I was doing the hspl and now i have 1.30 Ollinex........the problem that i have is that after that i wanted to put the new wwe europe withe 1.93 rom and the radio ....05 but it was stucking in the 0% ok i was reading the forum and i saw others to have that but i didnt found a solution.... but after that i was trying the developers spl but it doesnt find my device after the last step of the update i get error 202 it doesnt found the device. I was trying the others spl 1.24..1.37... nothing the same ****... it was disconecting my device from activesync and nothing...Please Please i am a big fun of htc I have 2 qtek9000 2 htc shift 1 athena t 1 htc tytn and now the diamond. What i mean is that i knew UNTIL NOW to flash roms and spl but now.......Tell me what should i do now i would like to flash the wwe normal new 1.93 rom with ...05 radio can u give me links and what shoul i do?????? Please guys,,,,,
Click to expand...
Click to collapse
Use this little Pack is helped me when SSPL-Manual did nothing ,so will 4 uu is well...

When need to usi hard spl ?

Anybody can give me helpfull information ?
When i can use Hard Spl on Diamond ?

http://forum.xda-developers.com/showthread.php?t=416211

akter_hosain said:
Anybody can give me helpfull information ?
When i can use Hard Spl on Diamond ?
Click to expand...
Click to collapse
You must use Hard-SPL if you want to change you rom, cooked or Stock(Your area rom dont need hard-spl) and if you want to change radio rom. If you dont upgrade to Hard-spl you are stuck with the rom in your device..The only time you can upgrade or change rom is when a new HTC rom for Diamond is released, for your AREA. and you can download it from the HTC.com support site
If you are thinking of flash the Hard-Spl read the link Blazeitup123 put up

where can i download the original SPL?

Hi at all,
I had used Hard-SPL to unlock my Diamond. But how can I change it back to the original SPL as i need to repair my cell phone?
where can i download the origianl SPL for the HONG KONG version HTC Diamond?
thk a lot

Here you go:
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20

the original version of SPL is 2.0??
but that is not included in the post?
supersanj said:
Here you go:
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
Click to expand...
Click to collapse

Need to load back SPL-2.03

Ok all expert here i want to ask a question. I want to send my diamond for a repair that still in warranty. before this i've load olinex unsigned 1.93 spl. but when i reflash to original official 2.03 rom the spl is still the same and not the 2.03 version one. I've done using the nbhutil to extract the spl module from official rom and make it an nbh format. but when i flash the spl only it still the 1.93 version. how is this happened?
**do u really think that they will check for the spl version before repair instead of official rom loaded? i'm afraid just because of the spl version is not the official one will void the warranty.
please help me. sorry for poor english.

Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699

mrm2007 said:
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
I already flashed to the stock 2.03 rom but when i check the bootloader version its still spl-1.40 olipro. before this its spl-2.03. so how?

Your SPL is Hard-SPL, meaning: write protected. You can only overwrite it using Soft-SPL (= SSPL). Search and you'll find it.

I had to return my handset and returned to different official ROM and SPL than supplied by the operator. So I would suggest to use 1.93 for both check this post/thread. Once you have your phone back to 1.93 for both SPL and ROM - Load your 2.03 ROM which should update the SPL too.
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
Check the top of the same thread too HERE

if you search ( ReStore Hard SPL ) you can see my post about your problem

Hello, and everbody hello,
please tell me, is it possible people from company where i buyed HTC diamond
Diam100 64m
microp-diam (led) v11
psoc-diam stage_pvt v0x32
to discover, am i changed STOCK SPL to HSPL unsigned, when i back to STOCK SPL uploaded in post #20 , i'm not sure which one from that post to use ?
1.34, 1.38 , 1,93 or ?
I'm not sure what was originally - stock SPL which came with my phone , i sent mail to HTC support to ask him, do they know to tell me over S/N what was first originally SPL on my phone, but they tell me all information what they have, but not 1st version of SPL.
Information are like this
SN :HTxxxxxxxxxxx IMEI :xxxxxxxxxxxxx Part Number :xxxxxx-00 Part Description :SKU,HTC,Swedish,SWE,UMTS 900/2100,Cut,Black,Diamond-XX,w/oSIM LockSIM Lock Customer Name :xxxxxxx : HTC Model DIAMOND-XX
this phone is buyed in Sweden, and my problem is, i don't know what version of STOCK spl from post #20 to use for warranty, cause i have to send my phone in service for repairing, but what Stock SPL to use, for no discovering from people which work in repairing service?
I remember version of stock rom was 1.93 Swedish, one before latest, but for SPL i'm not sure, maybe 1.34 or 1.35, i scarried they will discover me, i used HSPL, and i don't know what stock SPL to put on my HTC for warrant and no discovering about using another SPL-s like HSPL , unsigned,signed etc..?
Tnx in advance everbody for help!
God bless you
Greetings
p.s.
Phone is buyed - unlocked, not signed for some mobile operator or similiar! It came just with stock ROM - 1.93 swedish, and maybe 1.35 spl or maybe 1.93, it's buyed before 1-2 month, maybe that will help me to discover which was stock SPL, and which one i have to use for warranty?

please somebody help, cause this is urgent for me, i have to send phone in service today
tnx in advance,
greetz

Can i put SPL 1.93 Olinex on a HTC Diamond US Version?????

Have someone tested the 1.93 Olinex SPL in a Htc Diamond US version? The one that DOES NOT have the videocall camera in the frontside?
Is this SPL better than the 1.40 olinex? Why?

I have same question.

Do not do that
Please, Please Please, you could brick your device if not a GSM Version.
EDIT add link for CDMA HSPL
http://forum.ppcgeeks.com/showthread.php?t=35839

Thanks bro, my cellphone is a GSM Unlock HTC Diamond US version, don't have 2 cams, I have Olinex 1.40 but I want put 1.93, my question is compatible.

I have a HTC Diamond Touch from Rogers, so I Think we have same type of radio.
I'm already in 1.93Oli

Hspl 1.93-1.40
AlexisRoj said:
Thanks bro, my cellphone is a GSM Unlock HTC Diamond US version, don't have 2 cams, I have Olinex 1.40 but I want put 1.93, my question is compatible.
Click to expand...
Click to collapse
I have the same phone as you have in GSM. It was with 1.93 SPL and I Changed to Olinex 1.40.
If I could do that, I think you should have no problem in moving to 1.93 un-signed.
Thanks

pranavsethi said:
I have the same phone as you have in GSM. It was with 1.93 SPL and I Changed to Olinex 1.40.
If I could do that, I think you should have no problem in moving to 1.93 un-signed.
Thanks
Click to expand...
Click to collapse
For you is better this SPL or is the same.

AlexisRoj said:
Thanks bro, my cellphone is a GSM Unlock HTC Diamond US version, don't have 2 cams, I have Olinex 1.40 but I want put 1.93, my question is compatible.
Click to expand...
Click to collapse
The is really no need to change from 1.4 to 1.93 unless you are having issues like screen flickering ETC but if you must have it get 1.93 here

R3PUBL1K said:
The is really no need to change from 1.4 to 1.93 unless you are having issues like screen flickering ETC but if you must have it get 1.93 here
Click to expand...
Click to collapse
Thanks bro, for me this is sufficient

1.40 is working fine for me, but i just wanted to see what could i win if i upgraded it...

donchele said:
1.40 is working fine for me, but i just wanted to see what could i win if i upgraded it...
Click to expand...
Click to collapse
I had the same question and tested both (GSM regular diamond)...
For me at least, nothing changed.