Related
Hi all - sorry about the guest post, i'm not yet registered but having problems with my email so i'll register properly asap!
Been trying to decide what Blue Angel device to get, so far it's down to the MDA3 or M2k as i really object to o2's obnoxious customer service attitude. however before i get one, can someone answer me some questions?
1) The WiFi - i have a wifi network at home, can the phone browse files and folders on these machines as easily as "network places" on the PC desktop? EG if i have media player running on the phone, can i stream mp3s over the wifi by going into my pc's hdd and choosing the files i want? Then i can hook my phone into the hifi system downstairs and play mp3s through that.
2) What's the battery life like for, say, 1-2 hours talking a day plus a fair bit of fiddling - non-radio stuff like playing games and 'tweaking'.
3) Does the MMC slot support SDIO for a plug-in GPS reciever, or do i need to look at a Bluetooth or wired one (like the TomTom)
4) Is it a walled garden system or can i install any software and go to any websites?
5) Will it charge through the USB Connector or does the ac adaptor need to be plugged into it too? My original SPV wouldn't but my gf's E500 will charge from USB alone.
Thanks a lot....
1) It doesn't support this out of the box, but I believe there is software available. Not really my "thing" though.
2) I get a couple of days from normal useage. For example, it came off the charger at 5pm on Friday and went back on again at 8am this (Monday) morning with about 15% left. A few phone calls, checking e-mail and bit of surfing over wi-fi, bluetooth on most of the time both for headset and testing out my new TomTom GPS, lots of PIM useage.
3) It does support SDIO, but I don't know of an SDIO GPS receiver and, even if there were, it would take up your only memory slot so the maps would have to go into internal memory. I've opted for the TomTom bluetooth and it seems to work fine.
4) Totally open.
5) It trickle charges through the USB. I leave mine in the cradle at work and it takes about 4-5 hours for a full charge.
Anonymous said:
Hi all - sorry about the guest post, i'm not yet registered but having problems with my email so i'll register properly asap!
Been trying to decide what Blue Angel device to get, so far it's down to the MDA3 or M2k as i really object to o2's obnoxious customer service attitude. however before i get one, can someone answer me some questions?
1) The WiFi - i have a wifi network at home, can the phone browse files and folders on these machines as easily as "network places" on the PC desktop? EG if i have media player running on the phone, can i stream mp3s over the wifi by going into my pc's hdd and choosing the files i want? Then i can hook my phone into the hifi system downstairs and play mp3s through that.
2) What's the battery life like for, say, 1-2 hours talking a day plus a fair bit of fiddling - non-radio stuff like playing games and 'tweaking'.
3) Does the MMC slot support SDIO for a plug-in GPS reciever, or do i need to look at a Bluetooth or wired one (like the TomTom)
4) Is it a walled garden system or can i install any software and go to any websites?
5) Will it charge through the USB Connector or does the ac adaptor need to be plugged into it too? My original SPV wouldn't but my gf's E500 will charge from USB alone.
Thanks a lot....
Click to expand...
Click to collapse
Hello,
1) Browsing files on another device is something I haven't done but I'm sure there are ways of doing it. Not sure if the Windows Media Player (V9) can cope with that kind of file streaming. As the headphone socket is not a standard one you probably wont be able to hook it up to the hi-fi straight out of the box. Check the forums for posts on this.
2) Battery life is good on these. The WiFi is the battery eater. I do a fair few phone calls, some tweaking and WiFi and from 8am to 11pm I'm on about 70-60% battery life!
3) As far as I know, the card slot on top is SD only (i will soon be corrected if I'm wrong) but I do know that it is SDIO so cards with extra features should be compatible.
4) You CAN'T install any software you like. You can only install PocketPC applications. There may be some differences between version of PocketPC (eg, 2002 - 2003) but most of them work ok. With regards to the website, about 80% of the ones I go to are ok. The ones that need Java or Macromedia can be a problem.
5) The BlueAngel's can all charge from the USB Cradle alone. I keep my AC Adapter at me Fiancee's for when I stay over there :wink:
Hope this helps!
