i messed up my eT9 messing around with it in the registry now i cant type anything at all is there a way i can do like a hard reset or something to restore everyting back to default? if so how do i do this hard reset or something please HELP!
RussianSolja said:
i messed up my eT9 messing around with it in the registry now i cant type anything at all is there a way i can do like a hard reset or something to restore everyting back to default? if so how do i do this hard reset or something please HELP!
Click to expand...
Click to collapse
Hard Reset. Turn Off phone. Press and hold the two left and right soft keys ( the ones above the home and back buttons) and press the power button for 2 seconds. Let go of the power button after two seconds, while still holding the two soft keys until the screen goes black, then press the send button or follow the instructions on the menu
pudgedaddy said:
Hard Reset. Turn Off phone. Press and hold the two left and right soft keys ( the ones above the home and back buttons) and press the power button for 2 seconds. Let go of the power button after two seconds, while still holding the two soft keys until the screen goes black, then press the send button or follow the instructions on the menu
Click to expand...
Click to collapse
Turn off phone all the way just let it boot down? and once its at the black screen then hold the two soft keys? and will this reset my eT9?
RussianSolja said:
Turn off phone all the way just let it boot down? and once its at the black screen then hold the two soft keys? and will this reset my eT9?
Click to expand...
Click to collapse
Well it will hard reset the phone to the original settings for the ROM you installed and i mean all of the settings, not just the et9
pudgedaddy said:
Well it will hard reset the phone to the original settings for the ROM you installed and i mean all of the settings, not just the et9
Click to expand...
Click to collapse
thank u it fixed everything but now i have to reinstall everything all ova again lol.
RussianSolja said:
thank u it fixed everything but now i have to reinstall everything all ova again lol.
Click to expand...
Click to collapse
No prob. anytime.
Related
My right soft key is unresponsive. It works about 1 in 20 presses.
I need to hard reset!! But I cannot get a good key press on the right soft key.
Using the soft keys on the keyboard dosent work either.
Is there an app I can use to hard reset, or maybe a different key combo?
I don't know if I'm pointing out the obvious but try:
START/SETTINGS/SYSTEM (tab)/CLEAR STORAGE
roostaar said:
My right soft key is unresponsive. It works about 1 in 20 presses.
I need to hard reset!! But I cannot get a good key press on the right soft key.
Using the soft keys on the keyboard dosent work either.
Is there an app I can use to hard reset, or maybe a different key combo?
Click to expand...
Click to collapse
That is what AT&T support would have you do.
Thanks for your replies, you are totally correct.
I suddenly remembered that option at work today and the Hard-Reset worked fine.
*...wanders off muttering something about "wood" and "trees"...*
Cheers
Some time back I started having trouble with my right soft key, now it doesn't work at all.
Glad 'Clear Storage' also works as a Hard Reset.
Thanks ach2
Updated Wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
and now the right softkey works again?
softonic123 said:
and now the right softkey works again?
Click to expand...
Click to collapse
No, the right soft key still doesn't work.
I don't expect the right soft key to start working again, I only wanted another way, besides using the soft keys, to do a hard reset.
And 'Clear Storage' works.
berdinkerdickle said:
No, the right soft key still doesn't work.
I don't expect the right soft key to start working again, I only wanted another way, besides using the soft keys, to do a hard reset.
And 'Clear Storage' works.
Click to expand...
Click to collapse
Try dismantling the phone, clean the terminals behind the key and put it back together...maybe its just dirt!
Hey guys,
I had a quick search through the forum here and i couldnt see it posted,
My boss's q9h wouldnt boot up so i had to figure the hard reset function with keys.
Incase anyone needs it:
Turn device off
Press and hold the "E" and "Z" keys
Press Power button once
When screen comes on, let go of "E" and "Z"
Press Power button once again.
There should be a black message atop the screen saying reset activated.
Then wait several minutes while it resets itself to factory.
Hope this helps someone.
thank you very much, got mine done as well
cheers
Thanks MAN..
Thanks man its work
djcreedy said:
Hey guys,
I had a quick search through the forum here and i couldnt see it posted,
My boss's q9h wouldnt boot up so i had to figure the hard reset function with keys.
Incase anyone needs it:
Turn device off
Press and hold the "E" and "Z" keys
Press Power button once
When screen comes on, let go of "E" and "Z"
Press Power button once again.
There should be a black message atop the screen saying reset activated.
Then wait several minutes while it resets itself to factory.
Hope this helps someone.
Click to expand...
Click to collapse
Thanks man its work
djcreedy said:
Hey guys,
I had a quick search through the forum here and i couldnt see it posted,
My boss's q9h wouldnt boot up so i had to figure the hard reset function with keys.
Incase anyone needs it:
Turn device off
Press and hold the "E" and "Z" keys
Press Power button once
When screen comes on, let go of "E" and "Z"
Press Power button once again.
There should be a black message atop the screen saying reset activated.
Then wait several minutes while it resets itself to factory.
Hope this helps someone.
Click to expand...
