when i call someone they always say " i cant hear you speak up".....when im talking at normal volume... this is very annoying for me to have to raise my voice to be heard? any tweak? that can fix it?
Maybe you have hardware problem. Somewhere in the net I found mic for dash - something like 5$-10$
there nothing else i could try?? before just replacing the mic?
call recorders can do that sometimes as well... do you have any installed?
I had a similiar issue with my bluetooth headset on one of the older HTC roms. After I reflashed with one of Kavana's roms everything worked fine.
Or, if you are still on your original rom and with the original provider, you could probably just take it to the store and get a new phone, if your warranty is still good, or if you paid for equipment protection.
i wanna flash it to see if that will work but dont know which ROM to choose and how install them.
tennisshoeninja said:
i wanna flash it to see if that will work but dont know which ROM to choose and how install them.
Click to expand...
Click to collapse
May I recommend Rick's 6.1 rom found here or possibly try a hard reset to clear things up.
im gunna sound noob-ish ...but how do i flash it?
Ive had this problem with dash from tmobile as soon as I bought one.
I had to do rma replacement and new one worked fine. I believe it was faulty mic.
Related
Sorry to annoy everybody, I have had my M2000 a while now and there are a few things I would like a hand with.
1) I unlocked the M2000 and am currently using it on O2 pay and go. However I cannot use GPRS, if anybody could help me out by telling me settings and/or how to connect properly I would be very grateful!
2) I am running Windows Mobile SE Version 4.21.1088 (build 14132) are there any upgrades possible at all to be able to use Windows Media Player 10? I don’t mind upgrading operating system as long as it doesn’t cost too much.
3) Is there a way to back up just my text messages from the M2000 so I can have them saved on my computer and/or my 1 GB SD card?
4) Finally (sorry about this) does anybody know why sometimes when I make calls I can’t hear the dial or the person talking but they can hear me? I have checked the volume (I'm not that dumb) but resetting it is the only thing that works, which is pretty annoying.
Thank you very much for your help. I know there are probably a million listings with these answers but if you could direct me to them or give me your own verdict I would very much appreciate it.
Thanks again.
1. do a search in the forum maybe excluded to the networking it forum
search string should be something along these lines "gprs AND payandgo"
or something like that
2
read this
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
3. again search for something like "SMS AND backup"
Thanks for that Rudegar, if anybody else can help me out on this one too, I would really appreciate it. You gave me a link to download WM5, are you currently using WM5, and would you recommend it? I have no programming experience really and it looks quite complicated to install so much so I don’t know what some of the files are etc. will there be an easier version where all you have to do is click a button and it will auto install? You’re the clever one here so ill do whatever you recommend, ill take your word for it. Thanks again Rudegar, if anybody else can help please do.
Thank you.
I have had my M2000 for about 2 months and for about the last month i have also been have the same problem as number 4, where people i call can hear me but i cant hear them, when i fiddle with the volume slider on the side i can sometimes (only sometimes) hear a split second of sound from the other person, its SO annoying having to reset
could be a radiostack issue
maybe an upgrade of it will fix it
also had some issues with my xda2 when people call it sometimes take awhile before they can hear me
the cause of that is bluetooth tools which seem to be trying to direct my call to my bluetooth headset
dont matter if i have a bluetooth headset though it still try take about 10sec before they hear me then
Hmmm, glad to hear I'm not the only one with that problem. It is really annoying though having to reset it when i need to make a call. I'm worried about using a radio update as I don't have a clue about who has made it and what it will do especially if its a con. Where can i go about getting a trusted Radio update? Talking about updates, is there a ROM update available?
Guys install this cab file it will fix your problem..
Or while you don't hear the other party just turn on the BT then turn it back OFF this will solve..
read these pages
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
there you get all you need to know about upgrades of all kind
I have taken a huge risk in installing WM5... Well I'm doing my best anyway. I need some help though.
I have so far got to re-partitioning and formatting my device but whenever I press format an error message comes up saying "Error FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" what the heck does that mean? can anybody help me out?
Big thanks to everybody who has helped me out so far with this and for anybody elce if you can help me, please do.
Thanks.
Anyone know if it is possible to remove a cab file like this after I have installed it? I've loaded it and it seems to have screwed up my pocket pc.
Thanks,
Cian
PHEW!!
I'm so glad i didn't install that cab. I was weary to start with and I'm glad i didn't it appears to be some sort of intruder on a pocket PC which jumbles up the settings. Just for anybody elce who is about to download it, take some advice, DONT PLEASE!!! I'm trying to upgrade my ROM but orange are crappy and dont supply ROM updates yet. Ill try the I-Mate Update. Fingers crossed. Thanks again to everybody who's helped me out!
Hi Guys
I have got a very strange problem.
