Develop Bugs

Boot Screen

Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36

Thunderhawk36 said:
Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36
Click to expand...
Click to collapse
use this file. just copy it in windows dir and soft-reset.

ai_99 said:
use this file. just copy it in windows dir and soft-reset.
Click to expand...
Click to collapse
Sorry, but i'm looking for the screen just before the welcome screen.
The one where the Rom Version is shown.
Thanks
Thunderhawk

Hmm.. how many times do ya actually reset your phone to look at that screen?

MasK said:
Hmm.. how many times do ya actually reset your phone to look at that screen?
Click to expand...
Click to collapse
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk

Thunderhawk36 said:
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk
Click to expand...
Click to collapse
getting on my nerves too.. want a nice bluefish over there... have figured it out?

Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly

markquinton said:
Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly
Click to expand...
Click to collapse
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?

There was a way I heard of using the RUU and replacing a file with the new image you wanted for splash...
"Perhaps you should look at this thread: http://forum.xda-developers.com/viewtopic.php?t=12898.
There is a great program on there for converting pictures to .nb files and also a CAB which, when run, will change the boot images.
This does require putting the splash1.nb and splash2.nb files into the /windows/ directory before running MDA3_bootimage_changer2.CAB,
but if you want to just run a CAB file you can just edit that CAB and place your own created splash1.nb and splash2.nb files
in it with the location set as /windows/ (I tried it with WinCE CAB Manager and this way works as well)."
http://forum.xda-developers.com/showthread.php?t=231632

eppoeh said:
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?
Click to expand...
Click to collapse
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place

markquinton said:
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place
Click to expand...
Click to collapse
B&B? Did i miss something?
Tried two ways:
1: making the splash1 and splash2
2: tried RUU updating the splash, but fails, think it's the new activesync.
Did i mention that i'm trying this on a htc p3300?

Sorry, B&B is Black & Blue. Its the ROM that Tom Codon has been releasing and updating for the P3300\Artemis\Orbit.
Can be found here: http://forum.xda-developers.com/showthread.php?t=314568

http://www.4shared.com/file/19395089/5971579/Upgrade_HTC_First_Splash.html

dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362

zrays said:
[IMAGE]
dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362
Click to expand...
Click to collapse
Can somebody please explain the chinese over there? Or give another diescription?

Getting the message: "The image file is corrupted. Please check your Update utility"

eppoeh said:
Getting the message: "The image file is corrupted. Please check your Update utility"
Click to expand...
Click to collapse
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though

eppoeh said:
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though
Click to expand...
Click to collapse
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)

eppoeh said:
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)
Click to expand...
Click to collapse
WOOT, Finally, i got things running
How i did it:
search the forum for: "3-splash-screens.txt"
do step 2 (might run it in a dos box, to see errors)
search the forum for: "dutty's good NBH tool v1.1"
make the nbh file
flash it into the phone

Dudes Guys
ZRAYS give you the link on post 14.
Just download the right file depending on the logo you want.
Weblink : http://www.aray.cn/?cat=34
zip files are:
P800-logo-dopod.rar
P800-logo-HTC.rar
P800-logo-HTC-new.rar
P800-logo-O2.rar
P800-logo-Orange.rar
P800-logo-T-Mobile.rar
Shall I install it for you then...
Unzip the file go on folder etc... (backup your data, but this upgrade does destroy it) launch ROMUpdateUtility.exe
..wait and smile.

About Hard Spl 1.13 Oli Plz Help!

i tried to upgare my bootloader
with the black edition but when i start the rom upgrade it asked me what boot loader i have
so i had 1.01
when i give that option it tells me to run the rom only with mityy
but i saw an option in the rom upgrade that say force spl so i choos that option and after few second it finished and i see i have 1.13 oli
so it works that way because i didnt peek version in the rom upgrade i just peek the force spl
????

yes, it worked... as you can tell BY THE FACT YOUR PHONE IS STILL OK... why the hell did you waste YOUR TIME AND OURS by posting a whole ****ing topic telling the world "whoopee my flash succeeded because I followed instructions."

sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?

