NEED Urgent Help - Upgrading, Modifying and Unlocking

Hi guys
I have a small issue. I have HP IPAQ 2400 series pda. I have a network in office which has wireless access point which is connected to server through multiple VLANS. I can connect to wi fi point with pda but am unable to ping the server.
if i connect my notebook to same access point and try to ping server it pings without a issue , if I try to connect to PDA to same access point i can ping one pda from another pda but am not able to conncet server on pda . it is server 2003.
My notebook connects fine and i have given same settings on pda to but it that fails to connect
It is HP ipaq 2400m series with windows mobile 5.1.1702 ( build 14366.1.0.1)
Your help will be greatly appreciated .
Thanks
Deepak

any ideas guys?

deepakchauhan said:
Hi guys
I have a small issue. I have HP IPAQ 2400 series pda. I have a network in office which has wireless access point which is connected to server through multiple VLANS. I can connect to wi fi point with pda but am unable to ping the server.
if i connect my notebook to same access point and try to ping server it pings without a issue , if I try to connect to PDA to same access point i can ping one pda from another pda but am not able to conncet server on pda . it is server 2003.
My notebook connects fine and i have given same settings on pda to but it that fails to connect
It is HP ipaq 2400m series with windows mobile 5.1.1702 ( build 14366.1.0.1)
Your help will be greatly appreciated .
Thanks
Deepak
Click to expand...
Click to collapse
1) does your company wifi have "MAC Filter" turn on?
2) does your PDA and Laptop receive the same range of IP addresses with DNS, Subnet & etc defined correctly?

No there is no mac filetring in wi fi network
The ip range is same as laptop and pda.

if the wifi network is set to only G or N rather then mixed mode that could be your issue

Hi
sorry can you help me with G and N wi fi mode ? I mean what it means

Can u pls let me know what g and n type of wifi means

Related

how to set Wi-fi for XDA IIs as adhoc (peer-to-peer)

Hi Everybody,
I can not configure my O2 XDA IIs's Wifi to connect to my notebook's wifi by using adhoc. ( where is the set up page in WLAN to set fixed IP, submask, DNS etc on XDAIIs ?)
My scenario is my notebook connects to office LAN cable. I try to configure WIFI on notebook to let XDA2s can surf internet via Wifi as adhoc.
Thank you for your help
Is there anyone can help me...pls
Anonymous said:
My scenario is my notebook connects to office LAN...
configure WIFI on notebook to let XDA2s surf internet via Wifi as adhoc.
Click to expand...
Click to collapse
It's a matter of *Internet connection sharing* (Keyword I guess...)
Your PC shares its LAN connection and you use it by your WLAN.
Depending on your PC OS version you may have wizzards to help establishing the share.
Jean-Jacques
Thanks
My notebook ( XP w/SP2 ) doesn't have the internet sharing feature on the LAN card at
Local Area Connection properties-> Advance (tab)
But I can see this internet sharing option at the same location on my Wireless LAN card properties.
What should i do to enable it on my LAN card?
Thanks
MR2046
i did it with my imate jam + sandisk wifi sd and sync, share files, do evrything....
just u have to add profile in ur PC/Laptop SSID with operating mode (Ad hoc), then scan with ur XDAIIs untel u find ur pc/laptop and connect.
btw, u need to configure network connection ip for both and make pc (192.168.100.1) - XDAIIs (192.168.100.2) subnetmask for both (255.255.255.0)
thats all :wink:
NightmarE said:
u need to configure network connection ip for both and make pc (192.168.100.1) - XDAIIs (192.168.100.2) subnetmask for both (255.255.255.0)
thats all :wink:
Click to expand...
Click to collapse
Isn't there a matter of gateway to be configured somewhere in the IP settings of the Wireless ?
I'm not sure of the one needed (PC vs. ISP)
Jean-Jacques
no need, coz the gateway just for a network between server and many PCs or for specific configurations, but at peer-to-peer mode (like computer to computer wire network) no need for Gateway. if u need more info take look here http://www.makeitsimple.com/how-to/simple.htm
laters 8)

[HELP!] PC network problems when connected with Bluetooth PAN internet sharing.

