Develop Bugs

99% T-chinese & S-Chinese ROM here <QTEK 130 ROM>

---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck

Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,

Thanks again , will try today

CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!

The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback

the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker

[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and

i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!

Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want

Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?

thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.

Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight

Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks

How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself

No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,

Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm

T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2

Thanks a lot again. I want the A2DP!!!! Yeah.

mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,

mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.

My "particular" ExtROM.....

Hi...this mine "ExtROM"........I'm use it w/ my last WM6 ROM (based on LVSW's v2.0.1.1)....however i think that it should work on any rom (wm5 too...)
Its "particular".....I have inserted some useful programs BUT...nothing are installed (alias, copied to the device)!!...everything are alredy "installed" to extrom....
I'm created it for me....so, maybe its unuseful for everybody.....
Whatsuppen:
U download this archive.........................ok
Install it as a normal rom-update (HardSPL included).............ok
So....now, after an HardReset, when the "Customization" popup appears, ONLY some shortcuts will be copied into your device (20 kb), and a few registry tweaks will be also installed (1/2 kb)...........but when you'll enter in the "Programs" directory these programs will be present:
WMP Playlist Editor
PocketRAR v3.60
AltTab (from PocketPlus)
Adobe Reader LE
VJOkButton ("JustClick" only, i'm associate it to a button...)
Spb Full Screen Keyboard (not configurable...u can access to it only from "programs" menu's icon) U
IM+ v4.41 (without Today's PlugIn) U
Chronos v3.3 U
Resco Explorer v6.10 + FTP AddOn + ZIP AddOn (without regitry addOn/cript service/today plugIn) U
Resco Photo Viewer Standard v6.33 (without video support) U
SafeMode v2.1 U
SKTools Pro v3.1.9 (only the main program) U
GroupSMS
PIM Backup v2.5
NoData
iContact v0.2 (linked to the "Contacts" icon in Programs folder)
Call Firewall v1.2
CorePlayer v1.1.1 build 1600 (without SPB-support plugin) U
Some settings for these programs
Click to expand...
Click to collapse
Note:
U = ...unregistred!
Conclusion:
10mb of (useful) programs, but only 20kb of device's memory is used!
(update: 11/08/2007)
Tnks to volospin!
ax3l.volospin.com
MIRRORs: (Tnks to DeviLduck!)
http://www.live-share.com/files/252901/ExtROM_Plus_2.0.9.8.rar.html
...or
http://rapidshare.com/files/48320322/ExtROM_Plus_2.0.9.8.rar
Click to expand...
Click to collapse

this extRom, overrite all on original Ext?

psxsnake said:
this extRom, overrite all on original Ext?
Click to expand...
Click to collapse
yes.......

Can you share with us how to do it? Thanks!

Doesn't work with bepe's rom.

...works perfectly w/ any LVSW and mUn ROMs!

ExtRom Plus
this ExtRom working on my Pepes Germany Rom..

Hello AX3L. Is there any way to get this to work with other programs?

Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?

You need to go to the wiki and find the cab which will unhide the extROM for you. Then in the extROM folder click shortcuts

heltem said:
Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?
Click to expand...
Click to collapse
follow the skaramanga's procedure or HARD-Reset your device to start the "Customitation Process"

can you upload to some other site than megaupload and rapidshare?

varma_in_ap said:
can you upload to some other site than megaupload and rapidshare?
Click to expand...
Click to collapse
Where is the rapidshare link?

AX3L, I would like to add some programs to the rom befor installing it, can you give us a guide, and tool as needed?
thanks

...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message

AX3L said:
...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message
Click to expand...
Click to collapse
I was just wondering, how did you create the shortcuts into a cab file? I cannot seem to find your shortcuts.cab only shortcuts.cabtxt? I take it your shortcuts / registry settings are in shourtcuts.cabtxt? How did you create this file?
Also I cannot find your HSDPA /enable line in your config ?

Can ~WinCE Cab Manager create the shortcut/regedit cabs?

Nice Ext rom AX3L!
Could you possibly add the Resco Explorer Registry Add-in to the next one?
Then it would be perfect!

(update: 24/06/2007)
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar[/QUOTE]
am i blind or is there a download on this link?
please confirm my sanity

HI ax3l,
firstly thanks for your input and time, running sweeeetly.
maybe there are different chips for gps though as my m700 only has 'external gps' button??
also ref to your external rom
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar
have tried to use this link but cannot, please put me out of my misery and check it for me.
regards
martin