Yea, And if you would have read the Hard SPL thread or the Upgrade Guide by MrVanx you would have known what to do! I guess it's good someone like Olipro took the time to create this!

bubu23 said:
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Click to expand...
Click to collapse
nope... you don't need to do anything at all, that's completely in your head.

yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope

bubu23 said:
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
Click to expand...
Click to collapse
IT WORKED, IT WORKED, IT WORKED, IT WORKED DOT ****ING COM
stop worrying and move on with your life... christ

Olipro,
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.

Penske MB said:
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Click to expand...
Click to collapse
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other

Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Olipro said:
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Click to expand...
Click to collapse

Penske MB said:
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Click to expand...
Click to collapse
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes

When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Olipro said:
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
Click to expand...
Click to collapse

Penske MB said:
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Click to expand...
Click to collapse
call it HERMIMG.nbh and it will

Hi,
It is starting now and I will post the result soon. If it works, I will definitely send you my donation!!!
Olipro said:
call it HERMIMG.nbh and it will
Click to expand...
Click to collapse

Oli
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx

Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
If you read the forum thread associated with the newest LVSH this is a known problem and several solutions have been suggested - read the post and try the suggestions.

----------

Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
thanks very much... much appreciated.
have you tried going to the today screen item in settings and manually setting a today image?

Radio Version for Samsung i780

Hi,
How is it be possible to upgrade the radio versin to another version?
My version is not able to hook up on 3G connections or SIM card.
Is there a way to upgrade it? and extract from other memeber for share?

ofird said:
Hi,
How is it be possible to upgrade the radio version to another version?
My version is not able to hook up on 3G connections or SIM card.
Is there a way to upgrade it? and extract from other member for share?
Click to expand...
Click to collapse
never mind

ofird said:
Hi,
How is it be possible to upgrade the radio versin to another version?
My version is not able to hook up on 3G connections or SIM card.
Is there a way to upgrade it? and extract from other memeber for share?
Click to expand...
Click to collapse
Yes is possible.
Download a full rom (like the italian one).
Launch the full upgrade with the phone disconnected
kill the mirage client with the task manger
You will find the rom splitted in 3 files on the C:\ directory.
Copy the _phone.bin file somewhere.
Then relaunch the mirage client and choose to flash the pone part only with the above file.
You will need the smsung generic modem drivers (the ones for the i600 or i607 are ok) to flash the phone section.

hi,
in my case i780 connect on wifi but internet explorer don't work.
It only works when i an on data provider.

Thank you for that tip Solutor,
I will give it a try now.
BTW - is the Italian ROM newer then mine?
mine is -
PDA: i780DXHA1
PHONE: i780DXGL2
And, why if so, wy don't I install the italiam ROM as a whole (not just the radio part) and then add my languages?
and ...will it affect the Radio of the GPS as well?

Amazing!
You have solved my problem!
Thank you!
I have been working on this for a week now, and finally...you came up with it
3G is working and now even the GPS is showing some "living symoptoms" ( I still have to play with it more).
Cheers

Me too i have flashed the radio and the wifi works

I can now confirm that the device works flawlessly !
GPS hooks up in a few seconds (after an initial 5 minutes for the first time) and everything works superb! no third parties (port Splitter, GPSGate, etc.) required!
Soluter - you made my day!

The Solutor said:
Yes is possible.
Download a full rom (like the italian one).
Launch the full upgrade with the phone disconnected
kill the mirage client with the task manger
You will find the rom splitted in 3 files on the C:\ directory.
Copy the _phone.bin file somewhere.
Then relaunch the mirage client and choose to flash the pone part only with the above file.
You will need the smsung generic modem drivers (the ones for the i600 or i607 are ok) to flash the phone section.
Click to expand...
Click to collapse
Ive just tried to get the _phone part from the italian newer rom but as soon as i kill the mirage service all 3 files from the c:\ drive vanish too
Do you have any ideas as to what the problem could be?
thanks

