Related
Hi, I upgraded to WM6.1 over the weekend, everything looks pretty cool.. But IE can not get on the internet anymore.
I'm able to check the email okay but IE reports the following error
HTTP ERROR $CODE$
I see the Edge (E) come up when I launch the IE so that means IE is trying to open the connection but does not bring anything back.
Someone please help
That is the same error I get.
I scanned pretty much all related thread did not find anything yet...
Pig Vomit said:
That is the same error I get.
Click to expand...
Click to collapse
Hi, Newbs. When you flashed your phone did you use the "Sticky: The Guide for UPGRADING WM 6 to 6.1 with PICS and LINKS" I'm pretty sure you both skipped a step naughty naughty....
Well if you go to the Sticky and look at post #3 and run your connection setup like you were suppose too, we wouldn't be having this conversation . It honestly should be that simple.
Good Luck
Manual Settings: http://tmobileuspublic.wdsglobal.co...=phone.vm&selectManufacturerId=9&phoneId=1828
hahah
naughty naughty
thats way better than my approach...
Never a Thank You nor friendly follow up reply either...you ever notice that Gixxum.
pfunkside said:
Never a Thank You nor friendly follow up reply either...you ever notice that Gixxum.
Click to expand...
Click to collapse
i dont expect one....most the time i deserve a follow up kick in the nuts =)
but you were polite, so yes, you got screwed.
ps. THANK YOU FOR FIXING MY INTERTUBEZ.
Internet Explorer not working?
I've been able to figure out every other problem with my IE, but now this one has stumped me, and i need help.
i'm using Wifi, and for some reason i cant go to any websites. even a site such as google wont work.
I get an error that says "The page cannot be found. Check the name and try again."
and i know for a fact that im not typing in "http://www.google.com" wrong. its not a hard one.
its not my connection. im sitting right next to my wireless modem and router and my computer is working fine. in the Comm Manager i have full Wifi service.
There was at one point when i a site to work, but then IE went back to the IE homepage on its own and wouldnt work again.
SOOO pleaseee, if anybody can help, please do
Thanks guys =]
Hi guys.. just checked my thread again now after coming back home. many thanks for replying..
BTW I did run the connection setup multiple times after deleting the settings and all other possible options... but nothing worked.
I just tried setting up proxy mannually but NO GO.....
Looks like I'll have to run the kavana upgrade again..
Many Many Thanks for taking time to reply... I always try to follow up and appreciate people who respond.. thats the least one can do
gixxum said:
i dont expect one....most the time i deserve a follow up kick in the nuts =)
but you were polite, so yes, you got screwed.
ps. THANK YOU FOR FIXING MY INTERTUBEZ.
Click to expand...
Click to collapse
Not sure if this will help but...
I have found that if I switch networks from my "E" data plan to my home WIFI, or vice-versa, I have to quite IE (press the pink tmobile button and select "close" for IE) then restart it and viola it works. I seem to have to do this anytime I was using IE on one network and then connect to another without my phone being turned off at anytime in between.
Hope that helps.
WM6.1 Internet setting !!!!! HELp!!!
I recently flased the wm6.1 v24 on my phone and now i dont have internet. I have tried using the 5.99 plan with proxy and no luck. Right now i have the 19.99 feature but still dont get any internet. Anyone have the setting to make it work with tmobile? (19.99 plan)
ALl i get is I dont have accessed to this site, or http error.
dabezt1 said:
I recently flased the wm6.1 v24 on my phone and now i dont have internet. I have tried using the 5.99 plan with proxy and no luck. Right now i have the 19.99 feature but still dont get any internet. Anyone have the setting to make it work with tmobile? (19.99 plan)
ALl i get is I dont have accessed to this site, or http error.
Click to expand...
Click to collapse
If you are running Ricky's v24:
Start > Accessories > Connection Setup
Run the Connection setup, select United States and T-Mobile. I think that you'll need a reboot after the settings update.
I 2nd That
That's exactamundo correcto. Trust this man. He is dead on.
ruinertt said:
If you are running Ricky's v24:
Start > Accessories > Connection Setup
Run the Connection setup, select United States and T-Mobile. I think that you'll need a reboot after the settings update.
Click to expand...
Click to collapse
having the same problem and after running the connection set up again still getting the "http error $code$ $message$ requestURI=/"
I'm on the 5.99 t-zones. the really weird thing is right after the flash it was working then tried it about 30 min later and nothing. I've tried about 4 different variations of manual settings I can find. Any help?
