Develop Bugs

HTC P3300 and PARROT CK-3100

I use the Bluetooth connection between the HTC and the Parrot and it works just fine in my car…. As far as the phone hand-free functions are concerned.
When I installed TomTom (ver. 6) on the HTC I assumed that the voice of the navigator would also come out through the car speakers connected to the Parrot.
This is not happening! The phone conversations are going through the Parrot and INDEPENDENTLY the TomTom voice comes out of the HTC!
This creates quite a mess when I am driving (while TomTom navigates) and I get a phone call: TomTom keeps on talking over the phone conversation and most of the HTC screen is covered by the “incoming phone call” notification!
Moreover the ringtone of the HTC does not seem to work when connected to the Parrot and only a very feeble chime is there to signal an incoming call.
Does anyone have a solution to fix this inconvenient situation?
Thanks in advance for the insight!

I've got the same setup as you and have the TomTom voices coming out of the phone which has been the same with my previous phones such as the SPV C550 and he HTC wizard. I think it's down to the bluetooth stack implementation on the Windows Mobile phone. My mobile mutes TomTom when I am in a call and I get a flashing mute icon shown on the TomTom screen.
One thing to try is the Jetware bluetooth extension http://www.jetwaremobile.com/ which is designed to improve compatability with the Parrot systems. It will certainly help you get the correct ringtones through the speakers, though I'm not sure if it will help with TomTom voices.
Neil

Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz

Thanks guys
Sorry I have been so busy lately I barely logged in the Forum. Just wanted to let you know that I have seen your replies and will look into the solutions you suggested. THANKS.. will get back to you soon with (hopefully positive)feedback

Vaguely related and possibly usefull information here:
http://www.modaco.com/Guide-to-usin...oneer-Bluetooth-Car-Stereoand39s-t252613.html

hotatomic said:
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Click to expand...
Click to collapse
Thanks hotatomic! I have installed that appz and it works!!! Great tip!
Any other useful tools for the P3300 we could exchange?
Cheers!
SiperX

Motorola HF850 Bluetooth Cat Kit problem

Recently installed new HTC WM6 Rom and all is sweetness and light......except.......When I accept an incoming call on the Bluetooth Motorola HF850, the first 6 -8 seconds are handled by the Orbit and then the bluetooth kicks in - trouble is the caller has hung up by then!
Tried deleting pairing and reinstalling....anyone with ideas?? Thanks.

Hi all,
I am facing the same problem with my Motorola car kit. Very annoying. I can receive calls and after 6-8 secs they can hear me, but I can not make a call, only mutes sound on both the headset and car kit. I have to select "Turn Off Handsfree" to get it to work... HELPPLEASEE!!!!!

Same exact problem here with Hermes - any ideas anybody?

The solution...
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...

I have a partial solution:
I answer the phone on the PDA unit, not on the BT unit, and then I click the blue button on the BT car kit and the phone immidiately connects.
This connects much faster than the usual 10 seconds wait if you answer with your Car Kit button.

TangerineTractor said:
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
Click to expand...
Click to collapse
Hi, this is my first post. I've the same problem with my vario ii (T-mobile) recently upgraded to WM6. Installed the program from jetware and the same problem still persists. Funny enough, it did fix the problem with voice speed dialer.

I've been talking to motorola about their hf850 and they don't have a clue. I used and old MDA Compact II with WM5 and that worked fine with the car kit. I downgraded to WM5 on my Vario II and since this morning my HF850 carkit has been woking as I would expect it to. I definitely think that the problem is with bluetooth on WM6.

I have the same problem with my HTC Tornado (Cingular 2125) with WM6.

Same problem here with Trinity & WM6 - maybe this is a Microsoft/Bluetooth stack problem... any other ideas?

HTC WM6 - Car Kit Bluetooth Problem (no sound at all)

After upgrade to the official HTC WM6 ROM (spanish version) my integrated bluetooth hansdfree CAR-KIT doesn't work anymore (with WM5 the system works perfectly).
The car is a new CITROËN C4 Picasso, but i think this problem must involve any new PSA Group Car (CITROËN, PEUGEOT...) that mount the same kit.
I can pair the CITROËN hansfree with the TyTN, and both connects (i can see the operator name, the battery level, and the signal level, that WM5 stack doesn't show) but when i try to call, or i receive a call, there is no sound throw the hansfree system.
I also have tried the Jetware bt extension with no succes.
At now i had to downgrade to WM5 because this problem (i need the handsfree working).
The cuestion is...
Is it possible for a ROM MASTER to extract a previous bluetooth working TyTN stack to overwrite the stack that comes with official WM6?... (the WM5 or any working WM6 working stack).
Thanks

The same problem here with the same car; also the Artemis on WM6 (I tried several roms) has no sound.
Downgraded to WM5, and it's all working again.
Not yet tried to get an update for the car; maybe there is also a solution.

