Hello,
I have veary strange problem,when i connect my XDA orbit to usb cable it is charging but no sync with computer, i make hard reset and it not help .
before it i try to charge my xda with NOKIA N70 charger it work ~5 min than stops charging. after it my problem begin...
Now i cant flash any rom :/ i cant do anything... help.
Im having the same problem - phone is charging but no connecting to AS. I'm now going to flash an original T-Mobile rom belonging to my phone via SD card flashing. I just need the orignal Dutch T-Mobile WM6 rom in .nbh format, does anyone know here I can find it? I hope syncing will work after flashing...
jmfvandeven said:
Im having the same problem - phone is charging but no connecting to AS. I'm now going to flash an original T-Mobile rom belonging to my phone via SD card flashing. I just need the orignal Dutch T-Mobile WM6 rom in .nbh format, does anyone know here I can find it? I hope syncing will work after flashing...
Click to expand...
Click to collapse
Hi sorry to tell, but this is not a software issue, the best thing you can do is flash indeed (from SD) the original rom to your phone and send it on repaire, when you are in the warranty the repaire cost is none,
The original rom from T-mobile is on the Officale Web-site from T-mobile.
Link: Here
Good Luck
I think that i Found answer, the reason of this problem was charger, when i test my charger it was "NO NAME" producer i check connectors pin and notice that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Id/key and gnd was connected inside usb mini jack i tkink that will couse burn something im my orbit which was responsable for Active Sync connection :/
ponciusz said:
I think that i Found answer, the reason of this problem was charger, when i test my charger it was "NO NAME" producer i check connectors pin and notice that:
View attachment 76903
Id/key and gnd was connected inside usb mini jack i tkink that will couse burn something im my orbit which was responsable for Active Sync connection :/
Click to expand...
Click to collapse
Yip that's why you need to send it on repaire. because you cannot do anything about it. You will get a brand new board in it. happend with mine to.
Good luck with it!
Related
I just installed windows mobile 2003SE on my xda2 replacing 2003, i had lost com ports 4 and 5 and didnt know how to get them back.
That worked great until i flashed the Ext Rom with my own medley of software. I am now getting messages saying that the sofware i am installing was written for an earlier version (2003) and may not work. Pda then locks up until i do a soft reset then starts without my stuff.
Cut a long story short i want to reinstall factory version of windows mobile 2003... Anyone know a good link to download it?
P.S Tried o2 website but no luck
CHEERS
Cunning plan!!
OK..... So all copies of wm2003 has been banished to hell !!!
Next plan !.. I have another xda2 with wm2003 installed... all i have to do is get a copy from it and install it back on my other xda2!!
Only one problem... dont know how?
The first launch rom is here
ftp://[email protected]/Himalaya/ROM1.03/O2 XDA2 1.03 first Rom/Xda_II_LaunchROM_v10311.zip
I guess its wm 2003
whats the rom no of your other xda2?
rom version 1.72.00wwe
Is this file self loading or do i need some other software... cheers!
NOTE: That file has just come through corrupt... going to try again !
Its self loading after connecting device via activesync but its a much older rom - trying to put my hands on your rom.
It looks like the 1.72 was an upgrade to an older rom
good resource is here http://www.slipstreamsolutions.co.uk/support/rom_updates.htm
You could run the rom 1.31.139 and then the 1.72 update
or backup your 2003 rom on a sd card see here http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62
Thanks mark, been searching all night for it !
Regards chris
chrisbuxton said:
Thanks mark, been searching all night for it !
Regards chris
Click to expand...
Click to collapse
You have to be Sherlock Holmes sometimes chris
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have O2's standard WM6 Rom on my XDA Orbit (with SDHC support installed by cab for my 4gb card) and, after performing a backup, I performed a hard reset in preparation for the install of the new Black & Blue V5 rom. However, it now sits on the boot up screen (see pic). It does this with or without the memory card installed and I have performed further normal and hard resets to no avail - it always sits at this point and goes no further. I left it for 30 minutes so I think it's safe to say there is a problem with it.
Any advice on how to resolve?
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
have you installed the rom using the uspl file? if not, you have bricked your phone and there is no way to unbrick it yourself.
I haven't installed a Rom as of yet but I have installed USPL previously as I haven't always had the O2 Rom on this device. I had the Touch Vanilla on it at one point.
No, what has happened here is at the result of nothing more than a hard reset.
Any advice?
try 2 remove battery and insert back. try to do HR again
can U enter bootloader? if yes, download wm6 ROM again(o2 original) and follow instruction from wiki (How to flash using SD card)
can you get it to boot loader mode?
phsnake said:
can U enter bootloader? if yes, download wm6 ROM again(o2 original) and follow instruction from wiki (How to flash using SD card)
Click to expand...
Click to collapse
Yes, I can get into bootloader but my card is a 4gb and won't work by default as far as I know. Is there any way of doing it by USB? I have my cable connected with the bootloader screen on but it isn't doing anything and when I test it with USPL, it comes back with no device connected.
EDIT - ignore, just seen it can be done. Cheers for the replies all.
remove card at first, then enter btloader, and run Flash(o2 ship). dont do USPL directly - needs 2 install some certifikates before flashing.
Installed B&B V5 on it using bootloader and everything works fine now. Just a few issues with a few things on the restore using Sprite (caused by the differences between WM6 and WM6.1 I suspect) but nothing that couldn't be overcome easily enough.