J273 said:
Ive just tried to get the _phone part from the italian newer rom but as soon as i kill the mirage service all 3 files from the c:\ drive vanish too
Do you have any ideas as to what the problem could be?
thanks
Click to expand...
Click to collapse
Kill mirage from the process tab, not from the application tab.
Another way is flashing the whole italian rom, then flashing back the english one (as the one that is lying around is the pda part only)
BTW, I'm trying to upload somewhere the splitted rom, stay tuned!

ofird said:
You have solved my problem!
Thank you!
I have been working on this for a week now, and finally...you came up with it
3G is working and now even the GPS is showing some "living symoptoms" ( I still have to play with it more).
Cheers
Click to expand...
Click to collapse
I'm glad You find this tip helpfull

The Solutor said:
Kill mirage from the process tab, not from the application tab.
Another way is flashing the whole italian rom, then flashing back the english one (as the one that is lying around is the pda part only)
BTW, I'm trying to upload somewhere the splitted rom, stay tuned!
Click to expand...
Click to collapse
Ahh thats what ive been doing wrong...
Thanks ill give that a try now.
Thanks again

As promised the splitted rom:
http://www.megaupload.com/it/?d=ARUXWRCV

Finally manged to get the phone part but when i click the detect button it just stops on
'Waiting for device...'
and dont go any further...is this due to the modem driver not being installed?
Also do i need to kill activesync before ido the update?
Thanks

The Solutor said:
As promised the splitted rom:
http://www.megaupload.com/it/?d=ARUXWRCV
Click to expand...
Click to collapse
Thanks alot

J273 said:
Finally manged to get the phone part but when i click the detect button it just stops on
'Waiting for device...'
and dont go any further...is this due to the modem driver not being installed?
Also do i need to kill activesync before ido the update?
Thanks
Click to expand...
Click to collapse
I seem to be getting the same problem - J273 did you manage to resolve? I just want to update the phone part not pda. Thanks

mic_888 said:
I seem to be getting the same problem - J273 did you manage to resolve? I just want to update the phone part not pda. Thanks
Click to expand...
Click to collapse
Yeah...I had the phone on.
Make sure the phones switched off and then connect the cable.

J273 said:
Yeah...I had the phone on.
Make sure the phones switched off and then connect the cable.
Click to expand...
Click to collapse
Thanks for your quick reply. When you say turn the phone off do you mean switch to flight mode i,e, leave the device on? I did that but still get the waiting for device....
All I did was select the _phone file and click detect. Do I need to do anything else? Do I need select anything in the Loader section?? Sorry - I'm not finding as easy as flashing my HTC Touch!

no actually switch the phone off...select the phone part of the rom and then connect the phone and it should auto start flashing

J273 said:
no actually switch the phone off...select the phone part of the rom and then connect the phone and it should auto start flashing
Click to expand...
Click to collapse
Great thanks - just flashed the phone.

i just hang on Welcom screen

i Download And update 6.5 rom directly pressing resset button and holding volume down + back key. now what happend after update success my devise hang on O2 Welcom screen
can i get it back to work plz reply me quick

I am having problems as well with it, where in the internal memory did you put the DIAMIMG.NBH file because I just put it in the first place I seen in it.holding those buttons does nothing for me.

1. HardSPL is in?
2. If you had and ROM before that has less size then try to flash your new ROM using MTTY

michal_banszel said:
1. HardSPL is in?
2. If you had and ROM before that has less size then try to flash your new ROM using MTTY
Click to expand...
Click to collapse
Hello, I have same problem, had HSPL 1.4, tried all versions from 1.23 to 1.93 as well as flashed many radio'sand roms from stock esn and wwe ones to Udk's/aztor/cloudyfa/tom codon.
Created a 0 KB "welcome.not" file on root to bypass the welcome screen and is fine but as touchscreen is not responding, I cannot do anything else with devise.
I mostly flash from device.
Any Idea anyone
Thanks in advance

