http://pl.youtube.com/watch?v=RwPb_kY-W9U
its touchflo 2
its like another UI
its only been working on VGA screens
i think someone has got it close to working on QVGA
and will work on p3300 too?
ady_uaic said:
and will work on p3300 too?
Click to expand...
Click to collapse
kidnamedAlbert said:
its only been working on VGA screens
Click to expand...
Click to collapse
VGA=480x640
QVGA=240x320
P3300 = QVGA
i know that. my question was that if someone can make it working on qvga too, on 320x240 too...
Related
Is it possible to change the LCD of BAs with a VGA resolution???
borjok536 said:
Is it possible to change the LCD of BAs with a VGA resolution???
Click to expand...
Click to collapse
No.
borjok536 said:
Is it possible to change the LCD of BAs with a VGA resolution???
Click to expand...
Click to collapse
ATI W3200 video chipset doesn't support 640x480.
i just installed o2 active from the 1.40 rom for BA onto my wm5.0 BA
this should display if anything in the correct format, but it displays in vga,
i tried to install the o2 active cab from the xda exec rom, but i had vga issues with that, but from the xda2s rom, i wouldnt have thought id have the same issues.
anyone know why this happened????, cos i sure xda 2s with 1.40 rom isnt in vga. :?
joey jojo said:
it displays in vga
Click to expand...
Click to collapse
What do you mean ? Your hardware doesn't
(and never will) support vga.
cr2 said:
joey jojo said:
it displays in vga
Click to expand...
Click to collapse
What do you mean ? Your hardware doesn't
(and never will) support vga.
Click to expand...
Click to collapse
what i mean is, i installed the o2 active taken from the new o2 uk 1.40 rom. this rom is for xda 2s blue angel. this rom isnt for a vga device so should not display vga software.
i installed the o2 active from 1.40 o2 uk to my xda 2s running wm5.0 and it displayed as vga.
i know it does not support it , but when displayed the graphics were way too big to be displayed properly.
i not sure how to explain that any different, do you know what i mean??
i just done a screen shot of what it looks like on my screen............
The graphics display that way because they are larger - they are indented for a display that is higher resolution.
Looks like you have tricked the OS into thinking you are running a VGA display when obviously you are not.
joey jojo said:
i not sure how to explain that any different, do you know what i mean??
Click to expand...
Click to collapse
Ok. I get it. Then you can claim running the
virtual 1600x1200 too
shuffle said:
The graphics display that way because they are larger - they are indented for a display that is higher resolution.
Looks like you have tricked the OS into thinking you are running a VGA display when obviously you are not.
Click to expand...
Click to collapse
i know that, but my point is, they shouldnt, because this o2 active cab was from the o2-uk 1.40 rom, which isnt vga. so it should not display vga for a none vga device.
i tried this with the cab from the xda exec and expected this from that given that it was a vga rom/device.
8)
hi has anyone got a htc home cab that is compatible with hd?
spzero said:
hi has anyone got a htc home cab that is compatible with hd?
Click to expand...
Click to collapse
I've tried the "Big" vga Home from Athena x7510 on my X1 it works fine in portrait but obviously doesn't quite scale enough in landscape. Still usuable though.
http://forum.xda-developers.com/showthread.php?t=423888
thanks thats great
WVGA Default WM 6.5 dialer skin
Hey guys,
after you helped me with a lot of things on my Touch HD and giving me the possibility to use the potential of this nice device even better, i wanted to give something back.
I edited some image files of the standard Windows Mobile 6.5 dialer (just WVGA) and thought I could share them with you.
I did just some basic image editing to fit better with my current phone style.
Hope you like it!
Installation:
Just install the attached cab to your WVGA device and Soft-Reset
Excellent, thanks! Gr8 skin
Just had to change following: HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0'
for some reason, call list is blank- any ideas?
Ctrl+A said:
Excellent, thanks! Gr8 skin
Just had to change following: HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0'
for some reason, call list is blank- any ideas?
Click to expand...