Dom
Thanks for the replies guys... just to clarify, i didn't mean ANY software, i meant pocket PC stuff - i'm used to my original SPV that would only allow Orange-approved software for quite a while until they allowed you to unlock the software side of it via the website, and again my Symbian A920 on Three did the same thing before i hacked some binaries!
I had a play with my friends M2k, we got it to read a mp3 from a wireless PC but you had to specify it in media player, although we could browse the folders on the PC by entering the location (eg \\HOMEPC\SharedFolder) in File Manager on the M2k, there seemed to be no way of opening the MP3 directly.... however going to media player and using the Play Location (URL) and entering \\HOMEPC\SharedFolder\Track1.mp3 worked fine, the music played on the handset. However it's a bit of a ballache to enter every track name! I assume this may be fixed in Media Player 10....
Thanks for the help on the other stuff... you completely disagreed with several phone shops on the charging this, but you were entirely right!
hi
I spent allot of time searching the net for a wireless camera (for security purposes) that has the ability to transfer live video to my Qtek2020i which is wireless enabled.
I am not looking for an IP cam, I dont want to view the video by connecting to GPRS, I want my pocket pc to find the camera as a wireless access point and using some software I want to see the video from that camera, is there anything like that?
all of the wireless cameras I found has a reciever device to connect to TV or VCR and this is not what I want, and the others has the capability to send the video to internet and by accessing the site from the PDA you can see the video, this is also unwanted for me.
so please tell me if there is such a cam and how to buy it and how much, I really need such a product for controlling my office while I am moving in the building, my job includes moving allot to different offices, so I need to check if anyone mess around in my office during my absence directly. i dont want to record then watch, I need something live !
thanks
Imagine using Wi-Fi for direct connection between your laptop/PPC (and other end devices) to an external hard disk. Imposssible?
Just read this:-
http://www.edslab.com/products.htm
The product will be launched this coming July 06. Initially, it'll connect to your laptop/notebook. After which driver will be developed for PPC application.
No more expensive memory cards :lol:
You can also look at Asus WL-HDD - althogh this one have some advantages, like the battery and 1.8" size.
I just hope it will be released and that the price will not be too much.
RE
If I remembers correctly ASUS WL-HDD requires connection through an access point/router whereas the main selling point of Wi-Drive is its direct connection between end devices WITHOUT the need to go through the access point/router. However, you can also network the drive through an access point/router :lol:
I'm using Wl-Hdd since it's release to get my files from my pda. It's working like a charm. It is an access point and router, and you can make it a full linux server easily
Hi,
Just a question and a thought...
With the WL-HDD, is it stand-alone? i.e. does it have an internal power source - or must be connected via a power adaptor?
And can it connect directly to the HTC Universal (without need of a switch or router?).
My thought is, I wonder if anyone has tried to connect an IPOD to a PPC device? wouldn't that be an ideal external HDD device?
Michael G
michaelg said:
With the WL-HDD, is it stand-alone? i.e. does it have an internal power source - or must be connected via a power adaptor?
...
Click to expand...
Click to collapse
The WL-HDD does not have built in battery, you need power adaptor unfortunately.
michaelg said:
...
And can it connect directly to the HTC Universal (without need of a switch or router?).
...
Click to expand...
Click to collapse
I haven't tried yet (still deciding if I should buy it or not), but since it's an Access Point it should connect no problem.
michaelg said:
...
My thought is, I wonder if anyone has tried to connect an IPOD to a PPC device? wouldn't that be an ideal external HDD device?
Click to expand...
Click to collapse
IPOD is not Wireless, you can use it only as an USB memory device.
People had connected their IPODS to USB Host enabled PPCs like FS Loox and it worked fine. Unfortunately there are no HTC converged devices with USB Host functionality at the moment.
Wl-hdd work perfectly as a stand alone product with any PPC. I'm using it for 1,5 years now and it is perfectly working on my universal. No physical connection needed except power source.