I have been running LVSV (23-04-2007) firmware for more then a month without any problems. But 3 days ago my Hermes just stopped vibrating with no reason. I didnt install any new software, everything was installed on a day one. I tried to play with settings ( triggered vibra off and on etc.) Just no luck.
So now i am not sure if this is hardware or software problem. I dont want to reflash it just to test this thing. My question is, is there any way to test vibra somehow to identify whether it is software or hardware problem ?
I have the same problem and i think is a hardware problem.
I have flash back to WM5 still no vibrate so don't waste your time to flash.
naydonov said:
Hi Guys
I have got a very strange problem.
I have been running LVSV (23-04-2007) firmware for more then a month without any problems. But 3 days ago my Hermes just stopped vibrating with no reason. I didnt install any new software, everything was installed on a day one. I tried to play with settings ( triggered vibra off and on etc.) Just no luck.
So now i am not sure if this is hardware or software problem. I dont want to reflash it just to test this thing. My question is, is there any way to test vibra somehow to identify whether it is software or hardware problem ?
Click to expand...
Click to collapse
did you happen to drop it? or throw it in a bag? if your handy with small screw drivers take it apart and check the motors...
walshieau said:
did you happen to drop it? or throw it in a bag? if your handy with small screw drivers take it apart and check the motors...
Click to expand...
Click to collapse
No, i didnt drop it. I am very carefull with all my phones. I dont want to open it as it would void my warranty. I will probably flash an original telstra's firmware and will send it to our supplier.
I was hopping maybe there is some secret command which i can run for example from the bootloader to activate the motor. ;-)
Hi all,
I had a dead HTC P3300, which i got it to be dead by converting it from Chinese to English rom. While flashing , it went dead, and after heaps of tries i have finally got it alive!
The problem now is that now the speaker is always on when i use the Phone.
I cannot switch off the speaker, and keep it to ear mode. Even when i press the "Speaker On/Off" the speaker is always on!
Currently loaded B&B3.0 in it. I had put the 3.7 too but that didnt help either.
Please help me guys!
Thanks a lot!
I would also like to know this, cause mine is acting the same way
Mine did the same thing. I suspected it was PhoneAlarm. I removed it from my Today screen, soft-reset, then added it back. This corrected the problem for me.
I havent installed any applications on it till now. its freshly flashed with B&B3.0.
Still problem persists, Please help.
Thanks!
I have exactly the same problem, can you please tell me how you fixed it?
Neozzz said:
I have exactly the same problem, can you please tell me how you fixed it?
Click to expand...
Click to collapse
ive seen this one another forum and the guys have been reflashing the radio rom and that fixes the problems.
check the forum here for the latest update radio rom and install.
Sucess.
Yes, upgrading the Radio part is most likely to fix the issue.
Regards,
Carty..
upgrading the radio rom does not fix the problem, at least not for me.
did any of you use/install the new t-mobile wm6 update?
cause i had/have the same problem on my mda compact 3 and the problems started for me after that update. also posted about it in the dutch release of the t-mobile rom here.
i started getting this fixed by installing other roms, no luck at all.
then i tried flashing another radio rom, seemed lucky but not.
when you install or uninstall any appz after that the speakers are on again for ever.
i tried all kinds of rom releases with the same bad luck, even on of the oldest available wm5 roms, and that wm5 was the only working proper, but when trying another wm6 rom after that the speaker stuff was back again
my phone is now @ t-mobile repair, cause after 2 weeks of testing *a million of different releases or combinations, the problem kept coming back.
so there went something very wrong for me with the t-mobile wm6 update, and it is up to them to fix it, cause the phone came from them and the update to.
i explained the guy in the t-mobile store exactly what is happening and the phone was fixed at least repair said, but luckily he knew how all started (minus the part of the good releases here) and did exactly as i told him "uninstall f-secure" and the speakers where on again, and i guess the only option is going to be a whole new phone (or empty totally fresh rom not touched by that that B&%tch of the wm6 update of t-mobile)
i'm thinking personally that the radio rom in that release has written something to rom that can't be overwritten again or at least in not a proper way, or that release did some to the rom in the phone that corrupted it.
but that is just some guessing from my side, but i have a feeling that my guess is not far from the reality.
for me it's now just hoping t-mobile is fixing this soon or giving me a new phone, cause the words of the the guy in the t-store where "that should never have happened and this falls under warranty for sure"
HarryRag said:
upgrading the radio rom does not fix the problem, at least not for me.
did any of you use/install the new t-mobile wm6 update?
cause i had/have the same problem on my mda compact 3 and the problems started for me after that update. also posted about it in the dutch release of the t-mobile rom here.
i started getting this fixed by installing other roms, no luck at all.
then i tried flashing another radio rom, seemed lucky but not.
when you install or uninstall any appz after that the speakers are on again for ever.
