Hi, my question is : how can i unlock my phone when i have only access to the bootloader.
My phone freezes on second splash screen and i can't put a new firmware cause it's locked (294 invalid vender id). Thanks a lot. ++
not that i know of
also vendor id have nothing to do with sim lock
kinda trikcy for people to help you when you give no info about
what device or rom you use or try to use
the flash exe often comes in versions with _noID.exe in the end thats a good step on the path to flashing with a rom by another operator
Hi, I've got an HTC Mteor mobile phone
I had Firmware 1.32 and i tried to upgrade with 1.34. But firstly i must upgrade the SPL by v1.09. After that i tried to upgrade with 1.34 and i have always the same error : 294 Invalid vender ID.
I tried several roms (1.13, 1.32, 1.34) and i have always the same problem.
I tried also to upgrade the phone by putting the rom on my SD card (BREEIMG.nbh) but it doesn't work (error : not allow).
I don't know what to do. Thanks a lot for your help. ++
Hi, does anyone have an idea about my problem ? Thanks a lot. ++
Hi, nobody can help me ? My mteor isn't working anymore. Please help !
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/102261908/RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Hi Folks,
Firstly many thanks for everyone's freely given time! Great Forum!
There seems to be a lot of confusion about who and what can be flashed with the German official ROM and then with Bepe's creation.
Can we try to clear some of the ambiguity for us simple folk? Might stop some of the repeated questions littering threads in both related artemis sections.
So, many thanks to anyone who can clarify the situation by providing definitive answers to the following questions!
(1) Can an 02 Orbit from, say, the UK or Holland be flashed with either the German and/or Bepe's ROM, even if it is CID Locked (i.e. same devcie and carrier, different country).
(2) Can a non-Orbit O2 device be flashed with either the German or bepe's ROM, even if it is CID Locked (i.e. different devcie but same carrier).
(3) Is there a fall back Rom available for non-German O2 Orbits should the upgrade fail?
Again, many thanks for your time.
Cheers - Adam.
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Pocha said:
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Click to expand...
Click to collapse
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Take a look to this post http://forum.xda-developers.com/showthread.php?t=299154 I tried it, and now I have wm6 on my HTC P3300, it's true that you can't have upgrades to radio or extrom, but meanwhile I can use wm6
kaemon said:
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Click to expand...
Click to collapse
cid = country id i.e. locked to that country/language/vendor thats why cid needs unlocking before flashing diff any of aboves roms.
imei checker
is it just me or is any one on this forum a bit sceptical of a merchant who so brazenly operates their business under the assumption that all potential customers are all fraudsters/criminal scum? is there no - more customer friendly- merchant who can perform this much valued service?
my first serious post!
xan
My HTC has no vendor since I can use all SIMs from different vendors, now I upgraded from HTC Spanish version to HTC WWE version, so Vendor and Language (plus location?) locks are disabled?
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.[/Q
HI I TRY TO FLASH MY HTC P3300 (BRICKED) WITH FACTORY ROMS AND NEGATIVE RESULT THE PROCESS STOP AT 2%.
CAN ANYBODY HELP ?
Click to expand...
Click to collapse
Hello,
I would like to Upgrade my O2 XDA Mini S with Windows Mobile 6 (localized / German version). I hardly searched for such a WM6 Upgrade but there seems to be no final version for my device and german language.
I figured out that there is an WM6 OS Upgrade for the XDA Orbit and XDA Trion (coming soon). Might it be possible to flash only an OS-ROM for WM6 extracted from one of these O2 ROM updates? I was able to extract the OS-Image and I already backed up my current ROM using aWizard. aWizard also supports flashing a single OS-ROM only.
Some people in this forum already said I might brick my device. Is it possible or not to flash the OS ROM? Is it risky to give it a try?
Do you know a final working German Upgrade for the XDA Mini S (Qtek 9100)?
Best Regards
Gabriel
Hello
I am in Bootloader mode right now and I started the updater but it says it can't connect. I see the device in Windows and my Artemis says it sees a USB connection (it says "USB" on the bottom of the screen in the white stripe).
What do I have to do for it to start working for a change?
I think I found the problem: First, it would be wise to close mtty . Then it is important to reboot and after entering Bootloader mode to connect USB not while booting. After trying it a dozen times it suddenly worked.
Please, could someone explain how I can unlock the CID with USPL? It starts the batch, when it's done I have a black screen with the Linux penguin and it says loaded. When the RUU tries to connect, though, the device doesn't respond. So I take it the process doesn't actually get finished...