As for the Ipod, if you change the wl-hdd firmware, you can connect any USB device in the USB port to get access to it's files. So you cannot plug the ipod to the universal, but you can plug the ipod to the wl-hdd then access it through universal
RE
Some pictures of Wi-Drive here:-
http://www.engadget.com/2006/03/13/live-from-cebit-the-widrive-wifi-drive-enclosure/
The enclosure comes with a female connector for the hard disk which means hard disk like the 1.8 inch Toshiba (which comes with a female connector) cannot be used
That leaves us with the 1.8 inch Hitachi brand which comes with a male connector. Not much choice for the 1.8 inch hard disk since currently only 1.8 inch hard disks are only available from Toshiba and Hitachi
RE
Just spoke to the manufacturer of Wi-Drive today
They will release the drive this coming July. I think I can get one from them before it goes to the market
Capacity : Casing comes with 30 and 60 GB 5400 rpm hard disk (for 1.8 inch)
Best of all!! Can connect direct with PPC besides notebook/laptop. They've an engineering test unit. Just waiting for production now.
Here's the explanation using WiFi. The drive will be recognised as a web folder instead of a drive by the PPC. This web folder will consists of your folders and files and you'll have to use IE browser to access them. Power input is 5V DC using mini USB which means you can charge it from your notebook/laptop USB ports or any external battery pack whihc provides a 5V DC output.
WOW!! Can't wait to lay my hand on one of these
at least there responding to someone...
they dont respond at all to any mails from me :?
i dont know if i like the web folder thingy though...
would prefer if it just showed trough the file explorer, does resco explorer show web folders?
did they tell you the prices with the 30 and 60gb and without any HD?
at least there responding to someone...
they dont respond at all to any mails from me :?
i dont know if i like the web folder thingy though...
would prefer if it just showed trough the file explorer, does resco explorer show web folders?
did they tell you the prices with the 30 and 60gb and without any HD?
RE
Quote
"did they tell you the prices with the 30 and 60gb and without any HD?"
Nope. No pricing figure for the moment. They don't sell to end users because they're the manufacturer. The actual pricing will depend on the retail shops
Quote
"would prefer if it just showed trough the file explorer, does resco explorer show web folders? "
No idea
I guess we just have to sit back and wait patiently
RE
OK, tested the WiDrive on my Universal today
Looks pretty cool...comes with Hitachi 1.8" 30GB hard disk
Managed to get it connected with my Universal using WiFi and access WiDrive using internet by typing a certain address on the address bar. The drive is treated as a web folder
Once login to WiDrive I'm able to download files to play (or save it) on my Universal
Also, can use my external 8800mAH battery pack (purchased from EastGear) to charge the WiDrive
Some issues though
a) cannot upload file from my SD card to WiDrive...hmmm
b) after playing a song I'll need to re-type the address at the PIE address bar in order to return to WiDrive
c) I think music and video cannot be streamed while playing on the Universal. What I mean is I'll need to download the music/video file to my Universal and the concerned program will be auto activated to play the music/video file.....have to check this further otherwise the drive just acts like another drive
Did not buy yet so no testing on notebook carried out. According to the shop streaming was done using the notebook as a driver is required to be installed on the notebook.
Well, I've discussed with WiDrive's boss on the above issues. Will discuss with their engineer tomorrow and feedback here.
Wow, its an experience. Cost about US$263
:lol:
RE
Sorry for the late reply
There're some changes. I'll be getting a 1.8 inch 60GB IDE Hitachi Travelstar and the Wi-Drive casing separately (cheaper this way) by this weekend. If everything works out fine I'll be reporting back
BTW, I was told by the engineer of EDSLAB that OPERA works better than PIE on their drive
RE
Sorry, due falls apart. For the 1.8" hard disk Wi-Drive comes with standard 30GB
60GB version will be released later
Some pictures of Wi-Drive here:-
http://sg.vr-zone.com/index.php?i=3827
:lol:
Hmm... Widrive looks good, but WL-HDD is still better in my mind. It can run off a battery (all PSP emergency batterys work, imagine my joy at finding that out!) ,it has an ethernet port for intergration to home networks (you can use it as a wireless access point) and it has USB host, so you can share USB drives, webcams, everything. It also comes up to 100gb, and i bet you itll be cheaper. you could even swap in a 1.8" hdd into the housing and put the battery in the space left, making it a neat solution.
