Hi,
Hi,
I tried to upgrade my XDA using Ranju's latest ROM, and after going through the flash process ok, my XDA Exec is saying the following on a white screen "Press 0 to restore factory default - Press X to exit"
If i press "0", then the XDA says "clearing now" and switches off and nothing happens, and the XDA switches off altogether if i press "X". If i try the on /off key, nothing happens!!
During the whole process windows is showing "Unknown USB device".
I've removed both the SIM card and SD card and carried out the above.
Can someone please help me out.
Regards
SA
Finally managed to sort. Used the following instructions:
How to update your rom to the latest I-mate version (with push email) and Radio 1.09.0 using the MaUpgradeUt_noID.exe method
1 – download the file “Universal_Upgrade_v1.30.68_radio_1.09.0.zip” from the ftp site (see bottom of post for details)
2 - double click the file and allow it to unpack into a folder
3 – right click on the active sync icon in your tasks tray on you pc (at the stage you should NOT have you universal plugged in)
4 – select connection setting then untick “allow USB connections”
5 – Now take your Universal and take out the SIM and MEMORY CARD
6 – Press light + power + reset with the phone on, this will place the universal into bootloader mode
7 – Connect your Universal via the USB cable to your computer directly i.e. not though a USB hub
8 – Now double click on the program called “MaUpgradeUt_noID.exe” (found in to folder from step 1) this will start the upgrade process, the first stage takes about 3 to 5 minutes to complete, you will then be presented with a screen showing a “Imate Jam” and some information about what you are upgrading to, don’t be worried if this screen does not show you the version numbers you have at present that is normal.
9 – Now continue with the process by clicking upgrade/next
10 – After sometime (about 20 minutes) you should be at the end screen tell you to unplug and reset you “jam” So now unplug your universal and reset it and that’s all there is to it!
Note that during the upgrade process you can follow the progress by also looking at your universal screen with a light source as the backlight will be off.
Many thanks for taking time to read.
SA
Related
dear ladies and gents,
i am new to this forum; i have been using my xda2 for 2 years now and i am more or less up to speed on the how to's. but i have a question on upgrading to wm2005. i deeply apologize if this topic has been discussed before and now here i am again bringing it up...but hear me out first.
i have downloaded ALL the files needed to upgrade to wm2005; the roms (version c) from buzz.net, the ramdisk, doctools, even the skins. so far i know only the following steps (i got this from xda2jojo's downloads). everything.
--------------------
5. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
6. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
7. Run HimaUpgradeUt.exe
8. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
9. Detach your device from the cradle.
10. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
-----------------------
i have successfully done this already but the storage is low. i have done reading and browsing on expanding the storage to 30-plus mb using ramdisk and the doctools. i would like to ask for assistance on how to use these. i read in this forum that you have to use doctools first? it is a little confussing.
please advise how to use these 2 tools together with the steps mentioned above.
again i apologize in advance because i know that this topic has been discussed so much.
pietro
you need to (got this from the forum):
1. Downgrade to WM2003SE (2.06 ROM) via PC method
BUT if you're already running WM2003SE then you don't need to do step one. But at the very least I think your ROM should be 2003SE.
2. Install Extended_ROM Unlocker
3. Unlock the Extended_ROM (but don't click unhide)
4. Copy the Hima_DOC_Tool.exe to the Temp folder on the device
5. Run the Hima_DOC_Tool.exe
6. Perform a soft reset only (not hard reset)
7. Checked the new size (30.07M
8. Upgraded to WM2005 (1.60b.96) via PC method
it worked for me. you may want to also refer to this link:
http://forum.xda-developers.com/viewtopic.php?t=28801
and
http://forum.xda-developers.com/viewforum.php?f=42
these will more or less answer other concerns you might have.
in my case i didn't use ramdisk...but it worked well for me and i'm still using wm2005.
cheers
rob
IT WORKED!
Thank you very, very much for your post! After some experimentation I was finally able to solve the storage problem based on the guide you gave me!
