Related
Recently installed new HTC WM6 Rom and all is sweetness and light......except.......When I accept an incoming call on the Bluetooth Motorola HF850, the first 6 -8 seconds are handled by the Orbit and then the bluetooth kicks in - trouble is the caller has hung up by then!
Tried deleting pairing and reinstalling....anyone with ideas?? Thanks.
Hi all,
I am facing the same problem with my Motorola car kit. Very annoying. I can receive calls and after 6-8 secs they can hear me, but I can not make a call, only mutes sound on both the headset and car kit. I have to select "Turn Off Handsfree" to get it to work... HELPPLEASEE!!!!!
Same exact problem here with Hermes - any ideas anybody?
The solution...
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
I have a partial solution:
I answer the phone on the PDA unit, not on the BT unit, and then I click the blue button on the BT car kit and the phone immidiately connects.
This connects much faster than the usual 10 seconds wait if you answer with your Car Kit button.
TangerineTractor said:
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
Click to expand...
Click to collapse
Hi, this is my first post. I've the same problem with my vario ii (T-mobile) recently upgraded to WM6. Installed the program from jetware and the same problem still persists. Funny enough, it did fix the problem with voice speed dialer.
I've been talking to motorola about their hf850 and they don't have a clue. I used and old MDA Compact II with WM5 and that worked fine with the car kit. I downgraded to WM5 on my Vario II and since this morning my HF850 carkit has been woking as I would expect it to. I definitely think that the problem is with bluetooth on WM6.
I have the same problem with my HTC Tornado (Cingular 2125) with WM6.
Same problem here with Trinity & WM6 - maybe this is a Microsoft/Bluetooth stack problem... any other ideas?
After upgrade to the official HTC WM6 ROM (spanish version) my integrated bluetooth hansdfree CAR-KIT doesn't work anymore (with WM5 the system works perfectly).
The car is a new CITROËN C4 Picasso, but i think this problem must involve any new PSA Group Car (CITROËN, PEUGEOT...) that mount the same kit.
I can pair the CITROËN hansfree with the TyTN, and both connects (i can see the operator name, the battery level, and the signal level, that WM5 stack doesn't show) but when i try to call, or i receive a call, there is no sound throw the hansfree system.
I also have tried the Jetware bt extension with no succes.
At now i had to downgrade to WM5 because this problem (i need the handsfree working).
The cuestion is...
Is it possible for a ROM MASTER to extract a previous bluetooth working TyTN stack to overwrite the stack that comes with official WM6?... (the WM5 or any working WM6 working stack).
Thanks
The same problem here with the same car; also the Artemis on WM6 (I tried several roms) has no sound.
Downgraded to WM5, and it's all working again.
Not yet tried to get an update for the car; maybe there is also a solution.
I have the same problem with Motorola HF-850 car kit. I'm about to downgrade too. This sux.
Same issue here with Nissan Sentra 2008.
I can dial and receive calls but the audio works about 30% or the time. It is hit or miss.
Same here in a 2007 UK CITROËN C4 (5 door hatchback) with factory fitted Bluetooth car kit, using an Orange M3100 with the Schap's WM6 Pro 3.60a ROM. Looks like I'm going back to the Orange WM5 ROM as this is a deal breaker for me. Very disappointing.
try this
I had similair problems a few pretty good solutions:
-jetware search google i use this one
-Solution:2
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone
see this thread
http://forum.xda-developers.com/showthread.php?t=290871
Thanks!
I tried the Jetware solution: no luck.
I also tried the COD trick: very strange result, I was able to make just 1 (one) call and other calls were again not possible (no sound).
Maybe there is a solution in updating the software of the handsfree set in the car. I will ask my Citroen agent to do this, if possible.
I will post the results.
I haven't tried the COD trick, but I don't think this will work. It's not a case of my car 'ignoring' my M3100... it pairs OK, and the car's display shows an incoming call, allows me to pick it up, etc, but no sound comes out of the speakers and the other party doesn't hear my voice. It's like the car is receiving the data stream to tell it what's happening on the call, but not the sound.
I don't have any of these problems with WM5, I don't even need to use the JetWare solution.
same problem with Peugeot 407
Same problem here with Peugeot 407
What I found is that if I start a call without Bluetooth and start Bluetooth during the caal, the sound works perfectly. Every next call has the same problem as before though.