Click to collapse
... bump ...
any solution to the blank call list whith the default phone skin (\Skin\Enabled=0)???
atlaswing said:
... bump ...
any solution to the blank call list whith the default phone skin (\Skin\Enabled=0)???
Click to expand...
Click to collapse
ends up it is not blank, but the text is same colour as background so cannot see the list. tried changing text colour, but could not get to work properly
atlaswing said:
... bump ...
any solution to the blank call list whith the default phone skin (\Skin\Enabled=0)???
Click to expand...
Click to collapse
PocketShield has a fix for this issue. You must change \Skin\Enabled=1 and then change it back via PocketShield settings.
atlaswing said:
... bump ...
any solution to the blank call list with the default phone skin (\Skin\Enabled=0)???
Click to expand...
Click to collapse
+1 for me! Solution please, pro ! Installing PocketShield is not the end-solution!
It's a known issue of WM6.5 default dialer when having HTC Dialer installed. If the ROM is without HTC Dialer included, it works fine!
try this cab
wingman_214 said:
try this cab
Click to expand...
Click to collapse
Thanks, mate. It works like a charm!
wingman_214 said:
try this cab
Click to expand...
Click to collapse
Nice! lol...
Looks good... Thanks!
Best regards
xdabas said:
WVGA Default WM 6.5 dialer skin
Hey guys,
after you helped me with a lot of things on my Touch HD and giving me the possibility to use the potential of this nice device even better, i wanted to give something back.
I edited some image files of the standard Windows Mobile 6.5 dialer (just WVGA) and thought I could share them with you.
I did just some basic image editing to fit better with my current phone style.
Hope you like it!
Installation:
Just install the attached cab to your WVGA device and Soft-Reset
Click to expand...
Click to collapse
Hi, would you be willing to tell me what files I would need to work with in order to create my own dialer? If you would be so kind.
Great work on the WM Dialer, I have been looking for something just like this!
Thanks in advance.
Great Skin. Just what I needed. Thanks!
wingman_214 said:
try this cab
Click to expand...
Click to collapse
Thanks a mil man. you made my day
Just a question, it is possible to develop a ROM that make Diamond work in QVGA mode? I know the diamond screen is natively a VGA (640x480) but if we could make diamond work in 320x240 resolution, there would be more memory and cpu available. A fair compromise IMO.
Is this possible?
what do you mean by by "if we could make diamond draw only half pixels"
running diamond with QVGA resolution???
if yes then look here
http://www.nyditot.com/NVDPage.asp
sheennick123456 said:
what do you mean by by "if we could make diamond draw only half pixels"
running diamond with QVGA resolution???
if yes then look here
http://www.nyditot.com/NVDPage.asp
Click to expand...
Click to collapse
Sorry, my post was a bit confusing I mean running diamond in QVGA mode and use a QVGA Manila version.
The thread title asks a different question lol.
Rael2k said:
Sorry, my post was a bit confusing I mean running diamond in QVGA mode and use a QVGA Manila version.
Click to expand...
Click to collapse
take a look at the link i ve provided
it allows you to do the same
donald-c said:
The thread title asks a different question lol.
Click to expand...
Click to collapse
lol my brain is definitely gone... anyway thanks,I'm going to modify it.
sheennick123456 said:
take a look at the link i ve provided
it allows you to do the same
Click to expand...
Click to collapse
thanks for the link, i'm trying that application right now...
Rael2k said:
Sorry, my post was a bit confusing I mean running diamond in QVGA mode and use a QVGA Manila version.
Click to expand...
Click to collapse
A I expected Sense 2.5 refuses to start in QVGA resolution using Virtual desktop. Anybody can tell me If there is someone who is actually developing a QVGA ROM for the diamond?
Thanks
i think this is a good idea, my brother has a qvga phone (HTC Polaris) with 54mb less ram and 128mhz slower processor speed but runs winmo 6.5.5 and touch flo really smoothely, but in someways i prefer the vga screen such as in opera and tomtom, it makes it much clearer
Rael2k said:
A I expected Sense 2.5 refuses to start in QVGA resolution using Virtual desktop. Anybody can tell me If there is someone who is actually developing a QVGA ROM for the diamond?