I have the same problem with Motorola HF-850 car kit. I'm about to downgrade too. This sux.

Same issue here with Nissan Sentra 2008.
I can dial and receive calls but the audio works about 30% or the time. It is hit or miss.

Same here in a 2007 UK CITROËN C4 (5 door hatchback) with factory fitted Bluetooth car kit, using an Orange M3100 with the Schap's WM6 Pro 3.60a ROM. Looks like I'm going back to the Orange WM5 ROM as this is a deal breaker for me. Very disappointing.

try this
I had similair problems a few pretty good solutions:
-jetware search google i use this one
-Solution:2
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone
see this thread
http://forum.xda-developers.com/showthread.php?t=290871

Thanks!
I tried the Jetware solution: no luck.
I also tried the COD trick: very strange result, I was able to make just 1 (one) call and other calls were again not possible (no sound).
Maybe there is a solution in updating the software of the handsfree set in the car. I will ask my Citroen agent to do this, if possible.
I will post the results.

I haven't tried the COD trick, but I don't think this will work. It's not a case of my car 'ignoring' my M3100... it pairs OK, and the car's display shows an incoming call, allows me to pick it up, etc, but no sound comes out of the speakers and the other party doesn't hear my voice. It's like the car is receiving the data stream to tell it what's happening on the call, but not the sound.
I don't have any of these problems with WM5, I don't even need to use the JetWare solution.

same problem with Peugeot 407
Same problem here with Peugeot 407
What I found is that if I start a call without Bluetooth and start Bluetooth during the caal, the sound works perfectly. Every next call has the same problem as before though.
TyTN; WM6 Schap's 3.60a;Radio 1.47.00.10

Hi.
I am with Motorola's HF-850 car kit and I get the sound only after 8-10 full seconds from answering. It is so sad that I have to say "wait....wait" every time I answer a call....

There is a post on this forum that suggests someones got it working with an Audi and the latest Black beta rom...
http://www.4winmobile.com/forums/hermes-black-rom-support/11291-black-x-beta-2-smash-trash-11.html
Anyone tried this?
This post also suggests that the newest Black roms may have fixed the issue
http://htc-devs.com/forum/index.php?topic=42.msg321;topicseen
Here's hoping!

That will not work on the Artemis
But I tried several WM6 roms, including the Black & Blue 4.1: no luck.
Looks like a real WM6 issue, as it's happening with several phone models.
UPDATE: No software update for the factory Citroen bluetooth handsfree according to the local dealer; so that's no solution

I have tried 5 of the latest roms yesterday including all the fixed mentioned in this forum. The best I got was with Sleuth rom where I get audio about 50% of the time. Answering with that rom results in a 5 seconds delay before audio connects causing me to yell "wait, wait, I am here ... "
I even tried a blootooth stack from Broadcomm but the result was not better.
Out of desperation as I bought this car specially for its built in bluetooth kit, I downgraded to Cingular Mobile 5 Rom version (2.15.502.3)
I am surprised and kind of thrilled to report that my 8525 and the car kit are working perfectly together and reliably.
There must be either a bug or a setting/configuration issue on the Mobile 6 bluetooth stack that caused this issue. I am unfortunately back to mobile 5 for the time being until this issue is resolved.

SPV m3100, CK3100 AND WM6
I have an Orange SPV M3100 in Spain with WM6 and i have the same problem. With WM5 and Jetware estension, i had to pair parrot and pda manually every time i got into my car, because they did not connect automatically (Blueetoth-->Devices-->Parrot CK3100-->FreeHand-->OK), but then it works well and i could receive and make phone calls.
But since I upgrade to WM6 i have to pair it manuaaly too, they connect, but it only works from time to time; most times, if i make a call it dials but i cannot speak and people does not hear me; if there is an incoming call, I see the number in the displsy but i can receive it.
Anybody with WM6 and Parrot Ck3100 works well?