Pietro
Hey guys
I know there's a post nearly the same like this one allready, but i'd like to have a "how to reanimate" and not have the ppl to read 300 posts. The idiot i am i upgraded MDA with USB Hub and disconnected by accident while upgrading....
So here the steps to do
1. get out SD card and SIM
2.try to fix it with another flash, if doesn't work, step 3 (if computer reconizes your universal with active sync DON'T CONTINUE THIS TUTORIAL)
3.try mtty.exe (open active sync, uncheck usb conn, close active sync, terminate wcsmm.exe in task mngr)
4.now put universal in cradle, open mtty.exe
5.where Port1 is, change to usb, connect
6. (don't copy/paste) press "return", enter "set 14 0", press "return"
7.enter "task 28", press "return"
8.enter "task 28 55aa", press "return"
9.close program, disconnect from cradle
10.backlight+power+reset connect to the cradle
11. use ORIGINAL software to update RADIO only, it should work now, or try RUU_TMO_Radio_11200_GER_20060616.exe (http://rapidshare.com/files/97208659/RUU_TMO_Radio_11200_GER_20060616.exe.html)
http://festplatte.aon.at/a/filemanager.get/1710719/RUU_TMO_Radio_11200_GER_20060616.exe
12. upgrade With full version, radio, bootloader and winCE
13. hold both "-" "-"-keys and "reset"
14.WAIt, the screen looks black, maybe it takes 5 minutes, but it worked again =)))))
I did it, after 3 days of trying, thats why i'm so happy =)))
hope it will work same as it worked
~~~~~~~~~~~~~~~~~~~~
**** PROBLEM SOLVED ****
~~~~~~~~~~~~~~~~~~~~
Hi everybody,
I'm using german T-mobile MDApro with 64MB. I had one of your WM6 running. Good work btw! I only had some issues with WLAN an SDHC so I wanted to update.
And now I am in big trouble. I flashed one of your new WM6.1 as I usually did for the last 12 times when everything worked just fine. Bit this time I had error 113 during Extended ROM Udate. I tried and tried and always hat errors during the update process. And then I found out that I connected the device via USB-Hub!!! I know that it is not recommended. So I removed the hub connected the device to PC, but the error will remain the same for all updates and different ROMs.
There is no way to get the unit running again. Always the same: The fist part of update (CE) works fine, but the second part (extendes ROM) don't start. After a few seconds I get "error 113", sometimes I saw "error 114".
When I do a reset to factory defaults the screen remains completely blank (black)
After reset the device shows serial, connecting it to USB it shows USB. I have to do once or twice the [light + on/off + reset] to get it in this mode. Activesync 4.5 is running but doesn't connect or recognize the device.
Any suggestions?
Thank you so much!
some more details...
Bootloader v1.01 start after [power+light+reset]
- serial without USB cable
- usb when cabel is inserted (direct to PC)
MTTY starts and shows USB>
- anything I enter nothing happens on screen. I tried task 28 55aa, screen only shows "usb... v1.01"
Trying to flash original ROM:
- ROM Build starts from 0-100%
- when it tries to store Extended ROM nothing happens until Error 113
- the screen is blank this time (no "usb")
- when I unplug usb-cable screen returns to "serial"
- when I replug usb-cable screen shows "usb" again
BTW: the charge-LED is always off when connected to usb
maybe this helps some of you experts to have an idea?
Did I totally screw up my MDA??
Solution to the Problem
Hi everybody,
I found the solution here in the Forum. So please forgive my double posting
w3rti wrote in his post http://forum.xda-developers.com/showthread.php?t=374564:
So here the steps to do
1. get out SD card and SIM
2.try to fix it with another flash, if doesn't work, step 3 (if computer reconizes your universal with active sync DON'T CONTINUE THIS TUTORIAL)
3.try mtty.exe (open active sync, uncheck usb conn, close active sync, terminate wcsmm.exe in task mngr)
4.now put universal in cradle, open mtty.exe
5.where Port1 is, change to usb, connect
6. (don't copy/paste) press "return", enter "set 14 0", press "return"
7.enter "task 28", press "return"
8.enter "task 28 55aa", press "return"
9.close program, disconnect from cradle
10.backlight+power+reset connect to the cradle
11. use ORIGINAL software to update RADIO only, it should work now, or try RUU_TMO_Radio_11200_GER_20060616.exe (http://rapidshare.com/files/97208659...60616.exe.html)
http://festplatte.aon.at/a/filemanag...R_20060616.exe
12. upgrade With full version, radio, bootloader and winCE
13. hold both "-" "-"-keys and "reset"
14.WAIt, the screen looks black, maybe it takes 5 minutes, but it worked again =)))))
Click to expand...