I'm having the same problem with internet after upgrading to 6.1. Yes I have ran the connection setup and let it reboot, tried it twice with no luck. Txt messages still work, just doesn't seem to access any internet sites. I'm using the 19.99 plan and running Kavana's 6.1 080408 final. I have also tried using the manual settings provided by Tmobile
Any ideas?
does your MMS work?
if not call t-mobile to reenter you into their network. 5 minute call.
do the connection setup then do the tzones hack it worked fine for me and this is the second dash after my first one went out. Not one problem installing anything use search I dont post must as u see but I have done plenty of mods on thru this site without asking questions all the answers are out there just search and read.
HI, I am just starting out with the flashing of ROM's on my Telstra JasJam. I actually went to a Imate Ultimate 9502 and put the JasJam back in the box but after that failed and went back to Imate for repair, we all know how "quick" they are at repairs I pulled the JasJam out and went looking for a new 6.1 ROM for the JasJam.
I found CRC's ROM and flashed HardSPL before flashing, got CRC's 13.3 stable normal ROM on and all was going along great.
Issue I am having is when I go to the Telstra WAP site to access my Foxtel subscription I get a different telstra homepage. It is the old blue and white checker page that has icons down both sides. It is not the new homepage that has the icons with "free to browse" and "foxtel" tabs.
I installed the Telstra 5.5 cab and the My Place cab which didn't fix the issue. After a lot of looking around and reading I found the streaming URL for Foxtel and when I try to access it is says that my handset is not compat and to call Telstra.
It reminds me of the time back in WM5.0 when Foxtel first came out and the JasJam did not support it, it took an update to fix it.
So I am leaning towards a radio?? version issue maybe???
Can anybody help?
I PM'd CRC himself and he pointed me here.
Can anyone shed some light, had the same problems?
thanks in advance..........
I'm not sure of your exact issue, but it wouldn't be in the radio.
I'm guessing they might be using a proxy. My provider has a proxy to access their internal pages, and without it enabled it just never shows them. I'm on Cincinnati Bell.
Hopefully this will help you search, or someone using the same network will chime in.
Thanks for the reply.
Yeah Telstra do use a Proxy and you can set it either with their software package or via the network connections. I am doing this as without it you can't even get to the Telstra homepage.
Turn the proxy off and the Telstra homepage times out .....of course!!
But this is where my issue is, with the proxy on the homepage that loads is not the current one even though I am getting the http://wap.telstra.com/wap site via the "Telstra My Place"
Over night I flashed my spare JasJam, I purchased a JasJam off ebay for
"el-cheapo", its been abused but still works OK, and loaded the official WM6 on it. Put my SIM in and got straight to the telstra homepage where I can access the Foxtel website and the "free to browse" tab.
I can only assume that is has something to do with the radio.
Can somebody please explain the radio and how it works. I am struggling with this part as I am unable to find any good info on it.
cheers
The radio just handles the packets of information. It doesn't have anything to do with where the info comes from, or goes to.
Just like a different network card, or, network card firmware won't get you to a new web page.
I'm sure it's something to do with a network setting or proxy setting.
Hopefully someone on Telstra can chime in.
OK, so how do I understand 2 JasJam's with exactly the same settings via Proxy and network setup go to 2 different web pages?
I put WM6 on one and then insert my SIM, I get to the correct page when you browse the http://wap.telstra.com/wap and then I put CRC's ROM onto the other with WM6.1 and insert my SIM and then get to the incorrect site.
So I thought, as a wild guess, its the phone. So I did the opposite with flashing. I flashed the JasJam that had WM6 and was getting to the correct site with CRC's ROM and as I suspected I could not get to the correct site.
The error message tells me my phone is not compat with the service. I put the WM6 ROM onto the JasJam that could not get to the telstra WAP homepage and yep, it worked flawlessly.
It must be something to do with CRC's ROM, is there anyone else out there, PLEASE, that is on the NextG network and using CRC's 13.3 normal ROM and can get to the telstra WAP homepage that allows you access to Foxtel and the "free to browse" tabbed content???
Or anyone using one of CRC's ROM's, any version of WM6.1 that is working as it should?
Can anyone suggest a WM6.1 ROM that will work with Telstra Foxtel service?
Any help would be appreciated?
I know it all works on WM6.1 as I have, in the repair shop, a Ultimate 9502 that has no problems browsing the WAP site.
thanks again.........
Ahh, It might be something with the way the browser is reporting itself. That, I'm not sure how to fix. Might be able to use schaps advanced config to see what each of them are reporting, and try to make it match.
yeah I am unsure about that one. I installed Opera as well and get the same page.
This is definitely one for CRCinAU himself. I did PM him but he said to go to the forum. So far that hasn't been much help.