TyTN; WM6 Schap's 3.60a;Radio 1.47.00.10
Hi.
I am with Motorola's HF-850 car kit and I get the sound only after 8-10 full seconds from answering. It is so sad that I have to say "wait....wait" every time I answer a call....
There is a post on this forum that suggests someones got it working with an Audi and the latest Black beta rom...
http://www.4winmobile.com/forums/hermes-black-rom-support/11291-black-x-beta-2-smash-trash-11.html
Anyone tried this?
This post also suggests that the newest Black roms may have fixed the issue
http://htc-devs.com/forum/index.php?topic=42.msg321;topicseen
Here's hoping!
That will not work on the Artemis
But I tried several WM6 roms, including the Black & Blue 4.1: no luck.
Looks like a real WM6 issue, as it's happening with several phone models.
UPDATE: No software update for the factory Citroen bluetooth handsfree according to the local dealer; so that's no solution
I have tried 5 of the latest roms yesterday including all the fixed mentioned in this forum. The best I got was with Sleuth rom where I get audio about 50% of the time. Answering with that rom results in a 5 seconds delay before audio connects causing me to yell "wait, wait, I am here ... "
I even tried a blootooth stack from Broadcomm but the result was not better.
Out of desperation as I bought this car specially for its built in bluetooth kit, I downgraded to Cingular Mobile 5 Rom version (2.15.502.3)
I am surprised and kind of thrilled to report that my 8525 and the car kit are working perfectly together and reliably.
There must be either a bug or a setting/configuration issue on the Mobile 6 bluetooth stack that caused this issue. I am unfortunately back to mobile 5 for the time being until this issue is resolved.
SPV m3100, CK3100 AND WM6
I have an Orange SPV M3100 in Spain with WM6 and i have the same problem. With WM5 and Jetware estension, i had to pair parrot and pda manually every time i got into my car, because they did not connect automatically (Blueetoth-->Devices-->Parrot CK3100-->FreeHand-->OK), but then it works well and i could receive and make phone calls.
But since I upgrade to WM6 i have to pair it manuaaly too, they connect, but it only works from time to time; most times, if i make a call it dials but i cannot speak and people does not hear me; if there is an incoming call, I see the number in the displsy but i can receive it.
Anybody with WM6 and Parrot Ck3100 works well?
I have the same problem with a Mio C520 SatNav. Its bluetooth handsfree works fine with WM5 but not WM6.
I also posted this on a thread on bluetooth headsets, http://forum.xda-developers.com/showthread.php?t=301636&page=6
I tried many different versions. So far with Sleuth's WM6, I had sound around 50% of the time. Similar to one of the previous posters.
Until there is a fix I will have to go back to WM5
I use a parrot car kit and it works fine. However, I noticed some new functionality on my lcd, like displaying battery and signal levels which was not available with the original WM5. That was available only with specific phones. Based on that I believe that a firmware update of your car kit could solve the problem. The issue is whether this is provided for you and if you will have to pay. Parrot offers them for free and you can upgrade via BT.
I'm currently running BEPE's wm6 flash on my trinity and when i recive a call it answers in the phone rather then the car kit? I can't find a way to change this? Can anyone point me in the right direction?
where do you pickup your call, on the phone or on the carkit?
I use a sony bt2500 and answering the call on the phone will not redirect the sound to the radio/carkit. Answering the call on the radio will.......
i have the same problem
i use parrot car kit
unfortunitly when i pair both , the htc doesn't recognize that the parrot is a car kit , rather only as a bluetooth device
ronski said:
where do you pickup your call, on the phone or on the carkit?
I use a sony bt2500 and answering the call on the phone will not redirect the sound to the radio/carkit. Answering the call on the radio will.......
Click to expand...
Click to collapse
I have done both no difference. Is thier a fix?
I have the Lasagna 3.0 KE and a Motorola HF850 Car Kit. I have the same issue, I tryed to answer in many ways (phone, CK, ) but no way...it always answer in the phone, after 20 secs the communication is transferred to the car-kit..
I installed all the possible software (incl. jetware) but nothing....
fl3nd3r said:
I have the Lasagna 3.0 KE and a Motorola HF850 Car Kit. I have the same issue, I tryed to answer in many ways (phone, CK, ) but no way...it always answer in the phone, after 20 secs the communication is transferred to the car-kit..
I installed all the possible software (incl. jetware) but nothing....
Click to expand...