jungl1st said:
Hello, I have same problem, had HSPL 1.4, tried all versions from 1.23 to 1.93 as well as flashed many radio'sand roms from stock esn and wwe ones to Udk's/aztor/cloudyfa/tom codon.
Created a 0 KB "welcome.not" file on root to bypass the welcome screen and is fine but as touchscreen is not responding, I cannot do anything else with devise.
I mostly flash from device.
Any Idea anyone
Thanks in advance
Click to expand...
Click to collapse
try the mtty as mentioned above - follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=540290
also - most of these (virtually all) are GSM, hope you're not flashing on CDMA

cloudedhopes said:
try the mtty as mentioned above - follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=540290
also - most of these (virtually all) are GSM, hope you're not flashing on CDMA
Click to expand...
Click to collapse
I'm flashing on GSM so it should be fine.
Even if I've been around for a while, I've never used mtty,so I hope it does wonders as my pc is going crazy flashing about every rom, radios or HSPL without nay improvement so far.
Many many thanks for the help and link, I'll give it a go asap.

Please help! I am desperate

oh and i used this (tayutama one because i didnt find superuser app) forum.xda-developers.com/showpost.php?p=7587405&postcount=417

it looks to me as your playlogos1 is messed up (sound but no boot animation). i guess by
i reseted my phone from the boot menu
Click to expand...
Click to collapse
you mean you did a wipe/factory reset from recovery?
if so, i guess you have to reflash with odin. you could use adb to connect to the phone from recovery and try to fix the problem manually but i guess thats no an option for you ... reflash is the fastest method to get your phone running again ...

yes, i did the factory reset. i want no longer to be wrong, so can you please give me some newbie steps to do the reflash or at least a link? thank you very much, i am no longer in panic!

messerschmidtastropuf38 said:
... so can you please give me some newbie steps to do the reflash or at least a link?
Click to expand...
Click to collapse
read flash firmware using odin. i recommend one of the jmX firmwares. the newest of them being WXJM7

thanks a lot for the help, i will never forget you. i was scared of losing the warranty and not solving this issue. if i am right, the method will work because i didnt know that you can make an entrance to the system. i checked the download mode and it works, i am now stuck with my pc until i repair it and on the firmware. 2 questions: 1. if the drivers of the sgs are installed, do i need to remove kies and reinstall it or something like that? and 2. if i did the factory reset, was the internal sd card formatted? thanks a lot again.

messerschmidtastropuf38 said:
2 questions: 1. if the drivers of the sgs are installed, do i need to remove kies and reinstall it or something like that? and 2. if i did the factory reset, was the internal sd card formatted? thanks a lot again.
Click to expand...
Click to collapse
1)Hi there. There is no need to uninstall/reinstall kies, in fact u do not have to open it to be able to use odin. You can view this video tutorial first part and second part for illustration purposes. If you are unable to connect to odin you can open kies and reinstall your drivers with it.
2) As far as I know when you do a factory reset only your system reserved partition of your internal sdcard is formatted. The rest of your data in /SDCARD will remain untouched.
Senior members pls correct me if I'm wrong.

messerschmidtastropuf38 said:
i was scared of losing the warranty and not solving this issue.
Click to expand...
Click to collapse
theoretically you WILL loose your warranty when you use odin to flash a firmware, in reality the will never find out as long as you don't brick it during flashing...if you want to be 100% on the save side (regarding the warranty) you can also flash the original firmware (JF3 for me) back. personally i would not worry about that ...
jana999 said:
Senior members pls correct me if I'm wrong.
Click to expand...
Click to collapse
no, you are in fact completely right

now that i know that this method can not fail i dont care about the warranty., what is the differences between firmwares and should i use the latest one?

messerschmidtastropuf38 said:
now that i know that this method can not fail i dont care about the warranty., what is the differences between firmwares and should i use the latest one?
Click to expand...
Click to collapse
as i wrote above i recommend a JMX one (JM6 or JM7) as they are really stable. i use JPC (android 2.2) which works well for me but there are people reporting serious problems like locked phones and overwritten IMEI's. therefore i wouldn't recommend this for unexperienced people...
i don't want to worry you but there are people who managed to brick their phones with odin. it's very very unlikely if you follow the instructions precisely. just that you know ... read the howto's carefully before proceeding!

