Hi,
I have my O2 mini flash to big storage, I have dum the BigStorage ROM into the SD card, but when i do the last thing to flash the ROM into my O2mini in the boot mode, it come up a message:
SD Download
==========
Sections = 1
Not allow
update!
How can I flash the ROM into my O2mini using the SD card ?
Or how can I flash the ROM using USB cable?
Many Thanks
Related
Does anybody know if I can upgrade my HTC Wizard ROM to WM6 using my SD card? My USB port was broken and I am unable to connect USB to ActiveSync. I have seen a thread to do that using XDATools but I could not do it. Would you please help me to do flash my ROM using SD Card? Thanks.
Well its possible to backup the present rom onto a sdcard and in times of need can be re flashed back to the phone again,but to flash altogether a new rom on a sdcard and flash to the phone is not possible.
There's,however, a slight chance,if you can get hold of a phone similar to your with same specifications (make & model) and it has wm6 installed on it,make an sdcard backup of that rom and insert the card in your phone and try to flash,it might work.Just a brainwave
Hi,
Tried this rom, but file size mismatch (rom is only 41MB).
Read somewhere you have to flash this from SD card.
But : now almost everyone works with SDHC cards, and for all the roms that we flash, we have to pull out the SDHC card or flashing does not work.
Any other methods to flash this rom without card in it ?
Thanks,
Innovator
I've been asking the same question, but nobody answered.
I wish I could have this mini ROM.
Would appreciate all helps.
No other possibility....
... as far as I know. Either via activesync or via a non-sdhc card. Don't you have a "forgotten" sd-card in another phone?
Even the smallest card (from 64 mb or more) will do.
Good luck!
HJ
it gives " invalid certificate" error while trying to flash from SD card
any solutions to this prob..
much appreciated.
I flash this ROM using 2GB SD Card.
Your Device it should be Hard SPL first.
I flash this ROM using an old 2GB SD Card. Took few minutes and its done.
OK. Have a Dell X51V. Tyring to download some of the updated ROMs. I've downloaded a couple ROMs but can't seem to load them. Not sure what I'm doing wrong. This ois what I'm doing:
Download ROM
Unzip to folder
format 512 MB SD card (fat32)
copy zip contents (.nb0 and .crc) to root of SD card
insert SD card into PDA
wireless button + power button + reset
I see the ROM loader screen (SD Image Update A10_G4) but I do not see a list of available ROMs to pick from so I can't load any of them...
Anyone have an idea?
| have exactly the same problem. Can anyone help please?
Sounds like you're doing everything correctly. All I can suggest is to try using another SD Card (but stay away from SDHC - they won't work).
Hi all,
Is it possible to flash a device from SD Card ?
How to proceed ?
Can I save RUU and .NBF files on SD card and after start the device, run the RUU ?
My device is not USB connecting (Suyncronize and battery charge) after flashed a WM 6.5 ROM, so no comunication with PC, then I thought flash another ROM from SD Card, once device is running.
Tks,
Cássio
some devices support it
click XDA-Wiki on the titlebar
and find your device and look what and how or if it's don on the device you own
So I tried to root my Samsung Galaxy S3 by using Odin v3.07 but I think I installed a bad pda and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I've tried everything but they keep failing I don't know what to do. My phone is SGH-I747 4.4.2.
Since your phone was running 4.4.2, do not attempt to flash any ROMs using that attempt to downgrade your bootloader to anything prior to 4.4.2.
Try this to get your phone up and running:
download the latest CM11 for the d2lte and save it to an external SD card: https://download.cyanogenmod.org/?device=d2lte
dowload the latest tar.md5 version of Philz Touch for the d2lte from here: https://goo.im/devs/philz_touch/CWM_...Edition/d2lte/
boot phone in download mode, open Odin 3.07, do not check anything except f.reset.time, flash Philz via PDA box, remove USB cable when you see the word Reset appear in the status window, remove battery, replace battery, boot into recovery, format system, Dalvik, data, and cache, flash cm11, and reboot.
How do you save it into an external sd card??
Put the microSD card into a card reader and copy the ROM to the microSD card. Make sure the microSD card is formatted using FAT32.
audit13 said:
Put the microSD card into a card reader and copy the ROM to the microSD card. Make sure the microSD card is formatted using FAT32.
Click to expand...
Click to collapse
Oh ok im going to have to buy one are you sure this will fix it?
You could also flash a custom recovery, boot into recovery, mount the phone's internal memory, and copy a ROM to the internal storage. I know I can mount my Nexus 4's internal memory using TWRP even if my phone does not have a ROM.
I see your warranty bit is at 0. Flashing a custom recovery will change it to 1 which will void any remaining warranty on your phone.