RE
I've bought the Wi-Drive but only for 30GB model and still testing it
Initial test with OPERA gives pretty good results :lol:
Where can either of these external drives be purchased?
berdinkerdickle said:
Where can either of these external drives be purchased?
Click to expand...
Click to collapse
lol... i wouldnt buy one of those. Max = 100mbps on wireless. On wired USB 2.0 or Firewire = 480mbps or 800mbps i think. I use my diamondmax 11 or my cheetah scsi 15k rpm drive and it goes really quick. I put it on wifi by hooking it up to another computer and mapping it or just use remote access. Anything is possible nowadays, i dont have to tell it to you. But it seems this hard drive can exist independently when signal is available. I dont know how that works but i am sure you need a lcd display to select a network or to enter the key. Just like microsoft Zune? Why dont you guys go for microsoft Zune now that i think of it. ^^
nuclear said:
lol... i wouldnt buy one of those. Max = 100mbps on wireless. On wired USB 2.0 or Firewire = 480mbps or 800mbps i think. I use my diamondmax 11 or my cheetah scsi 15k rpm drive and it goes really quick. I put it on wifi by hooking it up to another computer and mapping it or just use remote access. Anything is possible nowadays, i dont have to tell it to you. But it seems this hard drive can exist independently when signal is available. I dont know how that works but i am sure you need a lcd display to select a network or to enter the key. Just like microsoft Zune? Why dont you guys go for microsoft Zune now that i think of it. ^^
Click to expand...
Click to collapse
The point of these drives is mass storage on the universal. Read the thread before posting.
First of all thank you guys for such a great apps environment you created for our lazy WM platform.
Second of all I hope I am posting my request in the right place. Could someone start developing an application similar in functions with AirVideo for iphone. Its a basic app with a server(PC) - client(device) side that allows you to play on the phone any video stored on the PC (and any other storage media connected to the PC) without having to actually transfer the video on the device itself.
For more info please check : http://www.inmethod.com/air-video/index.html
It would be amazing if someone could achieve this. I would gladlly pay for such an app as I oftenly like to review my video courses I have stored on my PC from the convenience of my phone.
PS: I gave up the iphone platform 6 months ago and I am so much happier with my HD2.
juicecultus said:
First of all thank you guys for such a great apps environment you created for our lazy WM platform.
Second of all I hope I am posting my request in the right place. Could someone start developing an application similar in functions with AirVideo for iphone. Its a basic app with a server(PC) - client(device) side that allows you to play on the phone any video stored on the PC (and any other storage media connected to the PC) without having to actually transfer the video on the device itself.
For more info please check : http://www.inmethod.com/air-video/index.html
It would be amazing if someone could achieve this. I would gladlly pay for such an app as I oftenly like to review my video courses I have stored on my PC from the convenience of my phone.
PS: I gave up the iphone platform 6 months ago and I am so much happier with my HD2.
Click to expand...
Click to collapse
Try orb. i use it on my HD2 and it works great. There's no need for a client app either! Just a browser (built in IE will do).
10x for the suggestion, I wasn't aware of this software.
Does it provide access to my content through my wireless router (under a local connection - PC and phone using the same WIFI) or do I have to stream everything through my broadband and their online servers?
All you need for airvideo is that the phone and the pc are connected to the same WIFI. All the streaming is done using the local connection which is good for privacy and there is also the option to convert a video file on the fly.
This sort of functionality I would like on the windows mobile platform if a developer would like to give it a go.
juicecultus said:
10x for the suggestion, I wasn't aware of this software.
Does it provide access to my content through my wireless router (under a local connection - PC and phone using the same WIFI) or do I have to stream everything through my broadband and their online servers?