Click to collapse
thak you man gert job............
thaks
Thanks for the help bro
I have forget the security password,do you know any way to make a hard reset?
hard reset
bratz said:
I have forget the security password,do you know any way to make a hard reset?
Click to expand...
Click to collapse
Turn phone off, hold both soft keys while turning it on, you should get the tricolored screen and go from there. I've heard of one where with the phone off you hold the camera button down and you plug your usb cable and I think you get the tricolored screen also, but don't quote me on the second method , I've only done the first one with the soft key method.
How to hardware reset Touch Pro2?
RHOD100 MFG 32M SS-BC 0.74.1000
I recive answer from HTC:
The way you do a hard reset on a touch Pro 2 is :
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset
Thank you once again for your continued patronage.
Best regards, Europe customer support team HTC Corp. Global Service Division
But, this instruction not work.
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
DaveShaw said:
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
Click to expand...
Click to collapse
Not Work
Does it get to the point where it shows you a reset message on screen?
This is screen
Goran Anicic said:
This is screen
Click to expand...
Click to collapse
From what I've read about the Topaz:
Hold Vol UP and Vol DOWN together (keep them pressed down and do not release). Then press the reset button with the Stylus and hold it for a few seconds, then remove the stylus keeping vol up and down pressed.
Or if the device is off hold down Vol Up and Vol Down (keep them both pressed until you see the message) and then Power On.
A Hard Reset is usually a two button combo whilst the device is powering on (either from a reset or from a cold boot).
Dave
That screen reads like the software is dead due to it being a beta test.
Jacina said:
That screen reads like the software is dead due to it being a beta test.
Click to expand...
Click to collapse
Yep, but you can still Hard Reset and change the date.
Ta
Dave
I have the same problem. Can anybody PM me with a solution to this? Tried all I know and nothing works...
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
And what am I supposed to do with my other four arms whilst I'm doing that?
rb14 said:
And what am I supposed to do with my other four arms whilst I'm doing that?
Click to expand...
Click to collapse
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
daeshawn said:
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
Click to expand...
Click to collapse
Haha, me 2.
Think he meant to say, turn the phone off, hold start call and end call keys and then press power on while holding down the two buttons. Nothing needed with the reset button.
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
yes this is accurate and just so you guys know, this is in the manual lol.
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
There is this saying amongst IT guys... RTFM = Read the ****ing Manual
hehe mostly the answer is closer than u think
Wrong post.
DELETE
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
Manual? Think I threw mine away when I got it Never read the manual
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
Thanks! That did it! Team effort though!
What is this, some pre-release touch pro 2?
Hey guys, anyone else ever had this problem? All of the sudden my phone stopped responding to holding the Power button + End + Send keys. It worked just fine in the past, but all of the sudden stopped for no apparent reason. Both of the keys work just fine when the phone is turned on, so I don't think its a hardware problem. Any ideas? Thanks.
lysergication said:
Hey guys, anyone else ever had this problem? All of the sudden my phone stopped responding to holding the Power button + End + Send keys. It worked just fine in the past, but all of the sudden stopped for no apparent reason. Both of the keys work just fine when the phone is turned on, so I don't think its a hardware problem. Any ideas? Thanks.
Click to expand...
Click to collapse
What are the symptoms? You mean nothing happens, that it just stays off when you press that trio of keys...or does something else happen?
(I assume you know that you can also hard reset by the "Clear Storage" function under Settings>System..)
Hard Reset
The phone must be off before you do a hard reset. You are probably doing this but others may be stuck.
Turn phone off
push send and end and power all at once and hold
push volume up to accept the hard reset when it asks you
Follow instructions on the screen.
MCbrian said:
What are the symptoms? You mean nothing happens, that it just stays off when you press that trio of keys...or does something else happen?
(I assume you know that you can also hard reset by the "Clear Storage" function under Settings>System..)
Click to expand...
Click to collapse
The phone turns on and boots just like normal. I just don't get the tri-color screen.
It's not a big deal for now since I can just use "Clear Storage" as you mentioned, but I am worried that if I ever get to the point where it doesn't boot up then I won't be able to hard reset without flashing.
It just seems weird to me that its not working. I know I am doing it right because I have done it numerous times in the past. Just wondering if anyone ever had a similar issue.
P.S If it means anything I am using a cooked ROM and an updated radio, but I have hard reset a few times after these were installed. The only thing I can think of that I did prior to this is hard reset and did a full restore using Sprite Backup...
Can this be an SPL issue?
same problem...
I had to do a hard reset because i was suck in a endless reboot loop...i did it this way...
send key + end key + power key + reset button all at sametime and do let go until you see the comfirmation..
(hard to hold stylus with my teeth! lol
airpmobile said:
(hard to hold stylus with my teeth! lol
Click to expand...
Click to collapse
That's hardcore
airpmobile said:
I had to do a hard reset because i was suck in a endless reboot loop...i did it this way...
send key + end key + power key + reset button all at sametime and do let go until you see the comfirmation..
(hard to hold stylus with my teeth! lol
Click to expand...
Click to collapse
Thanks, this worked!