i tried all kinds of rom releases with the same bad luck, even on of the oldest available wm5 roms, and that wm5 was the only working proper, but when trying another wm6 rom after that the speaker stuff was back again
my phone is now @ t-mobile repair, cause after 2 weeks of testing *a million of different releases or combinations, the problem kept coming back.
so there went something very wrong for me with the t-mobile wm6 update, and it is up to them to fix it, cause the phone came from them and the update to.
i explained the guy in the t-mobile store exactly what is happening and the phone was fixed at least repair said, but luckily he knew how all started (minus the part of the good releases here) and did exactly as i told him "uninstall f-secure" and the speakers where on again, and i guess the only option is going to be a whole new phone (or empty totally fresh rom not touched by that that B&%tch of the wm6 update of t-mobile)
i'm thinking personally that the radio rom in that release has written something to rom that can't be overwritten again or at least in not a proper way, or that release did some to the rom in the phone that corrupted it.
but that is just some guessing from my side, but i have a feeling that my guess is not far from the reality.
for me it's now just hoping t-mobile is fixing this soon or giving me a new phone, cause the words of the the guy in the t-store where "that should never have happened and this falls under warranty for sure"
Click to expand...
Click to collapse
Hi Harry
i can understand you had so many problems and i know its not nice, but it is really the radio rom that is at fault, please read this Dutch forum, they have posted this problem a lot and the radio had reported to fix the problem.
link to site is http://gathering.tweakers.net/forum/list_messages/1257926
as for me i dont have the problem, never did, just picking info up from site and trying to help others.
good luck with your phone and i hope you get a repair or a new one back.
fijn weekend
That did happen to me when I used AudioNotes to record calls through speakerphones, and got fixed after I unchecked that option from the software. You could use Resco Audio recorder instead.
@ neil H
that topic is one of my daily views, but also could not find the answer over there.
guess that in my case there went something terribly wrong, and also hope T-mobile will fix it soon, cause can't stand being back on my over aged motorola
jij ook een fijn weekend, nu hopen dat de zon gaat schijnen in NL
I might have to exchange my tilt 2 because the BT doesn't seem to be working properly. Anyone know where to find the oem att tilt to rom installer? all i've been able to find is a "untested" version, and i want to make sure its the same ROM that it was shipped with if i have to return it.
The stock SHIPPED rom isn't available anywhere yet, the cooked stock from herg is the only option right now.
ugh...no wonder i couldn't find it. Well, i download the herg dump that was posted. Anyone think i'll be able to get away w/ using that ROM for a return, or should i just wait until there's an actual leaked/released ATT package available.
The ROM was cooked for warranty return purposes, read the first few pages of the thread, there are a few steps required to take the phone back to stock (ROM, RADIO, SPL).
Whats up with the BT? There may be a fix for it.
stesul411 said:
The ROM was cooked for warranty return purposes, read the first few pages of the thread, there are a few steps required to take the phone back to stock (ROM, RADIO, SPL).
Whats up with the BT? There may be a fix for it.
Click to expand...
Click to collapse
i tried a few different ROMs which led me to think it was a problem w/ the phone itself and not one of the roms. I tried the 10.28 EnergyROMs 6.5.1 and 6.5, TPC 6.5 rom, and an earlier release of the 6.5 EnergyROM as well. All of them had the problems with bluetooth. Basically the phone would sync to a headset, and work just find (playing stereo bluetooth), but after a softreset it would loose the Stereo Audio connection, and i wouldn't be able to playing audio through my headphones anymore. That, and for some reason the tilt 2 keyboard fix wouldn't work with any of the ROMs.
Did you install tomtom nav 7? I installed TT7, the newest version, the one that doesn't mess with the BT and had problems. I uninstalled TT7, went into the registry and deleted anything associated with TT7, soft reset, and my BT works much better now. Aside from that, I wish I could be of more help.
As you can see from my sig this is my third AT&T/HTC phone, and as I recall they all had some initial problems with BT stereo headphones. The problems were in the A2DP software and registry settings.
no TT here. actually, i just noticed that it looks like the phone doesn't recognized any of the AVCTP commands from my headset. i just tried the nov 2 NRG ROM right now, and it was able to play the music over the headphones right after i flashed, but before i installed my sim. It seems that, whenever i update the phones settings (and choose ATT) if then breaks the connection and refuses to reconnect. But either way, even when it was connected its still not able to do any of the AVCTP commands (skip, play, resume, etc).
May be something about your SIM card, AT&T will give you a new sim, no charge. I had them give me one when got my T2.
May be something about your SIM card, AT&T will give you a new sim, no charge. I had them give me one when got my T2. Take your old Tilt or Fuse and just put the SIM in it when you go in. Hell it might clear up your problems.
stesul411 said:
May be something about your SIM card, AT&T will give you a new sim, no charge. I had them give me one when got my T2. Take your old Tilt or Fuse and just put the SIM in it when you go in. Hell it might clear up your problems.