Cheers for the replies everyone.
Change the language on my touch pro 2...
Today i both my touch pro 2 but it is in Italian language can i change it by installing a new rom? ( i tried installing custom roms but the unlock failed )
Hard SPL your phone BEFORE you change roms...
Fundamental rule that people with bricks seem to ignore....
But I can't hard SPL my phone... it stays at 0 % and then it shows and error and nothing
edit:
Or it says Loading... on the phone and again nothing happens
tonev said:
But I can't hard SPL my phone... it stays at 0 % and then it shows and error and nothing
edit:
Or it says Loading... on the phone and again nothing happens
Click to expand...
Click to collapse
edit2: And then it usually show me 260 error Connection error
how is it that you are ateempting to hard spl your phone? Hopefully you are doing it through active sync. Ensure you have the latest windows mobile device center version and that you unpack the Hard spl and running the correct option from there. Like ultramag69 mentioned, if you keep attempting to flash your device without hspl, you may have no device at all.
I am using sim unlocked htc.
My IMEI is PM me for this
sd card out, sim card out, phone on.
attempting to flash.
downloaded ,installed windows mobile device center
connects.
attempt flash with Rhodium-HardSPL_V2_00R3.exe
automatic flash doesnt work
attempt manual flash
picture of my phone comes up, instruction on flash come up, i agree, continue.
window comes up with 0%
phone screen is still showing 0%
after 6 minutes or so it comes up with UPDATE ERROR.
If you want i can make a video of what i am doing
Better if you eliminate your IMEI from post for security
Anyone help? i love my tp2 but I also want to customize it... at least to change the language...
edit
This is my first TP2 (device ) i have never flashed another htc before !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After many to long flash (could not get worked the desired flash ROM) was the battery empty and could not boot because the flash had failed, I want out of necessity but decided to Nokia mobile phone charger 5V 800mA to use on the + and - from the battery to connect it with a multimeter and charged by 3V to 4.1V.
After using special flash for failed update Defy device working again received and batteries recharged.
This is clearly risky, but could not otherwise because I do not know anyone and have battery backup with Defy.
Problem is still that I went from 2.2 to 2.1 due to the emergency flash procedure and I did not completely go through the emergency procedure may Nandroidbackup because it goes wrong. Unable with Recovery and RDS should receive the proper ROM, do something wrong, but do not now (yet) what.
Sorry for the google translation !
Picture how i did this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can't understand what the problem is buddy. Why don't you repeat the procedure with the correct sbf and a data wipe?
Sent from my MB526 using XDA App
I think he wants to tell ur how to recover from 'Battery Low Cannot Program' thing...
Sent from my V910 4G using xda premium
nogoodusername has right, problem was battery empty en flash corrupted, so can not load battery anymore, and this is the only way for my to get more power to reflash the emergency rom JORDN_U3_97.21.51.sbf android 2.1. But til now the same problems cannot flash the nandroid 2011-06-11.14.14.27.zip from the emergency paket, only the fixed sbf wil flash. And when y try to flash whit RDS lite all roms go rong, no boot only black screen. When try to flash from sd card and CWM recover the WajkIUI_multilang_1.12.16_ICS.zip its hangs after booting on the nice animation screen. Thats why my battery go empty, to long trying in CWM whit wipe cache and data and Dalvik cache to get it run good. But til now no succes.
And find more messages from people whit the same batery problem, so i think maby can help whit this crazy way to load the battery. Thats the reaseon from this post.
Sorry again from typing here, now direct typed no translation used, but stil like flashing not so good (hi)
Now see her on XDA while ym looking for tips to flash "The macgyver method" for the same problem, so there are more with this problem.
[HELP] G532M Can't upload firmware via "DOWNLOAD MODE" since it gets stuck at half!
Hello everybody, first thread on XDA.
I will tell you about my problem since it seems to be unusual.
I have a J2 Prime G532M that one day suddenly when I woke up and I turn on my phone a blue screen with the following message appeared "this phone has been flashed with unauthorized software [...]" this made me confused because my phone had the OFFICIAL ROM and I've never rooted it.
So I downloaded the official rom from Sammobile and I tried to flash it via Odin. The weird issue here is that when I try to flash it it stucks at half of the process. Sometimes at 12% exactly when it arrives at 360mb/3.75gb uploaded to the device. I downloaded two differente roms bc I thought that the first was corrupted, but both of the roms makes the same.
Also, when the phone is in Download Mode after disconnecting and reconnecting the phone to the computer Windows shows me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"The last USB device you connected to this computer malfunctioned, and Windows does not recognize it".
When I first connect the phone everything its OK. After a while (10 seconds approx) the phone stop receiving data from Odin and when I
reconnect it Windows shows that.
What my problem could be? i'm reading all the comments. Thanks in advanced.
Try using another usb cable. Maybe it's because of your usb cable. Because my phone is J2 PRIME SM G532G Variant I was FRP locked by google but then when I try to flash my stock rom via Odin it stucks and stops halfway of the process. So what I did is just changed my USB Cable and it worked for me. Hope it works for you too. There are a lot of options changing your usb cable. Or so I could analyze the real problem here include the logs of your Odin here when it stopped halfway. Copy your Log and paste it here.