-NEW- ervius WM6.1 ITA (essential Plus) 3.04-V2

***All links to other roms are deleted, The final ROM-test is only here!***
the last one 19209 is here:
http://forum.xda-developers.com/showthread.php?t=383464
Hi all, finally was solved the kayboard iusee (masibe there are others, I rebuild form begin the ITA WM 6.1,
greetings:
bepe, for all........
eliasweb for processkiller that kills htc processes that remain into memory also after closing...
udk for help, support and friendship...
all italian cookers that partecipate with suggestions and new ideas...
and all you that with tests, made better this rom!
ok, if you want try it and report for all possible bugs.
******************************************************************
here newest version; its same but:
included .NET CF 3.5 and now contacts on HTC Home in today works property....
WM6_1_ITA_essential-Plus-v2.rar
******************************************************************
ADVICE:
in rom is integrated sdconfig tool: if you want install all cabs, at rom flashing, create a folder called sdconfig in your storage card, insert into all cabs, provxml, tsk you want, and at customizing, allc abs will be installed automatically, if you want make all after rom installing, prepare the sdconfig folder with cabs etc.... ang goto "impostazioni->sistema->sdconfig tool", the ppc will reset, and then install all cabs automatically....
WARNING:
don't use "pocketcm keyboard" as external keyboard, it causes fast increase in size into "device.exe"m until you don't have anymore free memory on device....
I hope someone can post to the author about this bug, becouse I liked it but have this bug....
there are others goods keyboard, I can suggest "touchpal" in italian version, is shareware, but works very well, and add new, and unknown for it, words in dictionary!!!
if you want is better first of all (but not necessary!) install DES Hard SPL:
DES_Hard-SPL.TRIN_2.zip
install from windows mobile opened, the ppc stop on boot, repeat the operation, executing again "ROMUpdateUtility.exe" and after ppc remain off, soft reset and wait, now you have also DES HSPL, and then you can flash everithing you want!!
bye!
SERIAL NEED???
here the licenser, so you can use it like you want and disable the nag screen...
(you have to put the license-file, just created, into "\my documents" folder!)
http://rapidshare.com/files/100281765/licenser.rar
P.S.: if licenser give error at startup on yur pc, you need to download also ".NET Framework 2.0"
Working sip change...
http://forum.xda-developers.com/attachment.php?attachmentid=74080&d=1204674676

Downloading, I'll let you know ASAP!

Hi ervius, I'm downloading too. Just curiosity, can you tell us where was the problem with SIP?

need mirror
hi,
I can't Dl from rapidshare.
Can someone help me with a mirror ?
thnks

GDT said:
Hi ervius, I'm downloading too. Just curiosity, can you tell us where was the problem with SIP?
Click to expand...
Click to collapse
the problem for the sip:
maybe uncompatible mui or exe or dll into \oem folder....
to solve I rebuilded all rom form zero.....
bye!

Oh, I tought that the phonepad was still there...
Ok, I've just installed the international PhonePad + SIP change and it works fine.
The "Camera Album" application always asks fot the folder to browser, is this right?

marty_73 said:
Oh, I tought that the phonepad was still there...
Ok, I've just installed the international PhonePad + SIP change and it works fine.
The "Camera Album" application always asks fot the folder to browser, is this right?
Click to expand...
Click to collapse
yes, phonepad, not more inside, and for htc Album solved (maybe forgott inside an old package)
P.S.: for 31 downloaders, I'm upping last rom with also this iusses fixed, wait...

I've found 1 more problem:
- tapping on the screen doesn't produce the click, even if enabled in Impostazioni->Suoni e notifiche
Do you whay TomTom always start with disabled audio (and I have to manually enable it every time)?

Where is the link??

marty_73 said:
I've found 1 more problem:
- tapping on the screen doesn't produce the click, even if enabled in Impostazioni->Suoni e notifiche
Do you whay TomTom always start with disabled audio (and I have to manually enable it every time)?
Click to expand...
Click to collapse
in my last rom (just upping in file sharing service) it works well....
don't ask me anymore of last rom, I deleted it, download fiorst this one (when you have new link) and then we can talk about.
bye!
EDITED: The link to download is ready in 1st post!

Ok, getting it...

I would like to suggest this keyboard, is in italian layout and autocompete words, and black skin.
EDITED: is it that causes memory leak increasing device.exe in memory...

Great !! I test immediately...

with all program closed i ave only 15mb ram free is normal???

marcosorano said:
with all program closed i ave only 15mb ram free is normal???
Click to expand...
Click to collapse
no, see with "getione attività" and switch to "processi" and search for big processes....
maybe "HTC_HDlg.exe" remain in memory sometimes...

ervius said:
no, see with "getione attività" and switch to "processi" and search for big processes....
maybe "HTC_HDlg.exe" remain in memory sometimes...
Click to expand...
Click to collapse
no i ad disabled htc home and on start after 1 minut i ave 70% of ram used i searched in processi the biggest is filesys 11,5 mb

marcosorano said:
no i ad disabled htc home and on start after 1 minut i ave 70% of ram used i searched in processi the biggest is filesys 11,5 mb
Click to expand...
Click to collapse
is pcmkeyboard that increase device.exe....
I've installed phonepad, ezdial and touchpal (shareware) and device.exe doesn't increase...

