Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Hi All,
I bought an italian P3600 WM5, immediately I tried to flash a cooked rom found here in the forum.
So I launched the updating program, clicked next several time, then answered 'YES' to the warning message on the PDA, the program stops on the instant saying:
[ERROR 246] DEVICE NOT RESPONDING
battery is 100%, USB is connected. Don't really know what is the problem. It happens with ALL cooked ROMs in any language
Thanks in advance for your help.
A.
lagigia said:
Hi All,
I bought an italian P3600 WM5, immediately I tried to flash a cooked rom found here in the forum.
So I launched the updating program, clicked next several time, then answered 'YES' to the warning message on the PDA, the program stops on the instant saying:
[ERROR 246] DEVICE NOT RESPONDING
battery is 100%, USB is connected. Don't really know what is the problem. It happens with ALL cooked ROMs in any language
Thanks in advance for your help.
A.
Click to expand...
Click to collapse
I suggest use search function!
Or just read trinityguides:
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
After
[ERROR 246] DEVICE NOT RESPONDING
run upgrade utility again.
Bye
thanks for the prompt answer, sorry for the newbie question
is working now? if not, put your device in bootloader mode (power+camera+reset) then plug in usb cable, and try again. will work.
ady_uaic said:
is working now? if not, put your device in bootloader mode (power+camera+reset) then plug in usb cable, and try again. will work.
Click to expand...
Click to collapse
Hello,
I've a HUGE problem now.
Something goes wrong in the updating process. Now my P3600 is stuck at splash screen.
Completely frozen at the power up!!!
What can I do now ? Can I use (power+camera+reset) in order to retry the ROM update ?
lagigia said:
Hello,
I've a HUGE problem now.
Something goes wrong in the updating process. Now my P3600 is stuck at splash screen.
Completely frozen at the power up!!!
What can I do now ? Can I use (power+camera+reset) in order to retry the ROM update ?
Click to expand...
Click to collapse
Plz watch the instruction on http://trinityguides.info
or use the search function
Trinity stuck in Bootloader, more than one thread....
thanks to all of you!
I saved my Trinity with splxploit
Hi everyone!
I really need help!
my samsung i780 is dead after i flashed the boot part with the eboot from DXHC4!
I already tried everything!
i flashed de boot part with E1, flashed the three parts with the c4 and e1 rom and nothing! the flash process always complete without errors!!
I can acess bootloader without problems, i can also entre the hard reset menu pressing the green , red and power button but when i press space to performe the hard reset nothing happens and i tried to wait several minutes!
when I power on the phone it doens't even show the samsung logo! Just black screen!
I would really apreciate some help!
thank you!
A good challenge for the I780 Specialists
I bet that the solution would be very easy
All the best to you
There are quite a number of answers posted. EFN had already explained too many times. He had said that the bootloader works fine, that's a good start.
Just get the necessary rom from EFN thread, phone rom PUHE1 and the pda rom DXHE1. There is even a tutorial on this in EFN thread (1st post).
g00ndu can you please help find the thread/topic where EFN explaines it, i'm having a hard time finding it!
thank you
I think he is talking about this:
http://forum.xda-developers.com/showthread.php?t=409258&highlight=EFN+PUHE1+DXHE1
download Flashing Guide Tutorial - at the bottom of the 1st post
did exactly as said in the tutorial....
nothing... it seems that the eboot is always the same.....
i don't know what else to do!
g00ndu i can't find the thread you are talking about....
where does EFN talks about the bootloader or a problem like mine??
could you please help me!
thanks!
hellboss said:
g00ndu i can't find the thread you are talking about....
where does EFN talks about the bootloader or a problem like mine??
could you please help me!
thanks!
Click to expand...
Click to collapse
Okay step by step:
Did you downloaded the russian rom i780PUHE1 (eboot+phone+pda)?
Did you downloaded the i780DXHE1 (pda only)?
Follow the tutorial, assuming step 1 to 4 had already been done.
(5) Launch Mirage updater. Select MIRAGE LV image as the profile
(6) Select EBOOT+PDA+PHONE and select the extracted RUSSIAN .img file
(7) Click on DETECT
(8) Switch on the phone while holding the ENTER and FUNCTION buttons (ALT BUTTON)
(9) After the system DETECT message appears, connect the phone via USB to your PC
(10) Wait until the image is written.
Before flashing to the DXHE1 rom first, please try to boot up and see if it works. If it is successful, you will see plenty of gibberish characters. This is EXPECTED, as the rom is russian.
If it doesn't boot up, then I am sorry I won't be able to help you.
Try the above first. Point to note is to choose eboot+phone+pda. Always press detect first before going through the enter+function+power on process.
If it works, please let me know.
g00ndu, thank you very much, but i already done that several times step by step....
but, unfortunately it stays the same....when i power it on it turns on the backlight but the screen remains black and nothing happens...
but thank you very much anyway!
hellboss, I'm sorry about your device. Perhaps it might be a hardware issue. I'm not sure.