All you need for airvideo is that the phone and the pc are connected to the same WIFI. All the streaming is done using the local connection which is good for privacy and there is also the option to convert a video file on the fly.
This sort of functionality I would like on the windows mobile platform if a developer would like to give it a go.
Click to expand...
Click to collapse
Orb basically turns your PC into a media server. You just use whatever means you want to connect to your PC. I have a use one of those services that gives your PC a name, and I just connect to it via that, so I can do it via my internet connection if I want to, or connect via wifi and use the local IP address (192.168.x.x) to connect that way, but I don't tend to do that much, as I'm obviously in range of my PC if I'm in range of the router
Orb gives you access to specified folders on your PC, and all the media within them. It does images, video and music, so it really is a great addition to any device.
UPDATED WITH REVIEW:
In-depth review below, will update in a few days to cover DLNA support and revisit Miracast experience while at home (currently discussing the experience at a university)
The PTV Miracast adapter works as advertised, but isn’t perfect. Miracast functionality works like a charm, but with the same slight delay in most other adapters out there. AirPlay is listed as a feature, but don’t expect it to work. Upon opening the package, I was greeted with a matte black, rubbery dongle that was slightly larger than a USB thumb-drive. Under the cap is the HDMI plug, on the other end are two micro USB ports -- one for power and one to connect a storage drive. On one side of the USB end is a tiny button that doesn’t clearly indicate it’s purpose, but is meant to switch between Miracast connectivity and AirFun mode (see below).
Using this adapter isn’t as intuitive as I would like it to be, but it does work. When you initially plug the device into the HDMI port of the TV and USB power, you’re greeted with the AirFun screen, which is green and black. This screen displays the dongle’s IP address, a url containing the IP address and ending with “/remote,” and what network it’s connecting to. When no network is available, it turns itself into it’s own wireless network to allow you to connect. Visiting http://ipaddress/remote takes you to a web-based remote for the dongle to set it up and control the DLNA features of the device. When connecting to this address from an Android device, it prompts you to download the app for this same control. The app is called AirFun and CORRECTION: is in the Play Store - https://play.google.com/store/apps/details?id=com.realtek.airfun.client. The app appears to be stored on the dongle itself also. Don't worry much about this app after you've adjusted the settings to your liking. Use another DLNA app for your media, MirrorOP if you wish to take advantage of that, and wait on AirPlay.
Connecting the dongle to wifi is easy, but the first step isn’t apparent. You must first connect your phone or tablet to the wifi hotspot the dongle creates. At this time, you will not have an internet connection and will only be able to connect to the Miracast dongle. The next step is to go to the url containing the ip address that is displayed on your TV or use the app to connect to the device. In the settings, you can choose the wireless network you want to use and enter the password. Once this is completed, the Miracast adapter will disconnect it’s own hotspot, disconnect your phone or tablet from the device, and connect to the wireless network you chose. At this point, you should connect to the same wireless network in order to pair with the device again.
I must share a mistake I had made in hopes of those reading this can learn from it. Do not, under any circumstances, connect to an open wireless network in which you need to visit a web browser to sign in or click and accept button. The Miracast adapter can’t choose to accept a license or enter login information. I did this at the university I work for and found that I could no longer access the dongle for anything relying on wifi, including accessing the settings. I had attempted to disconnect and reconnect, reset, unplug and plug in again the device. As I had already set it to connect to the wifi that requires authentication in a browser, it automatically connected to it every time. I was forced to bring this in a location in which that wireless network was unaccessible so that I could connect directly to the device’s own hotspot and connect it to another network.