Hi there, I have a big problem that will force me to downgrade to WM5 if I can't solve it.
Here's the facts:
I don't have a telephone line at home and I'm connecting to internet using a flat GPRS/UMTS connection with Vodafone using my TyTN as bluetooth modem (using the old WM5 DUN profile).
Since I upgraded to WM6 (and I love it) the DUN profile and Wireless Modem has been replaced by Internet Sharing application. It works very fine but it messes up my network connection with my other PC.
I used to share the internet connection this way: the bluetooth modem was connected to my main PC (AMD Sempron). The LAN (manually setted up) on this PC was: 192.168.0.1 / subnet 255.255.255.0. The LAN (manually setted up) on other PC (AMD Athlon) was 192.160.0.10 / subnet 255.255.255.0 / gateway 192.168.0.1. It all worked very fine.
Now as I connect the PAN bluetooth internet sharing my main PC (Sempron) acquires a new network address (the TyTN seems to be automatically setted as 192.168.0.1) so the LAN on the PC is 192.168.0.153 /subnet 255.255.255.0 /gateway 192.160.0.1 and the connection works fine but I'm not able anymore to connect via LAN tothe other PC even if I try different LAN settings on the Athlon (I tried to manually set it as 192.168.0.10 /subnet 255.255.255.0).
Who can tell me how to configure the LAN setting on the 2 PCs so that I can access internet enabling PAN bluetooth on the TyTN with the main PC (Sempron) and still continue accessing remote folders and files via LAN on the other PC (Athlon)?
It would be great if I could share the connection with the 2 PCs like I did before, but I'll be ok if I can connect to internet with one and have a working LAN between the 2 PCs.
Hope I explained it well.
Waiting for suggestions. Thank you!
Pick a machine that is to be the internet gateway. Do this by initiating the BT PAN network on the first machine. On the first machine's IP stack, Enable Internet Connection Sharing. On the second machine, use the first machine's IP as your default gateway.
You should then be able to access the internet from both machines.
marty_73 said:
Hi there, I have a big problem that will force me to downgrade to WM5 if I can't solve it.
Here's the facts:
I don't have a telephone line at home and I'm connecting to internet using a flat GPRS/UMTS connection with Vodafone using my TyTN as bluetooth modem (using the old WM5 DUN profile).
Since I upgraded to WM6 (and I love it) the DUN profile and Wireless Modem has been replaced by Internet Sharing application. It works very fine but it messes up my network connection with my other PC.
I used to share the internet connection this way: the bluetooth modem was connected to my main PC (AMD Sempron). The LAN (manually setted up) on this PC was: 192.168.0.1 / subnet 255.255.255.0. The LAN (manually setted up) on other PC (AMD Athlon) was 192.160.0.10 / subnet 255.255.255.0 / gateway 192.168.0.1. It all worked very fine.
Now as I connect the PAN bluetooth internet sharing my main PC (Sempron) acquires a new network address (the TyTN seems to be automatically setted as 192.168.0.1) so the LAN on the PC is 192.168.0.153 /subnet 255.255.255.0 /gateway 192.160.0.1 and the connection works fine but I'm not able anymore to connect via LAN tothe other PC even if I try different LAN settings on the Athlon (I tried to manually set it as 192.168.0.10 /subnet 255.255.255.0).
Who can tell me how to configure the LAN setting on the 2 PCs so that I can access internet enabling PAN bluetooth on the TyTN with the main PC (Sempron) and still continue accessing remote folders and files via LAN on the other PC (Athlon)?
It would be great if I could share the connection with the 2 PCs like I did before, but I'll be ok if I can connect to internet with one and have a working LAN between the 2 PCs.
Hope I explained it well.
Waiting for suggestions. Thank you!
Click to expand...
Click to collapse
silverfox0214 said:
Pick a machine that is to be the internet gateway. Do this by initiating the BT PAN network on the first machine. On the first machine's IP stack, Enable Internet Connection Sharing. On the second machine, use the first machine's IP as your default gateway.
You should then be able to access the internet from both machines.
Click to expand...
Click to collapse
Ok, I started the BT PAN on my main machine (AMD Sempron) but how do I enable the connection sharing? When I was using the DUN connection I used the Advanced Options section to enable the Connction Sharing, but where do I find this opzion now?
On a Windows Machine the IP range to be assigned when Internet Connection Sharing is turned on is 192.168.0.x. That is also the range used by Internet Sharing on the phone. This is a routing conflict. You cant have a 0.x being handed out from the phone to the 1st computer and then have that computer handing out 0.x addresses to any other computers. The IP range the Phone hands out needs to be regedited to something else like 192.168.1.x As far as I know, you cannot change the address range in Windows Internet Connection Sharing. You will have to do it on the phone.
If this helps.

wifi surfing and sms filtering

hi ppl !
just bought usb wi for the pc and the idea is to use BAs wi fi to connect to PC and to use his shared internet connection...
PC have network card attached to adsl modem, internet connection is shared and wi fi is attached to the usb, I ve managed to connect to the wi fi with the BA (ad-hoc) but when I open IE (on BA) it report that he cant open the web page.
Im quite confused with the BAs setting network to connect to work and the internet...
How can I explain the BA to use that wi fi to connect the internet via the PC ?
Beside that, is there any working sms filtering software... Guy from my company bothers me all the time while im not at my work with the work informations so I want to cut him off and take a rest after the 5PM. Is there any working sms filtering software where I can enter the sms numbers and after that BA stop ringing when sms come from those numbers.
best regards to community !
Have you tried making a network bridge between your wifi net work and your adsl connection?
heres how on win XP,
start > controll pannel > network connections
select your ADSL connection and the WIFI connection, then right click and select "bridge connections"
That might help, give us a shout how it goes

wifi 2 laptop?