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Hi I Try To Flash My Htc P3300 (bricked) With Factory Roms And Negative Result The Process Stop At 2%.
Can Anybody Help ?
Just to inform you guys that i tried the USPL Method 3 times and always got an error message UPDATE ERROR (i think it was error number 270 ??).
Well, that was because after the DOS mode went until 100, and the dialog box for the ROM Update Utility appeared, this dialog box ask to wait for the PDA to be activesynced before presing the "UPDATE", so i was waiting for the PDA to reconnect to activesync (while in a black screen mode) before pressing update . THAT was the mistake. Don't wait for it to RE connect to activesync (strange right ?) and just press the NEXT and UPDATE without waiting anything.
THEN it worked i just upgrade to WM6 without VENDOR ID error anymore thanks to the USPL method
just got a dopod m700 for my wife i know it is a g4 ppc hence will this zip file work on it to get the cid unlocked or do i have to follow a similiar procedure as i had to for my wizard
sorry i got my answer
please ignore my earlier question
fout said:
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Click to expand...
Click to collapse
Hi there,
any pointer to this fool-proof way?
A foolish GioVAX
****ed up my artemis with this rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis
(NOT Orbit oder MDAIII)
OR where can i get the original rom to downgrade????
Please help
thanks
Last night I flash my Dopod M700 to WM6 but after reboot it only enter to the boot flash screen showing IPL SPL 1.11 OS 3.7 etc......
I did unlock the CID but the flashing of WM6 seems not ok.
Then I enter to the bootloader mood and flash the WWE WM5.0 of HTC M700 rom. It did turn the M700 back to WM5.0 and then I flash it with WM 6.0 again.
However, I forgot to unlock CID again before flashing. Then now the device stuck in the boot screen with SPL 1.28 OS 3.7 etc......
I still can enter to bootloader mood, but I have tried to heal the device by flashing it with the WWE WM 5.0 rom of HTC M700 again. But it cannot be flashed again!!!! Error message came out that the rom is not for my device!!
Help!!!!!!!!!
Is the wm5 wwe rom the factory rom for your device or are you from another country?
I'm new on this forum and I really need some help .. I tried to change an t-mobile mda compact III rom (wich it was in german) but ended with an bricked phone (( .. If someone can help me ...please .. The device is not even mine; I was trying to help a friend and now I don't know what to do; I really don't have money to send it to imei-check or anything else. The artemis was in german . the problem ,now : was from t-mobile germany or t-mobile austria ? I really don't know beacause the device is second-hand and i don't have who to ask ..
after deep search I lost all my hope in finding an original WM5 ( I think) rom .. not german and not austrian.
So is there an solutin ? because I'm in big panic ...
Thanks a lot in advance guys !
hello,
took this for the windows mobile 6 thread
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/10...06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
i bricked my phone once over and i was able to fix it by this method, i plugged the phone into the computer and entered bootloader mode and i pressed ctrl/alt/delete and found wcescom or something like that and pressed end task.. i then ran the update and it flashed the phone back to normal. after that i ran the Hard SPL program and unlocked the cid and then flashed with a custom rom..
hope this helps.
.kev.
forgot to mention...
dont know anything about german and austrian rom's so you'll have to do a bit of research if those dont work for you...
sorry!
the links don't work (
thanks a lot .. I will try if I can get the roms ....
Im newbie trying to work with my HTC WIZA200 stuck on tri-color bootloader and displays on screen IPL 1.08 and SPL 1.08. I read several issues regarding this but don't know and no ideas what tools I need to used to make this phone to work again.
Please me guys.
WBR
Allen
Hi ,
i am facing some troubles with bootloader
just freezing on Loading screen , nothing happend
and i tried FORMAT
is there any solution ?
plz i really need help
i cant unlock or flash roms
Ok have you done the Hardspl? What are you doing step by step? I am sure you can be helped but we need more info. Are you flashing by sd card or active sync?
actually i am tring to HardSpl but i failed till now
every time i try the to Hardspl, i face the error 260 because of my bootloader freeze on the Loading page
and when i get to the boot loader in general not hardspl also after the tricolor screen, facing the Loading page and freez .
so till now my device is locked .
thx
really guys i need help plz
Did you read post 2 of the hard spl thread? There you can find something about error 260. And why do you need to get into the bootloader when you didn't even have hardspl on you're phone?
actually yes i read the second post and tried everything but couldnt have the hardspl
when i want to run the hardspl my device get into the bootloader and freez