Hello, I have a system crash by cliccking on SDconfig tool, somebody confirm this?

ok you rigth men.... tank you

Alexmine said:
Hello, I have a system crash by cliccking on SDconfig tool, somebody confirm this?
Click to expand...
Click to collapse
is only a reset.....
hehehhe
to start costumizing then.....
you have to prepare with cabs the sdconfig\ folder into storage card, and then use the tools, only reset the device and next install all cabs by custimizing...
maybe was better to advise with a messagebox before reset...
in next soft release...

Ervius Sd Config Tool final

Anyone can tell me about "Sd Config Tool final" ???
I flashed with ervius light and it seem doesnt work!?!

Tedo said:
Anyone can tell me about "Sd Config Tool final" ???
I flashed with ervius light and it seem doesnt work!?!
Click to expand...
Click to collapse
sd config tool final doesn't have the daemon that start at 1st flash, becouse a lot prefer to choice where install cabs, bwt the tool is on "impostazioni->sistema"

the tool is on "impostazioni->sistema"
Click to expand...
Click to collapse
....ok but tap it and does't work!
Mybe depend the light version?

nope.... try to install the cab in one of my 3ds.... the link pstat into 19209 3d redirect to you to the cab of dsconfig tool, maybe isn't the last version, install that and try, into programs you can find the lnk file now...
bye!

....found it!
Sd Config Tool final:
http://rapidshare.com/files/10201630...Tool-final.cab
(no more need autorun.exe to customize....!!!)
But wath does it do....?
What does it customize.....?
Sorry but I'm very newbbie in this world!

Tedo said:
....found it!
Sd Config Tool final:
http://rapidshare.com/files/10201630...Tool-final.cab
(no more need autorun.exe to customize....!!!)
But wath does it do....?
What does it customize.....?
Sorry but I'm very newbbie in this world!
Click to expand...
Click to collapse
it search all .cab files in your storage card, and list to you, ony have to select the ones you want to install, and it, one step one install for you, you only have to select where: into storage card or into the system folder!

it search all .cab files in your storage card, and list to you, ony have to select the ones you want to install, and it, one step one install for you, you only have to select where: into storage card or into the system folder!
Click to expand...
Click to collapse
....you are a Genius!

Another Awesome Tool by ervius. Thank You! Great time saver.

great tool
Thanks ervius great tool - only problem that I found is when there are long path names for similar cab, they get truncated and unrecognizebles - would be nice to have a horizontal scroll bar
- just a wish, the tool is great and very useful as it is
grazie.ciao

there is, only have to move in upper near vertical scroolbar, papping, you move the pensil on the right side, the orizzontal scroolbar appear!
bye!

ervius said:
there is, only have to move in upper near vertical scroolbar, papping, you move the pensil on the right side, the orizzontal scroolbar appear!
bye!
Click to expand...
Click to collapse
yes by double tapping on the line at the end of the cell name (excell style) will expand the cell to visualize all the carachters and the horizontal scroll bar will appear. thanks again ervius - very very useful tool. ciao

is it possible backup rom on JAsjam ? i want backup before apply the wm6 rom

Hello,
Is it possible backup the rom before apply the rom with touchflo:
http://forum.xda-developers.com/showthread.php?t=388523
I've jasjam/tytn model.
Thanks,
Rom

Hi,
look here.
wfg
starbase64

starbase64 said:
Hi,
look here.
wfg
starbase64
Click to expand...
Click to collapse
tried download. its only 5KB and it says "invalide win32 applications"

rommark said:
tried download. its only 5KB and it says "invalide win32 applications"
Click to expand...
Click to collapse
Open your eyes!!!
You have to read everything, not only the title.
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (empty) SD/MMC/Mini-SD card
- copy 'autorun.exe' to this folder
grab_it_xx.exe / autorun.exe is for windows mobile!!!!
wfg
starbase64

ok I've backedup. and it created the file on my SD card.
now after i installed the new ROM for hermes with the touchflo and wm6...
once i want my rom back. how i restore it?
2) http://forum.xda-developers.com/showthread.php?t=388523 asking for SPL 1.11 installed. how i know if i have it installed?
the built in check tool in this firmware installation cannot recognize the model...
3) how i check if i've also the HARD SPL 1.11?
thanks!

ok, i've installed this new Rom
few more questions:
1) i've made backup of my original one with lang license.. it created dump.bin if i will would like to restore it..how i do it?
2) I've installed this rom. but i cant see too much animiations like cube,slides... as you can see on youtube touchflo's and on diamond/touch series. how i can enable those effects?
3) which is best touchflo rom for JASJAM so far which i must try as new jasjam user who looking for excitements hehe
Thanks a lot!!!