While the device may have a black screen, you could try to see if the LED lights work, whether there is a sound after the system boot up. These are important clues to see if it is really hardware issue.
Once again, I wish you could find a solution to your problem.
Hi, i would like to know if it is possible to discover which ROM is installed in the equipment... I mean, the samsung doens't start i can only go into emergency mode,,, is it possible through the pc to discover which ROM is installed on it??
thank you!
hellboss said:
Hi, i would like to know if it is possible to discover which ROM is installed in the equipment... I mean, the samsung doens't start i can only go into emergency mode,,, is it possible through the pc to discover which ROM is installed on it??
thank you!
Click to expand...
Click to collapse
I'm not really sure, but have you try to dump your rom using pdocread, one of the itsutilsbin tools? Meaning get the Part00, Part01 and Part02 raw files which is your rom dump?
If i were you I will try most official rom to rescue the device first. like i780XHC4 that one has all three (healthy and normal) parts.
dogmood i already tried.... but still nothing...
g00ndu , to dump the ROM don't i need to change some values on some key at the pocket pc registry?? if so i can't because the pda doens't start....
P.S-the first time i flashed it i did it on a pc with windows xp but all the time the process was incomplete and i need to turn off the phone and restart the phone, and at the second time was succesful, now i'm doing it on a virtual machine running windows xp pro sp2,,,,, can my problem be related to that??
thank you!
I use a VM for the flashing myself, so this shouldnt cause problems.
If flashing the official rom (EBOOT & Phone & PDA) doesnt work for u then you have to consider the fact that your i780 busted on the hardware level.
The best thing to do now is to claim for warranty and make sure u sent them beack with official rom in your phone (HC4)
Hi EFN,
well I've considered that, and I think that my next move is going to be warranty
but unfortunately the ROM that came with the PDA was not the DXHC4, i bought my samsung in Portugal.
my problem now is that the PDA became dead when i flashed it with the DXHC4 eboot, and now that i can't flash any other ROM i can't put the original ROM, which i have a dump, on it....
so i think that is not going to be accepted on warranty....
honestly i can't discover what went wrong.... I followed every single step of the tutorial to revive a dead i780....
thanks!
P.S-> EFN, I'm a great admirer of your work (samsung i780 ROMs), unfortunately I'm not going to be able to try them......but... anyway keep up the good work!
I believe for as long as the rom on your i780 is an official one (regardless of version), Samsung will honor the warranty. You have to try to know. And of course dont tell them that you have been messing up with flashing this and that
well i think so, if the rom is an official one they will honor the warranty...
that's the why of my question about a way to know the version of the ROM installed on the PDA, but i haven't discover anything...
i guess will just try my luck and send it to warranty!
thanks!
Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia
Do you removed "FWUPDATE"?
pspeter said:
Do you removed "FWUPDATE"?
Click to expand...
Click to collapse
that FWUPDATE troubled me a lot!!!!
No, I didn't. Do you think that could be the problem? I,m going to try.
Thanks
Try to change the rom . Pull out the stylus , Press the reset button and hold the VOLUME DOWN and the right down button . After connect to pc
Hi,
I removed the FWDATE but the problem occurs in the same way.
AM
Armaia said:
Hi,
I removed the FWDATE but the problem occurs in the same way.
AM
Click to expand...
Click to collapse
Try to restore first your original shipped rom and then reflash your own rom.
Hi All,
I have the same problem, I flashed MightygroovyROM, after first boot, it stops, there is only "Touch Diamond" on the screen. I tried hard reset but doesnt work. Since activesync connection couldnt establish, I couldnt do anything.
Anyone know another technique to connect without activesync ? or is there any other way to go back old rom any flaeshing a new rom ?
Best regards
Kag
Armaia said:
Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia
Click to expand...
Click to collapse
Hi all!
I tried to flash my HTC (I had already do that and all was ok), but this time something has gone wrong.
Now I can turn on my phone but when I see the startup screen (black screen it doesn't load windows) it frozen.
Now, I'd like to know if there is a way to change my ROM without Active Sync and without boot the device, just from the internal memory.
Can anyone help me. I've lost my HTC son and I'm still crying
Thank You,
Leo
Try flashing the ROM again or do a hard reset.
If the above does't work try with DiamDowngrader.exe
Just put your Diamond in bootloader mode and start the program.Then follow the instructions on the screen.
If you can't find it I can send it to you.
Hi ivobmw, please send me the software.
Thanks,
Leo
You can flash from bootloader,to get in bootloader hold volume down when the phone is off and you will get to a tricolour screen
connect the usb and flash a rom that is known to be working from the pc like usual
How can i directly flash from from bootloader? Can you help me?
leowap said:
How can i directly flash from from bootloader? Can you help me?
Click to expand...
Click to collapse
Go in bootloader mode (hold volume down when the phone is off)
connect to the pc,start CustomRUU to flash and you are done
Thank you HELI! You saved my Diamond!
leowap said:
Thank you HELI! You saved my Diamond!
Click to expand...
Click to collapse
You are welcome