Once the wireless connection has been connected to both the PTV dongle and your phone or tablet, you can begin using MirrorOP, DLNA, or AirPlay. Please note that Miracast is connected using different steps which I will discuss later. No wireless connection is needed for Miracast and if this is the sole purpose of using this device, you can ignore the steps above and continue to the section specifically about Miracast. After connecting to wifi, I tested MirrorOP and found that connecting to this worked without issue. The screen mirrored as any other MirrorOP connection does. MirrorOP is an AirPlay-like connection except that it requires a rooted Android device or jailbroken iOS device to connect. It mirrors the screen like AirPlay to a device on the same wireless network. The MirrorOP app needs to be installed on your device to make the connection. Though screen mirroring works, MirrorOP does not support audio mirroring -- the audio will continue to play through your phone or tablet.
Connecting to AirPlay was very disappointing. I attempted to connect to AirPlay both at the university I work at and at home using an iPad on iOS7. In each attempt to connect, the iPad recognized the Miracast dongle as an AirPlay device. When selecting to connect to it, it appeared to work initially. Choosing a photo to display on the AirPlay device, however, proved nothing worked. The photo would not project to the TV. The same applied for video as well, but I have not yet tested audio. When enabling screen mirroring in the AirPlay settings, I was also disappointed by the results. The notification bar turned blue, the device appeared to be trying to connect for mirroring, then the AirPlay settings reset, turning off the connection to the dongle. No matter how many times I tried, it wouldn’t work. It may be my lack of knowledge with iOS and how to properly connect the devices, it could be an incompatibility with iOS7, or it could just be a falsely advertised feature. I don’t know the answer to this. EDITED: If I am correct in that Visiontech makes this device, their website (in a couple of posts below) indicates AirPlay is a feature still in development and will be added in a future update.
EDITED: DLNA works as expected. I did have some buffering/stuttering, but that was likely due to my new ISP which is a reduction in speed. Any DLNA/UPNP app or device will recognize this dongle and send content to it. Since DLNA plays the content locally, I haven't narrowed down which files are supported. I have not had any issue with mp4, which should be expected. In order to use DLNA, this dongle needs to be in AirFun mode, but you don't need to use the AirFun app to use it. This app just gives basic functionality and allows you to setup the dongle.
The most important feature in which I purchased this for is the Miracast functionality. I tested this in two different environments and found two different user experiences. I tested this at the university I work for and at home (which I am still testing more at home and will update this with more information later). Before you can connect to Miracast, you must press the button on the side of the dongle twice to switch to the wireless HDMI mode. At the university, the experience was such that I don’t feel it would be beneficial for the classroom. Connecting took several attempts before it was successful. Upon a successful connection, most of the time my device’s wireless connection was disconnected and reverted to cellular data. The screen mirroring worked as it should, however with a fraction of a second in latency. Audio transmitted to the TV flawlessly as well. At times, especially during heavy activity, the TV would fall further behind than initial connection and the picture would display large groups of poorly rendered blocks. This was further exaggerated when I reconnected to wifi for some reason. It may be due to the large number of wireless devices on a college campus causing interference that caused these issues, but I don’t know enough about networking to make an educated guess to this. I did notice turning the HTC One’s Power Saver mode off improved the experience, but only slightly.
EDITED: At home, I get mixed results. Most of the time, it works flawlessly via Miracast. There are times that the picture lags behind and when it starts to, it can be tens of seconds behind. It eventually catches up, especially if you stop your activity to allow it to catch up. With that said, I streamed a few movies from Plex to my HTC One which was Miracasting to the PTV dongle. I did not see any moments in any attempt in which the mirroring had fallen out of sync with my phone. I did, however, find a few movies that would not play sound over Miracast. I am not sure if this is due to bandwidth, licensing/authentication/DRM, or something else entirely. I need to investigate the files more in depth to determine if it's the stream. I tried to play a game with this, but I honestly found myself looking at my phone more than the TV to see where I was touching on screen. I didn't notice any delay here either, but I wasn't playing a complex game either. I ought to try this using a game controller and see how it performs this way. I also discovered that Google Play Music and Google Play Movies & TV are blocked over Miracast. They will not play, even locally stored music tracks. Play Movies tells me this feature is not supported, while Play Music will either display "Cannot play track" or disconnect the Miracast connection completely. Upon contacting Google with regard to this, they responded indicating that this is normal behavior and suggested I buy a Chromecast. I shouldn't have to buy another product to use Google services that already work on my device.