I searched for the other ROM you mentioned, schapp? I am not having much luck.
can you point me in the right direction for that, I'll give it a go and see what the differences are.
thanks for your replies. Seems that there are not many local users of the CRC 13.3 ROM on the Telstra network, or they don't use this feature and are unawares of it.
I ask again, if anybody can help with this one I would really appreciate it.
Can anyone tell me if they know of a WM6.1 ROM that is fully working on the Telstra NExtG network and able to use all the features provided by the "MyPlace" and WAP sites?
I cannot even look at any of the features on the WAP site, when you click on the icons to go to say, ringtones or movie info I get a web page error saying my hanset is not compatable. Very frustrating for such a lean, fast and app packed ROM!!!
cheers
Here is his xda dev post about it http://forum.xda-developers.com/showthread.php?t=418151 but the download link seems to be broken or is down at the moment.
Here is my copy of advanced config http://www.filedropper.com/advancedconfigurationtoolv33
all kinds of settings in there, also, you should be able to load advanced config from crc's device update(should come in crc's rom).
I think you will find your answer Here you need to change registry setting for compatibilty issue
Regards
Thanks that fixed it. Exactly the issue.
Its funny I looked at that string before and tried a few different options but nothing changed. Knowing the exact string did it!!
Thanks to everyone who replied and thanks to CRCinAU for a very nice ROM, which is now working as I want it to.
cheers
I have been through all the wiki as well as other site recommendations on MMS settings that would allow a Dash to send/receive MMS on AT&T. I have a Kaiser on the account and have used its settings as a guide also. All efforts so far have not worked. Texting works fine. There's one MMSC setting called "contact via" where the options are in a prepopulated "drop down" menu. The comparable setting in my Kaiser at this spot is set to MEdia Net. Of course this is not available in a fixed menu T-Mobile device. I have tried all available settings in that menu...nothing. Any ideas would be greatly appreciated.
search using "att data" i set some tags last week on a thread that explained everything about this.
Thank you
Thanks phatmanxxl,
With your suggestion I found a configuration I had not seen before. I've now sent mms in both directions and it seems to be fine.
Thanks again!!
I have an unlocked Excalibur from Orange I am usinon TMobile and am having the same problem getting MMS working on my phone.
Hoping I can find a solution as well, as nothing tried so far has worked.
disco.sleeze said:
I have an unlocked Excalibur from Orange I am usinon TMobile and am having the same problem getting MMS working on my phone.
Hoping I can find a solution as well, as nothing tried so far has worked.
Click to expand...
Click to collapse
Not to sound like a broken record but always check the Wiki I think you'll find the t-Mobile setting there.
Yes, the settings are in the wiki.
However, after inputing them and checking them a dozen times it's still not working.
disco.sleeze said:
Yes, the settings are in the wiki.
However, after inputing them and checking them a dozen times it's still not working.
Click to expand...
Click to collapse
What rom are you using?
(At&t's HTC Tilt 2 Unlocked, original ROM, win 6.5
)Guys, this is driving me nuts.
When I connect to the internet, via EDGE, both my browsers can't download data at all.
It's really weird.
I can send email on all of my accounts, use my facebook app, etc. It's just the browsers (IE and Opera) that are dead.
I have soft and hard reseted my device, and nothing changes.
When I'm WiFi, everything works Ok.
Any known issues about this?
Thanks,
Dan from Costa Rica
(as soon as I solve this, I'm planning on starting some serious mod of the phone... coming from an old HTC P4350, it's a huge step fwd).
perhaps, you have disabled the "proxy" - try enabling it.
My connection doesn't require a proxy... it's really weird, it was working OK a couple of days ago.
Shot it the dark, but look at Start -> Settings -> Connections -> Connections
Look at the Advanced tab and click on "Select Networks"
Make sure both drop-downs are set to use the correct connection. Not sure what it'll be called on yours, but on mine (T-Mobile) they are both set to "T-Mobile Data"
Also make sure your Wifi isn't on, but not connected to a network, when trying to browse. I find that if my wifi is on, but not connected, all browsers still try to use the wifi and fail.
Good luck,
notaliberal,
Thanks for the tip.
For some reason I had one of them set differently, BUT it's still dead.
Again, I'm pretty sure it's no the phone, since my emails work efforrlessly.
I'm pretty sure something happened with the config.
Damn, it's driving me crazy.
guys, Ok, this is driving me nuts.
I have discovered a couple of details that I think are important.
I have managed to make the BROWSERS work... but it's no a definite solution.
When I turn on the DATA CONNECTION, I was able to check emails, and use Facebook App with no problems at all.... but no browsers worked.
