Ever since i installed wm6 (black dymond or black 3.1), I can not connect to the internet using wifi.
It show i am connected to my router with good signal, but can not access any web site using IE. I am not connecting thry a proxy.
Can anyone help?
what carrier are you using
Try to disable the proxy and see what happens...long time problem for Cingular/At&t users...
If it's just throught WiFi that you have a problem then go to Settings / Connections / WiFi
Then click on the tab for Network Adaptors and ensure that the drop-down shows ... "My network card connects to: The Internet".
There is another more detailed explanation of this elsewhere in the forums - may need to search to find it.
Multiple proxies...ugh
I'm not sure which proxy you are talking about...but on my WM6, I had to go into the Windows menu -> Programs -> Proxy Manager -> and select Disable Proxy for my Wifi to work. It seems like this program shortcut is independent from "Connections" proxy settings.
Try that and see if it works. It fixed my problem.
wratran said:
Ever since i installed wm6 (black dymond or black 3.1), I can not connect to the internet using wifi.
It show i am connected to my router with good signal, but can not access any web site using IE. I am not connecting thry a proxy.
Can anyone help?
Click to expand...
Click to collapse
I will try the proxy manger.
I do have the connect to "the internet" box checked under Wifi tab.
not linked to black only
After a lot of effort I can now connect to a secure network but have no internet either. With a unsecure network I have no problems with the internet. strange. I have tried a few roms and for me they all share this problem.
I do not have a seperate program for proxy server to disable!!
When I tried the Black Dymond, I downloaded Custals Proxy cabs as I had the same issue. Here it is....
I have black 3 and I have the same problem. When I connect to an unsecure and opened wifi, I am cannot connect with ie. I am getting "page is not found'.
I do not have the proxy manager in programs. I have selected 'internet' for wifi. any solutions?
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html
no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.
Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.
Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too
Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!
go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?
maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay
Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.
I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.
The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account
With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.
have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out
I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.
IE gives "Cannot connect with your current connection settings. To change your connection settings, tap Settings."
Not sure what to do there.
Blackberry Browser gives
"The BlackBerry Browser could not be repaired, please contact your system administrator."
Not sure I should be trying to be using that..
what do I do?
Not sure as I stopped using BB connect a few years ago and shifted to just activesync over the air. I do recall that when you install BB connect and synch with the desktop first time it inserts the proxy settings for your BB server internet access so the problem may be in that area. I'd recommend going into your connection settings and ensuring that they are set to the same a your cellphone service provider settings (i.e. with TMo for example there should be no proxy listed) - it was always the advantage with WM that you could use the BB for email but get to the web and IM without having to go through the corporate firewall off the BB server.
thanks, unchecked the proxy settings, no improvement
You should use the IE browser not the BB browser. You should verify that your connection settings are as per your operators settings. Settings for all of the mobile operators are available on this site.
Ok, I changed "Programs that automatically connect to the Internet should connect using Media Net and it works
I left Programs that automatically connect to a private network should connect using
My Blackberry
Unfortunately it doesn't seemt to automatcially toggle when I close out of IE
I just upgraded to WM6 i can connect using wifi for mail and such but IE wont work. it wont connect. I dont have a data plan currently so i cant/wont test that part out. Any clue as to why IE wont connect like this? o and im also new here, been around a little while but just stayed quit trying to learn more lol.
Same Issue Here
Same problem here after upgrading to wm6 but no subscription for internet access with AT&T:
I can access my email but have no chance to configure the modem for wifi access. It always remains grayed out "Cellular Line (GPRS , 3G).
Here is the steps I took so far:
Settings - Connections - Connections - Taks MEdia Net is selected.
Advanced - Select Networks is set to MEdia Net
Edit - MEdia Net - Enter a name for the connection: MEdia NET > Linksys
Select a modem: "Cellular line (GPRS , 3G) This is where I have problems to select my "Linksys" connection because the Select a modem is grayed out and not changeable.
What did I miss? Why is it downloading my email but IE is not working.
ok, now it works
I must have missed to disable proxy.
Go to Start - Programs - Proxy manager - Disable Proxy
after a few seconds IE should work through your local WiFi connection.
Thanks that fixed everything
Hi, dears!
Q: why I can not use my wireless networks?!
I have two type of wireless network.
I can use both of this networks in my laptop, but I am confused and tired of retrying more and again and again in pocket pc.
===========================
First network is in our faculty:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.12.20 Port:8080
2- And not any more setting is required in this network!
-----------------------------------
Second, in our dormitory:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.0.1 Port:8080
2- In this network anyone has an specific IP for Wireless
Mine is:
IP: 192.168.0.188
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.188
(You maybe know it better than me that this configuration must be set in wireless properties in PC)
3- This network also use user-password that when I open opera or InternetExplorer (In PC), it will ask me for them:
suppose it is: user: 1111 and password: 2222
----------------------------------
In PC, I use both of this networks successfully.
Also I can connect both of them in ppc, (PPC show me "connected"!)
BUT! I cant not use this "connected" network in IE or Opera in PPC, Why?
I am really confused and tired.
----------------------------------
Now, who know what I must do?
Help Me, Just Step By Step!
Becuase I am a simple user of WM, not proffesional!
Extra Information:
Artemis P3300.
WM 6.1 Build 20771.1.4.6
I don't know what kind of more info is needed for describong device situation!
1. Setings-Conections-Conections-Advanced-Select Networks from My ISP changed it to My Work Network, select Edit button Proxy Setings to go and check on This network conects to the Internet button and then OK.
2. In Wifi settings on the card again in Conections (the icon is Wifi) Network Adapters to select The Internet. Ok. Wifi-and restarts it.
Good luck.
Dear, SPGI!
First thank you for answering.
Altought I did many test on this ways before, but I removed all old configurations first, and then I did your advice, but not worked!
I am often (and now) in Dormitory. In dormitory wireless network when I try to load any site IE shows this error: " The page connot be found. Check the name and try again", What is the matter? (In PC in this moment IE must show user-pass window!)
I saw some problem in wireless in this pags that their text was very onfusing for me!
http://forum.xda-developers.com/showthread.php?t=567110
http://forum.xda-developers.com/showthread.php?t=568878
Can I ask, those phone are same as mine? or they have another problem. becuase (I said) I can connect wireless, (altought it is useless yet) but it seems they can not turn their wireless or semi-problems.
-----
Everyone I restart my phone, it shows a message that had not set any data connection, why?
In Setting/Connection/Connection/Manage existing connections/Proxy Setting/Advanced/HTTP/
(I set dormitory wireless network server as 192.168.0.1 and port as 8080 there.)
There are username and passoword also that I think it must be instead of user-pass login that IE in PC will show when I Open IE. But I don not know what is the domain?
Then, If user-pass must be set here, what is the domain?
And if not: where it must be set?
Also, I found this In Setting/Connection/WiFi/Network Adapter/SDIO WLAN Wireless Adapter:
IP and Subnet mask and Default gateway.