Click to expand...
Click to collapse
i doubt thats it, im using my fuze now...but when i tried uaing my headset on my phone this morning, it kept sayinng bluetooth cannot be turned on.
go ahead and exchange away!
the more tilt 2 exchange requests, the quicker the (re)stocking @ the warranty dept
I really need to get rid of my fuze and have it warranty exchanged!
stesul411 said:
The ROM was cooked for warranty return purposes, read the first few pages of the thread, there are a few steps required to take the phone back to stock (ROM, RADIO, SPL).
Whats up with the BT? There may be a fix for it.
Click to expand...
Click to collapse
maybe i'm too tired, or i skimmed across the pages too quickly, but as far as bringing it back to stop Rom, radio and spl...well, the rom is the herg dump, radio (theres only one for att) so thats pretty much set. i'm assuming all i would have to do is relock it through hardspl. The only thing that has me somewhat worried is the startup screen which has the "test rom" information on it, anyone know if there's an official animation screen....or one that doesn't have that on it.
Hi guys i recently received my Galaxy S6 from sprint that my brother bought on may this year and loved it, but then fell in love with the Note 5 and saved this one on the box. Like i said the phone is exactly the same way it was when he bought it, so damn new! so i was very happy when the phone arrived and i quickly called my brother so that he could have it connected to the sprint network. He did and the phone worked awesome, we even changed the old number he had on that line he connected to my phone and got to call a friend of mine so everything worked, but! The next day i wake up to make a call and as i'm waiting for the 00:00 minutes to start rolling it took about 5 to 9 seconds to appear on screen and when it does, i CANT HEAR THE RING OR THE PERSON WHEN I MAKE A CALL! and so cant the person i'm calling, they get the call, but when they answer it they cant hear me. I tried everything sprint has told me from resetting the phone in many ways and nothing seems to work. Also everything on the phone works, trust me i've tried every test, i can hear on the lower speaker and on the top one also (my brother left a voice message and i could hear it loud and clear) so i know its not the speakers or anything hardware. I've tried everywhere and no one seems to have the answer to my problem can anyone pleaseeeeee help me , this phone is new and nothing is broken in it. I made a test to the microphone and i could record and talk to anyone on messenger, whatsapp, etc... so i know the mic works. Everything works, the only problem is that when YOU WANT TO MAKE A PHONE CALL OR RECEIVE ONE, YOU CANT LISTEN ANYTHING ON THE TOP SPEAKER, neither can the other person hear you. Please anyone :/
Thanks in advance!
I know this is way out there, but make sure you turn Bluetooth off. It may be connecting to a Bluetooth device and expecting you to use that.
Sent from my iPad using Tapatalk HD
Saafir said:
A factory reset is in proper order to rule out a slew of problems you could have run into.
Click to expand...
Click to collapse
already tried this
cruise350 said:
I know this is way out there, but make sure you turn Bluetooth off. It may be connecting to a Bluetooth device and expecting you to use that.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
bluetooth is off
Factory reset isn't going to do it. You need to Odin the latest tar file to clean up whatever you have done to your phone. That will reset you to stock where Factory reset only deletes user data.
Here is the tar file:
File name: G920PVPU3BOJ7_G920PSPT3BOJ7_SPR.zip
Link: https://www.androidfilehost.com/?fid=24269982087002159
md5: fe1d4a7b3ad20f3e79efc7526e95143d
Pm if you need a replacement screen
Hello @cruise350 and thank you for the post. I have some questions before I start on your advice, what exactly do you mean by "odin" the latest tar file? Also, what do you mean by reset me to stock? Stock as in when I bought the phone for the first time or another version of android?
Joby_2zz said:
Hello @cruise350 and thank you for the post. I have some questions before I start on your advice, what exactly do you mean by "odin" the latest tar file? Also, what do you mean by reset me to stock? Stock as in when I bought the phone for the first time or another version of android?
Click to expand...
Click to collapse
Here is a video of how to reset your phone using Odin: https://www.youtube.com/watch?v=tv0BnfpNxEs
The TAR file linked above will reset your phone to the latest Samsung Sprint version, as if you had just bought it from a store. (Including all the latest security patches.)
It is not a customized ROM, it will be "stock." You will not have root, which is something added afterwards. You can find a thread here for how to add that, if you need it.
Same Issue With BRAND NEW PHONE
I am running into the same issue with my fiancee's mom. She bought an S6 from Best Buy last Wednesday and had this problem the next day. We took the phone back to Best Buy, only to have the same problem all over again.
Now that she is on her second phone, she took it into a Sprint store and called Sprint. The Sprint technical people who took her call gave her a code to punch in the dialer, but it has not helped.