Again..
Please DO NOT SPAM THIS FORUM! Why do you all post your questions in "ANDROID DEVELOPMENT", where there is the "Questions and Answers" forum? This way you steal space for DEV apps and useful stuffs without a reason.

m3talm0rph said:
Please DO NOT SPAM THIS FORUM! Why do you all post your questions in "ANDROID DEVELOPMENT", where there is the "Questions and Answers" forum? This way you steal space for DEV apps and useful stuffs without a reason.
Click to expand...
Click to collapse
i agree but desperate people don't care about forum-rules which is why we have so many threads like this in the dev section. i guess the only way to solve this would be if an admin/mod would manually move them

i will consider this and i understand that it has some risk, but i think this is my only chance. also, i hope the 0.05 percent chance of a major electricity fail will not ruine my phone. for clarifying: is this reflash like the windows reinstalation with different update packs? if the process will be done completely, is there a chance for the black screen will be still there? i am a little nervous, not scared as the first time, but if the process dont work, is there any chance to repair it through samsung with some costs?

messerschmidtastropuf38 said:
i will consider this and i understand that it has some risk, but i think this is my only chance. also, i hope the 0.05 percent chance of a major electricity fail will not ruine my phone. for clarifying: is this reflash like the windows reinstalation with different update packs? if the process will be done completely, is there a chance for the black screen will be still there? i am a little nervous, not scared as the first time, but if the process dont work, is there any chance to repair it through samsung with some costs?
Click to expand...
Click to collapse
Hey there buddy.
I can see that you are really concerned about messing things up. But really, don't worry. It has some down falls, but flashing with Odin is might safe. And as was earlier recommended, you can try flashing to either JM6 or JM7. Both are very stable releases. Here are a couple of links, one for the JM6 and the other for JM7. Trust me when I say this, IT WILL BE ALL RIGHT.....
JM6: http://forum.xda-developers.com/showthread.php?t=765032
JM7: http://forum.xda-developers.com/showthread.php?t=770821
This is another link to a brilliant post by Darkstriker. This is a well thought of FAQ's. It will guide you properly. Follow instructions to the letter and you will be all right.
http://forum.xda-developers.com/showthread.php?t=723596
It would also be a good idea to do a factory data reset after you are done flashing.
Take the plunge buddy. Be cool.....
Cheers....
Whoops.... Almost forgot. This is a link provided by Darkstriker in his FAQ. This is a faster website to download from. Let me give you direct links to the JM6 and the JM7 and the Odin and PIT files.
JM6
JM7
Odin And PIT File: https://www.wuala.com/Samsung Galax...Odin & Bootloader(.PIT)/Old/?key=AfzUZSU4SpKU
You will need both the files listed on the linked page (Odin and PIT File)
Plus you will also need the CSC files. Choose the correct one from the link below after finding the relevant info from the JM6 and JM7 links. If still in doubt, ask away.
CSC: https://www.wuala.com/Samsung Galax...C fo XWJM6, XFJM6 and XWJM7/?key=AfzUZSU4SpKU

it seems that i gave you something to work on. good, i will use one of these but i am not clear about the pda csc modem things. can someone tell me what i need to do at this step? i dont understand and i am thinkin about the apn settings... i hope i will get them. i dont think i longer have questions. thanks all!

