Develop Bugs

Help Pls - After M3100 Upgrade to Duttys WM6 Premium V2 - Issues with receiving calls

I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
http://forum.xda-developers.com/showthread.php?t=303665
I followed the exact instructions as per the following guide
http://www.mrvanx.org/hermes_guide/dutty
Everything went fine and the phone seems to be having no issues apart from the following issue of receiving calls.
My Network - Virgin
ROM Version : WM6.Premium.v2
ROM Date : 17 April 2007
Radio Version : 1.41.00.10
Protocol Version 32.74.7020.18H
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings. The calling person is getting 'The is a fault' or 'Please check the number you have dialed'.
Even I tried to reset as many times.
I even switched the network to using GSM ONLY. But still happening...
But I can make calls with no problem.
Please help

i had the same problem also and im using tmobile(US), but i just used a different rom.

Any other software running on the phone? If so, try uninstalling.

santhoshkumar said:
I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings.
Click to expand...
Click to collapse
Hi
1.Try reflashing it. Some times works after reflashing or
2.Try with another Radio Rom

todd_jg said:
Any other software running on the phone? If so, try uninstalling.
Click to expand...
Click to collapse
I am running the following softwares only
1. TomTom Navigator
2. spbBackup
3. spbWeather
Apart from that none..
I even reflashed the Radio Rom..Still havinng problems..
Found an interesting reading here
http://www.modaco.com/index.php?showtopic=250460
suggesting that it might be the 3G of TMobile UK, but I belive I haven't had the issue for the past 4 monhts having my M3100 with original Orange WM5 ROM.
Thinking of going back to the latest WM5 rom from Orange

Then try as the wise Abo Forat suggested and reflash the ROM - I would re-download it too. (Or try a different one.)

santhoshkumar said:
Thinking of going back to the latest WM5 rom from Orange
Click to expand...
Click to collapse
But plz be careful and read mrvanx downgrade guide otherwise u brick your phone. Still u can try reflashing
Good luck

WM6: Problem with recieving incoming calls

Since I installed WM6 I can´t recieve incoming calls. The phone lights up but nothing more, and when I click on the reception or phone symbol when it lights up it says "no service" (translated from Swedish).
It was also some problems with Active Sync 4.5 since I upgraded, but those problems might just be because I needed to reinstall it.
Does anybody please know how to fix this, otherwise tomorrow it will go to the repair-shop and I will lose 12 days and the order in my life. : (
The sim-card works on another phone and it worked with WM5, and I have tried hard reset and a reinstall of WM6, but the problem persists.
/Danne

Hi,
Did you try to install an offoicial version of WM6 or one of the cooked ones of this board? If the latter did you take all the necessary precautions first eg installing an upgraded bootloader, etc?
If you have not you may have bricked your phone.
Give us a bit more detail so we can see how we can help.
Cheers
WB

hello
I had the same problem when I upgrade to official WM6 HTC rom, the phone don't ring and I loose the network.
I solve the problem with flashing the radio rom with older version.

I put wm6 on my phone the first day I got it. so I don't really know if this was a problem b4 with wm5.
mine only seems to ring my end after about 8 rings from the dialer so I have to get it within 2 rings b4 voice mail kicks in. Ypu think the if I update the radio as well will that help me?
ps. sorry for hi-jacking your topic seemed along the same line.

the same problem with Bouygues telecom!
Hi guys,
vinzcoyote can you tell me which radio version you put? i'm having the same problem with Bouygues telecom after updrading to WM6
thanks for the help.
C. J.

are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.

CrunchyGremlin said:
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
Click to expand...
Click to collapse
Sorry but i'm new to this: whats the "cnguar provisioning cab "?
thanks
CJ

Hi everybody,
Sorry it took a while to answer (sleeping time).
I installed the official version from HTC Europe and it it only the incoming calls that doesn´t work, I can call other people.
THE SOLUTIONS
Two solutions seems to have been offered (below) but I (as Curious Jack) are new to this so could you please elaborate of give a link where I can read more?
Vinzcoyote "I solve the problem with flashing the radio rom with older version"
CrunchyGremlin: cnguar provisioning cab
Thanks so far.
//D

Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps

luckydip said:
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
Click to expand...
Click to collapse
Thanks!
Two concrete solutions.
One last question: I use a Swedish OS - do the radio roms that is under: "Extracted Radio ROMs for your Hermes" work for me? Or only Anglosaxian PDA:s?
/Dan

similar problem discussed here:
http://forum.xda-developers.com/showthread.php?p=1442269#post1442269
in fact Palm Treo 750 (HTC Cheetah) and Hermes are based on the same radio module.
latest Palm Treo WM6 Radio version: 1.47 (Qualcom)
What that Palm utility does is simply downgrading radio to earlier version. This might work for Hermes in bootloader mode as well.
My point is: no need to install hard sspl if one can downgrade to earlier version of radio with _official_ radio downgrade tool.
I will try later and report back.
update: Palm Radio downgrade tool picked up that device is incompatible. no luck so far.