Being a Sprint customer and experiencing network issues regularly on their cellular data, I have installed an app that floats network download and upload speeds on my screen so that I can determine if anything isn’t working due to my internet connection. I noticed that while connected through Miracast, my upload speeds were incredibly high. This is what I would expect from a Miracast connection considering 1080p video encoded as h.264 mp4 video and up to 5.1 surround sound audio is being sent from my phone to the dongle over wifi direct. For anyone curious about the network activity, my upload speeds floated between 7-9 Mbps while connected to Miracast. Download speeds remained normal for the activity I was performing.
I also wanted to note that the PTV Miracast adapter gets about as hot as the HTC One can during high activity. It can be uncomfortable to touch. The included manual warns about this and promises that it will not affect performance. I am still concerned of the heat, despite the manual’s acknowledgement of this issue. Hopefully the heat doesn’t affect this device’s lifespan. I hope that this in-depth review has been helpful to all those who have read it. I would recommend this product to others, but I would warn others of the shortcomings this dongle has as well. The $50 I paid for this was a fair price considering the average price for Miracast today. Others at the same or higher price don’t offer MirrorOP or AirPlay -- I’m hoping a firmware update down the road fixes the AirPlay problems.
Tested with:
MirrorOP - Nexus 7 (2012) on Android 4.3
AirPlay - iPad 2 (two different iPads) running iOS7
Miracast - HTC One on Android 4.3 Sense 5
Full HD 1080P WiFi Display Dongle HDMI Wireless PTV Support DLNA / Miracast
http://www.amazon.com/gp/product/B00ESUPKE4/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I just received this dongle. Haven't had time to play with it yet, but will very very soon. I did manage to test whether or not the HTC One would connect and on 4.3 Sense 5, it connects and detects it. It's not as intuitive as I would hope, but I'll elaborate later. iPad connectivity via AirPlay will be tested soon too.
gk1984 said:
I just received this dongle. Haven't had time to play with it yet, but will very very soon. I did manage to test whether or not the HTC One would connect and on 4.3 Sense 5, it connects and detects it. It's not as intuitive as I would hope, but I'll elaborate later. iPad connectivity via AirPlay will be tested soon too.
Click to expand...
Click to collapse
please let us know how it works.
thanks
Sent from my HTC One using Tapatalk
Well, I plan on writing an in depth review later and putting I on the Amazon page too. But some initial thoughts:
So far, miracast works great! WiFi turns off while connecting. Not sure if this is normal or not. Performance is also worse with wifi on, in fact it can be very unusable with wifi on. But this was tested at work so far, home wifi might be a different experience.
If you plan to use any of the other features, I don't recommend setting it up on a wifi that needs to be authenticated - as in if you need to open a website, get a splash screen, and either sign in or accept a license agreement. This is not possible to do on this device and it locked me out of the dongle because it was connected to this kind of network and I had no way to change it.
You download the app to control this device directly from the dongle via ip address. You use the app for everything besides miracast - Dlna, configuration, etc.
I'll update op with full, in depth review after I spend some time with it.
Sent from my HTCONE using xda app-developers app
EDIT: testing at home not disconnect of wifi upon connection. iPad on iOS 7 will see the dongle as an airplay device, but can't connect to it for mirroring, not sure what else to do with it. More testing to come.
Another note for everyone before I write my in-depth review... Airplay doesn't work. The iPad will see the dongle as an Airplay device, but won't connect to it. Tried screen mirroring and just picture sharing, neither worked. Could be something to do with iOS 7 or something.
Sent from my HTCONE using xda app-developers app
Updated OP with in-depth review. Need to revisit two sections after I play with it some more. Will update in a few days.