I found out that if i turn on my WiFi, but DO NOT connect to any network, now the browsers work perfectly. This gives me like 10-30 minutes of my browsers to work, but after that time I loose acces to data again.
I have to turn on the Wifi, and turn it off, to gain access again.
It's so confusing and weird, because I haven't read anything like this in the whole forum.
It seem that it's not a hardware thing, but a firmware or software issue... or am I missing something here?
Maybe this will help:
At&T Tilt 2 Original ROM
When turned on:
B 80
R 4.48.25.20
G 61.39tc.25.30h
D 1.59.67150
I had a similar problem and it turned out the carrier had put a bar on my internet usage, from long ago without my consent... Funny thing was, I could access the weather, update time and emails with no problem from my old Hermes but once I got the rhodium I couldn't.
Might be your carrier doing funny things....
Ultramag, and by any chance do you know what should I do to solve this? or what did you do?
The problem is that I don't know anyone with another Tilt2 to check if it's the phone or what.
Tonight I'll be checking with my old HTC P4350 to see if I have any trouble conneting.
Thanks.
Neu
Are you using a Tilt2 with stock AT&T Rom on a non-AT&T network? If so, maybe the best solution would be to install a custom rom. The old AT&T network connections might be getting in the way of your carrier settings. If you don't want to flash a custom ROM, go to settings, Connections, Advanced (tab), Select Network, and check that the programs are being directed to your carrier's connection. Also check on your browsers that they are set to connect to Internet, and not Work Network or anything else.
Jose, yes, I'm using AT&T ROM on a non AT&T network.
I did as you said, on the Advance tab set BOTH to connect to my carriers settings, and I still have the same problem.
I trid to do the second thing yu asked me to do, but I don't know where to find those settings on my browsers (IE and Opera).
If I have to install a costum ROM, I'd like to try first a ROM that's really basic... maybe an official HTC 6.5, to start. Any one like this that you could recommend?
Had to contact the carrier. Got stuffed around a lot. Luckily for me I knew someone who worked in a store, they got in contact with the faults department and 3 weeks later it got fixed.... Was a major pain in the arse though...
I just saw on the HTC page, that there is a ROM that is newer than the version I'm using.
Mine is from 09/25/2009 according to the Device Info, and HTC has a version from 02/05/2010
It's REALLY driving me nuts, so I hope this thing solves the issue.
Neuralgia said:
Jose, yes, I'm using AT&T ROM on a non AT&T network.
I did as you said, on the Advance tab set BOTH to connect to my carriers settings, and I still have the same problem.
I trid to do the second thing yu asked me to do, but I don't know where to find those settings on my browsers (IE and Opera).
If I have to install a costum ROM, I'd like to try first a ROM that's really basic... maybe an official HTC 6.5, to start. Any one like this that you could recommend?
Click to expand...
Click to collapse
A guy from India posted about a month or so with a similar problem, he had an unlocked T-mobile programed it with his carrier settings yet the browsers were not working, had to install a custom rom to solve it. I think some registry keys have the browsers going through different network settings. Have you tried using Skyfire, or Opera 10? Maybe a browser that didn't come with the phone will work.
Regarding custom roms, I've only used Energy's since I flashed my Tilt2, and they've worked great for me. If you want a clean rom, I've heard Da_G has one, and he's pretty well respected here. Just in case you're not aware, before installing a custom rom you have to install HardSPL and do some reading. Check the sticky threads in the roms sections. And Tilt2 phones need a CAB before they can be HardSPLed, check this page http://tilt2.blownfuze.org/.
Guys, I just updated my ROM wit the AT&T one, and the problem is still there.
I guess I'll have to install a costum ROM.
I'll follow the instructions from here:
http://forum.xda-developers.com/showthread.php?t=550540
But they never mention any CAB before the HardSPL? :?
-*-*-*-*-
Last dumb question:
Since I'll be testing new ROMS, once I HardSPL the phone and try a new ROM, i f I don't like it, I just have to flash a new ROM on top of the old one right? no more HardSPL? (aka HardSPL must only be done once?)
My main concern is that at first, I want a ROM as close to the original, but without all the AT&T crap.
Obviously, now I want something that solves this stupid problem with my browser, and now that someone in India had the same issue, I now it's not a matter of hardware.
Thanks.
Neu from Costa Rica
PS: Myphonw came both with Opera and IE. Actually Opera gives me much more trouble that IE with this issue. Unfortunately, now Skyfire only works on certain countries, and Costa Rica is definitely NOT one of them
It's not hardware or a ROM issue. Most likely that it'll be fine with a custom ROM, but I only use official At&t ROMs.
I had the same issue, as I don't use At&t as my network, and I fixed it. My IE and Opera, and other built-in phone services work fine.