Seems problem is with Bouygues Telecom
Hi Guys,
Got the exact same problem with Bouygues Telecom. I put a Orange Sim card and it is working so I assume the issue comes from Bouygues Telecom.
So that to check, are the french guys all on Bouygues Telecom or are you using other Telco operators?
Frederic

SOLVED : WM6 & HTC Tytn & Bouygues Telecom now working
Guys,
to make it work, you need to flash ROM Radio 1.38 on top of Windows Mobile 6.
ROM Radio 1.38 can be finded at http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms

what version did you use? There are few of them listed on that page:
1.38.00.01
1.38.00.10
1.38.30.10

HELP my PDA not working after Schap's WM6.1 Pro 4.40 Beta ROM

I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................

You must back to return
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
Dear friend,
I know schaps have a fout make by these rom. You must old rom update on your hermes. You must power and sound button pressed than hard reset doen than you if you see a colored screen than can you old version rom update. Sample: Schap'4.31
regards,
Bahadir

thanks for the quick respond

tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
What should you do:
1) READ THE ENTIRE THREAD OF THE ROM BEFORE FLASHING (IF THERE IS BETA SIGN!!!!
2) you can either keep it - it will work if you take off the SIM card and Hard reset the device, then turn off automatic time update from network AND do not try to synchronize the device via AS (taht way the device will know the correct time and block itself again)
3) Flash any other ROM - you do not need Active sync to be working to flah a ROM, just put your device into Bootloader, plug the usb cable and if the bootloader says USB you can flash whatever ROM you want. If you want WM6.1 you can use PDA viet ROM (works without time bomb, but it is not very stable).

The PDA Viet WM6.1 works great after setting PagePool to 6mb instead of the default 4mb. Before doing that, it was extremely buggy and unstable.

Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien

juliengourou311 said:
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
Click to expand...
Click to collapse
Read post #2

TechBill said:
Read post #2
Click to expand...
Click to collapse
Excuse me, i read it but i don"t understand wery well.
I have to take a hard reset , with pressing the power button, but what is the sound button ?
it is the weel on the left side ?

i have the screen with color but during the update i have the error27O "the image file is corrupt..."

juliengourou311 said:
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
Click to expand...
Click to collapse
It telling you what it says .. Image file is corrupt so try a different ROM, like a factory rom for your device.
And did you read the wiki recommending to flashed Hard-SPL on your Hermes before flashing any radio or ROM?

yes i read any.
But i suppose there are problem because i have the same problem with diffrents roms... I 'm trying to resolve the problem...
after few pourcents, it restart and tell this messages

I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...

juliengourou311 said:
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
Click to expand...
Click to collapse
Well did you flash Hard-SPL on it first before flashing any ROM?
You might have to try flashing from SD card now since you can't flash it via usb. It explained in the wiki.
.

Artemis Touch 4.01 Vanilla call problem

Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.

the same
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.

kosiara said:
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
Click to expand...
Click to collapse
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers

Same problem here
Zecanilis said:
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Click to expand...
Click to collapse
Hi Zecanilis,
I encounter the same problem that is described here by user kosiara an Novy
The GSM signal is excellent, but the phone does not work from time to time and when I try to make a call, I get the message "the operation failed". of course nobody can reach me neither... When I do a soft reset everything is back to normal...
This is very anoying and I do not know what to do.
I bought this PDA second hand, with the upgrades already done for me. Since I do not have any personal data or programs on it yet, I wouldn't mind doing a hard reset and installing everything from scratch.
What would you suggest as a stable system OS and ROM versions?
Any help would be much appreciated.
Here are my actual data:
XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.13.0.0
ROM version : Artemis Touch 4.02 WWE
ROM date 4/08/08
Protocol version 4.1.13.52
Model Nr : ARTE 200
WM 6.1 Professional
CE OS 5.2.19199 (Build 19199.1.0.0)
Regards

But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks

Zbootsom said:
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Click to expand...
Click to collapse
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers

Zecanilis said:
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Click to expand...
Click to collapse
Hi, and thanks for your reply.
I am new to this and althought I read many post, I am not sure.
Can I just upgrade the OS Build without flashing a new ROM.?
If Yes, How do I do it...any tutorial?
Thanks

No.
You have to flash a complete new ROM.
Cheers

OK Thanks
Whish me good luck,,,

Good luck and good choose...