Not having much success at home either. It works for a little bit, then has problems like I experienced at the university. Still planning to update with more info. But I think I found the company that makes this - the vendor has left this information out and the packaging doesn't include this info either. The specs, description, features, and pictures are all identical.
http://www.vissontech.com/products_detail2/&productId=16a67a7b-4b2c-46f6-8a28-c825a361bdd5&comp_stats=comp-FrontProducts_list01-1337323367416.html
In case anyone wants to investigate further.
Wow! this review is very helpful man. thanks for this review. Now I think I want one :cyclops:
gk1984 said:
Not having much success at home either. It works for a little bit, then has problems like I experienced at the university. Still planning to update with more info. But I think I found the company that makes this - the vendor has left this information out and the packaging doesn't include this info either. The specs, description, features, and pictures are all identical.
http://www.vissontech.com/products_...=comp-FrontProducts_list01-1337323367416.html
In case anyone wants to investigate further.
Click to expand...
Click to collapse
No problem. Shop around though, I think if it supported 5ghz wifi like miracast is supposed to, this would have been a better experience. I just recently discovered that.
Sent from my HTCONE using xda app-developers app
HI,
2 weeks ago I got this unit http://www.win-star.com/eshop/goods.php?id=159
I choice it because of the integrated LAN, and simplified functionality (no android, no need to play with air mouse).
It prove to need it own mouse to switch between different modes, as there no any button on unit itself(only hidden reset)
During first star the Unit create own wifi network so I connect to it my samsung galaxy s4 active. However I was unable to test miracast mode not connect.
Then I switch to "bridge to wireless" trying to connect WS-AV601D1 to my existing network but unsuccessfully. I switch back manually to "AP only" mode, however since then I can not see any more networks from the device itself nor to access WIFI settings(its gray/unaccessible). I can not see anymore the open WiFi network that the device should make. I reset it several times to default settings but it going to "Bridge to WiFi" mode instead of "AP only". WiFi light not switching on at all, and wifi module is unaccessible. WiFi module fail about 10 min after first start.
Note that the unit support only WEP encryption, and have no settings for connection to not broadcasted /hidden SSID. So practically I could not connect it WiFi to my existing network even if it works(unless broadcast SSID and change to WEP)!!!
Further I could test only airplay(android airfun appk) from my s4 active and notebook, and screen mirroring from my notebook only(having the device connected to my network via LAN cable). Using the software provided.
Most important for me was the 1080p video played from notebook to TV quality. So the quality was bad, looks like xvid 700MB rip(or more like x264, baseline, ultra fast, 1000bit/s encoding). Dont understand me wrong quality was fair for animation movies of my son, despite of HDMI playback of same video you can not see each hear and dimple of actors face). There was some sound distortion too, however i dint paly with sound settings of the unit. Upload speed during playback was 2-3mbit, while normal speed within my network is 6-7mbit. Note that the Unit is LAN connected to my Asus RT-N66U.
I already send my back to China and waiting for refund.
So I could not test miracast! Does it provide better video quality when mirroring 1080p video What unit you could recommend
I purchased the iview Mira Cast dongle and it pretty much works the same. I did notice a slight lag in playing videos and sometimes it falls behind. The dlna feature works really well but with no remote you have to push everything from the One or browsing your dlna server with another app. I use skifta.
******************************
HTC ONE (Stock so far) Just got 2013-04-21
Samsung Captivate Glide
Installed:
CWMR5x_i927_recovery.tar.md5
ICS 4.0.4 LiteRom 0.9.0
LiteKernel
dudejb said:
I purchased the iview Mira Cast dongle and it pretty much works the same. I did notice a slight lag in playing videos and sometimes it falls behind. The dlna feature works really well but with no remote you have to push everything from the One or browsing your dlna server with another app. I use skifta.
******************************
HTC ONE (Stock so far) Just got 2013-04-21
Samsung Captivate Glide
Installed:
CWMR5x_i927_recovery.tar.md5
ICS 4.0.4 LiteRom 0.9.0
LiteKernel
Click to expand...
Click to collapse
I brought the ezcast and found playback at 1080p theres a lot of delay at times on gaming and streaming on nvidia shield but with the htc one it wasn't to bad