messerschmidtastropuf38 said:
it seems that i gave you something to work on. good, i will use one of these but i am not clear about the pda csc modem things. can someone tell me what i need to do at this step? i dont understand and i am thinkin about the apn settings... i hope i will get them. i dont think i longer have questions. thanks all!
Click to expand...
Click to collapse
No problem. Will try and walk you through this.
After you have downloaded either of the JM6 or the JM7, and you have extracted the files, you will see the PDA and the modem files. You will also have to download the relevant CSC file that is specific to your region. Also, make sure that Odin and the PIT files have been downloaded.
Let me give you simple steps to work your way through.
1. Make sure Samsung Kies is NOT RUNNING including in the notification area.
2. Disconnect your phone and switch it off.
3. Start Odin
4. Make sure the three options, "Re-Partition", "Auto Reboot" and "F. Reset Time" are TICKED
5. Click on the "PIT" button and select the "s1_odin_20100512" file you downloaded.
6. Put your phone into download mode by using the key combination: POWER DOWN + HOME KEY + POWER KEY. When you see the yellow triangle, release all buttons.
7. Connect your phone and wait for the drivers to get installed.
8. Click on the "Start" button and wait for the process to finish. This will be indicated by the words "PASS" with a green background. DO NOT DISCONNECT THE PHONE TILL YOU SEE THE WORDS "PASS"
9. Remove the battery and put the phone into download mode again. (Step 6)
10. In Odin, click the "Reset" button and UNCHECK the "Re-Partition" option and keep the remaining two options CHECKED.
11. Click the "PDA" button and select the file starting with "CODE"
12. Click the "PHONE" button and select the file starting with "MODEM"
13. Click the "CSC" button and select the CSC file which you have chosen. (NOTE: You will have to extract the file from the CSC package you have downloaded and not the actual archive)
14. Connect the phone
15. Click on the "START" button and wait till Odin finishes its process. Again, DO NOT DISCONNECT THE PHONE TILL ODIN DISPLAYS THE "PASS" MESSAGE!!!!
16. If you are using Multi CSC, follow the instructions from any of the posts for JM6 and JM7: "When using *Multi CSC* you need to type *#272*????# after the flash (in dialer). ???? being the current time displayed by phone. For example if the time is currently 6.25pm you need to type *#272*0625#. Then select the desired CSC version from the list and press "Install"."
You should be fine once these steps are done. They might seem very difficult at first glance, but they really aren't. If you still feel concerned about the process, I would suggest reading the entire post again just to familiarize yourself with the process. I was trembling the first time I did this and it turned out perfectly all right in the end. I am sure it will be the same for you.
Cheers....

thanks for the flashing guide for dummies. I think that it is the most complete guide for noobs. thanks again, i will tell you when i am done but now the computer annoys me so i need to wait...

messerschmidtastropuf38 said:
thanks for the flashing guide for dummies. I think that it is the most complete guide for noobs. thanks again, i will tell you when i am done but now the computer annoys me so i need to wait...
Click to expand...
Click to collapse
Hey, someone helped me out once too eh??
Dont worry. Get comfortable with the process and you will be good to go. Its nighty night for me unfortunately. But I am sure you wont need me any further on this now.
take your time doing it, and you will do it right.
Cheers....

Hello again community. I am writing now from my SGS. Wonder how? (I did not the reflash) I don't know, the phone just booted up this morning. I have no idea how but now I will try to not reboot my phone. I think the logo is broken and the factory reset worked.
I still have the MCR app, but the Quadrant scores around 870, so I am no longer rooted.
Thanks all, I surely will need your help sometime... I consider the rooting now not so scary because I understanded that I can not break my phone completely. I will update to Froyo when it will be official and I hope the problem is not any longer in my phone.
Cheers!
Edit: I found a folder in the internal sdcard named ase that has 2 subfolders. In «resources» folder there are 2 files: playlogos1 which is 0 kilos large and userinit.sh, also with 0 kilos. If I am right this is the reason which stopped my phone to boot. What to do with them?

m3talm0rph said:
Please DO NOT SPAM THIS FORUM! Why do you all post your questions in "ANDROID DEVELOPMENT", where there is the "Questions and Answers" forum? This way you steal space for DEV apps and useful stuffs without a reason.
Click to expand...
Click to collapse
Relax bro.. You'll live longer

So I am finally in front of my PC, but I don't know if when I will reboot my phone it will work. I have the superuser/MCR and the scripts still in my phone and I don't know what to do. I don't really understand why the playlogo1 and userinit.sh files have 0 kB and they are on my sdcard. I think they have something to do with this.That's why I am afraid of rebooting it... but sometime I will need it and I hope I will not have the problem. Also, if I will reflash my phone with JM6 or JM7, which lag fix do you recommend for me? (The phone sometimes really annoys me)
Thanks in advance...!