!Novy said:
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
Click to expand...
Click to collapse
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.

novy said:
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
Click to expand...
Click to collapse
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.

neilhhardy said:
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
Click to expand...
Click to collapse
Thanks for your answer. Yes, I flashed it twice and I even flashed a factory rom before that. All Artemis Touch roms were fine until 4.01 and 4.02.
So Zecanilis is probably right blaming the OS version for that malfunctions.

New Rom
I have flashed my device using USPL (took me 2 days to setup the program to work with vista drivers). Then I flashed the same ROM I had before (Artemis Touch 4.02 full Red and Black) but with a different OS build. (as Zicanillis advised)
I will use it for a while and let you know if the freezing phone problem has been corrected.
Cheers

One other change that is on my build is page pool.
My page pool is 6 MB, and some Touch and vanilla (included the 4.02 i had) is only 4MB.
In my opinion that could be another issue to test.
My PDA is working just fine now.
Cheers

For me the problem was the OS Build.
I flashed my device with the same 4.02 vanilla but with a different OS buid and the Phoneworks great. Been using for 2 weeks now, never freezes or looses signal.
Cool
Thanks to Zecanillis advice! obrigado !

HP 614 upgrade to Windows Mobile 6.1??

Does anyone upgrade HP 614 to WM6.1?
Thanks!

any updates?

It's rom upgrade.
Thanks to Yevg001 from www.israpda.com
http://rapidshare.com/files/127265775/614c_WM61_19214.rar
pass:israpda.com
Sorry for my broken english.
This is link to post but on russian http://forum.israpda.com/viewtopic.php?p=60290#p60290 and for download you need regestred on forum.
So i think lin to dowmload it's ok!
UnRAR file to SDcard but not SDHC (not work) turn off device.
Push to record + mute buttons both and keep pushed. Push to power button and dismiss.
After you see SDLoder on display put device on table and wait for resume process.
After upgrade wait for windows logo and start yor's device.

Many thanks, I was searching for this for so long!!!
Just a couple of questions
1.It's on english?
2.It's works?
Do you know how to backup the original ROM before update?
thanks

1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!

igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
It works really very well.
Big thanks to Yevg001!!!
Keep up the fantastic work!
If there are any news, please let us know immediately!

This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153

Not work the link.
Please put another link.

muntean.calin said:
Not work the link.
Please put another link.
Click to expand...
Click to collapse
Link from rapishare is working, already downloading , I'll install tomorrow and make a report ASAP.

igorslon said:
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Click to expand...
Click to collapse
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...

Atlus said:
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Click to expand...
Click to collapse
Did you try to activate "receive all incoming beam" under connection settings?

Thanks for report, it doesn't look like a stead version.

bigu1975 said:
Did you try to activate "receive all incoming beam" under connection settings?
Click to expand...
Click to collapse
Many thanks, that was the problem, I think Incoming Beans referred to IR, as per my other device.
It now works great!!!
I recommend the update. :
-More stable
-faster than WM6.0
-SMS threaded

igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
Hi Igor,
I have a 614c since end of March and 3 more around me (of friends) all running on Cellcom SIM. It seems that the ROM does not have Cellcom as a listed service provider.
Since work with HP on a new ROM and have a beta ROM installed on my unit HP asked a few time is there a STD (Sleep Till Death) problem in an Orange SIM, bacause many customers compain about this besides the BT volume and AGC problem. Can you say some thing. Further more, what Hebew are you using on 6 and 6.1.
Thanks
Nir

Hello everyone,
Hi I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance

analyzer.x said:
Hello everyone,
I just purchased the HP iPAQ 612c from Australia, This is my first PDA. So I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
Click to expand...
Click to collapse
Origimal ROM http://forum.xda-developers.com/report.php?p=2374906
And this a new ROM upgrade from Yevg001 www.israpda.com
http://rapidshare.com/files/131025566/WM6.1_19965_19965.rar.html
pass:israpda.com

Hi igorslon,
Thanks for reply.
However, hmm I am not sure how that answers any of my questions, I already have the files from these links, I am just not sure how to use them.
Again how do I begin to create a flash.dio for example?
I came across XDAtools
http://wiki.xda-developers.com/index.php?pagename=CompleteTools
but I am not sure how I can use it to back up my rom to a file.
any practical help please would be much appreciated. Thanks

Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z

ZiCoN said:
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
Click to expand...
Click to collapse
No are the same

Thanks for the quick respons