I have the same problem with a Mio C520 SatNav. Its bluetooth handsfree works fine with WM5 but not WM6.
I also posted this on a thread on bluetooth headsets, http://forum.xda-developers.com/showthread.php?t=301636&page=6
I tried many different versions. So far with Sleuth's WM6, I had sound around 50% of the time. Similar to one of the previous posters.
Until there is a fix I will have to go back to WM5

I use a parrot car kit and it works fine. However, I noticed some new functionality on my lcd, like displaying battery and signal levels which was not available with the original WM5. That was available only with specific phones. Based on that I believe that a firmware update of your car kit could solve the problem. The issue is whether this is provided for you and if you will have to pay. Parrot offers them for free and you can upgrade via BT.

Different Bluetooth Stack?

I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!

Try this
Had similar in a BMW...
Try www.jetwaremobile.com

Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.

Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !

RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?

TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.

I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?

My Orbit works fine with my Nokia CK-7W using a B&B ROM.

Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?

No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.

Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.

Bluetooth carkitt no longer working after upgrade to WM6

A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene

renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
Click to expand...
Click to collapse
Same problem here... when upgrade to WM6 official the sound in the car is gone when dailing. Phone is connected but I'am unable to hear anything... everything goes into mute...

I'm stuck with the very same problem. I'll try JetWare and change some configs, but I fear it will not work.
If I have any news I'll post them.
Regards
P.D My car is a Citroen C4, and original Citroen bluetooth I think is a Parrot 3000 or 3100

I have the same problem.
Car kit BT Peugeot 207 and HTC 3300 with cooked room wm6.
I've installed jetware extension. I can hear sound in the first call but when I hang up the next call, the same problem .. no soud.

renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
e problem.
Please help.
Rene
Click to expand...
Click to collapse
Has anyone found a solution for this? I have found deactivating the bluetooth and reactivating on the call works.
I would hope someone finds a solution. What would be the downside of going back to WM5?? I cannot remember why I upgraded now.....

I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards

Alvinillo said:
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Click to expand...
Click to collapse
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5

azreal1983 said:
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
Click to expand...
Click to collapse
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards

Alvinillo said:
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Click to expand...
Click to collapse
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?

azreal1983 said:
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
Click to expand...
Click to collapse
Nice!
But I find a problem, isn't your O2-XDA also known as Wallaby? I mean, if I'm right you are posting in the wrong forum or at least you should be advised not to install another PDA ROM on yours becouse you risk to brick it. We are posting at Artemis forum. Of course, Bluetooth problem seems not related to PDAs but WM6
On this forum there is info about how to unlock your PDA. Unfortunately I dont find any ROM for your device.
Regards

Same Problem
hi all,
207 FACTORY KIT / M650
I have the same problem, only the original ROM under WM5 work properly...
I Tried many bluetooth soft on several tips and WM6 release...
AJE , 1.5 / 6 /8 / 9 / 2.0 beta........
Now i am under B&B 5 (WM6.1) and the problem persist
I note that if i desactivate bluetooth stereo and fix sample rate to 44Khz, it looks to work a little better than before.
If i wait between 2 phone call (out), it works much.
If i answer to a phone call with the remote control it never works.
If i answer with green touch on the phone it work ALL the time.
Are we condamned to stay under WM5 !??
WM5 -> bluetooth but no CRM (does'n't want to work)
WM6 -> No bluetooth but CRM...
I choose to work on this but any result, since more than eight month...
HEEEEEEEEEEELLLP US AND SHAME ON PA**OT
PS: HTC and parrot pass a deal to increase compatibility of their product...
Since this time does anybody tel to parrot on this problem ?
Does newer HTC product originaly under WM6 work fine one factory kit (peugeot/citröen 207/C3...) because if no, i think parrot sucks ! they update firmware on all their product, but for product sells to peugeot or citroen -> NOTHING

Thx for the info. It's a pity that the problem persist on WM6.1
We are hooked to WM5 and to my eyes, the Artemis and PocketPCs look older than ever.
At the end, I think it is a Microsoft problem. PSA Bluetooth CarKit works flawlessly with WM5 so Microsoft changed something to the Bluetooth stack on WM6. Shame on them.
I'll wait to WM7, but I don't have too much expectations.
Regards

Some hotfixes are available from HTC regarding bluetooh, only not for the Hermes. damm.
Anyone tried one of these already? Currently still not able to updrade to WM6.1
http://forum.xda-developers.com/showthread.php?t=385128
And one recently for the Diamond..:
6/16/2008
Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
If you are using the Bluetooth headset, “Jabra JX10”, “Jabra BT500” or “Samsung WEP 150”, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.