Click to collapse
Same car kit same issues.... Worked well with the wm5 rom but not wm6
rackxp said:
Same car kit same issues.... Worked well with the wm5 rom but not wm6
Click to expand...
Click to collapse
Perhaps contacting Motorola Customer Service...
I don't know if this is useful information but the official D810 WM6 ROM works well with the factory bluetooth car kit in BMWs. In fact the radio shows telephone signal strength which WM5 didn't do.
no luck maybe time for a new car kit
Hi all,
I just bought the Parrot minikit Hands Free car kit.
I am facing allot of problems with this device:
1. The main one is that when I am issuing a call from the TOUCH, the sound remains in the TOUCH and is not routed to the car kit.
2. When someone calls me most of the times I can answer the call and it works fine, but sometimes the phone rings and the car kit not.
I read in the trinity accessories forums that people faced the same problems with other Parrot car kits when they upgraded their roms to WM6.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Did anyone faced problems with the Parrot Mnikit or any other Parrot car kit with the Touch?
Thanks,
Carmi
Carkit problem
Hi,
I have a similar problem. I have my HTC touch paired with a Nokia Bluetooth carkit. I get incomming calls over the speaker but when I answer the call I first have to go to the menu and select "enable handsfree calling".
I can make outgoing calls directly via the carkit whitout selecting an option in the menu. Furthermore the volume is very low compared to my prvious PD (MDA Vario).
Has anyone a fix for this?
Gus
I have The same problem
I have an HTC Touch with a Parrot CK3100 freehand car Kit and have the same problem.
Often, when I receive a call the car kit show the call in display but when I pick up the CK shows an icon (like a musical note) and the audio is not transferred.
When I call from the HTC, some times works fine and some times no.
A partner of my company with the same car kit and a HTC Touch dual, has the same problem too.
With WM5 works fine (I test it with HP6515).
did you set the "services to use from this device" to "Hands Free" ?
This is a known issue with Parrot devices and WM6. I've had the same problem with a couple of different HTC WM6 devices. The problem is specifically related to Parrot, not WM6 in general. I've used the Tytn II with Motorola and BlueAnt BT devices without any problems. I upgraded my minikit from v1.02 software to v1.03, but that hasnt fixed the symptoms which we are all complaining of.
ARE YOU LISTENING PARROT?! Ive had the minikit for 6 months and I'm getting tired of waiting for a version of software that will fix all our problems.
I have the exact same issue with my Parrot 3200. I'm also waiting for a solution from Parrot!
Parrot MINIKIT and Touch problems
I've similar problem.
paired the two devices, sometimes I can start a call from my Touch and the sound is on the MINIKIT speaker, but most of the times the is still on the phone and I have to press the green button to switch the call on the parrot speaker.
I've upgraded the firmware from 1.02 to 1.03.
Another information: I've tested the MINIKIT with my blackberry 8100 and works perfectly, when paired and connected every calls is routed to the parrot speaker, so I think It's an issue between the parrot and WM6.
Any news?
thank you
Besides my Touch I also use my BlackBerry 8800 and that also works fine. With htc it's not working as it should be.
HTC Touch Parrot mk6100 PROBLEM!
With the Parrot mk6100 I have all the problems possible.
This Parrot is supposed to play properly the mp3 files that I have in the touch, but everything is a dissaster. Very long to write. The thouch gets hunged every time.
The worst problem is that the Parrot can't read the contacts in the Touch.
I have spoken with Parrot and Htc here in Spain and both say that the problem is Windows mobile 6.
I don't know what to do...
ive got the dual w mk6100
after having a lot of issues i found out i had to pair it both ways and the mk6100 got to say "bye". then everything worked fine. well almost. but pretty good indeed.
i posted in niki accesories.
it takes time to sync the contacts, true, but it finally does.
as far as i know, touch and touch dual is not that different , except for the mhz.
let me know what you think
Touch cruise and Parrot Minikit
I have the similar problems too. Sometimes the sound cannot be routed to the car kit. There is no way to understand the reason why one time it works fine and another time it cannot move the sound via blue tooth. Sometimes pressing the green button of the parrot minikit is possible to move the sound to the car kit, sometimes it doesn't help - the sounds remains in the HTC. I tested the Parrot minikit paired with Nokia E70 - I haven't seen any problems. Also I have tested the HTC paired with another blue tooth car kit - BHF-200 and all was OK.