Hi I have m700 with a wifi connection and an olde laptop with no wifi, I have upgraded it with vista (My laptop) and can connect the pda via WMDC, and also have modem link in schap's wm6 rom. is there software or a possible way to use my m700's wifi connection through usb on laptop, then use the laptops internet like wifi card/adaptor? any help appreciated. v
http://msmobiles.com/news.php/6999.html
Rudegar said:
http://msmobiles.com/news.php/6999.html
Click to expand...
Click to collapse
I have tried this already, this just routes ad-hoc (computer to Computer) wifi connection, the wifi I connect to is infrastructure. I need to use the wifi in my pda and somehow to use it through the usb port into my vista laptop, like as a wireless receiver or using the pdas wifi whilst its connected. thanks for that route, but been there, unless i'm missing something. please let me know if so. thanks
I see what your trying to do but im not sure you can do that,
I havnt tested it but i would try this:
you could give your PC a static IP and find the PDA's IP when its connected to your laptop via USB, then enter
Attach your PDA to a WiFi network and find its IP, then connect your laptop to the PDA via USB, then give your laptop a static IP in the same subnet as the PDA and give one of the DNS servers as the PDA's IP and the other as the DNS server thAt the PDA has picked up from the WiFi network.
Make sure IE is set to 'automaticlly detect proxy setting'. In my head this should work but i have found what i think and what can actuly happen is VERY different.
Let me know how it gets on or at least post the outcome.
Thank you
jab1a said:
I see what your trying to do but im not sure you can do that,
I havnt tested it but i would try this:
you could give your PC a static IP and find the PDA's IP when its connected to your laptop via USB, then enter
Attach your PDA to a WiFi network and find its IP, then connect your laptop to the PDA via USB, then give your laptop a static IP in the same subnet as the PDA and give one of the DNS servers as the PDA's IP and the other as the DNS server thAt the PDA has picked up from the WiFi network.
Make sure IE is set to 'automaticlly detect proxy setting'. In my head this should work but i have found what i think and what can actuly happen is VERY different.
Let me know how it gets on or at least post the outcome.
Thank you
Click to expand...
Click to collapse
WOW! you know ur stuff, but i wouldn't know the first thing about the info you gave me. do a dummies guide and i'll try it. cheers for the info tho.
Hmm, dunno if that would work - no harm in trying though..
If you connect via usb then it will setup from the activsync and the dhcp within it, normally along the lines of 169.254.2.2 - but you would have to use this subnet to switch the laptop too (don't use 1 as that will most probs be the dhcp svr) in order to communicate with the device and this is where I see the problem.
You would only be connecting to the device, u can not use the wireless subnet as you have no connection to this just the pda, so if you set your laptop to the subnet of the wifi by rights the network should just look at you blankly as it will not be able to see past the activsync connection to get to the wifi subnet.
Or at least that's how I'd see it happening.
I think i'll just buy a wireless receiver. lol. haven't got a clue what you are both telling me. thanks anyway. maybe somebody can create a cab with settings if poss, or a program?
would there not be a hack or reg change, which in the wifi-router download at start of thread, which will add or change the ad-hoc connection to infrastructure instead? or would this be impossible? thanks
btw: you a running vista on a laptop which is so old that it doesn't have wifi???
i think you should go for a wifistick (~ 10-15 €?!?)

Wlan Connection with Laptop

Hi to all
I have a problem. I want to connect my Trinity over Wlan with my laptop and then use the laptop for internet on the trinity.
What settings do I have to make?
Please help...
Regards
Try this http://forum.xda-developers.com/showthread.php?t=357152
thank you for your answer....
but I don't want to use the pda to connect the laptop with the internet
I want to connect the pda with the laptop and then use the internet of the laptop(it is connected with it over lan) on my pda...
is this possible?
It is possible.
This is what I do:
-I hook up my xda to my laptop,activesync starts recognizing the device and select the "Allow data connections................on your device while it is connected to your computer"
-Press next it saves the settings,synchronizes,after that I open the browser on my pda.
Give it a shot and see what happens.
Maybe is a matter of rom.
but I want to go with the wlan into the internet....
not with usb....do you have a conclusion for that....?
pls
Ok...so you want your laptop to be like an AP and get online wirelessly?
yes....exactly...
is that possible?
Thorwaler said:
yes....exactly...
is that possible?
Click to expand...
Click to collapse
just doing this. writing on pda, wifi (wlan) to laptop and per cable router into internet.
what did i do, apart from loosing my hair, seeking the trick ...
please excuse my bad discription, but my WM6 and my XP both are in spanish.
pc: network connections/wireless connection/properties/last card
set share this connection, activating "others from other net may use internet on this pc"
pda: config wifi/adapters/ieee802...
set IP from server, leave gatway free. dns, no idea if necesary, but i set them to i.e. 194.179.1.100
atention: donot use bridge/gatway option to link lan and wlan. wifi to pda will no connect properly.
THANKS....
finally its working^^
Thorwaler said:
THANKS....
finally its working^^
Click to expand...
Click to collapse
Sorry man I couldn't help you out?
no problem....^^

Categories

Resources