Thanks
Click to expand...
Click to collapse
try to install manila 2d (which is QVGA) in it and see if it works
Wow, good idea. Try to use this http://forum.xda-developers.com/showthread.php?t=541750
cubetto said:
Wow, good idea. Try to use this http://forum.xda-developers.com/showthread.php?t=541750
Click to expand...
Click to collapse
Thank you for the link.
Is there any way to force QVGA resolution in WM6.1 tweaking the registry?
good idea. a fourth of the graphics means more available RAM and faster processing, right?
any chef up for the challenge of making a QVGA ROM for the Diamond possibly with M2D v2?
No guinea-pig?
cubetto said:
No guinea-pig?
Click to expand...
Click to collapse
If some chef would consider this project, my Diamond is more than willing to be the first guinea pig!
I don't understand why anyone would want to do this. The Diamond's screen is already small enough as it is!
If you use a lower resolution Manila, you can only see a quarter of the screen, I think. CaptainThrowback have tested HVGA Sense and all was smaller. So not so usable
diamond_lover said:
If you use a lower resolution Manila, you can only see a quarter of the screen, I think. CaptainThrowback have tested HVGA Sense and all was smaller. So not so usable
Click to expand...
Click to collapse
he means that if we make the phone draw 240 x 320 pixels on the screen rather than 480 x 640
ie running the phone at a virtual QVGA resolution
full screen will be occupied but phone will draw less pixels and hence some processor power and ram will be saved at the cost of screen clarity.
I don't think this is possible, and even if it were, it will still be using the same amount of processing power and it would be ugly and pixellated because the image will have to be stretched to occupy the entire screen.
dennisonuy said:
I don't think this is possible, and even if it were, it will still be using the same amount of processing power and it would be ugly and pixellated because the image will have to be stretched to occupy the entire screen.
Click to expand...
Click to collapse
instead i think that the display will be more pixelated but the ram and processor consumption will be lower...is possible there is a software that i saw in another thread like this
Hello everybody,
I use iGo8 (8.3.4.117940) perfectly om my HTC HD2. Now I try to install it on the HTC HD mini of my wife and unfortunaly I get the next error: Failed to open file: ui_igo8\320_480\loading.bmp
By searching the internet I find out I need the SKIN 320x480. It is'nt there!
By now I wonder, is the SKIN 320x480 landscape or portrait? I need portrait
Can anyone help me with that?
hi,you can find only landscape
tzacapaca said:
hi,you can find only landscape
Click to expand...
Click to collapse
hi tzacapaca,
Why is that so? At my HTC HD2 I use it in portrait.
because no one made a portrait skin,but my opinion is that landscape is much better view than portrait,especially that mini has small screen
tzacapaca said:
because no one made a portrait skin,but my opinion is that landscape is much better view than portrait,especially that mini has small screen
Click to expand...
Click to collapse
Oke! But does anybody is able to help me with one.
tzacapaca said:
hi,you can find only landscape
Click to expand...
Click to collapse
Sorry, I think you are wrong!
I have igo 8.3 working in portrait mode!
hello Rocket Chef
can you sent me the data zip file and the sys file you use to make mine igo to work?
thanks in advance
kostas.seres said:
hello Rocket Chef
can you sent me the data zip file and the sys file you use to make mine igo to work?
thanks in advance
Click to expand...
Click to collapse
+1 please thanks.
Hi!
I'm searching for working app of iGo8 for HD mini. I download some apps for mini but they didn't work.. can someone send me link pleasepleasepleaseplease???
Rocket Chef said:
Sorry, I think you are wrong!
I have igo 8.3 working in portrait mode!
Click to expand...
Click to collapse
Hello Rocket Chef !!
You have try to receive TMC information with iGO Primo on your HD Mini...?
(thread about TMC and iGO here)
.... if yes, give me feedback, thank's
Regards, JBS68
No, i never tried to receive TMC on HD mini because i have a PNA.