Neuralgia said:
Guys, I just updated my ROM wit the AT&T one, and the problem is still there.
I guess I'll have to install a costum ROM.
I'll follow the instructions from here:
http://forum.xda-developers.com/showthread.php?t=550540
But they never mention any CAB before the HardSPL? :?
-*-*-*-*-
Last dumb question:
Since I'll be testing new ROMS, once I HardSPL the phone and try a new ROM, i f I don't like it, I just have to flash a new ROM on top of the old one right? no more HardSPL? (aka HardSPL must only be done once?)
My main concern is that at first, I want a ROM as close to the original, but without all the AT&T crap.
Obviously, now I want something that solves this stupid problem with my browser, and now that someone in India had the same issue, I now it's not a matter of hardware.
Thanks.
Neu from Costa Rica
PS: Myphonw came both with Opera and IE. Actually Opera gives me much more trouble that IE with this issue. Unfortunately, now Skyfire only works on certain countries, and Costa Rica is definitely NOT one of them
Click to expand...
Click to collapse
The CAB before HardSPL is mentioned here: http://tilt2.blownfuze.org/
Some people have posted on Energy's thread saying they can't use HardSPL with a Tilt2, and they were told that a Cab is needed, I assume the one posted on that website. HardSPL is only needed once, after using it you can flash and reflash TP2 roms and radios as long as they are for GSM phones.
Using Task29 is recommended before flashing roms, some people claim that flashing a new rom might not clean everything from the previous one, which causes glitches. For safety purposes I've start doing that, but I've never had any trouble when Task29 was not available.
Regarding a rom close to AT&T stock, I can't help you with that, you'll have to look at the different ones available. Since AT&T just came with a new version it's likely that many chefs will use it as base, but how far they modify it will depend on each one.
Grahammm said:
It's not hardware or a ROM issue. Most likely that it'll be fine with a custom ROM, but I only use official At&t ROMs.
I had the same issue, as I don't use At&t as my network, and I fixed it. My IE and Opera, and other built-in phone services work fine.
Click to expand...
Click to collapse
Graham, the question is HOW to fox it without a custom ROM.
I finally figured it out.
It seems that it's a PROXY issue.
Looking more into xda forums, I found out that there is a small program under START>Tools> Proxy Manager where you can Disable Proxy Settings.
Unfortunately, that ONLY fixes Internet Explorer.
Reading some more, you can fix Opera by entering on the address bar "opera:config" (without the ") in the proxy settings, remove the HTTP proxy and HTTPS proxy (leave blank).
The only problem is that this settings are removed in Opera with a soft reset.
the only way to change Opera settings permanently is to edit \Windows\Opera\opera.ini and set the Use HTTP and Use HTTPS proxy settings to 0, then soft reset.
Thanks to user Moltenfire (original post http://forum.xda-developers.com/showpost.php?p=5120862&postcount=3)
Thanks for all the help guys... Thanks to you, now, after all this, I'm decided to give the Simplicity ROM a try
-*-*-*-*-*-
Edit: It seem that after Opera 9, which is the one that came with my Tilt2, the settigs changed through opera:config STAY even though you reset your device.
I realized this because I didn't install Total Commander yet, did quite a lot of reseting, and Opera is working perfectly... so is IE!
PS: Just in case, in Opera9 the settings are called "HTTP server=" and "HTTPS server=" and must be left BLANK... in case you need to edit the opera.ini
Hi all I've been a member here since my first HTC8525 and all of you have helped me tremendously. But today I believe I need to ask for help. I just recently purchased a T-mobile HTC Touchpro 2 and brought it back to Canada to run on the Rogers network. I have unlocked the phone and set up everything fine. My only problem is that I cannot change the MMS setting in the phone Tmob has locked them out. Could anyone point me in the right direction. I have searched the threads and to no avail. Any help at all is greatly appricated. Sorry if i am repeating earlier threads.
same issue here, im trying to change the setting on my tp2 but it is locked for changes, i cant even add a new setting.
i did the changes when i had my tilt 2 but here i can't any help please.
thanks in advance
sorry for posting it when the answer was already there. but anyway you can change some of the settings via registry.
hkey local machine/software/arcsoft mms ua/config/
hope it's helpfull
then what
what other steps do you take after that?
Unlocking the device via Hard SPL to accept other ROMs will allow you to flash any of a ton of ROMs for this device that allow editing of MMS settings. Most custom ROMs are faster, lighter, and generally prettier than the stock one. Otherwise, as I recall, you'll need the IP address from the cell network to change the MMS gateway in the registry. Good luck getting that from a carrier.