I wonder ... if someone knows ... if the WM6.1 (by Bepe) will fix the problem!
Thanks in advance !
Parrot Minikit just tested with QTEK 900, WM6.1-Ranju
The Parrot minikit was tested with my other PPC - QTEK 9000 (HTC Universal) and I didn't see any problems. The QTEK works under WM6.1 (Ranju pack).
So I really wonder ... to upload WM6.1 to my HTC touch cruise ...
Any comments and opinions are welcome.
Thanks in advance !
p.p. My HTC touch cruise is still with its original WM6.0 ...
Bluetooth Hotfixes
Has any of you guys or girls tried any of the "Bluetooth Hotfixes", that are available for HTC branded devices on the HTC e-Club site.
It seems to fix dropped calls and connection probs. (and it seems to work)
The hotfix is available for several HTC devices.
You just have to register your HTC branded phone to get to the download portion of the site for your model, and see if it's available.
It's definitely there for the Elf, Tytn II and S710 (i'm not sure if it's there for the Touch cruise)
Just wondering if you guys can help
My touch Pro 2
Vodafone UK
ROM - 1.14.161.6 (50207)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
links to the 2009 BMW 5 series iDrive and reads the phone book I can make calls fine but if I pick up an in coming call using the iDrive controller it makes the connection but there is no sound either way.
If I press the phone answer button on an incoming call then it works perfectly.
It does not do this all the time but its more like 90% can't hear and 10% works fine.
I contacted HTC who said that the phone matches the bluetooth profiles and it should be fine BMW have not got back to me yet (4 weeks so far)
this also happens to some one else I work with and his touch pro 2 on his 2005 BMW with the older iDrive and built in BMW Phoneprep.
another guy with an Audi has no issues at all. I also contacted Bury who make the Uni-System 8 car kits about when they were going to do a cradle for the TP2 and I was informed that they were not planning it at present, I asked why and they said "HTC's bluetooth was flakey"
I put the hard SPL on the phone and upped it to the latest HTC build
ROM - 1.19.707.2 (51489)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
but have put it back to the Warranty status as it did not make any difference
Any help appreciated
I know Parrto is a different BT HFBTP but I had all kinds of flakey problems until I updated to the latest Radio in the TP2 and upgraded to the latest firmware for the Parrot CK3100 Car Unit.
Try an update to your iDrive system.
More car kit problems
I'm really disappointed by the bluetooth in the TP2. Having just upgraded from a Snap which worked perfectly with all my attachments, the TP2 is a disaster with the car kit in my (new) Volvo. (A bit like the BMW story at the head of the thread.) Won't connect to my TomTom sat nav. Almost works with my Parrot (upgraded as recommended above). Not what you expect from a 'top of the range' piece of kit from htc. I hope there will be a patch for the BT stack. In the meantime I have to revert to my Snap for car journeys. Bizarre.
This happened to me:
If I don´t set up a data connection to my carrier, the link to my bluetooth car kit works perfectly, meaning that I can answer calls and hang up using the button on the steering wheel.
Once I set up a data connection, I can only answer and hangup using the buttons on the telephone. In any case I can listen and talk using the car kit.
TP2
The same issue here. My TP2 won't connect properly to my Volvo V70 2009 BT Car kit. It is connecting and synchronizing but then it won't make call's. (sometimes it suddenly does work). My phone is getting really slow. And somethine the connection fall's away during a conversation. Even when i shut down all data connections on my phone it behaves as mentioned here above. HTC and Volvo just point at each other and a solution seems far away. Yes. I did the firmware upgrades on both sides. At this time i would not recommend the HTC TP2 as a business phone. My collegues have similar issues with other car brands.
Volvo V70 2009 - Firmware November 2009
HTC Touch pro 2 - WM 6.5 UK (and a dutch vodafone office account)
Anyone with a solution? Suggestions? thnx.
My TP2 (unbranded) was working fine until I updated it to WM6.5 (an official release). Now, there are no issues when it gets paired with my son's Mitsubishi Lancer but it refuses to work correctly with my Audi A4. It picks a call but stays silent until charger is connected. Disconnecting of charger "fixes" the situation so I start hearing a call.
Bluetooth wasn't working for me either. Pairing went fine, answering worked, but no sound at all... I followed instructions on this page: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html and now everything works as expected. I'm driving a Renault Espace with a built-in stereo/gps/carkit.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.