Click to collapse
I tried the same strings with mtty, but the key was to type it and NOT to copy/paste it. And this time it worked!
And at the end of step 11 there is no feedback on the screen of the pda (blank screen, nothing). So I waited for 10 minutes and gave him a [power-light-reset]
After that my favorite ROM-version did flash all throw the whole process.
Thank you guys
Yehuuuuuuuuuu Oleyyyyyyyyy Jasjarım çalışıyor
I love you
i love you
i love you
i love you
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
................................................................................................................................................................................................................
Hi! i'm italian, sorry for my english
How can I install ARTEMIS & LOVE WM6.1 ROM V35 (BLUE) - Build 20924.1.5.0 (Manila2D) ( http://forum.xda-developers.com/showthread.php?t=440478 )
1. download rom http://rapidshare.com/files/15844826...4_Manila2D.rar
2. open ...manilla2d.rar
3. extract whit password: PhamQuang
4. and now?
P.S.
more simply the guide... i'm italian
thank's
First read this,you HAVE TO DO THIS FIRST!!!
http://forum.xda-developers.com/showthread.php?t=308242
run ROMUpdateUtility.exe and follow the steps?
perhaps you should read/search some topics on flashing...... what does it do and how does it generally work.
edit: the long version of what I just said (from a step-by-step instruction from way back):
OK, I volunteered... This is a detailed list of steps how I installed a new ROM on my MDA Compact III (CID locked, at least I think so). It worked without any errors or problems. I used PDAVIET Black&Blue v2.0. It was my first flash on my Artemis, so I more than understand your need for step-by-step guide
1. download the file Artemis_USPL.zip
2. unpack into the folder c:\USPL
3. download the rom of your choice
4. unpack into the folder c:\ROM
5. soft reset your phone and have it charged over 50% (I have it fully charged)
6. wait until the system starts on your Artemis
7. turn on flight mode (probably not necessary, but I wanted to minimize any risks)
8. connect your Artemis to PC with a USB cable
9. wait until ActiveSync icon in your tray (lower right corner of your windows desktop) turns from gray to green. If you connect your Artemis for the first time to PC, you do not need to set up synchronization, just click "cancel" on the first screen of "Synchronization Setup Wizard"
10. while ActiveSync icon is green, run c:\USPL\start_uspl.exe
11. a DOS screen will pop up with the text "Initializing: 0.." in the bottom indicating probably seconds from the start (it stopped around 70 in my case after about 1.5 min)
12. DOS screen disappears and PDA Phone ROM update utility pops up
13. at the same time, your Artemis turns blank (orange/green LED turns off as well)
14. tick the check box next to " I understand..." and then click Next
15. tick the check box next to " I completed..." and then click Next
16. a box saying "Verifying information on your PDA..." pops up
17. on the next screen click Update button
18. next screen says "Upgrade to ... image version 9.99" - click Next
19. Next screen says "You are now ready to update..." - click Next, a window with a blue progress bar appears with a text "Updating ROM image..", it quickly runs to 100%
20. next screen says "Congratulations! ..." - click Finish
21. your phone turns on and boots into your old system, however it should be CID unlocked now
22. your Active Sync should reestablish and icon turns green again
23. do not touch anything (phone or USB cable) and run C:\ROM\ROMUpdateUtility.exe (make sure activesync icon is green)
24. PDA Phone ROM Update utility window appears, tick the check box next to " I understand..." and then click Next
25. tick the check box next to " I completed..." and then click Next
26. a box saying "Verifying information on your PDA..." pops up
27. on next screen click Update button (says "Current information...")
28. next screen says "Upgrade to ... image version BnB2.0" - click Next
29. Next screen says "You are now ready to update..." - click Next
30. a window with a blue progress bar appears with a text "Updating ROM image..", your Artemis will have light gray screen with blue progress bar showing the progress of flashing - do not touch anything and wait (it took 2-3 minutes on my 3 years old PC)
31. next screen says "Congratulations! ..." - click Finish
32. your Artemis turns on and starts booting, you can disconnect it from PC now
33. the boot screen remains the same (T-Mobile in my case), so do not panic!! it is normal
34. wait until calibrate the screen appears, calibrate, choose time zone and you are ready to use your new OS
35. let me know if this manual was clear enough, whether it helped you and please suggest potential changes for improvement
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
hi there
try thees Steps
1. Run the ROM update program on your PC and go through the installation process until your reach the ‘End User Update‘ window. Leave this running.
2. Go to the Temp file in your Documents. This is usually C:\Documents and Settings\username\Local Settings\Temp but it really depends on how you set up Windows.
3. Look for these 2 files, temp.dat (about 60 MB) and USBDLUpdate_Console.exe (about 4 KB) and copy them to your formatted SD Card using a card reader. You might want to copy these files to another location on your PC before copying it to your card reader if there are problems. Also, rename temp.dat to temp.bin before proceeding to the next step.
4. Put this card into your device and put the device into Bootloader mode. This can be done by pressing (and holding) the power button and voice commander key and then soft resetting. When it restarts, you can remove the stylus but keep your hold on the power and voice commander buttons.
5. The installation will proceed but at a slower rate than if you did it on your PC. This is due to the slower transfer rate between the card and device. It might take about 15-30 minutes so it would be best if your device was connected to the mains charger.
6. Installation is complete when you see this message “USB host is not connected yet“. This is your sign to do a soft reset and setup your device as the ROM installation was successful.
***
you may use this rom
http://rapidshare.com/files/314654442/Eten_X610_WWE.7z
just rename temp.dat to temp.bin put in formatted sd card
and go threw steps 4 to 6
any how you are welcome to
http://www.eten-users.eu/index.php?showforum=52
Hello,
I Tried All Ways & Your Roms On Etenusers
But My Boot Loader Shows a White Screen After Using Magic Numbers Method!
What Can I Do?
My Device Is x610 Samir 020 0702
One An Other That: My Booting With All The Roms That I Tested With Memory Card Method Long Only 4-5 Minutes! Isn't It Wrong?
Aha i got it now
Ok i got it now
I understand your problem
you cant do any thing for your device unless you have another Glofiish device (any model)
because your flasher is corrupted
if you find any working Glofiish device (any model) this is how to do it
1- connect the working device to Active Sync
2- download this tool http://rapidshare.com/files/254487467/UnLock_upgrade.rar
3- put one of my roms in the same folder of the tool.
4- open the upgrade.bat
5- flow the installation steps until the device goes to bootloader
6- now disconnect the working device from usb
7- put your device in boot loader mode connect your device to pc
8- push the update button .
and you are done
any how send me your mobile number as PM and i will call you as long as you are
in ksa
Oh A Big Problem!!!!
I'm In Iran & I Think There Are max 10 Glofiish Device In Iran!!!
Some Time My Boot Loader Work But Only With Sd Card
Isn't Any Other Solution?
I have another problem with x610. After hard reseting the phone after I pressed yes on deleting the files, I got myself callibrating the phone but the callibration stucks forever and it does not passes so the phone wont start...
Is there any solution? Please help as after searching I found nothing as a solution so I am asking here.
can I boot somehow from sd card? I mean formatting the phone?
nephew said:
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
Click to expand...
Click to collapse
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
probir_dev said:
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
Click to expand...
Click to collapse
Hi,
I tried as you said above, when I click YES it showed as bellow
"erase all data and load default ? (Yes)
please wait... "
and nothing had happened and it was showing like that continuously..
What should I do to get back my device?
please help me to sort out this.
thanks in advance..